A dominant source of vibration in geared-rotor systems is the gear mesh fault parameters.They include the asymmetric transmission error(TE),phases of TE,the gear mesh stiffness,the gear mesh damping,and the gear runou...A dominant source of vibration in geared-rotor systems is the gear mesh fault parameters.They include the asymmetric transmission error(TE),phases of TE,the gear mesh stiffness,the gear mesh damping,and the gear runouts.The present work deals with the experimental identification of the aforementioned parameters.A mathematical model of a geared-rotor system has been developed using Lagrangian dynamics.Equations of motion are transformed into the frequency domain using the full-spectrum response analysis.These transformed equations are used to develop an identification algorithm(IA)based on least-squares fit to estimate the TE and gear mesh dynamic parameters.The system IA is initially verified using numerical simulations.The robustness of the algorithm is checked by introducing white Gaussian noise in the simulated responses.A geared-rotor experimental rig was developed and used to measure responses at gear locations in two orthogonal directions.Measured responses are transformed in the frequency domain using the full-spectrum analysis and used in the present novel IA to identify the gear parameters.The identified parameters are validated by comparing the numerically generated full-spectrum response using experimentally estimated parameters and that from the experimental rig.展开更多
To improve the performance of MIMO-OFDM video transmission systems on the limitation of wireless bandwidth and transmitting power,we propose an adaptive joint resource allocation algorithm with unequal error protectio...To improve the performance of MIMO-OFDM video transmission systems on the limitation of wireless bandwidth and transmitting power,we propose an adaptive joint resource allocation algorithm with unequal error protection(UEP) based on joint source-channel coding(JSCC) according to H.264 video compression standard and RCPT channel coding.According to different thresholds of the average SNR of subchannels,the algorithm dynamically allocates the source coding parameters of original video data and the channel coding parameters of RCPT,which realizes UEP for the compressed video data of different importance.Through the bit and power allocation based on MQAM modulation and the subspace allocation based on beamforming technology for different subcarriers,an adaptive joint resource allocation making full use of space-frequency domain resources have been realized.The simulation results indicate that the algorithm improves the adaptability of video transmission systems in different wireless environments and the quality of video retrieval.展开更多
Monte Carlo method was adopted to calculate the meshing error considering the manufacture error and assembly error of the meshing point along the time-varying contact line for helical gear pair. The flexural-torsion-a...Monte Carlo method was adopted to calculate the meshing error considering the manufacture error and assembly error of the meshing point along the time-varying contact line for helical gear pair. The flexural-torsion-axis dynamic model coupled was established under the tooth friction force and solved by the perturbation method to compute real dynamic tooth load. The change laws of the friction force and friction torque were obtained in a meshing period. The transmission error formulation was analyzed to introduce meshing excitations. The maximum dynamic transmission error, the maximum meshing force and the maximum dynamic factor were calculated under different speeds, external loads and damping factors. The conclusions can provide theoretical basis for the gear design especially in tooth profile correction.展开更多
The purpose of this research work is to investigate the numerical solutions of the fractional dengue transmission model(FDTM)in the presence of Wolbachia using the stochastic-based Levenberg-Marquardt neural network(L...The purpose of this research work is to investigate the numerical solutions of the fractional dengue transmission model(FDTM)in the presence of Wolbachia using the stochastic-based Levenberg-Marquardt neural network(LM-NN)technique.The fractional dengue transmission model(FDTM)consists of 12 compartments.The human population is divided into four compartments;susceptible humans(S_(h)),exposed humans(E_(h)),infectious humans(I_(h)),and recovered humans(R_(h)).Wolbachia-infected and Wolbachia-uninfected mosquito population is also divided into four compartments:aquatic(eggs,larvae,pupae),susceptible,exposed,and infectious.We investigated three different cases of vertical transmission probability(η),namely when Wolbachia-free mosquitoes persist only(η=0.6),when both types of mosquitoes persist(η=0.8),and when Wolbachia-carrying mosquitoes persist only(η=1).The objective of this study is to investigate the effectiveness of Wolbachia in reducing dengue and presenting the numerical results by using the stochastic structure LM-NN approach with 10 hidden layers of neurons for three different cases of the fractional order derivatives(α=0.4,0.6,0.8).LM-NN approach includes a training,validation,and testing procedure to minimize the mean square error(MSE)values using the reference dataset(obtained by solving the model using the Adams-Bashforth-Moulton method(ABM).The distribution of data is 80% data for training,10% for validation,and,10% for testing purpose)results.A comprehensive investigation is accessible to observe the competence,precision,capacity,and efficiency of the suggested LM-NN approach by executing the MSE,state transitions findings,and regression analysis.The effectiveness of the LM-NN approach for solving the FDTM is demonstrated by the overlap of the findings with trustworthy measures,which achieves a precision of up to 10^(-4).展开更多
Based on the property that high degree variable nodes within an irregular LowDensity Parity-Check (LDPC) code have more powerful error-correcting capability than that of low degree variable nodes, a group of irregular...Based on the property that high degree variable nodes within an irregular LowDensity Parity-Check (LDPC) code have more powerful error-correcting capability than that of low degree variable nodes, a group of irregular LDPC codes with Unequal Error Protection (UEP)property is designed in this letter. Simulation results show that the transmission quality of the image may be effectively improved with this class of irregular LDPC code.展开更多
The construction kinematics and no reverse error property of heterotype single cycloid steel ball transmission are studied and its engagement pairs structure as well as foree analysis are al- so presented. It pr...The construction kinematics and no reverse error property of heterotype single cycloid steel ball transmission are studied and its engagement pairs structure as well as foree analysis are al- so presented. It provides a kind of high property driver of large transmission ratio and compact con- struction and has theoretical and practical significance for application of the steel ball transmission.展开更多
This paper proposes a new approach to design pinion machine tool-settings for spiral bevel gears by controlling contact path and transmission errors. It is based on the satisfaction of contact condition of three given...This paper proposes a new approach to design pinion machine tool-settings for spiral bevel gears by controlling contact path and transmission errors. It is based on the satisfaction of contact condition of three given control points on the tooth surface. The three meshing points are controlled to be on a predesigned straight contact path that meets the pre-designed parabolic function of transmission errors. Designed separately, the magnitude of transmission errors and the orientation of the contact path are subjected to precise control. In addition, in order to meet the manufacturing requirements, we suggest to modify the values of blank offset, one of the pinion machine tool-settings, and redesign pinion ma- chine tool-settings to ensure that the magnitude and the geometry of transmission errors should not be influenced apart from minor effects on the predesigned straight contact path. The proposed approach together with its ideas has been proven by a numerical example and the manufacturing practice of a pair of spiral bevel gears.展开更多
Time?varying mesh stiffness(TVMS) and gear errors include short?term and long?term components are the two main internal dynamic excitations for gear transmission. The coupling relationship between the two factors is u...Time?varying mesh stiffness(TVMS) and gear errors include short?term and long?term components are the two main internal dynamic excitations for gear transmission. The coupling relationship between the two factors is usually neglected in the traditional quasi-static and dynamic behaviors analysis of gear system. This paper investigates the influence of short?term and long?term components of manufacturing errors on quasi?static and dynamic behaviors of helical gear system considering the coupling relationship between TVMS and gear errors. The TVMS, loaded static transmission error(LSTE) and loaded composite mesh error(LCMS) are determined using an improved loaded tooth contact analysis(LTCA) model. Considering the structure of shaft, as well as the direction of power flow and bearing location, a precise generalized finite element dynamic model of helical gear system is developed, and the dynamic responses of the system are obtained by numerical integration method. The results suggest that lighter loading conditions result in smaller mesh stiffness and stronger vibration, and the corresponding resonance speeds of the system become lower. Long?term components of manufacturing errors lead to the appearance of sideband frequency components in frequency spectrum of dynamic responses. The sideband frequency components are predominant under light loading conditions. With the increase of output torque, the mesh frequency and its harmonics components tend to be enhanced relative to sideband frequency components. This study can provide effective reference for low noise design of gear transmission.展开更多
Chain drive system is widely used in the conditions of high-speed, overload, variable speed and load, Many studies are focused on the meshing theory and wear characteristics of chain drive system, but system design, a...Chain drive system is widely used in the conditions of high-speed, overload, variable speed and load, Many studies are focused on the meshing theory and wear characteristics of chain drive system, but system design, analysis, and noise characteristics of the chain drive system are weak. System design and noise characteristic are studied for a new type Gemini chain of dual-clutch automatic transmission. Based on the meshing theory of silent chain, the design parameters of the Gemini chain system are calculated and the mathematical models and dynamic analysis models of the Gemini chain system are established. Dynamic characteristics of the Gemini chain system is simulated and the contact force of plate and pin, plate and sprockets, the chain tension forces, the transmission error and the stress of plates and pins are analyzed. According to the simulation results of the Gemini chain system, the noise experiment about system is carried out. The noise values are tested at different speed and load and spectral characteristics are analyzed. The results of simulation and experimental show that the contact forces of plate and pin, plate and sprockets are smaller than the allowable stress values, the chain tension force is less than ultimate tension and transmission error is limited in 1.2%. The noise values can meet the requirements of industrial design, and it is proved that the design and analysis method of the Gemini chain system is scientific and feasible. The design and test system is built from analysis to test of Gemini chain system. This research presented will provide a corresponding theoretical guidance for the design and dynamic characteristics and noise characteristics of chain drive system.展开更多
The effect of static transmission error on nonlinear dynamic response of the spiral bevel gear system combining with time-varying stiffness and backlash was investigated.Firstly,two different control equations of the ...The effect of static transmission error on nonlinear dynamic response of the spiral bevel gear system combining with time-varying stiffness and backlash was investigated.Firstly,two different control equations of the spiral bevel gear model were adopted,where the static transmission error was expressed in two patterns as predesigned parabolic function and sine function of transmission errors.The dynamic response,bifurcation map,time domain response,phase curve and Poincare map were obtained by applying the explicit Runge-Kutta integration routine with variable-step.A comparative study was carried out and some profound phenomena were detected.The results show that there are many different kinds of tooth rattling phenomena at low speed.With the increase of speed,the system enters into stable motion without any rattling in the region(0.72,1.64),which indicates that the system with predesigned parabolic function of transmission error has preferable capability at high speed.展开更多
This paper proposes a novel method to predict the spur gear pair’s static transmission error based on the accuracy grade,in which manufacturing errors(MEs),assembly errors(AEs),tooth deflections(TDs)and profile modif...This paper proposes a novel method to predict the spur gear pair’s static transmission error based on the accuracy grade,in which manufacturing errors(MEs),assembly errors(AEs),tooth deflections(TDs)and profile modifications(PMs)are considered.For the prediction,a discrete gear model for generating the error tooth profile based on the ISO accuracy grade is presented.Then,the gear model and a tooth deflection model for calculating the tooth compliance on gear meshing are coupled with the transmission error model to make the prediction by checking the interference status between gear and pinion.The prediction method is validated by comparison with the experimental results from the literature,and a set of cases are simulated to study the effects of MEs,AEs,TDs and PMs on the static transmission error.In addition,the time-varying backlash caused by both MEs and AEs,and the contact ratio under load conditions are also investigated.The results show that the novel method can effectively predict the range of the static transmission error under different accuracy grades.The prediction results can provide references for the selection of gear design parameters and the optimization of transmission performance in the design stage of gear systems.展开更多
Several well-publicized cases of improper cleaning,disinfection or sterilization of contaminated reusable medical equipment that posed an increased risk of patientto-patient disease transmission were reported within t...Several well-publicized cases of improper cleaning,disinfection or sterilization of contaminated reusable medical equipment that posed an increased risk of patientto-patient disease transmission were reported within the past few years,resulting in the notification of approximately 20 000 patients.These medical errors,the specific infection-control standards they breached,and assessments of the risk of infection associated with each are discussed.Other topics discussed include the Food and Drug Administration’s(FDA)regulation of medical devices and infection-control products;the use of adulterated,misbranded,and investigational devices;consent decrees and associated Certificates of Medical Necessity;and informed patient consent.Focus is placed on liquid chemical sterilization,its history,and the FDA’s recent censure and discontinuation of a medical device labeled with this claim,namely,the STERIS System 1 processor.Recommendations are provided for healthcare facilities,regulatory agencies,manufacturers of reusable medical devices,and professional healthcare organizations and administrations to improve public health and prevent healthcareassociated infections.展开更多
The accuracy of RV reducer transmission is mainly affected by the transmission accuracy. Taking the high precision RV-80E reducer as the research object, aiming at its structural characteristics, the rigid-flexible co...The accuracy of RV reducer transmission is mainly affected by the transmission accuracy. Taking the high precision RV-80E reducer as the research object, aiming at its structural characteristics, the rigid-flexible coupling model of RV reducer is established by using ADAMS multi-body dynamics simulation software, and the correctness of the model is verified. At the same time, the rigid-flexible coupling model is used to design several groups of simulation prototypes with different errors, and the influence of different error factors on the transmission accuracy of the whole machine is analyzed by simulation. Finally, through different error factors, it is concluded that the error combination of positive equidistance+negative offset or negative equidistance+positive offset can effectively reduce the influence of transmission error on the transmission accuracy of the whole machine.展开更多
In order to improve the data transmission reliability of mobile ad hoc network, a routing scheme called integrated forward error correction multipath routing protocol was proposed, which integrates the techniques of p...In order to improve the data transmission reliability of mobile ad hoc network, a routing scheme called integrated forward error correction multipath routing protocol was proposed, which integrates the techniques of packet fragmenting and forward error correction encoding into multipath routing. The scheme works as follows: adding a certain redundancy into the original packets; fragmenting the resulting packets into exclusive blocks of the same size; encoding with the forward error correction technique, and then sending them to the destination node. When the receiving end receives a certain amount of information blocks, the original information will be recovered even with partial loss. The performance of the scheme was evaluated using OPNET modeler. The experimental results show that with the method the average transmission delay is decreased by 20% and the transmission reliability is increased by 30%.展开更多
The improved three novel schemes of the super forward error correction （super-FEC） concatenated codes are proposed after the development trend of long-haul optical transmission systems and the defects of the existin...The improved three novel schemes of the super forward error correction （super-FEC） concatenated codes are proposed after the development trend of long-haul optical transmission systems and the defects of the existing FEC codes have been analyzed. The performance simulation of the Reed-Solomon（RS）＋ Bose-Chaudhuri-Hocguenghem（BCH） inner-outer serial concatenated code is implemented and the conceptions of encoding/decoding the parallel-concatenated code are presented. Furthermore, the simulation results for the RS（255,239） ＋RS（255,239） code and the RS（255,239） ＋RS（255,223） code show that the two consecutive concatenated codes are a superior coding scheme with such advantages as the better error correction, moderate redundancy and easy realization compared to the classic RS（255,239） code and other codes, and their signal to noise ratio gains are respectively 2-3 dB more than that of the RS（255,239）code at the bit error rate of 1 × 10^-13. Finally, the frame structure of the novel consecutive concatenated code is arranged to lay a firm foundation in designing its hardware.展开更多
In this paper, we present a spatio-temporal post-processing error concealment (EC) algorithm designed initially for a H.264 video-streaming scheme over packet-lossy networks. It aims at optimizing the subjective quali...In this paper, we present a spatio-temporal post-processing error concealment (EC) algorithm designed initially for a H.264 video-streaming scheme over packet-lossy networks. It aims at optimizing the subjective quality of the restored video under the constraints of low delay and computational complexity, which are critical to real-time applications and portable devices having limited resources. Specifically, it takes into consideration the physical property of motion field in order to achieve more meaningful perceptual video quality, in addition to the improved objective PSNR. Further, a simple bilinear spatial interpolation approach is combined with the improved boundary-match (B-M) based temporal EC approach according to texture and motion activity analysis. Finally, we propose a low complexity temporal EC method based on motion vector interpolation as a replacement of the B-M based approach in the scheme under low-computation requirement, or as a complement to further improve the scheme's performance in applications having enough computation resources. Extensive experiments demonstrated that the proposal features not only better reconstruction, objectively and subjectively, than JM benchmark, but also robustness to different video sequences.展开更多
MIMO technique can provide higher information throughput and transmission reliability for the PLC system.However,the MIMO-PLC system based on three-conductor cable has a high correlation among its sub-channels.Spatial...MIMO technique can provide higher information throughput and transmission reliability for the PLC system.However,the MIMO-PLC system based on three-conductor cable has a high correlation among its sub-channels.Spatial multiplexing technology will be affected by the spatial correlation between MIMO-PLC sub-channels.To reduce the system bit error rate caused by MIMO-PLC correlation among sub-channels,this paper proposed a phase rotation precoding scheme for the 2×2 closed-loop MIMO-PLC system.According to the channel transfer function of high correlation MIMO-PLC system,the phase rotation precoding matrix F is calculated,and the transmission signal matrix S is modulated with the F,the code distance at the receiving point with smallest code distance is increased by phase rotation.Simulation results show that the scheme can effectively reduce the bit error rate of the 2×2 MIMO-PLC system based on ML detection,and significantly improve the system performance.展开更多
The symbol-error-rate（SER） and power allocation for hybrid cooperative（HC） transmission system are investigated.Closed-form SER expression is derived by using the moment generating function（MGF）-based approach.H...The symbol-error-rate（SER） and power allocation for hybrid cooperative（HC） transmission system are investigated.Closed-form SER expression is derived by using the moment generating function（MGF）-based approach.However,the resultant SER contains an MGF of the harmonic mean of two independent random variables（RVs）,which is not tractable in SER analysis.We present a simple MGF expression of the harmonic mean of two independent RVs which avoids the hypergeometric functions used commonly in previous studies.Using the simple MGF,closed-form SER for HC system with M-ary phase shift keying（M-PSK） signals is provided.Further,an approximation as well as an upper bound of the SER is presented.It is shown that the SER approximation is asymptotically tight.Based on the tight SER approximation,the power allocation of the HC system is investigated.It is shown that the optimal power allocation does not depend on the fading parameters of the source-destination（SD） channel and it only depends on the source-relay（SR） and relay-destination（RD） channels.Moreover,the performance gain of the power allocation depends on the ratio of the channel quality between RD and SR.With the increase of this ratio,more performance gain can be acquired.展开更多
In the paper,a new method for the measurement of the dynamic transmission crror of preci-sion hobbing machines using only one sensor is proposed.The dynamic transmission error i ob-tained by demodulating the phase-mod...In the paper,a new method for the measurement of the dynamic transmission crror of preci-sion hobbing machines using only one sensor is proposed.The dynamic transmission error i ob-tained by demodulating the phase-modulated signal according to the Hilbert transform priple.The results of dynamic testing show that the new method is effective.展开更多
文摘A dominant source of vibration in geared-rotor systems is the gear mesh fault parameters.They include the asymmetric transmission error(TE),phases of TE,the gear mesh stiffness,the gear mesh damping,and the gear runouts.The present work deals with the experimental identification of the aforementioned parameters.A mathematical model of a geared-rotor system has been developed using Lagrangian dynamics.Equations of motion are transformed into the frequency domain using the full-spectrum response analysis.These transformed equations are used to develop an identification algorithm(IA)based on least-squares fit to estimate the TE and gear mesh dynamic parameters.The system IA is initially verified using numerical simulations.The robustness of the algorithm is checked by introducing white Gaussian noise in the simulated responses.A geared-rotor experimental rig was developed and used to measure responses at gear locations in two orthogonal directions.Measured responses are transformed in the frequency domain using the full-spectrum analysis and used in the present novel IA to identify the gear parameters.The identified parameters are validated by comparing the numerically generated full-spectrum response using experimentally estimated parameters and that from the experimental rig.
基金Sponsored by the Fundamental Research Funds for the Central Universities (Grant No. HIT. NSRIF. 201149)the National Natural Science Foundation of China (Grant No. 61071104)
文摘To improve the performance of MIMO-OFDM video transmission systems on the limitation of wireless bandwidth and transmitting power,we propose an adaptive joint resource allocation algorithm with unequal error protection(UEP) based on joint source-channel coding(JSCC) according to H.264 video compression standard and RCPT channel coding.According to different thresholds of the average SNR of subchannels,the algorithm dynamically allocates the source coding parameters of original video data and the channel coding parameters of RCPT,which realizes UEP for the compressed video data of different importance.Through the bit and power allocation based on MQAM modulation and the subspace allocation based on beamforming technology for different subcarriers,an adaptive joint resource allocation making full use of space-frequency domain resources have been realized.The simulation results indicate that the algorithm improves the adaptability of video transmission systems in different wireless environments and the quality of video retrieval.
基金Supported by National Basic Research Program of China("973"Program,No.2013CB632305)
文摘Monte Carlo method was adopted to calculate the meshing error considering the manufacture error and assembly error of the meshing point along the time-varying contact line for helical gear pair. The flexural-torsion-axis dynamic model coupled was established under the tooth friction force and solved by the perturbation method to compute real dynamic tooth load. The change laws of the friction force and friction torque were obtained in a meshing period. The transmission error formulation was analyzed to introduce meshing excitations. The maximum dynamic transmission error, the maximum meshing force and the maximum dynamic factor were calculated under different speeds, external loads and damping factors. The conclusions can provide theoretical basis for the gear design especially in tooth profile correction.
文摘The purpose of this research work is to investigate the numerical solutions of the fractional dengue transmission model(FDTM)in the presence of Wolbachia using the stochastic-based Levenberg-Marquardt neural network(LM-NN)technique.The fractional dengue transmission model(FDTM)consists of 12 compartments.The human population is divided into four compartments;susceptible humans(S_(h)),exposed humans(E_(h)),infectious humans(I_(h)),and recovered humans(R_(h)).Wolbachia-infected and Wolbachia-uninfected mosquito population is also divided into four compartments:aquatic(eggs,larvae,pupae),susceptible,exposed,and infectious.We investigated three different cases of vertical transmission probability(η),namely when Wolbachia-free mosquitoes persist only(η=0.6),when both types of mosquitoes persist(η=0.8),and when Wolbachia-carrying mosquitoes persist only(η=1).The objective of this study is to investigate the effectiveness of Wolbachia in reducing dengue and presenting the numerical results by using the stochastic structure LM-NN approach with 10 hidden layers of neurons for three different cases of the fractional order derivatives(α=0.4,0.6,0.8).LM-NN approach includes a training,validation,and testing procedure to minimize the mean square error(MSE)values using the reference dataset(obtained by solving the model using the Adams-Bashforth-Moulton method(ABM).The distribution of data is 80% data for training,10% for validation,and,10% for testing purpose)results.A comprehensive investigation is accessible to observe the competence,precision,capacity,and efficiency of the suggested LM-NN approach by executing the MSE,state transitions findings,and regression analysis.The effectiveness of the LM-NN approach for solving the FDTM is demonstrated by the overlap of the findings with trustworthy measures,which achieves a precision of up to 10^(-4).
文摘Based on the property that high degree variable nodes within an irregular LowDensity Parity-Check (LDPC) code have more powerful error-correcting capability than that of low degree variable nodes, a group of irregular LDPC codes with Unequal Error Protection (UEP)property is designed in this letter. Simulation results show that the transmission quality of the image may be effectively improved with this class of irregular LDPC code.
文摘The construction kinematics and no reverse error property of heterotype single cycloid steel ball transmission are studied and its engagement pairs structure as well as foree analysis are al- so presented. It provides a kind of high property driver of large transmission ratio and compact con- struction and has theoretical and practical significance for application of the steel ball transmission.
基金National Natural Science Foundation of China (50475148)Aeronautical Science Foundation of China (04C53015)Areonautical Sci-tech Innovation Foundation of China (07B53004)
文摘This paper proposes a new approach to design pinion machine tool-settings for spiral bevel gears by controlling contact path and transmission errors. It is based on the satisfaction of contact condition of three given control points on the tooth surface. The three meshing points are controlled to be on a predesigned straight contact path that meets the pre-designed parabolic function of transmission errors. Designed separately, the magnitude of transmission errors and the orientation of the contact path are subjected to precise control. In addition, in order to meet the manufacturing requirements, we suggest to modify the values of blank offset, one of the pinion machine tool-settings, and redesign pinion ma- chine tool-settings to ensure that the magnitude and the geometry of transmission errors should not be influenced apart from minor effects on the predesigned straight contact path. The proposed approach together with its ideas has been proven by a numerical example and the manufacturing practice of a pair of spiral bevel gears.
基金Supported by Key Project of National Natural Science Foundation of China(Grant No.51535009)111 Project(Grant No.B13044)
文摘Time?varying mesh stiffness(TVMS) and gear errors include short?term and long?term components are the two main internal dynamic excitations for gear transmission. The coupling relationship between the two factors is usually neglected in the traditional quasi-static and dynamic behaviors analysis of gear system. This paper investigates the influence of short?term and long?term components of manufacturing errors on quasi?static and dynamic behaviors of helical gear system considering the coupling relationship between TVMS and gear errors. The TVMS, loaded static transmission error(LSTE) and loaded composite mesh error(LCMS) are determined using an improved loaded tooth contact analysis(LTCA) model. Considering the structure of shaft, as well as the direction of power flow and bearing location, a precise generalized finite element dynamic model of helical gear system is developed, and the dynamic responses of the system are obtained by numerical integration method. The results suggest that lighter loading conditions result in smaller mesh stiffness and stronger vibration, and the corresponding resonance speeds of the system become lower. Long?term components of manufacturing errors lead to the appearance of sideband frequency components in frequency spectrum of dynamic responses. The sideband frequency components are predominant under light loading conditions. With the increase of output torque, the mesh frequency and its harmonics components tend to be enhanced relative to sideband frequency components. This study can provide effective reference for low noise design of gear transmission.
基金Supported by National Natural Science Foundation of China(Grant No.51305154)Jilin Provincial Science and Technology Development Program:Automobile Coordinated Action,China(Grant No.20116004)
文摘Chain drive system is widely used in the conditions of high-speed, overload, variable speed and load, Many studies are focused on the meshing theory and wear characteristics of chain drive system, but system design, analysis, and noise characteristics of the chain drive system are weak. System design and noise characteristic are studied for a new type Gemini chain of dual-clutch automatic transmission. Based on the meshing theory of silent chain, the design parameters of the Gemini chain system are calculated and the mathematical models and dynamic analysis models of the Gemini chain system are established. Dynamic characteristics of the Gemini chain system is simulated and the contact force of plate and pin, plate and sprockets, the chain tension forces, the transmission error and the stress of plates and pins are analyzed. According to the simulation results of the Gemini chain system, the noise experiment about system is carried out. The noise values are tested at different speed and load and spectral characteristics are analyzed. The results of simulation and experimental show that the contact forces of plate and pin, plate and sprockets are smaller than the allowable stress values, the chain tension force is less than ultimate tension and transmission error is limited in 1.2%. The noise values can meet the requirements of industrial design, and it is proved that the design and analysis method of the Gemini chain system is scientific and feasible. The design and test system is built from analysis to test of Gemini chain system. This research presented will provide a corresponding theoretical guidance for the design and dynamic characteristics and noise characteristics of chain drive system.
基金Project(2011CB706800) supported by the National Basic Research Program of ChinaProject(51275530) supported by the National Natural Science Foundation of China
文摘The effect of static transmission error on nonlinear dynamic response of the spiral bevel gear system combining with time-varying stiffness and backlash was investigated.Firstly,two different control equations of the spiral bevel gear model were adopted,where the static transmission error was expressed in two patterns as predesigned parabolic function and sine function of transmission errors.The dynamic response,bifurcation map,time domain response,phase curve and Poincare map were obtained by applying the explicit Runge-Kutta integration routine with variable-step.A comparative study was carried out and some profound phenomena were detected.The results show that there are many different kinds of tooth rattling phenomena at low speed.With the increase of speed,the system enters into stable motion without any rattling in the region(0.72,1.64),which indicates that the system with predesigned parabolic function of transmission error has preferable capability at high speed.
基金Project(51675061)supported by the National Natural Science Foundation of China。
文摘This paper proposes a novel method to predict the spur gear pair’s static transmission error based on the accuracy grade,in which manufacturing errors(MEs),assembly errors(AEs),tooth deflections(TDs)and profile modifications(PMs)are considered.For the prediction,a discrete gear model for generating the error tooth profile based on the ISO accuracy grade is presented.Then,the gear model and a tooth deflection model for calculating the tooth compliance on gear meshing are coupled with the transmission error model to make the prediction by checking the interference status between gear and pinion.The prediction method is validated by comparison with the experimental results from the literature,and a set of cases are simulated to study the effects of MEs,AEs,TDs and PMs on the static transmission error.In addition,the time-varying backlash caused by both MEs and AEs,and the contact ratio under load conditions are also investigated.The results show that the novel method can effectively predict the range of the static transmission error under different accuracy grades.The prediction results can provide references for the selection of gear design parameters and the optimization of transmission performance in the design stage of gear systems.
文摘Several well-publicized cases of improper cleaning,disinfection or sterilization of contaminated reusable medical equipment that posed an increased risk of patientto-patient disease transmission were reported within the past few years,resulting in the notification of approximately 20 000 patients.These medical errors,the specific infection-control standards they breached,and assessments of the risk of infection associated with each are discussed.Other topics discussed include the Food and Drug Administration’s(FDA)regulation of medical devices and infection-control products;the use of adulterated,misbranded,and investigational devices;consent decrees and associated Certificates of Medical Necessity;and informed patient consent.Focus is placed on liquid chemical sterilization,its history,and the FDA’s recent censure and discontinuation of a medical device labeled with this claim,namely,the STERIS System 1 processor.Recommendations are provided for healthcare facilities,regulatory agencies,manufacturers of reusable medical devices,and professional healthcare organizations and administrations to improve public health and prevent healthcareassociated infections.
基金supported by Intelligent Welding Technology for Key Parts of Excavator Tianjin Natural Fund(17ZXZNGX00080)Tianjin Natural Science Foundation Project(18JCQNJC75200)Tianjin Municipal Education Commission(JWK1601)
文摘The accuracy of RV reducer transmission is mainly affected by the transmission accuracy. Taking the high precision RV-80E reducer as the research object, aiming at its structural characteristics, the rigid-flexible coupling model of RV reducer is established by using ADAMS multi-body dynamics simulation software, and the correctness of the model is verified. At the same time, the rigid-flexible coupling model is used to design several groups of simulation prototypes with different errors, and the influence of different error factors on the transmission accuracy of the whole machine is analyzed by simulation. Finally, through different error factors, it is concluded that the error combination of positive equidistance+negative offset or negative equidistance+positive offset can effectively reduce the influence of transmission error on the transmission accuracy of the whole machine.
基金Projects(2003CB314802) supported by the State Key Fundamental Research and Development Programof China project(90104001) supported by the National Natural Science Foundation of China
文摘In order to improve the data transmission reliability of mobile ad hoc network, a routing scheme called integrated forward error correction multipath routing protocol was proposed, which integrates the techniques of packet fragmenting and forward error correction encoding into multipath routing. The scheme works as follows: adding a certain redundancy into the original packets; fragmenting the resulting packets into exclusive blocks of the same size; encoding with the forward error correction technique, and then sending them to the destination node. When the receiving end receives a certain amount of information blocks, the original information will be recovered even with partial loss. The performance of the scheme was evaluated using OPNET modeler. The experimental results show that with the method the average transmission delay is decreased by 20% and the transmission reliability is increased by 30%.
文摘The improved three novel schemes of the super forward error correction （super-FEC） concatenated codes are proposed after the development trend of long-haul optical transmission systems and the defects of the existing FEC codes have been analyzed. The performance simulation of the Reed-Solomon（RS）＋ Bose-Chaudhuri-Hocguenghem（BCH） inner-outer serial concatenated code is implemented and the conceptions of encoding/decoding the parallel-concatenated code are presented. Furthermore, the simulation results for the RS（255,239） ＋RS（255,239） code and the RS（255,239） ＋RS（255,223） code show that the two consecutive concatenated codes are a superior coding scheme with such advantages as the better error correction, moderate redundancy and easy realization compared to the classic RS（255,239） code and other codes, and their signal to noise ratio gains are respectively 2-3 dB more than that of the RS（255,239）code at the bit error rate of 1 × 10^-13. Finally, the frame structure of the novel consecutive concatenated code is arranged to lay a firm foundation in designing its hardware.
基金Project supported by the Teaching and Research Award Program for Outstanding Young Professor in High Education Institute, Ministration of Education, China
文摘In this paper, we present a spatio-temporal post-processing error concealment (EC) algorithm designed initially for a H.264 video-streaming scheme over packet-lossy networks. It aims at optimizing the subjective quality of the restored video under the constraints of low delay and computational complexity, which are critical to real-time applications and portable devices having limited resources. Specifically, it takes into consideration the physical property of motion field in order to achieve more meaningful perceptual video quality, in addition to the improved objective PSNR. Further, a simple bilinear spatial interpolation approach is combined with the improved boundary-match (B-M) based temporal EC approach according to texture and motion activity analysis. Finally, we propose a low complexity temporal EC method based on motion vector interpolation as a replacement of the B-M based approach in the scheme under low-computation requirement, or as a complement to further improve the scheme's performance in applications having enough computation resources. Extensive experiments demonstrated that the proposal features not only better reconstruction, objectively and subjectively, than JM benchmark, but also robustness to different video sequences.
基金supported by the National Natural Science Foundation of China (No.62001166)supported by the Natural Science Foundation of Hebei Province of China (E2019502186,F2019201362)supported by the Fundamental Research Funds for the Central Universities (2021MS073)。
文摘MIMO technique can provide higher information throughput and transmission reliability for the PLC system.However,the MIMO-PLC system based on three-conductor cable has a high correlation among its sub-channels.Spatial multiplexing technology will be affected by the spatial correlation between MIMO-PLC sub-channels.To reduce the system bit error rate caused by MIMO-PLC correlation among sub-channels,this paper proposed a phase rotation precoding scheme for the 2×2 closed-loop MIMO-PLC system.According to the channel transfer function of high correlation MIMO-PLC system,the phase rotation precoding matrix F is calculated,and the transmission signal matrix S is modulated with the F,the code distance at the receiving point with smallest code distance is increased by phase rotation.Simulation results show that the scheme can effectively reduce the bit error rate of the 2×2 MIMO-PLC system based on ML detection,and significantly improve the system performance.
基金supported by the National Basic Research Program of China (973 Program) (2010CB731803)the National Science Foundation for Innovative Research Groups of China (60921001)
文摘The symbol-error-rate（SER） and power allocation for hybrid cooperative（HC） transmission system are investigated.Closed-form SER expression is derived by using the moment generating function（MGF）-based approach.However,the resultant SER contains an MGF of the harmonic mean of two independent random variables（RVs）,which is not tractable in SER analysis.We present a simple MGF expression of the harmonic mean of two independent RVs which avoids the hypergeometric functions used commonly in previous studies.Using the simple MGF,closed-form SER for HC system with M-ary phase shift keying（M-PSK） signals is provided.Further,an approximation as well as an upper bound of the SER is presented.It is shown that the SER approximation is asymptotically tight.Based on the tight SER approximation,the power allocation of the HC system is investigated.It is shown that the optimal power allocation does not depend on the fading parameters of the source-destination（SD） channel and it only depends on the source-relay（SR） and relay-destination（RD） channels.Moreover,the performance gain of the power allocation depends on the ratio of the channel quality between RD and SR.With the increase of this ratio,more performance gain can be acquired.
文摘In the paper,a new method for the measurement of the dynamic transmission crror of preci-sion hobbing machines using only one sensor is proposed.The dynamic transmission error i ob-tained by demodulating the phase-modulated signal according to the Hilbert transform priple.The results of dynamic testing show that the new method is effective.
