Waste water treatment process(WWTP)control has been attracting more and more attention.However,various undesired factors,such as disturbance,uncertainties,and strong nonlinear couplings,propose big challenges to the c...Waste water treatment process(WWTP)control has been attracting more and more attention.However,various undesired factors,such as disturbance,uncertainties,and strong nonlinear couplings,propose big challenges to the control of a WWTP.In order to improve the control performance of the closed-loop system and guarantee the discharge requirements of the effluent quality,rather than take the model dependent control approaches,an active disturbance rejection control(ADRC)is utilized.Based on the control signal and system output,a phase optimized ADRC(POADRC)is designed to control the dissolved oxygen and nitrate concentration in a WWTP.The phase advantage of the phase optimized extended state observer(POESO),convergence of the POESO,and stability of the closed-loop system are analyzed from the theoretical point of view.Finally,a commonly accepted benchmark simulation model no.1.(BSM1)is utilized to test the POESO and POADRC.Linear active disturbance rejection control(LADRC)and the suggested proportion-integration(PI)control are taken to make a comparative research.Both system responses and performance index values confirm the advantage of the POADRC over the LADRC and the suggested PI control.Numerical results show that,as a result of the leading phase of the total disturbance estimation,the POESO based POADRC is an effective and promising way to control the dissolved oxygen and nitrate concentration so as to ensure the effluent quality of a WWTP.展开更多
In wastewater treatment process(WWTP), the accurate and real-time monitoring values of key variables are crucial for the operational strategies. However, most of the existing methods have difficulty in obtaining the r...In wastewater treatment process(WWTP), the accurate and real-time monitoring values of key variables are crucial for the operational strategies. However, most of the existing methods have difficulty in obtaining the real-time values of some key variables in the process. In order to handle this issue, a data-driven intelligent monitoring system, using the soft sensor technique and data distribution service, is developed to monitor the concentrations of effluent total phosphorous(TP) and ammonia nitrogen(NH_4-N). In this intelligent monitoring system, a fuzzy neural network(FNN) is applied for designing the soft sensor model, and a principal component analysis(PCA) method is used to select the input variables of the soft sensor model. Moreover, data transfer software is exploited to insert the soft sensor technique to the supervisory control and data acquisition(SCADA) system. Finally, this proposed intelligent monitoring system is tested in several real plants to demonstrate the reliability and effectiveness of the monitoring performance.展开更多
The plan of heat-treatment process for 2014Al alloy is designed using orthogonal method, the heat-treatment experiments are made and the mechanical properties are tested according to the designed plan. The effect of s...The plan of heat-treatment process for 2014Al alloy is designed using orthogonal method, the heat-treatment experiments are made and the mechanical properties are tested according to the designed plan. The effect of solid solution temperature, ageing temperature, ageing time on microscopic mechanism of the mechanical properties of the 2014Al alloy is studied using microscope, transmission electron microscope. The best heat treatment process of the 2014Al alloy is developed. The experimental results indicate that the strength σ<sub>b</sub>, yield stress σ<sub>0.2</sub>, percentage elongation δ of the alloy reach separately 490～500 MPa, 450～490 MPa, 10～12％ adopting the new heat treatment process. Compared with GB, the strength increases 20～30％, the percentage elongation increases 30～40％. The mechanism of the new heat-treatment process is also discussed.展开更多
In the drinking water treatment processes, the optimization of the treatment is an issue of particular concern. In general, the process consists of many units as settling, coagulation, flocculation, sedimentation, fil...In the drinking water treatment processes, the optimization of the treatment is an issue of particular concern. In general, the process consists of many units as settling, coagulation, flocculation, sedimentation, filtration and disinfection. The optimization of the process consists of some measures to decrease the managing and monitoring expenses and improve the quality of the produced water. The objective of this study is to provide water treatment operators with methods and practices that enable to attain the most effective use of the facility and in consequence optimize the cubic meter price of the treated water. This paper proposes a review on optimization of drinking water treatment process by analyzing all of the water treatment units and gives some solutions in order to maximize the water treatment performances without compromising the water quality standards. Some practical solutions and methods are performed in the water treatment plant located in the middle of Morocco (Meknes).展开更多
According to different mechanism of mi-crobial degradation of organics,this article divided the treatment processes of garbage landfill into four kinds, analysed each kind of the treatment leachate process and present...According to different mechanism of mi-crobial degradation of organics,this article divided the treatment processes of garbage landfill into four kinds, analysed each kind of the treatment leachate process and presented a better improved process.展开更多
It is particularly important to comprehensively assess the biotoxicity variation of industrial wastewater along the treatment process for ensuring the water environment security.However,intensive studies on the biotox...It is particularly important to comprehensively assess the biotoxicity variation of industrial wastewater along the treatment process for ensuring the water environment security.However,intensive studies on the biotoxicity reduction of industrial wastewater are still limited.In this study,the toxic organics removal and biotoxicity reduction of coal chemical wastewater(CCW)along a novel full-scale treatment process based on the pretreatment process-anaerobic process-biological enhanced(BE)process-anoxic/oxic(A/O)process-advanced treatment process was evaluated.This process performed great removal efficiency of COD,total phenol,NH_(4)^(+)-N and total nitrogen.And the biotoxicity variation along the treatment units was analyzed from the perspective of acute biotoxicity,genotixicity and oxidative damage.The results indicated that the effluent of pretreatment process presented relatively high acute biotoxicity to Tetrahymena thermophila.But the acute biotoxicity was significantly reduced in BE-A/O process.And the genotoxicity and oxidative damage to Tetrahymena thermophila were significantly decreased after advanced treatment.The polar organics in CCW were identified as the main biotoxicity contributors.Phenols were positively correlated with acute biotoxicity,while the nitrogenous heterocyclic compounds and polycyclic aromatic hydrocarbons were positively correlated with genotoxicity.Although the biotoxicity was effectively reduced in the novel full-scale treatment process,the effluent still performed potential biotoxicity,which need to be further explored in order to reduce environmental risk.展开更多
In this article, the dissolved oxygen(DO) concentration control problem in wastewater treatment process(WWTP) is studied.Unlike existing control strategies that control DO concentration at a fixed value, here we devel...In this article, the dissolved oxygen(DO) concentration control problem in wastewater treatment process(WWTP) is studied.Unlike existing control strategies that control DO concentration at a fixed value, here we develop a different control framework.Under the proposed control framework, an intelligent control method of DO concentration based on reinforcement learning(RL)algorithm is presented to resolve the DO concentration control problem. By using the deep deterministic policy gradient(DDPG)algorithm, the DO concentration of the fifth tank in the activated sludge reactor can be adjusted dynamically. In addition, by designing two different reward functions and by analysing the relationships among effluent quality, energy consumption, and DO concentration, the target of energy-saving and emission-reducing is achieved. The simulation results indicate that the designed control method can reduce energy consumption while ensuring that the effluent quality meet the specified standards.展开更多
Wastewater treatment plays a crucial role in alleviating water shortages and protecting the environment from pollution.Due to the strong time variabilities and complex nonlinearities within wastewater treatment system...Wastewater treatment plays a crucial role in alleviating water shortages and protecting the environment from pollution.Due to the strong time variabilities and complex nonlinearities within wastewater treatment systems,devising an efficient optimal controller to reduce energy consumption while ensuring effluent quality is still a bottleneck that needs to be addressed.In this paper,in order to comprehensively consider different needs of the wastewater treatment process(WTTP),a two-objective model is to consider a scope,in which minimizing energy consumption and guaranteeing effluent quality are both considered to improve wastewater treatment efficiency.To efficiently solve the model functions,a grid-based dynamic multi-objective evolutionary decomposition algorithm,namely GD-MOEA/D,is designed.A GD-MOEA/D-based intelligent optimal controller(GD-MOEA/D-IOC)is devised to achieve tracking control of the main operating variables of the WTTP.Finally,the benchmark simulation model No.1(BSM1)is applied to verify the validity of the proposed approach.The experimental results demonstrate that the constructed models can catch the dynamics of WWTP accurately.Moreover,GD-MOEA/D has better optimization ability in solving the designed models.GD-MOEA/D-IOC can achieve a significant improvement in terms of reducing energy consumption and improving effluent quality.Therefore,the designed multi-objective intelligent optimal control method for WWTP has great potential to be applied to practical engineering since it can easily achieve a highly intelligent control in WTTP.展开更多
In order to investigate microbial community structures in different wastewater treatment processes and understand the relationship between the structures and the status of processes,the microbial community diversity,v...In order to investigate microbial community structures in different wastewater treatment processes and understand the relationship between the structures and the status of processes,the microbial community diversity,variety and distribution in five wastewater treatment pro cesses were studied by a culture-independent genetic fingerprinting technique single-strand conformation poly-morphism(SSCP).The five processes included denitrifying and phosphate-removal system(diminished N),Chinese traditional medicine wastewater treatment system(P),beer wastewater treatment system(W),fermentative biohydrogen-producing system(H),and sulfate-reduction system(S).The results indicated that the microbial community profiles in the wastewater bioreactors with the uniform status were very similar.The diversity of microbial populations was correlated with the complexity of organic contaminants in wastewater.Chinese traditional medicine wastewater contained more complex organic components;hence,the population diversity was higher than that of simple nutrient bioreactors fed with molasses wastewater.Compared with the strain bands in a simulated community,the relative proportion of some functional microbial populations in bioreactors was not dom-inant.Fermentative biohydrogen producer Ethanoligenens harbinense in the better condition bioreactor had only a 5% band density,and the Desulfovibrio sp.in the sulfate-reducing bioreactor had less than 1.5%band density.The SSCP profiles could identify the difference in microbial community structures in wastewater treatment processes,monitor some of the functional microbes in these processes,and consequently provide useful guidance for improving their efficiency.展开更多
Due to sensor malfunctions and communication faults,multiple missing patterns frequently happen in wastewater treatment process(WWTP).Nevertheless,the existing missing data imputation works cannot stand multiple missi...Due to sensor malfunctions and communication faults,multiple missing patterns frequently happen in wastewater treatment process(WWTP).Nevertheless,the existing missing data imputation works cannot stand multiple missing patterns because they have not sufficiently utilized of data information.In this article,a double-cycle weighted imputation(DCWI)method is proposed to deal with multiple missing patterns by maximizing the utilization of the available information in variables and instances.The proposed DCWI is comprised of two components:a double-cycle-based imputation sorting and a weighted K nearest neighbor-based imputation estimator.First,the double-cycle mechanism,associated with missing variable sorting and missing instance sorting,is applied to direct the missing values imputation.Second,the weighted K nearest neighbor-based imputation estimator is used to acquire the global similar instances and capture the volatility in the local region.The estimator preserves the original data characteristics as much as possible and enhances the imputation accuracy.Finally,experimental results on simulated and real WWTP datasets with non-stationarity and nonlinearity demonstrate that the proposed DCWI produces more accurate imputation results than comparison methods under different missing patterns and missing ratios.展开更多
Environmental problems have attracted much attention in recent years,especially for papermak-ing wastewater discharge.To reduce the loss of effluence discharge violation,quality-related multivariate statistical method...Environmental problems have attracted much attention in recent years,especially for papermak-ing wastewater discharge.To reduce the loss of effluence discharge violation,quality-related multivariate statistical methods have been successfully applied to achieve a robust wastewater treatment system.In this work,a new dynamic multiblock partial least squares(DMBPLS)is pro-posed to extract the time-varying information in a large-scale papermaking wastewater treatment process.By introducing augmented matrices to input and output data,the proposed method not only handles the dynamic characteristic of data and reduces the time delay of fault detection,but enhances the interpretability of model.In addition,the DMBPLS provides a capability of fault location,which has certain guiding significance for fault recovery.In comparison with other mod-els,the DMBPLS has a superior fault detection result.Specifically,the maximum fault detection rate of the DMBPLS is improved by 35.93%and 12.5%for bias and drifting faults,respectively,in comparison with partial least squares(PLS).展开更多
The sour gas sweetening is one of the main processes in gas industries. Gas sweetening is done through chemical processes. Therefore, it requires high cost and energy. The results show that increasing the operating te...The sour gas sweetening is one of the main processes in gas industries. Gas sweetening is done through chemical processes. Therefore, it requires high cost and energy. The results show that increasing the operating temperature increases the mass transfer coefficient and increases the mass transfer rate. Theoretical and experimental data show that sulfur removal in 4.5 W magnetic field is desirable. The increase in sulfur removal percentage in the magnetic field of 4.5 W and 6.75 W is about 16.4% and 15.2%, respectively. According to the obtained results, the effect of temperature increase from 18.8°C to 23.4°C is more evident than the effect of temperature change from 23.4°C to 32.2°C. Because more thermal energy is needed to provide higher temperatures. Therefore, the temperature of 23.4°C is reported as the optimal temperature. The results of this research show that the percentage of sulfur removal is also high at this temperature.展开更多
The pyrolysis properties of five different pyrolysis tars, which the tars from 1# to 5# are obtained by pyrolyzing the sewage sludges of anaerobic digestion and indigestion from the A2/O wastewater treatment process, ...The pyrolysis properties of five different pyrolysis tars, which the tars from 1# to 5# are obtained by pyrolyzing the sewage sludges of anaerobic digestion and indigestion from the A2/O wastewater treatment process, those from the activated sludge process and the indigested sludge from the continuous SBR process respectively, were studied by thermal gravimetric analysis at a heating rate of 10 ℃/min in the nitrogen atmosphere. The results show that the pyrolysis processes of the pyrolysis tars of 1#, 2#, 3# and 5# all can be divided into four stages: the stages of light organic compounds releasing, heavy polar organic compounds decomposition, heavy organic compounds decomposition and the residual organic compounds decomposition. However, the process of 4# pyrolysis tar is only divided into three stages: the stages of light organic compounds releasing, decomposition of heavy polar organic compounds and the residual heavy organic compounds respectively. Both the sludge anaerobic digestion and the "anaerobic" process in wastewater treatment processes make the content of light organic compounds in tars decrease, but make that of heavy organic compounds with complex structure increase. Besides, both make the pyrolysis properties of the tars become worse. The pyrolysis reaction mechanisms of the five pyrolysis tars have been studied with Coats-Redfern equation. It shows that there are the same mechanism functions in the first stage for the five tars and in the second and third stage for the tars of 1#, 2#, 3# and 5#, which is different with the function in the second stage for 4# tar. The five tars are easy to volatile.展开更多
In order to explore the biodegradation behavior of nonylphenolic compounds during wastewater treatment processing, two full-scale wastewater treatment plants were investigated and batch biodegradation experiments were...In order to explore the biodegradation behavior of nonylphenolic compounds during wastewater treatment processing, two full-scale wastewater treatment plants were investigated and batch biodegradation experiments were conducted. The biodegradation pathways under the various operational conditions were identified from batch experiments: shortening of ethoxy-chains dominated under the anaerobic condition, whereas oxidizing of the terminal alcoholic group prevailed over the other routes under the aerobic condition. Results showed that the anoxic condition could accelerate the biodegradation rates of nonylphenolic compounds, but had no influence on the biodegradation pathway. The biodegradation rates of nonylphenol (NP) and short-chain nonylphenol polyethoxylates (NPnEOs, n: number of ethoxy units) increased from the anaerobic condition, then the anoxic, finally to the aerobic condition, while those of long-chain NPnEOs and nonylphenoxy carboxylates (NPECs) seemed similar under the various conditions. Under every operational condition, long-chain NPnEOs showed the highest biodegradation activity, followed by NPECs and short-chain NPnEOs, whereas NP showed relatively recalcitrant characteristics especially under the anaerobic condition. In addition, introducing sulfate and nitrate to the anaerobic condition could enhance the biodegradation of NP and short-chain NPnEOs by supplying more positive redox potentials.展开更多
Dry sliding wear tests of a Cr-Mo-V cast hot-forging die steel was carried out within a load range of 50-300 N at 400 ℃ by a pin-on-disc high-temperature wear machine. The effect of heat treatment process on wear res...Dry sliding wear tests of a Cr-Mo-V cast hot-forging die steel was carried out within a load range of 50-300 N at 400 ℃ by a pin-on-disc high-temperature wear machine. The effect of heat treatment process on wear resistance was systematically studied in order to select heat treatment processes of the steel with high wear resistance. The morphology, structure and composition were analyzed using scanning electron microscopy (SEM), X-ray diffraction (XRD) and energy dispersive spectroscopy (EDS); wear mechanism was also discussed. Tribo-oxide layer was found to form on worn surfaces to reduce wear under low loads, but appear inside the matrix to increase wear under high loads. The tribo-oxides were mainly consisted of Fe3O4 and Fe2O3, FeO only appeared under a high load. Oxidative mild wear, transition of mild-severe wear in oxidative wear and extrusive wear took turns to operate with increasing the load. The wear resistance strongly depended on the selection of heat treatment processes or microstructures. It was found that bainite presented a better wear resistance than martensite plus bainite duplex structure, martensite structure was of the poorest wear resistance. The wear resistance increased with increasing austenizing temperature in the range of 920 to 1 120 ℃, then decreased at up to 1 220 ℃. As for tempering temperature and microstructure, the wear resistance increased in following order: 700 ℃ (tempered sorbite), 200 ℃ (tempered martensite), 440 to 650 ℃ (tempered troostite). An appropriate combination of hardness, toughness, microstructural thermal stability was required for a good wear resistance in high-temperature wear. The optimized heat treatment process was suggested for the cast hot-forging steel to be austenized at 1 020 to 1 120 ℃, quenched in oil, then tempered at 440 to 650 ℃ for 2 h.展开更多
A new method of extracting chlorogenic acid from flos lonicerae, and treating the materials with enzyme before being extracted by ethanol is developed, and the optimum conditions are also investigated in detail. Three...A new method of extracting chlorogenic acid from flos lonicerae, and treating the materials with enzyme before being extracted by ethanol is developed, and the optimum conditions are also investigated in detail. Three important factors, enzyme dosage, treatment time and treatment temperature are adapted to optimize the extraction process. The experimental results show that the extract yield of flos lonicerae and chlorogenic acid can be obviously increased by the cellulase treatment, 61.5 mg chlorogenic acid is obtained from 1.00 g flos lonicerae at most. The optimal temperature of enzymatic treatment is 40 50 ℃. Compared with the use of single cellulase, the combined treatment of cellulase and pectinase increase the extract yield obviously but fail to improve that of chlorogenic acid.展开更多
The reducing efficiencies of the commonly used heat treatment methods and fermentation processes on aflatoxin M1 (AFM1) in Nigeria were investigated. Seventy samples of fresh cow milk from both conventional and tradit...The reducing efficiencies of the commonly used heat treatment methods and fermentation processes on aflatoxin M1 (AFM1) in Nigeria were investigated. Seventy samples of fresh cow milk from both conventional and traditional dairy cattle herds were collected and analyzed for the determination of AFM1 using Cobra-cell incorporated high performance liquid chromatography. Of these analyzed samples, 56 (80.0%) tested positive for AFM1 out of which 3 milk samples with high AFM1 concentrations were selectively pooled and subjected to varied conditions of heat treatments and fermentation processes using both indigenized and exotic strains of lactic acid bacteria (Lactobacillus bulgaricus + Streptococcus thermophilus and L. rhamnosus and L. plantarum) as starter cultures respectively. Both processes used either singly or combined, demonstrated high degrees of reducing effects on AFM1 levels. Sterilization of the milk at 121?C and 80?C under the same condition of time (15 - 20) min showed significant reduction of up to 58.8% (p 0.05) in the level of AFM1 when compared with the initial mean AFM1 concentration of the untreated fresh milk. The situation was however different around the boiling temperature of 100?C at which point the level of AFM1 reduction was found to be inconsistent. The indigenized combined strains showed some slight margins of AFM1 reduction in the proportions of (20.5, 30.8 and 43.9)% over and above that of the exotic strains (17.4, 30.0 and 41.1)% in 12 h, 48 h and 72 h of fermentation respectively. Generally, fermentation alone showed lower reduction of AFM1 in milk from 24.5% to 43.9% compared with the reducing activities of (35.4 to 58.8)% when heat-treated milk samples were subsequently subjected to varied fermentation conditions.展开更多
Oil storage is a source of volatile organic compounds( VOCs). Volatile organic compounds can cause different damages to the environment,animals and plants. Therefore, it is important to control the discharge of VOCs i...Oil storage is a source of volatile organic compounds( VOCs). Volatile organic compounds can cause different damages to the environment,animals and plants. Therefore, it is important to control the discharge of VOCs in oil storage. In this paper,the control technology of sources of VOCs pollution in oil storage was analyzed from the source,process and end treatment,and measures for the prevention and control of VOCs pollution in oil storage were proposed.展开更多
A laboratory scale test was conducted in a combined membrane process (CMP) with a capacity of 2.91 m3/d for 240 d to treat the mixed wastewater of humidity condensate, hygiene wastewater and urine in submarine cabin d...A laboratory scale test was conducted in a combined membrane process (CMP) with a capacity of 2.91 m3/d for 240 d to treat the mixed wastewater of humidity condensate, hygiene wastewater and urine in submarine cabin during prolonged voyage. Removal performance of chemical oxygen demand (COD), ammonia nitrogen (NH4+-N), turbidity and anionic surfactants (LAS) was investigated under different conditions. It was observed that the effluent COD, NH4+-N, turbidity and LAS flocculated in ranges of 0.19-0.85 mg/L, 0.03-0.18 mg/L, 0.0-0.15 NTU and 0.0-0.05 mg/L, respectively in spite of considerable fluctuation in corresponding influent of 2120-5350 mg/L, 79.5-129.3 mg/L, 110-181.1NTU and 4.9-5.4 mg/L. The effluent quality of the CMP could meet the requirements of mechanical water and hygiene water according to the class I water quality standards in China (GB3838-2002). The removal rates of COD, NH4+-N, turbidity and LAS removed in the MBR were more than 90%, which indicated that biodegradation is indispensable and plays a major role in the wastewater treatment and reuse. A model, built on the back propagation neural network (BPNN) theory, was developed for the simulation of CMP and produced high reliability. The average error of COD and NH4+-N was 5.14% and 6.20%, respectively, and the root mean squared error of turbidity and LAS was 2.76% and 1.41%, respectively. The results indicated that the model well fitted the laboratory data, and was able to simulate the removal of COD, NH4+-N, turbidity and LAS. It also suggested that the model proposed could reflect and manage the operation of CMP for the treatment of the mixed wastewaters in submarine.展开更多
基金supported by the Key program of Beijing Municipal Education Commission(KZ201810011012)National Natural Science Foundation of China(61873005)Support Project of High-level Teachers in Beijing Municipal Universities in the Period of 13th Fiveyear Plan(CIT&TCD201704044)。
文摘Waste water treatment process(WWTP)control has been attracting more and more attention.However,various undesired factors,such as disturbance,uncertainties,and strong nonlinear couplings,propose big challenges to the control of a WWTP.In order to improve the control performance of the closed-loop system and guarantee the discharge requirements of the effluent quality,rather than take the model dependent control approaches,an active disturbance rejection control(ADRC)is utilized.Based on the control signal and system output,a phase optimized ADRC(POADRC)is designed to control the dissolved oxygen and nitrate concentration in a WWTP.The phase advantage of the phase optimized extended state observer(POESO),convergence of the POESO,and stability of the closed-loop system are analyzed from the theoretical point of view.Finally,a commonly accepted benchmark simulation model no.1.(BSM1)is utilized to test the POESO and POADRC.Linear active disturbance rejection control(LADRC)and the suggested proportion-integration(PI)control are taken to make a comparative research.Both system responses and performance index values confirm the advantage of the POADRC over the LADRC and the suggested PI control.Numerical results show that,as a result of the leading phase of the total disturbance estimation,the POESO based POADRC is an effective and promising way to control the dissolved oxygen and nitrate concentration so as to ensure the effluent quality of a WWTP.
基金Supported by the National Natural Science Foundation of China(61622301,61533002)Beijing Natural Science Foundation(4172005)Major National Science and Technology Project(2017ZX07104)
文摘In wastewater treatment process(WWTP), the accurate and real-time monitoring values of key variables are crucial for the operational strategies. However, most of the existing methods have difficulty in obtaining the real-time values of some key variables in the process. In order to handle this issue, a data-driven intelligent monitoring system, using the soft sensor technique and data distribution service, is developed to monitor the concentrations of effluent total phosphorous(TP) and ammonia nitrogen(NH_4-N). In this intelligent monitoring system, a fuzzy neural network(FNN) is applied for designing the soft sensor model, and a principal component analysis(PCA) method is used to select the input variables of the soft sensor model. Moreover, data transfer software is exploited to insert the soft sensor technique to the supervisory control and data acquisition(SCADA) system. Finally, this proposed intelligent monitoring system is tested in several real plants to demonstrate the reliability and effectiveness of the monitoring performance.
文摘The plan of heat-treatment process for 2014Al alloy is designed using orthogonal method, the heat-treatment experiments are made and the mechanical properties are tested according to the designed plan. The effect of solid solution temperature, ageing temperature, ageing time on microscopic mechanism of the mechanical properties of the 2014Al alloy is studied using microscope, transmission electron microscope. The best heat treatment process of the 2014Al alloy is developed. The experimental results indicate that the strength σ<sub>b</sub>, yield stress σ<sub>0.2</sub>, percentage elongation δ of the alloy reach separately 490～500 MPa, 450～490 MPa, 10～12％ adopting the new heat treatment process. Compared with GB, the strength increases 20～30％, the percentage elongation increases 30～40％. The mechanism of the new heat-treatment process is also discussed.
文摘In the drinking water treatment processes, the optimization of the treatment is an issue of particular concern. In general, the process consists of many units as settling, coagulation, flocculation, sedimentation, filtration and disinfection. The optimization of the process consists of some measures to decrease the managing and monitoring expenses and improve the quality of the produced water. The objective of this study is to provide water treatment operators with methods and practices that enable to attain the most effective use of the facility and in consequence optimize the cubic meter price of the treated water. This paper proposes a review on optimization of drinking water treatment process by analyzing all of the water treatment units and gives some solutions in order to maximize the water treatment performances without compromising the water quality standards. Some practical solutions and methods are performed in the water treatment plant located in the middle of Morocco (Meknes).
文摘According to different mechanism of mi-crobial degradation of organics,this article divided the treatment processes of garbage landfill into four kinds, analysed each kind of the treatment leachate process and presented a better improved process.
基金supported by the Natural Science Foundation of Shandong Province,China(No.ZR2021QE227)the Natural Science Foundation of Shandong Province,China(No.ZR2021QE272)+1 种基金the Open Project of State Key Laboratory of Urban Water Resource and Environment,Harbin Institute of Technology(No.ES202120)the Taishan Scholars Program of Shandong Province,China(No.tsqn201812091)。
文摘It is particularly important to comprehensively assess the biotoxicity variation of industrial wastewater along the treatment process for ensuring the water environment security.However,intensive studies on the biotoxicity reduction of industrial wastewater are still limited.In this study,the toxic organics removal and biotoxicity reduction of coal chemical wastewater(CCW)along a novel full-scale treatment process based on the pretreatment process-anaerobic process-biological enhanced(BE)process-anoxic/oxic(A/O)process-advanced treatment process was evaluated.This process performed great removal efficiency of COD,total phenol,NH_(4)^(+)-N and total nitrogen.And the biotoxicity variation along the treatment units was analyzed from the perspective of acute biotoxicity,genotixicity and oxidative damage.The results indicated that the effluent of pretreatment process presented relatively high acute biotoxicity to Tetrahymena thermophila.But the acute biotoxicity was significantly reduced in BE-A/O process.And the genotoxicity and oxidative damage to Tetrahymena thermophila were significantly decreased after advanced treatment.The polar organics in CCW were identified as the main biotoxicity contributors.Phenols were positively correlated with acute biotoxicity,while the nitrogenous heterocyclic compounds and polycyclic aromatic hydrocarbons were positively correlated with genotoxicity.Although the biotoxicity was effectively reduced in the novel full-scale treatment process,the effluent still performed potential biotoxicity,which need to be further explored in order to reduce environmental risk.
基金supported by the National Natural Science Foundation of China(Grant No.62173009)the National Key Research and Development Program of China(Grant No.2021ZD0112302)。
文摘In this article, the dissolved oxygen(DO) concentration control problem in wastewater treatment process(WWTP) is studied.Unlike existing control strategies that control DO concentration at a fixed value, here we develop a different control framework.Under the proposed control framework, an intelligent control method of DO concentration based on reinforcement learning(RL)algorithm is presented to resolve the DO concentration control problem. By using the deep deterministic policy gradient(DDPG)algorithm, the DO concentration of the fifth tank in the activated sludge reactor can be adjusted dynamically. In addition, by designing two different reward functions and by analysing the relationships among effluent quality, energy consumption, and DO concentration, the target of energy-saving and emission-reducing is achieved. The simulation results indicate that the designed control method can reduce energy consumption while ensuring that the effluent quality meet the specified standards.
基金supported by the National Key Research and Development Project of China(Grant No.2018YFC1900800-5)the National Natural Science Foundation of China(Grant Nos.61773373,6153302,62021003+1 种基金61890930-5)Beijing Natural Science Foundation(Grant No.JQ19013)。
文摘Wastewater treatment plays a crucial role in alleviating water shortages and protecting the environment from pollution.Due to the strong time variabilities and complex nonlinearities within wastewater treatment systems,devising an efficient optimal controller to reduce energy consumption while ensuring effluent quality is still a bottleneck that needs to be addressed.In this paper,in order to comprehensively consider different needs of the wastewater treatment process(WTTP),a two-objective model is to consider a scope,in which minimizing energy consumption and guaranteeing effluent quality are both considered to improve wastewater treatment efficiency.To efficiently solve the model functions,a grid-based dynamic multi-objective evolutionary decomposition algorithm,namely GD-MOEA/D,is designed.A GD-MOEA/D-based intelligent optimal controller(GD-MOEA/D-IOC)is devised to achieve tracking control of the main operating variables of the WTTP.Finally,the benchmark simulation model No.1(BSM1)is applied to verify the validity of the proposed approach.The experimental results demonstrate that the constructed models can catch the dynamics of WWTP accurately.Moreover,GD-MOEA/D has better optimization ability in solving the designed models.GD-MOEA/D-IOC can achieve a significant improvement in terms of reducing energy consumption and improving effluent quality.Therefore,the designed multi-objective intelligent optimal control method for WWTP has great potential to be applied to practical engineering since it can easily achieve a highly intelligent control in WTTP.
基金This work was supported by the National Natural Science Foundation of China(Grant Nos.:50208006,30470054 and 50678049)China Postdoctoral Science Foundation(Grant No.:20070410266).
文摘In order to investigate microbial community structures in different wastewater treatment processes and understand the relationship between the structures and the status of processes,the microbial community diversity,variety and distribution in five wastewater treatment pro cesses were studied by a culture-independent genetic fingerprinting technique single-strand conformation poly-morphism(SSCP).The five processes included denitrifying and phosphate-removal system(diminished N),Chinese traditional medicine wastewater treatment system(P),beer wastewater treatment system(W),fermentative biohydrogen-producing system(H),and sulfate-reduction system(S).The results indicated that the microbial community profiles in the wastewater bioreactors with the uniform status were very similar.The diversity of microbial populations was correlated with the complexity of organic contaminants in wastewater.Chinese traditional medicine wastewater contained more complex organic components;hence,the population diversity was higher than that of simple nutrient bioreactors fed with molasses wastewater.Compared with the strain bands in a simulated community,the relative proportion of some functional microbial populations in bioreactors was not dom-inant.Fermentative biohydrogen producer Ethanoligenens harbinense in the better condition bioreactor had only a 5% band density,and the Desulfovibrio sp.in the sulfate-reducing bioreactor had less than 1.5%band density.The SSCP profiles could identify the difference in microbial community structures in wastewater treatment processes,monitor some of the functional microbes in these processes,and consequently provide useful guidance for improving their efficiency.
基金supported by the National Key Research and Development Project(Grant No.2018YFC1900800-5)the National Natural Science Foundation of China(Grant Nos.61890930-5,61903010,62021003 and 62125301)+1 种基金Beijing Natural Science Foundation(Grant No.KZ202110005009)Beijing Outstanding Young Scientist Program(Grant No.BJJWZYJH 01201910005020)。
文摘Due to sensor malfunctions and communication faults,multiple missing patterns frequently happen in wastewater treatment process(WWTP).Nevertheless,the existing missing data imputation works cannot stand multiple missing patterns because they have not sufficiently utilized of data information.In this article,a double-cycle weighted imputation(DCWI)method is proposed to deal with multiple missing patterns by maximizing the utilization of the available information in variables and instances.The proposed DCWI is comprised of two components:a double-cycle-based imputation sorting and a weighted K nearest neighbor-based imputation estimator.First,the double-cycle mechanism,associated with missing variable sorting and missing instance sorting,is applied to direct the missing values imputation.Second,the weighted K nearest neighbor-based imputation estimator is used to acquire the global similar instances and capture the volatility in the local region.The estimator preserves the original data characteristics as much as possible and enhances the imputation accuracy.Finally,experimental results on simulated and real WWTP datasets with non-stationarity and nonlinearity demonstrate that the proposed DCWI produces more accurate imputation results than comparison methods under different missing patterns and missing ratios.
基金supported by Student’s Platform for Innovation and Entrepreneurship Training Program in Jiangsu Province(no.202010298029Z)Guangdong Provincial Natural Science Foundation(no.2016A030306033).
文摘Environmental problems have attracted much attention in recent years,especially for papermak-ing wastewater discharge.To reduce the loss of effluence discharge violation,quality-related multivariate statistical methods have been successfully applied to achieve a robust wastewater treatment system.In this work,a new dynamic multiblock partial least squares(DMBPLS)is pro-posed to extract the time-varying information in a large-scale papermaking wastewater treatment process.By introducing augmented matrices to input and output data,the proposed method not only handles the dynamic characteristic of data and reduces the time delay of fault detection,but enhances the interpretability of model.In addition,the DMBPLS provides a capability of fault location,which has certain guiding significance for fault recovery.In comparison with other mod-els,the DMBPLS has a superior fault detection result.Specifically,the maximum fault detection rate of the DMBPLS is improved by 35.93%and 12.5%for bias and drifting faults,respectively,in comparison with partial least squares(PLS).
文摘The sour gas sweetening is one of the main processes in gas industries. Gas sweetening is done through chemical processes. Therefore, it requires high cost and energy. The results show that increasing the operating temperature increases the mass transfer coefficient and increases the mass transfer rate. Theoretical and experimental data show that sulfur removal in 4.5 W magnetic field is desirable. The increase in sulfur removal percentage in the magnetic field of 4.5 W and 6.75 W is about 16.4% and 15.2%, respectively. According to the obtained results, the effect of temperature increase from 18.8°C to 23.4°C is more evident than the effect of temperature change from 23.4°C to 32.2°C. Because more thermal energy is needed to provide higher temperatures. Therefore, the temperature of 23.4°C is reported as the optimal temperature. The results of this research show that the percentage of sulfur removal is also high at this temperature.
基金supported by the project of Tianjin higher education under contract (20060522)the project of Tianjin Polytechnic University (2230004)
文摘The pyrolysis properties of five different pyrolysis tars, which the tars from 1# to 5# are obtained by pyrolyzing the sewage sludges of anaerobic digestion and indigestion from the A2/O wastewater treatment process, those from the activated sludge process and the indigested sludge from the continuous SBR process respectively, were studied by thermal gravimetric analysis at a heating rate of 10 ℃/min in the nitrogen atmosphere. The results show that the pyrolysis processes of the pyrolysis tars of 1#, 2#, 3# and 5# all can be divided into four stages: the stages of light organic compounds releasing, heavy polar organic compounds decomposition, heavy organic compounds decomposition and the residual organic compounds decomposition. However, the process of 4# pyrolysis tar is only divided into three stages: the stages of light organic compounds releasing, decomposition of heavy polar organic compounds and the residual heavy organic compounds respectively. Both the sludge anaerobic digestion and the "anaerobic" process in wastewater treatment processes make the content of light organic compounds in tars decrease, but make that of heavy organic compounds with complex structure increase. Besides, both make the pyrolysis properties of the tars become worse. The pyrolysis reaction mechanisms of the five pyrolysis tars have been studied with Coats-Redfern equation. It shows that there are the same mechanism functions in the first stage for the five tars and in the second and third stage for the tars of 1#, 2#, 3# and 5#, which is different with the function in the second stage for 4# tar. The five tars are easy to volatile.
基金supported by the National Natural Science Foundation of China (No. 51138009)
文摘In order to explore the biodegradation behavior of nonylphenolic compounds during wastewater treatment processing, two full-scale wastewater treatment plants were investigated and batch biodegradation experiments were conducted. The biodegradation pathways under the various operational conditions were identified from batch experiments: shortening of ethoxy-chains dominated under the anaerobic condition, whereas oxidizing of the terminal alcoholic group prevailed over the other routes under the aerobic condition. Results showed that the anoxic condition could accelerate the biodegradation rates of nonylphenolic compounds, but had no influence on the biodegradation pathway. The biodegradation rates of nonylphenol (NP) and short-chain nonylphenol polyethoxylates (NPnEOs, n: number of ethoxy units) increased from the anaerobic condition, then the anoxic, finally to the aerobic condition, while those of long-chain NPnEOs and nonylphenoxy carboxylates (NPECs) seemed similar under the various conditions. Under every operational condition, long-chain NPnEOs showed the highest biodegradation activity, followed by NPECs and short-chain NPnEOs, whereas NP showed relatively recalcitrant characteristics especially under the anaerobic condition. In addition, introducing sulfate and nitrate to the anaerobic condition could enhance the biodegradation of NP and short-chain NPnEOs by supplying more positive redox potentials.
基金Item Sponsored by National Nature Science Foundation of China(51071078)
文摘Dry sliding wear tests of a Cr-Mo-V cast hot-forging die steel was carried out within a load range of 50-300 N at 400 ℃ by a pin-on-disc high-temperature wear machine. The effect of heat treatment process on wear resistance was systematically studied in order to select heat treatment processes of the steel with high wear resistance. The morphology, structure and composition were analyzed using scanning electron microscopy (SEM), X-ray diffraction (XRD) and energy dispersive spectroscopy (EDS); wear mechanism was also discussed. Tribo-oxide layer was found to form on worn surfaces to reduce wear under low loads, but appear inside the matrix to increase wear under high loads. The tribo-oxides were mainly consisted of Fe3O4 and Fe2O3, FeO only appeared under a high load. Oxidative mild wear, transition of mild-severe wear in oxidative wear and extrusive wear took turns to operate with increasing the load. The wear resistance strongly depended on the selection of heat treatment processes or microstructures. It was found that bainite presented a better wear resistance than martensite plus bainite duplex structure, martensite structure was of the poorest wear resistance. The wear resistance increased with increasing austenizing temperature in the range of 920 to 1 120 ℃, then decreased at up to 1 220 ℃. As for tempering temperature and microstructure, the wear resistance increased in following order: 700 ℃ (tempered sorbite), 200 ℃ (tempered martensite), 440 to 650 ℃ (tempered troostite). An appropriate combination of hardness, toughness, microstructural thermal stability was required for a good wear resistance in high-temperature wear. The optimized heat treatment process was suggested for the cast hot-forging steel to be austenized at 1 020 to 1 120 ℃, quenched in oil, then tempered at 440 to 650 ℃ for 2 h.
文摘A new method of extracting chlorogenic acid from flos lonicerae, and treating the materials with enzyme before being extracted by ethanol is developed, and the optimum conditions are also investigated in detail. Three important factors, enzyme dosage, treatment time and treatment temperature are adapted to optimize the extraction process. The experimental results show that the extract yield of flos lonicerae and chlorogenic acid can be obviously increased by the cellulase treatment, 61.5 mg chlorogenic acid is obtained from 1.00 g flos lonicerae at most. The optimal temperature of enzymatic treatment is 40 50 ℃. Compared with the use of single cellulase, the combined treatment of cellulase and pectinase increase the extract yield obviously but fail to improve that of chlorogenic acid.
文摘The reducing efficiencies of the commonly used heat treatment methods and fermentation processes on aflatoxin M1 (AFM1) in Nigeria were investigated. Seventy samples of fresh cow milk from both conventional and traditional dairy cattle herds were collected and analyzed for the determination of AFM1 using Cobra-cell incorporated high performance liquid chromatography. Of these analyzed samples, 56 (80.0%) tested positive for AFM1 out of which 3 milk samples with high AFM1 concentrations were selectively pooled and subjected to varied conditions of heat treatments and fermentation processes using both indigenized and exotic strains of lactic acid bacteria (Lactobacillus bulgaricus + Streptococcus thermophilus and L. rhamnosus and L. plantarum) as starter cultures respectively. Both processes used either singly or combined, demonstrated high degrees of reducing effects on AFM1 levels. Sterilization of the milk at 121?C and 80?C under the same condition of time (15 - 20) min showed significant reduction of up to 58.8% (p 0.05) in the level of AFM1 when compared with the initial mean AFM1 concentration of the untreated fresh milk. The situation was however different around the boiling temperature of 100?C at which point the level of AFM1 reduction was found to be inconsistent. The indigenized combined strains showed some slight margins of AFM1 reduction in the proportions of (20.5, 30.8 and 43.9)% over and above that of the exotic strains (17.4, 30.0 and 41.1)% in 12 h, 48 h and 72 h of fermentation respectively. Generally, fermentation alone showed lower reduction of AFM1 in milk from 24.5% to 43.9% compared with the reducing activities of (35.4 to 58.8)% when heat-treated milk samples were subsequently subjected to varied fermentation conditions.
文摘Oil storage is a source of volatile organic compounds( VOCs). Volatile organic compounds can cause different damages to the environment,animals and plants. Therefore, it is important to control the discharge of VOCs in oil storage. In this paper,the control technology of sources of VOCs pollution in oil storage was analyzed from the source,process and end treatment,and measures for the prevention and control of VOCs pollution in oil storage were proposed.
基金supported by the National Nature Science Foundation of China(Grant No.51372038)the Key Research and Development Program of Jiangsu Science and Technology Department(Grant No.BE2015678)+1 种基金the Science and Technology Research Program of Jiangsu Transport Department(Grant No.2015T32)the Scientific Research Foundation of Graduate School of Southeast University(Grant No.YBJJ1566)
基金This work was supported by the Heilongjiang Natural Science Foundation(No.E2007-04)the National Natural Science Foundation of China(No.50908062)the State Key Laboratory of Urban Water Resource and Environment(No.HIT-QAK200808).
文摘A laboratory scale test was conducted in a combined membrane process (CMP) with a capacity of 2.91 m3/d for 240 d to treat the mixed wastewater of humidity condensate, hygiene wastewater and urine in submarine cabin during prolonged voyage. Removal performance of chemical oxygen demand (COD), ammonia nitrogen (NH4+-N), turbidity and anionic surfactants (LAS) was investigated under different conditions. It was observed that the effluent COD, NH4+-N, turbidity and LAS flocculated in ranges of 0.19-0.85 mg/L, 0.03-0.18 mg/L, 0.0-0.15 NTU and 0.0-0.05 mg/L, respectively in spite of considerable fluctuation in corresponding influent of 2120-5350 mg/L, 79.5-129.3 mg/L, 110-181.1NTU and 4.9-5.4 mg/L. The effluent quality of the CMP could meet the requirements of mechanical water and hygiene water according to the class I water quality standards in China (GB3838-2002). The removal rates of COD, NH4+-N, turbidity and LAS removed in the MBR were more than 90%, which indicated that biodegradation is indispensable and plays a major role in the wastewater treatment and reuse. A model, built on the back propagation neural network (BPNN) theory, was developed for the simulation of CMP and produced high reliability. The average error of COD and NH4+-N was 5.14% and 6.20%, respectively, and the root mean squared error of turbidity and LAS was 2.76% and 1.41%, respectively. The results indicated that the model well fitted the laboratory data, and was able to simulate the removal of COD, NH4+-N, turbidity and LAS. It also suggested that the model proposed could reflect and manage the operation of CMP for the treatment of the mixed wastewaters in submarine.
