Ten male buffalo calves were randomly allotted into five groups of two each. Four groups were fed with cadmium, molybdenum, cadmium-molybdenum, and copper-cadmium-molybdenum respectively for 130 days to determine the ...Ten male buffalo calves were randomly allotted into five groups of two each. Four groups were fed with cadmium, molybdenum, cadmium-molybdenum, and copper-cadmium-molybdenum respectively for 130 days to determine the elements’ metabolic interactions in calves. These results indicated that cadmium and molybdenum could increase the accumulation of molybdenum and cadmium in liver and kidneys in buffalo calves, but copper could not. reduce to normal the levels of molybdenum and cadmium in liver and kidneys caused by cadmium-molybdenum. In addition, we found the copper concentrations in liver and kindeys was significantly greater in treatment calves than in controls.展开更多
This work proposes a new direct flourimetric methodology for cadmium traces quantification based on its association with azo-reagent SPADNS and rhodamine B dye. Experimental variables that influence on fluorimetric se...This work proposes a new direct flourimetric methodology for cadmium traces quantification based on its association with azo-reagent SPADNS and rhodamine B dye. Experimental variables that influence on fluorimetric sensibility were optimized using uni-variation assays. The calibration graph using zeroth order calibration was linear from 0.192 to 1.26 104 μg.L-1, with a correlation coefficient of 0.99. Under the optimal conditions, it was obtained a limit of detection of 0.057 μg.L-1 and a limit of quantification of 0.192 μg.L-1. The method showed good sensitivity, adequate selectivity with good tolerance to foreign ions, and was applied to the determination of trace amounts of cadmium in filters leachates coming from unsmoked, automatically smoked and smokers smoked cigarettes with satisfactory results. The proposed method represents an innovative application of luminescence to metal analysis comparable in sensitivity and accuracy to atomic spectroscopies.展开更多
Atmospheric particulate matters were collected on quartz fibre filters for 24 hours with a low volume sampler from January 2014 to March 2014 at the Southeast Asian mega city (Dhaka, Bangladesh). Particulate matters s...Atmospheric particulate matters were collected on quartz fibre filters for 24 hours with a low volume sampler from January 2014 to March 2014 at the Southeast Asian mega city (Dhaka, Bangladesh). Particulate matters samples were analysed for eleven trace metals with inductively coupled plasma mass spectrometer (ICP-MS) at Cà Foscari University of Venice, Italy. Trace metals were extracted from filters with digestion method using a mixture of HNO3 and H2O2. The average concentration of the determined trace metals of As, Cd, Ni, Cu, Pb, Cr, Fe, Mn, Zn, Sband Se were 3.06, 6.28, 3.77, 11.98, 305.6, 9.2, 2057.0, 42.2, 303.3, 5.47 and 2.43 ng·mDž, respectively. Arsenic concentration is much lower in the atmosphere of Dhaka, though Bangladesh has severe arsenic problem in the ground water. Lead and cadmium concentrations showed decreasing trend in Dhaka compared than previous measurements—but still they have very high levels compared than Europe and USA. There is very limited information for Mn, Sb and Se concentrations in Dhaka air. Correlation studies showed that several trace metals had potential joint sources of origin, e.g., manganese is highly correlated with iron (r2 = 0.97) and nickel (r2 = 0.84), copper (r2 = 0.86);lead with arsenic (r2 = 0.79) and antimony (r2 = 0.78). Enrichment factors analysis was also done with the data base for the respective metals in earth crust and coal fly ash. As and Cu both have combined sources, whereas Cd, Pb and Zn were from coal fly ash.Trace metals concentrations in Dhaka city air were much higher than Europe and USA but comparable or slightly lower than other south Asian countries. This is the first extensive study for the eleven trace metals with ICP-MS in Dhaka, Bangladesh.展开更多
文摘Ten male buffalo calves were randomly allotted into five groups of two each. Four groups were fed with cadmium, molybdenum, cadmium-molybdenum, and copper-cadmium-molybdenum respectively for 130 days to determine the elements’ metabolic interactions in calves. These results indicated that cadmium and molybdenum could increase the accumulation of molybdenum and cadmium in liver and kidneys in buffalo calves, but copper could not. reduce to normal the levels of molybdenum and cadmium in liver and kidneys caused by cadmium-molybdenum. In addition, we found the copper concentrations in liver and kindeys was significantly greater in treatment calves than in controls.
文摘This work proposes a new direct flourimetric methodology for cadmium traces quantification based on its association with azo-reagent SPADNS and rhodamine B dye. Experimental variables that influence on fluorimetric sensibility were optimized using uni-variation assays. The calibration graph using zeroth order calibration was linear from 0.192 to 1.26 104 μg.L-1, with a correlation coefficient of 0.99. Under the optimal conditions, it was obtained a limit of detection of 0.057 μg.L-1 and a limit of quantification of 0.192 μg.L-1. The method showed good sensitivity, adequate selectivity with good tolerance to foreign ions, and was applied to the determination of trace amounts of cadmium in filters leachates coming from unsmoked, automatically smoked and smokers smoked cigarettes with satisfactory results. The proposed method represents an innovative application of luminescence to metal analysis comparable in sensitivity and accuracy to atomic spectroscopies.
文摘Atmospheric particulate matters were collected on quartz fibre filters for 24 hours with a low volume sampler from January 2014 to March 2014 at the Southeast Asian mega city (Dhaka, Bangladesh). Particulate matters samples were analysed for eleven trace metals with inductively coupled plasma mass spectrometer (ICP-MS) at Cà Foscari University of Venice, Italy. Trace metals were extracted from filters with digestion method using a mixture of HNO3 and H2O2. The average concentration of the determined trace metals of As, Cd, Ni, Cu, Pb, Cr, Fe, Mn, Zn, Sband Se were 3.06, 6.28, 3.77, 11.98, 305.6, 9.2, 2057.0, 42.2, 303.3, 5.47 and 2.43 ng·mDž, respectively. Arsenic concentration is much lower in the atmosphere of Dhaka, though Bangladesh has severe arsenic problem in the ground water. Lead and cadmium concentrations showed decreasing trend in Dhaka compared than previous measurements—but still they have very high levels compared than Europe and USA. There is very limited information for Mn, Sb and Se concentrations in Dhaka air. Correlation studies showed that several trace metals had potential joint sources of origin, e.g., manganese is highly correlated with iron (r2 = 0.97) and nickel (r2 = 0.84), copper (r2 = 0.86);lead with arsenic (r2 = 0.79) and antimony (r2 = 0.78). Enrichment factors analysis was also done with the data base for the respective metals in earth crust and coal fly ash. As and Cu both have combined sources, whereas Cd, Pb and Zn were from coal fly ash.Trace metals concentrations in Dhaka city air were much higher than Europe and USA but comparable or slightly lower than other south Asian countries. This is the first extensive study for the eleven trace metals with ICP-MS in Dhaka, Bangladesh.
