Multiple failure modes tend to be identified in the reliability analysis of a redundant truss structure.This identification process involves updating the model for identifying the next potential failure members.Herein...Multiple failure modes tend to be identified in the reliability analysis of a redundant truss structure.This identification process involves updating the model for identifying the next potential failure members.Herein we intend to update the finite element model automatically in the identification process of failure modes and further perform the system reliability analysis efficiently.This study presents a framework that is implemented through the joint simulation of MATLAB and APDL and consists of three parts:reliability index of a single member,identification of dominant failure modes,and system-level reliability analysis for system reliability analysis of truss structures.Firstly,RSM(response surface method)combines with a constrained optimization model to calculate the reliability indices ofmembers.Then theβ-unzipping method is adopted to identify the dominant failuremodes,and the system function in MATLAB,as well as the EKILL command in APDL,is used to facilitate the automatic update of the finite element model and realize load-redistribution.Besides,the differential equivalence recursion algorithmis performed to approximate the reliability indices of failuremodes efficiently and accurately.Eventually,the PNET(probabilistic network evaluation technique)is used to calculate the joint failure probability as well as the system reliability index.Two illustrative examples demonstrate the accuracy and efficiency of the proposed system reliability analysis framework through comparison with corresponding references.展开更多
Steel truss bridges are frequently used in bridge engineering because of their good ability of spanning capacity, construction and light self-weight. Main trusses are the critical component of steel truss bridge and t...Steel truss bridges are frequently used in bridge engineering because of their good ability of spanning capacity, construction and light self-weight. Main trusses are the critical component of steel truss bridge and the main truss are made of truss members linked by integral joints. This paper presents the mechanic performance of key joints, and the codified design of joints in steel truss girders according to the latest European norms. The results showed that the fatigue resistance of welded joints evaluation is necessary to predict, detect, and repair the crack in time for the safety service life of the bridge. The stresses of integral joint are greater than that of truss members;the stresses in the center area of the integral joint are greater than the stress at the edge.展开更多
Aiming at the requirements of intelligent loading and shipping in large household appliance industry,an automatic loading and unloading robot for refrigerator is proposed.The robot is a gantry truss robot,which is com...Aiming at the requirements of intelligent loading and shipping in large household appliance industry,an automatic loading and unloading robot for refrigerator is proposed.The robot is a gantry truss robot,which is composed of active support,passive support,beam and fixture components at both ends to realize the taking and placing of the refrigerator on the logistics transmission line to the truck.In the actual working conditions,the no-load truss robot experiment,found that the robot in the design problems,and the robot was optimized.It not only solves the safety hazards of the refrigerator when grabbing and stacking products,but also realizes the automation and intelligence of the refrigerator conveying process.展开更多
Poplar Laminated Veneer Lumber(Poplar LVL)is a new type of engineering materials with high strength,good reliability and small variability.Poplar LVL is manufactured from the fast-growing poplar,which is widely used i...Poplar Laminated Veneer Lumber(Poplar LVL)is a new type of engineering materials with high strength,good reliability and small variability.Poplar LVL is manufactured from the fast-growing poplar,which is widely used in packaging,furniture and others,however,is rarely adopted in construction.In order to explore the feasibility of poplar LVL trusses in construction of roof,four 4.5-m-span Fink-and-Howe trusses were designed and assembled,which were made of poplar LVL with bolted-and tooth-plated connections.Vertical static loading on the upper chord joints of a truss was imposed by self-balancing test device.The mechanical properties of trusses were examined.The ultimate load,deformation character and failure mode of each truss were measured,observed and analyzed.Furthermore,four types of analytical models with different joint connection assumptions were used to estimate the ultimate load and deflection.The results showed that the poplar LVL trusses were basically in elastic stage before the design load was reached,showing good working performance under the action of design load.The bearing capacity of the trusses of bolted connections was greater than that of the tooth-plated connections.As for the same joint connection type,the bearing capacity of Fink trusses exceeded that of Howe trusses.The poplar LVL light trusses of both types of connections showed good structural performance,which could be reasonably used for building roof systems.展开更多
基金support from the National Key R&D Program of China(Grant Nos.2021YFB2600605,2021YFB2600600)the Overseas Scholar Program in the Hebei Province(C20190514)+1 种基金from the State Key Laboratory of Mechanical Behavior and System Safety of Traffic Engineering Structures Project(ZZ2020-20)from the Youth Foundation of Hebei Science and Technology Research Project(QN2018108).
文摘Multiple failure modes tend to be identified in the reliability analysis of a redundant truss structure.This identification process involves updating the model for identifying the next potential failure members.Herein we intend to update the finite element model automatically in the identification process of failure modes and further perform the system reliability analysis efficiently.This study presents a framework that is implemented through the joint simulation of MATLAB and APDL and consists of three parts:reliability index of a single member,identification of dominant failure modes,and system-level reliability analysis for system reliability analysis of truss structures.Firstly,RSM(response surface method)combines with a constrained optimization model to calculate the reliability indices ofmembers.Then theβ-unzipping method is adopted to identify the dominant failuremodes,and the system function in MATLAB,as well as the EKILL command in APDL,is used to facilitate the automatic update of the finite element model and realize load-redistribution.Besides,the differential equivalence recursion algorithmis performed to approximate the reliability indices of failuremodes efficiently and accurately.Eventually,the PNET(probabilistic network evaluation technique)is used to calculate the joint failure probability as well as the system reliability index.Two illustrative examples demonstrate the accuracy and efficiency of the proposed system reliability analysis framework through comparison with corresponding references.
文摘Steel truss bridges are frequently used in bridge engineering because of their good ability of spanning capacity, construction and light self-weight. Main trusses are the critical component of steel truss bridge and the main truss are made of truss members linked by integral joints. This paper presents the mechanic performance of key joints, and the codified design of joints in steel truss girders according to the latest European norms. The results showed that the fatigue resistance of welded joints evaluation is necessary to predict, detect, and repair the crack in time for the safety service life of the bridge. The stresses of integral joint are greater than that of truss members;the stresses in the center area of the integral joint are greater than the stress at the edge.
文摘Aiming at the requirements of intelligent loading and shipping in large household appliance industry,an automatic loading and unloading robot for refrigerator is proposed.The robot is a gantry truss robot,which is composed of active support,passive support,beam and fixture components at both ends to realize the taking and placing of the refrigerator on the logistics transmission line to the truck.In the actual working conditions,the no-load truss robot experiment,found that the robot in the design problems,and the robot was optimized.It not only solves the safety hazards of the refrigerator when grabbing and stacking products,but also realizes the automation and intelligence of the refrigerator conveying process.
基金funded by National Key Research and Development Plan“Green Building and Building Industrialization”Key Special Project in 2017(Grant No.2017YFC0703505)Ministry of Housing and Urban-Rural Development Technology Project in 2015(Grant No.2015-K2-009).
文摘Poplar Laminated Veneer Lumber(Poplar LVL)is a new type of engineering materials with high strength,good reliability and small variability.Poplar LVL is manufactured from the fast-growing poplar,which is widely used in packaging,furniture and others,however,is rarely adopted in construction.In order to explore the feasibility of poplar LVL trusses in construction of roof,four 4.5-m-span Fink-and-Howe trusses were designed and assembled,which were made of poplar LVL with bolted-and tooth-plated connections.Vertical static loading on the upper chord joints of a truss was imposed by self-balancing test device.The mechanical properties of trusses were examined.The ultimate load,deformation character and failure mode of each truss were measured,observed and analyzed.Furthermore,four types of analytical models with different joint connection assumptions were used to estimate the ultimate load and deflection.The results showed that the poplar LVL trusses were basically in elastic stage before the design load was reached,showing good working performance under the action of design load.The bearing capacity of the trusses of bolted connections was greater than that of the tooth-plated connections.As for the same joint connection type,the bearing capacity of Fink trusses exceeded that of Howe trusses.The poplar LVL light trusses of both types of connections showed good structural performance,which could be reasonably used for building roof systems.
