With the rapid development of computer technology,network and information technology have been widely used in people’s daily lives,which has brought great convenience to labor and life.At the same time,people are inc...With the rapid development of computer technology,network and information technology have been widely used in people’s daily lives,which has brought great convenience to labor and life.At the same time,people are increasingly dependent on computer technology.In this case,the social demand for computer professionals is increasing.However,due to the rapid changes and continuous updates of computer technology,the training of talents in computer specialty in China is far from meeting the demand and quality requirements of the society for this kind of talents.Colleges and universities are the important departments that cultivate computer professionals and technicians for the society.When cultivating talents in computer specialty,colleges and universities must conform to the requirements of the development of the times,adjust teaching strategies in a timely manner according to the actual needs of the society,build a talent training system,build a practical training teaching system of computer specialty,innovate teaching modes and teaching contents,and improve students’professional skills through perfect practical teaching,so as to ensure that they can skillfully apply computer technology to solve practical problems in the learning process and further improve their employment competitiveness.Therefore,this paper analyzes the practical teaching system of computer specialty,puts forward corresponding solutions to the existing problems,constructs a multi-collaborative practical training system,and implements the system.The implementation results show that the system can better meet the needs of students at different levels,and the results are fairer.Students’recognition and sense of acquisition of courses have also been greatly improved.The accumulated experience and data also provide good support for our continuous improvement of the system in the future.展开更多
[Objective] This study was conducted to evaluate three training systems for Korla fragrant pear trees by comparing the characteristic parameters of light response curve and CO2 response curve, and to provide some theo...[Objective] This study was conducted to evaluate three training systems for Korla fragrant pear trees by comparing the characteristic parameters of light response curve and CO2 response curve, and to provide some theoretical basis for improving the pruning techniques of Korla fragrant pear trees. [Method] The light response curve and CO2 response curve of the trees trained to three systems were measured by LI-6400 portable photosynthesis system. The SPAD value was measured using SPAD-502 chlorophyll meter, and specific leaf weight was calculated, to evaluate the effects of the three training systems. [Result] The CO2 response curves of the three training systems were basically in agreement with their light response curves, but there were some differences in their characteristic parameters. Among the three training systems, the maximum net photosynthetic rate, apparent quantum yield and light compensation point of espalier trained trees were the highest, while their light saturation point was the lowest. The CO2 saturation point of delayed-open central leader trained trees and open center trained trees were 1 752 and 1 665 μmol/mol, both of which were much higher than that of espalier trained trees. In addition, the carboxylation efficiency and photorespiration rate of espalier trained trees were both higher than those of delayed-open central leader trained trees and open center trained trees, while the CO2 compensation point of espalier trained trees was the lowest. The leaf SPAD value of espalier trained trees was the largest, followed by that of open center trained trees, and the leaf SPAD value of delayed-open central leader trained trees was the smallest. In addition, the leaf area and specific leaf weight of espalier trained trees were both the highest, followed by those of open center trained trees. [Conclusion] Among the training systems for Korla fragrant pear trees, the espalier training system had better ability to capture light, higher photosynthetic productivity and strongest adaptability to light environment, and open center training system takes the second place. On the contrary, delayed-open central leader training system has the weakest adaptability to light environment, but it can adapt to a higher CO2 concentration. In summary, for the training of Korla fragrant pear trees, espalier training system, which has the highest theoretical yield, is the best among the three training systems, and delayed-open central leader training system is the worst.展开更多
This study proposes a method of interactive plant simulation modeling which delivers the online simulated results to the field operators and induces them to take proper actions in the case of pre-identified accident s...This study proposes a method of interactive plant simulation modeling which delivers the online simulated results to the field operators and induces them to take proper actions in the case of pre-identified accident scenarios in a chemical plant. The developed model integrates the real-time process dynamic simulation with 3DCFD accident simulation in a designed interface using object linking and embedding technology so that it can convey to trainees the online information of the accident which is not available in existing operator training systems.The model encompasses the whole process of data transfer till the end of the training at which a trainee operates an emergency shutdown system in a programmed model. In this work, an overall scenario is simulated which is from an abnormal increase in the main valve discharge（second）pressure due to valve malfunction to accidental gas release through the crack of a pressure recorder, and the magnitude of the accident with respect to the lead time of each trainee＇s emergency response is analyzed. The model can improve the effectiveness of the operator training system through interactively linking the trainee actions with the simulation model resulting in different accident scenarios with respect to each trainee＇s competence when facing an accident.展开更多
Compared to traditional welding methods, the underwater wet welding is special with many different characteristics due to the unique aqueous environment. It is conducted completely under water by divers and unique wel...Compared to traditional welding methods, the underwater wet welding is special with many different characteristics due to the unique aqueous environment. It is conducted completely under water by divers and unique welding technology is required in the special operation environment. The operating levels of the divers are the key factor to acquire high quality welded joints. In this paper, an underwater wet welding experimental and divers training system is developed to serve divers training and conducting welding experiments. The system consists of life support system, signals real-time monitoring system and communicating system, etc. An underwater butt welding experiment based on welding electrodes is conducted, and the system works well. It proves that the system can guarantee divers welding safely and successfully and high quality weld seam is expected to be acquired.展开更多
Objective:A computer-based STS(simulative training system) in providing pre-hospital trauma care at a disaster site was applied to teaching nursing students in the Second Military Medical University,China.This article...Objective:A computer-based STS(simulative training system) in providing pre-hospital trauma care at a disaster site was applied to teaching nursing students in the Second Military Medical University,China.This article reports on the teaching effectiveness of this system.Methods:Among 92 participants,46 were in the study group and 46 were in the 'control' group. Each student completed a multiple-choice quiz after completing 18 hours(six three-hour sessions) of the study module,and a score was recorded.The simulative training module was completed only by the study group;the 'control' group was assigned in-class discussions for the same amount of time covering the same content as the study group.The final course scores,which included both comprehensive and group task-based tests were compared between these two groups.The study used a descriptive and comparative approach for quantitative data analysis.Tests of independency between the multiple choice scores and the simulation scores were also performed.Finally,anonymous surveys were conducted.Results:The study group performed better than the 'control' group with a significantly higher average score for the group scenario task-based test score,and consequently the study group's final course score was significantly higher than the 'control' group.As per chi-square tests,no significant associations were found between the multiple choice scores and the simulated training scores.The final surveys showed students overwhelmingly agreed that STS training improved their knowledge and skills,their ability to recognize a potential critical event, and their initial response for trauma care at pre-hospital settings.The survey responses of the study group were noteworthy as they indicated that students recognized the importance of simulative training,appreciated the realism of the simulation,and were able to fight/adjust to the stressful feelings in order to focus on the task.Conclusion:Computer-based STS may be an effective teaching model to help students improve their capability in providing pre-hospital trauma care,and in their effectiveness in disaster response.展开更多
On the basis of successful domestic and foreign cases in landscape architecture teaching as well as characteristics of landscape architecture major in Guangdong Ocean University,this paper is to enhance the teaching c...On the basis of successful domestic and foreign cases in landscape architecture teaching as well as characteristics of landscape architecture major in Guangdong Ocean University,this paper is to enhance the teaching characteristics of coast-landscape design,reconstruct the training system of landscape designers,optimize and improve teaching quality in practices.展开更多
In view of the deficiencies of training technologies during constructing pear orchards by modern simplified dense-planting cultivation with ordinary pear seedlings widely used in production,a simple and easy-to-operat...In view of the deficiencies of training technologies during constructing pear orchards by modern simplified dense-planting cultivation with ordinary pear seedlings widely used in production,a simple and easy-to-operate training method was proposed,mainly including constructing fence nets,determining low main trunks,leaving buds at the northwest position,multiple bud removal,winding and notching,simplified branch supporting,and simplified branch pulling.展开更多
This paper focuses on the coupling between talent training system of marine cultural industry and collaborative innovation of govern-ments, enterprises, colleges, scientific institutions and users. Firstly, the signi...This paper focuses on the coupling between talent training system of marine cultural industry and collaborative innovation of govern-ments, enterprises, colleges, scientific institutions and users. Firstly, the significance of talent training in marine cultural industry for the construction of China as a maritime power was analyzed. Secondly, the current situation of talent training in China＇s marine cultural industry and the existing problems were analyzed. Finally, how to integrate the collaborative innovation of governments, enterprises, colleges, scientific institutions and us-ers into the talent training system of marine cultural industry was explored to help talent training to break through the bottleneck and promote the vig-orous development of marine cultural industry.展开更多
It is very important to establish a farmer education and training system for the revitalization of rural talents.This paper analyzed the necessity and new requirements for the construction of a farmer education and tr...It is very important to establish a farmer education and training system for the revitalization of rural talents.This paper analyzed the necessity and new requirements for the construction of a farmer education and training system in the new era.It pointed out the specific path for construction of farmer education and training system from accurately grasping the development direction of farmer education and training,accelerating the construction of a new pattern of farmer education and training,comprehensively promoting the high-quality development of farmer education and training,and actively creating a good atmosphere for farmer education and training,so as to promote the revitalization of rural talents.展开更多
At present,there are a series of problems in the enterprise training system,such as the lack of systematic management,imperfect management and control measures,the lack of scienti＇c evaluation system,and so on.With t...At present,there are a series of problems in the enterprise training system,such as the lack of systematic management,imperfect management and control measures,the lack of scienti＇c evaluation system,and so on.With the rapid development of information technology,the members of the enterprise should not only strengthen their own learning,but also promote each other.The training system of the enterprise should effectively take these needs as the preferred factors to establish and optimize the system.Based on this urgent need,this paper will put forward some thoughts on the optimization of enterprise training system from the perspective of project management.展开更多
The safety production is critical to stable development of Chinese electric power industry. With the development of electric power enterprises, the requirements of its employees are also becoming higher and higher. In...The safety production is critical to stable development of Chinese electric power industry. With the development of electric power enterprises, the requirements of its employees are also becoming higher and higher. In this paper, an optical motion capture system based on the virtual reality technology is proposed to meet the requirements of the power enterprise for the qualified business ability. Electric power equipment, power equipment model entitative operating environment and the human model are established by electric power simulation unit, ZigBee technology and OpenGL graphics library. The problem of missing feature points is solved by applying the human model driven algorithm and the Kalman filtering algorithm. The experimental results show that it is more accurate to use Kalman filtering algorithm to extract the feature point in tracking process of actual motion capture and real-time animation display. The average absolute error of 3D coordinates is 1.61 mm and the average relative error is 2.23%. The system can improve trainees’ sense of experience and immersion.展开更多
This paper is devoted to development and study of models for operator training systems of heating power station processes management. It proposed a mathematical model describing the management processes of heating pow...This paper is devoted to development and study of models for operator training systems of heating power station processes management. It proposed a mathematical model describing the management processes of heating power units of the technological complex considering the relationship of technological variables in deviations effective in real time. A software complex is developed for the system of training of operators controlling processes in heating station units. Obtained results may be used in the course of development of computer training systems for operators of heating power stations with cross-linkage.展开更多
Virtual reality(VR) training technology in the mining industry is a new field of research and utilization.The successful application of VR training system is critical to mine safety and production. Through the statist...Virtual reality(VR) training technology in the mining industry is a new field of research and utilization.The successful application of VR training system is critical to mine safety and production. Through the statistics of the current research and applications of VR training systems in mining industry, all the input/output devices are classified. Based on the classifications of the input/output devices that are used in the VR system, the current VR training systems for the mining industry could be divided into three types: screen-based general type, projector-based customized type, and head-mounted display(HMD)-based intuitive type. By employing a VR headset, a smartphone and a leap motion device, an HMDbased intuitive type VR training system prototype for drilling in underground mines has been developed.Ten trainees tried both the HMD-based intuitive system and the screen-based general control system to compare the experiences and training effects. The results show that the HMD-based system can give a much better user experience and is easy to use. Three of the five components of a VR training system,namely, the user, the tasks, and software and database should be given more attention in future research.With more available technologies of input and output devices, VR engines, and system software, the VR training system will eventually yield much better training results, and will play a more important role in as a training tool for mine safety.展开更多
With deep development of state grid’s system of "Three Sets of Five [1]", China is in urgent need of establishing an appropriate type of simulation system to rapidly improve operation efficiency and the lev...With deep development of state grid’s system of "Three Sets of Five [1]", China is in urgent need of establishing an appropriate type of simulation system to rapidly improve operation efficiency and the level of maintainers, which aim at the integrated operation of substation operation and maintenance service. This article gives an introduction of a simulation training system which is designed for operation-skills training in electrical systems. By the composition of the multiple subjects and skills training for operations staff, this system can provide human guarantee and intellectual support for the "Big-Centralized Overhal".展开更多
Based on domain specified language mechanism(DSLM),the architecture of the robotic training system for the rehabilitation of children with cerebral palsy(CP)is designed.Application of human-computer interaction(HCI)mo...Based on domain specified language mechanism(DSLM),the architecture of the robotic training system for the rehabilitation of children with cerebral palsy(CP)is designed.Application of human-computer interaction(HCI)motion recognition technology is combined with Kinect to improve the effect of cerebral palsy rehabilitation training.In this system,Kinect's bone recognition method is used to judge the patient's training movements,and the collected bone movement information is judged.The human-computer interaction function is based on the Microsoft foundation classes function of Visual Studio based on DSLM development,which can realize real-time interactive training and evaluation of people and actions,and record the training information of patients.The system combines the designed small game to train the upper limb movement ability and reaction ability of the cerebral palsy patient,and provides key technology for improving the cerebral palsy rehabilitation training system.展开更多
Background Compared with traditional thoracotomy,video-assisted thoracoscopic surgery(VATS)has less minor trauma,faster recovery,higher patient compliance,but higher requirements for surgeons.Virtual surgery training ...Background Compared with traditional thoracotomy,video-assisted thoracoscopic surgery(VATS)has less minor trauma,faster recovery,higher patient compliance,but higher requirements for surgeons.Virtual surgery training simulation systems are important and have been widely used in Europe and America.Augmented reality(AR)in surgical training simulation systems significantly improve the training effect of virtual surgical training,although AR technology is still in its initial stage.Mixed reality has gained increased attention in technology-driven modern medicine but has yet to be used in everyday practice.Methods This study proposed an immersive AR lobectomy within a thoracoscope surgery training system,using visual and haptic modeling to study the potential benefits of this critical technology.The content included immersive AR visual rendering,based on the cluster-based extended position-based dynamics algorithm of soft tissue physical modeling.Furthermore,we designed an AR haptic rendering systems,whose model architecture consisted of multi-touch interaction points,including kinesthetic and pressure-sensitive points.Finally,based on the above theoretical research,we developed an AR interactive VATS surgical training platform.Results Twenty-four volunteers were recruited from the First People's Hospital of Yunnan Province to evaluate the VATS training system.Face,content,and construct validation methods were used to assess the tactile sense,visual sense,scene authenticity,and simulator performance.Conclusions The results of our construction validation demonstrate that the simulator is useful in improving novice and surgical skills that can be retained after a certain period of time.The video-assisted thoracoscopic system based on AR developed in this study is effective and can be used as a training device to assist in the development of thoracoscopic skills for novices.展开更多
In this study, Virtual Reality (VR)-based plastic injection molding training system (VPIMTS), which can be modeled as an integrated system with a task planning module, an intelligent instruction module, a simulation m...In this study, Virtual Reality (VR)-based plastic injection molding training system (VPIMTS), which can be modeled as an integrated system with a task planning module, an intelligent instruction module, a simulation module, and virtual envi-ronment (VE) module, was developed. Presented in this paper are an architecture of VPIMTS, a practical knowledge modelling approach for modelling the training scenarios of the system by using Petri nets formalism and key techniques (FEM, injection molding procedure modelling) which have been developed independently. The utilization of the Petri net model realized the environment where the trainee can behave freely, and also made it possible to equip the system with the function of showing the next action of the trainee whenever he wants. The overall system is a powerful approach for highly improving the trainee’s comprehension and injection molding study-efficiency by building digital, intelligent, knowledgeable, and visual aids.展开更多
Construction of talent training system in marine cultural industry in developed countries was introduced firstly,and then the enlightenment of talent training in marine cultural industry in developed countries to Chin...Construction of talent training system in marine cultural industry in developed countries was introduced firstly,and then the enlightenment of talent training in marine cultural industry in developed countries to China was analyzed,such as changing the development consciousness of marine cultural industry,strengthening the construction of professional teaching staff in marine cultural industry,and innovating the talent training modes of marine cultural industry.展开更多
"Semester Training"has been adopted as an important part of the personnel training in software engineering majors since it was first put forward.The ultimate goal of semester training is to improve the profe..."Semester Training"has been adopted as an important part of the personnel training in software engineering majors since it was first put forward.The ultimate goal of semester training is to improve the professional quality of students in an all-round way,then eventually achieve the goal of satisfactory employment for both students and enterprises.However,in order to achieve the above purpose,the design of traditional training project still has the following problems:the topic selection of traditional training is designed by teachers in college,which lacks the training of engineering ability aiming at practical problems;the content and technology of traditional project training are out of date,ignoring the urgent demand of software industry development for advanced technology application;the traditional project training inspects the mastery of knowledge in each semester Degree,ignores the incremental of a progressive training system.In view of the above problems,this study proposes an Application-Oriented Software Engineering Semester Training System.Practice has proved that the construction of the training system can effectively improve the quality of teaching,so as to further improve the comprehensive quality of students.展开更多
Nowadays, Health Care Training-based System (HCTS) is a vital component in the education and training of health care in 3D Virtual Environment (VE). The practice of HCTS continues to grow at rapid pace throughout all ...Nowadays, Health Care Training-based System (HCTS) is a vital component in the education and training of health care in 3D Virtual Environment (VE). The practice of HCTS continues to grow at rapid pace throughout all of the healthcare disciplines, however research in this field is still in its early stage. Increasingly, decision makers and developers look forward to offer more sophisticated, much larger, and more complex HCTS to serve the desired outcome and improve the quality and safety of patient care. Due to the rapidly increasing usage of personal mobile devices and the need of executing HCTS applications in environments that have no previous network infrastructure available, Mobile Health Care Training-based System (MHCTS) is an expected future trend. In such systems, medical staff will share and collaborate in a 3D virtual environment through their mobile devices in an ad-hoc network (MANET) in order to accomplish specific missions’ typically surgical emergency room. Users are organized into various groups (Radiologists, Maternity departments, and General surgery etc...), and need to be managed by a multicast scheme to save network bandwidth and offer immersive sense. MHCTS is sensitive to networking issues, since interactive 3D graphics requires additional load due to the use of mobile devices. Therefore, we need to emphasize on the importance and the improvement of multicast techniques for the effectiveness of MHCTS and the management of collaborative group interaction. Research so far has devoted little attention to the network communication protocols design of such systems which is crucial to preserve the sense of immersion for participating users. In this paper, we investigate the effect of multicast routing protocol in advancing the field of Health care Training-based System to the benefit of patient’s safety, and health care professional. Also, we address the issue of selecting a multicast protocol to provide the best performance for a particular e-health system at any time. Previous work has demonstrated that multicast operates at least as efficiently as traditional MAODV. A comprehensive analysis about various ad-hoc multicast routing protocols is proposed. The selection key factors for the right protocol for MHCTS applications were safety and robustness. To the best of our knowledge, this work will be the first initiative involving systematic literature reviews to identify a research gate for the use of multicast protocol in health care simulation learning community.展开更多
文摘With the rapid development of computer technology,network and information technology have been widely used in people’s daily lives,which has brought great convenience to labor and life.At the same time,people are increasingly dependent on computer technology.In this case,the social demand for computer professionals is increasing.However,due to the rapid changes and continuous updates of computer technology,the training of talents in computer specialty in China is far from meeting the demand and quality requirements of the society for this kind of talents.Colleges and universities are the important departments that cultivate computer professionals and technicians for the society.When cultivating talents in computer specialty,colleges and universities must conform to the requirements of the development of the times,adjust teaching strategies in a timely manner according to the actual needs of the society,build a talent training system,build a practical training teaching system of computer specialty,innovate teaching modes and teaching contents,and improve students’professional skills through perfect practical teaching,so as to ensure that they can skillfully apply computer technology to solve practical problems in the learning process and further improve their employment competitiveness.Therefore,this paper analyzes the practical teaching system of computer specialty,puts forward corresponding solutions to the existing problems,constructs a multi-collaborative practical training system,and implements the system.The implementation results show that the system can better meet the needs of students at different levels,and the results are fairer.Students’recognition and sense of acquisition of courses have also been greatly improved.The accumulated experience and data also provide good support for our continuous improvement of the system in the future.
文摘[Objective] This study was conducted to evaluate three training systems for Korla fragrant pear trees by comparing the characteristic parameters of light response curve and CO2 response curve, and to provide some theoretical basis for improving the pruning techniques of Korla fragrant pear trees. [Method] The light response curve and CO2 response curve of the trees trained to three systems were measured by LI-6400 portable photosynthesis system. The SPAD value was measured using SPAD-502 chlorophyll meter, and specific leaf weight was calculated, to evaluate the effects of the three training systems. [Result] The CO2 response curves of the three training systems were basically in agreement with their light response curves, but there were some differences in their characteristic parameters. Among the three training systems, the maximum net photosynthetic rate, apparent quantum yield and light compensation point of espalier trained trees were the highest, while their light saturation point was the lowest. The CO2 saturation point of delayed-open central leader trained trees and open center trained trees were 1 752 and 1 665 μmol/mol, both of which were much higher than that of espalier trained trees. In addition, the carboxylation efficiency and photorespiration rate of espalier trained trees were both higher than those of delayed-open central leader trained trees and open center trained trees, while the CO2 compensation point of espalier trained trees was the lowest. The leaf SPAD value of espalier trained trees was the largest, followed by that of open center trained trees, and the leaf SPAD value of delayed-open central leader trained trees was the smallest. In addition, the leaf area and specific leaf weight of espalier trained trees were both the highest, followed by those of open center trained trees. [Conclusion] Among the training systems for Korla fragrant pear trees, the espalier training system had better ability to capture light, higher photosynthetic productivity and strongest adaptability to light environment, and open center training system takes the second place. On the contrary, delayed-open central leader training system has the weakest adaptability to light environment, but it can adapt to a higher CO2 concentration. In summary, for the training of Korla fragrant pear trees, espalier training system, which has the highest theoretical yield, is the best among the three training systems, and delayed-open central leader training system is the worst.
基金supported by a Grant No. (14IFIP-B085984-03) from Smart Civil Infrastructure Research Program funded by the Korea Government Ministry of Land,Infrastructure and Transport (MOLIT) and The Korea Agency for Infrastructure Technology Advancement(KAIA)by Korea Ministry of Environment (MOE) as ‘the Chemical Accident Prevention Technology Development Project’ (No. 2015001950003)
文摘This study proposes a method of interactive plant simulation modeling which delivers the online simulated results to the field operators and induces them to take proper actions in the case of pre-identified accident scenarios in a chemical plant. The developed model integrates the real-time process dynamic simulation with 3DCFD accident simulation in a designed interface using object linking and embedding technology so that it can convey to trainees the online information of the accident which is not available in existing operator training systems.The model encompasses the whole process of data transfer till the end of the training at which a trainee operates an emergency shutdown system in a programmed model. In this work, an overall scenario is simulated which is from an abnormal increase in the main valve discharge（second）pressure due to valve malfunction to accidental gas release through the crack of a pressure recorder, and the magnitude of the accident with respect to the lead time of each trainee＇s emergency response is analyzed. The model can improve the effectiveness of the operator training system through interactively linking the trainee actions with the simulation model resulting in different accident scenarios with respect to each trainee＇s competence when facing an accident.
基金This research is supported by the National Natural Science Foundation of China （No. 51105237 and No. 51105103）.
文摘Compared to traditional welding methods, the underwater wet welding is special with many different characteristics due to the unique aqueous environment. It is conducted completely under water by divers and unique welding technology is required in the special operation environment. The operating levels of the divers are the key factor to acquire high quality welded joints. In this paper, an underwater wet welding experimental and divers training system is developed to serve divers training and conducting welding experiments. The system consists of life support system, signals real-time monitoring system and communicating system, etc. An underwater butt welding experiment based on welding electrodes is conducted, and the system works well. It proves that the system can guarantee divers welding safely and successfully and high quality weld seam is expected to be acquired.
文摘Objective:A computer-based STS(simulative training system) in providing pre-hospital trauma care at a disaster site was applied to teaching nursing students in the Second Military Medical University,China.This article reports on the teaching effectiveness of this system.Methods:Among 92 participants,46 were in the study group and 46 were in the 'control' group. Each student completed a multiple-choice quiz after completing 18 hours(six three-hour sessions) of the study module,and a score was recorded.The simulative training module was completed only by the study group;the 'control' group was assigned in-class discussions for the same amount of time covering the same content as the study group.The final course scores,which included both comprehensive and group task-based tests were compared between these two groups.The study used a descriptive and comparative approach for quantitative data analysis.Tests of independency between the multiple choice scores and the simulation scores were also performed.Finally,anonymous surveys were conducted.Results:The study group performed better than the 'control' group with a significantly higher average score for the group scenario task-based test score,and consequently the study group's final course score was significantly higher than the 'control' group.As per chi-square tests,no significant associations were found between the multiple choice scores and the simulated training scores.The final surveys showed students overwhelmingly agreed that STS training improved their knowledge and skills,their ability to recognize a potential critical event, and their initial response for trauma care at pre-hospital settings.The survey responses of the study group were noteworthy as they indicated that students recognized the importance of simulative training,appreciated the realism of the simulation,and were able to fight/adjust to the stressful feelings in order to focus on the task.Conclusion:Computer-based STS may be an effective teaching model to help students improve their capability in providing pre-hospital trauma care,and in their effectiveness in disaster response.
基金Sponsored by Key Teaching Reform Program of Guangdong Provincial Department of EducationTeaching Reform Program of Guangdong Provincial Department of Education(XJG201208,GDOU2014040637)
文摘On the basis of successful domestic and foreign cases in landscape architecture teaching as well as characteristics of landscape architecture major in Guangdong Ocean University,this paper is to enhance the teaching characteristics of coast-landscape design,reconstruct the training system of landscape designers,optimize and improve teaching quality in practices.
基金Supported by Innovation Engineering Project of Hebei Academy of Agriculture and Forestry Sciences(2022KJCXZX-CGS-7)Key R&D Program of Hebei Province(21326308D-1-2)China Agriculture Research System of MOF and MARA(CARS-28-27)。
文摘In view of the deficiencies of training technologies during constructing pear orchards by modern simplified dense-planting cultivation with ordinary pear seedlings widely used in production,a simple and easy-to-operate training method was proposed,mainly including constructing fence nets,determining low main trunks,leaving buds at the northwest position,multiple bud removal,winding and notching,simplified branch supporting,and simplified branch pulling.
基金Supported by Educational Science Research Project of Shanghai City(C16064)
文摘This paper focuses on the coupling between talent training system of marine cultural industry and collaborative innovation of govern-ments, enterprises, colleges, scientific institutions and users. Firstly, the significance of talent training in marine cultural industry for the construction of China as a maritime power was analyzed. Secondly, the current situation of talent training in China＇s marine cultural industry and the existing problems were analyzed. Finally, how to integrate the collaborative innovation of governments, enterprises, colleges, scientific institutions and us-ers into the talent training system of marine cultural industry was explored to help talent training to break through the bottleneck and promote the vig-orous development of marine cultural industry.
基金Supported by the Chongqing Social Science Planning and Cultivation Project(2020PY68)Humanities and Social Sciences Project of Chongqing Municipal Education Commission(20SKGH200).
文摘It is very important to establish a farmer education and training system for the revitalization of rural talents.This paper analyzed the necessity and new requirements for the construction of a farmer education and training system in the new era.It pointed out the specific path for construction of farmer education and training system from accurately grasping the development direction of farmer education and training,accelerating the construction of a new pattern of farmer education and training,comprehensively promoting the high-quality development of farmer education and training,and actively creating a good atmosphere for farmer education and training,so as to promote the revitalization of rural talents.
文摘At present,there are a series of problems in the enterprise training system,such as the lack of systematic management,imperfect management and control measures,the lack of scienti＇c evaluation system,and so on.With the rapid development of information technology,the members of the enterprise should not only strengthen their own learning,but also promote each other.The training system of the enterprise should effectively take these needs as the preferred factors to establish and optimize the system.Based on this urgent need,this paper will put forward some thoughts on the optimization of enterprise training system from the perspective of project management.
文摘The safety production is critical to stable development of Chinese electric power industry. With the development of electric power enterprises, the requirements of its employees are also becoming higher and higher. In this paper, an optical motion capture system based on the virtual reality technology is proposed to meet the requirements of the power enterprise for the qualified business ability. Electric power equipment, power equipment model entitative operating environment and the human model are established by electric power simulation unit, ZigBee technology and OpenGL graphics library. The problem of missing feature points is solved by applying the human model driven algorithm and the Kalman filtering algorithm. The experimental results show that it is more accurate to use Kalman filtering algorithm to extract the feature point in tracking process of actual motion capture and real-time animation display. The average absolute error of 3D coordinates is 1.61 mm and the average relative error is 2.23%. The system can improve trainees’ sense of experience and immersion.
文摘This paper is devoted to development and study of models for operator training systems of heating power station processes management. It proposed a mathematical model describing the management processes of heating power units of the technological complex considering the relationship of technological variables in deviations effective in real time. A software complex is developed for the system of training of operators controlling processes in heating station units. Obtained results may be used in the course of development of computer training systems for operators of heating power stations with cross-linkage.
基金funded by the ‘‘twelfth five” National Key Technology Research and Development Program of the Ministry of Science and Technology of China (Grant No. 2015BAK10B00)
文摘Virtual reality(VR) training technology in the mining industry is a new field of research and utilization.The successful application of VR training system is critical to mine safety and production. Through the statistics of the current research and applications of VR training systems in mining industry, all the input/output devices are classified. Based on the classifications of the input/output devices that are used in the VR system, the current VR training systems for the mining industry could be divided into three types: screen-based general type, projector-based customized type, and head-mounted display(HMD)-based intuitive type. By employing a VR headset, a smartphone and a leap motion device, an HMDbased intuitive type VR training system prototype for drilling in underground mines has been developed.Ten trainees tried both the HMD-based intuitive system and the screen-based general control system to compare the experiences and training effects. The results show that the HMD-based system can give a much better user experience and is easy to use. Three of the five components of a VR training system,namely, the user, the tasks, and software and database should be given more attention in future research.With more available technologies of input and output devices, VR engines, and system software, the VR training system will eventually yield much better training results, and will play a more important role in as a training tool for mine safety.
文摘With deep development of state grid’s system of "Three Sets of Five [1]", China is in urgent need of establishing an appropriate type of simulation system to rapidly improve operation efficiency and the level of maintainers, which aim at the integrated operation of substation operation and maintenance service. This article gives an introduction of a simulation training system which is designed for operation-skills training in electrical systems. By the composition of the multiple subjects and skills training for operations staff, this system can provide human guarantee and intellectual support for the "Big-Centralized Overhal".
基金Supported by the China-Slovenia Intergovernmental Science and Technology Cooperation and Exchange Project(2017-21-12-16)China-Serbia Intergovernmental Science and Technology Cooperation and Exchange Project(266-3-1).
文摘Based on domain specified language mechanism(DSLM),the architecture of the robotic training system for the rehabilitation of children with cerebral palsy(CP)is designed.Application of human-computer interaction(HCI)motion recognition technology is combined with Kinect to improve the effect of cerebral palsy rehabilitation training.In this system,Kinect's bone recognition method is used to judge the patient's training movements,and the collected bone movement information is judged.The human-computer interaction function is based on the Microsoft foundation classes function of Visual Studio based on DSLM development,which can realize real-time interactive training and evaluation of people and actions,and record the training information of patients.The system combines the designed small game to train the upper limb movement ability and reaction ability of the cerebral palsy patient,and provides key technology for improving the cerebral palsy rehabilitation training system.
基金the National Science Foundations of China(62062069,62062070,62005235).
文摘Background Compared with traditional thoracotomy,video-assisted thoracoscopic surgery(VATS)has less minor trauma,faster recovery,higher patient compliance,but higher requirements for surgeons.Virtual surgery training simulation systems are important and have been widely used in Europe and America.Augmented reality(AR)in surgical training simulation systems significantly improve the training effect of virtual surgical training,although AR technology is still in its initial stage.Mixed reality has gained increased attention in technology-driven modern medicine but has yet to be used in everyday practice.Methods This study proposed an immersive AR lobectomy within a thoracoscope surgery training system,using visual and haptic modeling to study the potential benefits of this critical technology.The content included immersive AR visual rendering,based on the cluster-based extended position-based dynamics algorithm of soft tissue physical modeling.Furthermore,we designed an AR haptic rendering systems,whose model architecture consisted of multi-touch interaction points,including kinesthetic and pressure-sensitive points.Finally,based on the above theoretical research,we developed an AR interactive VATS surgical training platform.Results Twenty-four volunteers were recruited from the First People's Hospital of Yunnan Province to evaluate the VATS training system.Face,content,and construct validation methods were used to assess the tactile sense,visual sense,scene authenticity,and simulator performance.Conclusions The results of our construction validation demonstrate that the simulator is useful in improving novice and surgical skills that can be retained after a certain period of time.The video-assisted thoracoscopic system based on AR developed in this study is effective and can be used as a training device to assist in the development of thoracoscopic skills for novices.
文摘In this study, Virtual Reality (VR)-based plastic injection molding training system (VPIMTS), which can be modeled as an integrated system with a task planning module, an intelligent instruction module, a simulation module, and virtual envi-ronment (VE) module, was developed. Presented in this paper are an architecture of VPIMTS, a practical knowledge modelling approach for modelling the training scenarios of the system by using Petri nets formalism and key techniques (FEM, injection molding procedure modelling) which have been developed independently. The utilization of the Petri net model realized the environment where the trainee can behave freely, and also made it possible to equip the system with the function of showing the next action of the trainee whenever he wants. The overall system is a powerful approach for highly improving the trainee’s comprehension and injection molding study-efficiency by building digital, intelligent, knowledgeable, and visual aids.
基金Supported by Educational Science Research Project of Shanghai City(C16064)Key Teaching Reform Project for Undergraduate Education of Colleges and Universities in Shanghai City “Research and Practice of Training Modes of Shipping Professionals Based on Collaboration among Different Domains from a Perspective of Innovation and Entrepreneurship Education”
文摘Construction of talent training system in marine cultural industry in developed countries was introduced firstly,and then the enlightenment of talent training in marine cultural industry in developed countries to China was analyzed,such as changing the development consciousness of marine cultural industry,strengthening the construction of professional teaching staff in marine cultural industry,and innovating the talent training modes of marine cultural industry.
基金supported by the Fundamental Research Funds for the Central Universities under Grant 2020RC011.
文摘"Semester Training"has been adopted as an important part of the personnel training in software engineering majors since it was first put forward.The ultimate goal of semester training is to improve the professional quality of students in an all-round way,then eventually achieve the goal of satisfactory employment for both students and enterprises.However,in order to achieve the above purpose,the design of traditional training project still has the following problems:the topic selection of traditional training is designed by teachers in college,which lacks the training of engineering ability aiming at practical problems;the content and technology of traditional project training are out of date,ignoring the urgent demand of software industry development for advanced technology application;the traditional project training inspects the mastery of knowledge in each semester Degree,ignores the incremental of a progressive training system.In view of the above problems,this study proposes an Application-Oriented Software Engineering Semester Training System.Practice has proved that the construction of the training system can effectively improve the quality of teaching,so as to further improve the comprehensive quality of students.
文摘Nowadays, Health Care Training-based System (HCTS) is a vital component in the education and training of health care in 3D Virtual Environment (VE). The practice of HCTS continues to grow at rapid pace throughout all of the healthcare disciplines, however research in this field is still in its early stage. Increasingly, decision makers and developers look forward to offer more sophisticated, much larger, and more complex HCTS to serve the desired outcome and improve the quality and safety of patient care. Due to the rapidly increasing usage of personal mobile devices and the need of executing HCTS applications in environments that have no previous network infrastructure available, Mobile Health Care Training-based System (MHCTS) is an expected future trend. In such systems, medical staff will share and collaborate in a 3D virtual environment through their mobile devices in an ad-hoc network (MANET) in order to accomplish specific missions’ typically surgical emergency room. Users are organized into various groups (Radiologists, Maternity departments, and General surgery etc...), and need to be managed by a multicast scheme to save network bandwidth and offer immersive sense. MHCTS is sensitive to networking issues, since interactive 3D graphics requires additional load due to the use of mobile devices. Therefore, we need to emphasize on the importance and the improvement of multicast techniques for the effectiveness of MHCTS and the management of collaborative group interaction. Research so far has devoted little attention to the network communication protocols design of such systems which is crucial to preserve the sense of immersion for participating users. In this paper, we investigate the effect of multicast routing protocol in advancing the field of Health care Training-based System to the benefit of patient’s safety, and health care professional. Also, we address the issue of selecting a multicast protocol to provide the best performance for a particular e-health system at any time. Previous work has demonstrated that multicast operates at least as efficiently as traditional MAODV. A comprehensive analysis about various ad-hoc multicast routing protocols is proposed. The selection key factors for the right protocol for MHCTS applications were safety and robustness. To the best of our knowledge, this work will be the first initiative involving systematic literature reviews to identify a research gate for the use of multicast protocol in health care simulation learning community.
