Fine-grained silt is widely distributed in the Huanghe River Delta(HRD)in China,and the sedimentary structure is complex,meaning that the clay content in the silt is variable.The piezocone penetration test(CPTu)is the...Fine-grained silt is widely distributed in the Huanghe River Delta(HRD)in China,and the sedimentary structure is complex,meaning that the clay content in the silt is variable.The piezocone penetration test(CPTu)is the most widely approved in situ test method.It can be used to invert soil properties and interpret soil behavior.To analyse the strength properties of surface sediments in the HRD,this paper evaluated the friction angle and its inversion formula through the CPTu penetration test and monotonic simple shear test and other soil unit experiments.The evaluation showed that the empirical formula proposed by Kulhawy and Mayne had better prediction and inversion effect.The HRD silts with clay contents of 9.2%,21.4%and 30.3%were selected as samples for the CPTu variable rate penetration test.The results show as follows.(1)The effects of the clay content on the tip resistance and the pore pressure of silt under different penetration rates were summarized.The tip resistance Q_t is strongly dependent on the clay content of the silt,the B_(q)value of the silt tends to 0 and is not significantly affected by the change of the CPTu penetration rate.(2)Five soil behavior type classification charts and three soil behavior type indexes based on CPTu data were evaluated.The results show that the soil behavior type classification chart based on soil behavior type index ISBT,the Robertson 2010 behavior type classification chart are more suitable for the silty soil in the HRD.展开更多
Hyperspectral imaging instruments could capture detailed spatial information and rich spectral signs of observed scenes.Much spatial information and spectral signatures of hyperspectral images(HSIs)present greater pot...Hyperspectral imaging instruments could capture detailed spatial information and rich spectral signs of observed scenes.Much spatial information and spectral signatures of hyperspectral images(HSIs)present greater potential for detecting and classifying fine crops.The accurate classification of crop kinds utilizing hyperspectral remote sensing imaging(RSI)has become an indispensable application in the agricultural domain.It is significant for the prediction and growth monitoring of crop yields.Amongst the deep learning(DL)techniques,Convolution Neural Network(CNN)was the best method for classifying HSI for their incredible local contextual modeling ability,enabling spectral and spatial feature extraction.This article designs a Hybrid Multi-Strategy Aquila Optimization with a Deep Learning-Driven Crop Type Classification(HMAODL-CTC)algorithm onHSI.The proposed HMAODL-CTC model mainly intends to categorize different types of crops on HSI.To accomplish this,the presented HMAODL-CTC model initially carries out image preprocessing to improve image quality.In addition,the presented HMAODL-CTC model develops dilated convolutional neural network(CNN)for feature extraction.For hyperparameter tuning of the dilated CNN model,the HMAO algorithm is utilized.Eventually,the presented HMAODL-CTC model uses an extreme learning machine(ELM)model for crop type classification.A comprehensive set of simulations were performed to illustrate the enhanced performance of the presented HMAODL-CTC algorithm.Extensive comparison studies reported the improved performance of the presented HMAODL-CTC algorithm over other compared methods.展开更多
In recent years,as intelligent transportation systems(ITS)such as autonomous driving and advanced driver-assistance systems have become more popular,there has been a rise in the need for different sources of traffic s...In recent years,as intelligent transportation systems(ITS)such as autonomous driving and advanced driver-assistance systems have become more popular,there has been a rise in the need for different sources of traffic situation data.The classification of the road surface type,also known as the RST,is among the most essential of these situational data and can be utilized across the entirety of the ITS domain.Recently,the benefits of deep learning(DL)approaches for sensor-based RST classification have been demonstrated by automatic feature extraction without manual methods.The ability to extract important features is vital in making RST classification more accurate.This work investigates the most recent advances in DL algorithms for sensor-based RST classification and explores appropriate feature extraction models.We used different convolutional neural networks to understand the functional architecture better;we constructed an enhanced DL model called SE-ResNet,which uses residual connections and squeeze-and-excitation mod-ules to improve the classification performance.Comparative experiments with a publicly available benchmark dataset,the passive vehicular sensors dataset,have shown that SE-ResNet outperforms other state-of-the-art models.The proposed model achieved the highest accuracy of 98.41%and the highest F1-score of 98.19%when classifying surfaces into segments of dirt,cobblestone,or asphalt roads.Moreover,the proposed model significantly outperforms DL networks(CNN,LSTM,and CNN-LSTM).The proposed RE-ResNet achieved the classification accuracies of asphalt roads at 98.98,cobblestone roads at 97.02,and dirt roads at 99.56%,respectively.展开更多
Highly accurate vegetative type distribution information is of great significance for forestry resource monitoring and management.In order to improve the classification accuracy of forest types,Sentinel-1 and 2 data o...Highly accurate vegetative type distribution information is of great significance for forestry resource monitoring and management.In order to improve the classification accuracy of forest types,Sentinel-1 and 2 data of Changbai Mountain protection development zone were selected,and combined with DEM to construct a multi-featured random forest type classification model incorporating fusing intensity,texture,spectral,vegetation index and topography information and using random forest Gini index(GI)for optimization.The overall accuracy of classification was 94.60%and the Kappa coefficient was 0.933.Comparing the classification results before and after feature optimization,it shows that feature optimization has a greater impact on the classification accuracy.Comparing the classification results of random forest,maximum likelihood method and CART decision tree under the same conditions,it shows that the random forest has a higher performance and can be applied to forestry research work such as forest resource survey and monitoring.展开更多
Background:With improvements in next-generation DNA sequencing technology,lower cost is needed to collect genetic data.More machine learning techniques can be used to help with cancer analysis and diagnosis.Methods:We...Background:With improvements in next-generation DNA sequencing technology,lower cost is needed to collect genetic data.More machine learning techniques can be used to help with cancer analysis and diagnosis.Methods:We developed an ensemble machine learning system named performance-weighted-voting model for cancer type classification in 6,249 samples across 14 cancer types.Our ensemble system consists of five weak classifiers(logistic regression,SVM,random forest,XGBoost and neural networks).We first used cross-validation to get the predicted results for the five classifiers.The weights of the five weak classifiers can be obtained based on their predictive performance by solving linear regression functions.The final predicted probability of the performance-weighted-voting model for a cancer type can be determined by the summation of each classifier's weight multiplied by its predicted probability.Results:Using the somatic mutation count of each gene as the input feature,the overall accuracy of the performance-weighted-voting model reached 71.46%,which was significantly higher than the five weak classifiers and two other ensemble models:the hard-voting model and the soft-voting model.In addition,by analyzing the predictive pattern of the performance-weighted-voting model,we found that in most cancer types,higher tumor mutational burden can improve overall accuracy.Conclusion:This study has important clinical significance for identifying the origin of cancer,especially for those where the primary cannot be determined.In addition,our model presents a good strategy for using ensemble systems for cancer type classification.展开更多
Exploring the synergy types and optimization paths between Poverty Alleviation Effectiveness and Rural Revitalization is necessary for achieving the two centenary goals.Taking poverty alleviation counties in Hunan Pro...Exploring the synergy types and optimization paths between Poverty Alleviation Effectiveness and Rural Revitalization is necessary for achieving the two centenary goals.Taking poverty alleviation counties in Hunan Province,China as an example,our study proposed an indicator to measure the synergistic development between Poverty Alleviation Effectiveness and Rural Revitalization using the multi-index integrated evaluation method.Then,the coupling types were classified based on both the proposed indicator and regional characteristics.Besides,the corresponding optimization path for each coupling type was proposed to promote the synergistic development of Poverty Alleviation and Rural Revitalization.Results are as follows:1)Lower synergy focused on the southwestern Hunan,while low synergy is widely distributed(such as the west,southwest,northwest,and midland).Moderate synergy is in the midland,such as Huaihua and Chenzhou cities.High synergy is distributed in Yongzhou,Huaihua,Xiangxi cities,etc.Besides,only Hecheng City belongs to the higher synergy.2)This paper proposes corresponding development paths for different development characteristics and main problems from multiple perspectives of the protection system,industrial planning,and rural market.Continuously consolidate and enhance the effectiveness of Poverty Alleviation and Rural Revitalization to achieve coupled and synergistic development of the two systems.Our research results can provide theoretical support for implementing Poverty Alleviation and Rural Revitalization in Hunan Province,China.展开更多
To improve the classification method of body type, 103 young female college students in Jiaodong area(Shandong, China) were measured by a 3 D body scanning system, and variables of upper body parts were selected and a...To improve the classification method of body type, 103 young female college students in Jiaodong area(Shandong, China) were measured by a 3 D body scanning system, and variables of upper body parts were selected and analyzed by SPSS software. According to the indices such as the chest ratio, the chest sagittal diameter ratio, and the shoulder angle, the tested population was quickly clustered into six categories by the classification method of “size feature+shape index+front and back indices”, which were divided into flat chest body, graceful body, breast augmentation body, normal body, convex back body, and flat body. The proportion of various body types and classification rules were obtained. According to the classification rules, 103 samples and 15 new females’ body data were analyzed and verified. Finally, according to the descriptive statistical analysis of upper body-related indicators of young female in this area, the height and the chest circumference were selected as independent variables, regression analysis was carried out on 11 related indicators, and the mapping relationship between height and chest circumference was studied, which provided a mathematical model for the design of fit clothing structure of young females in Jiaodong area.展开更多
The characteristics of the raindrop size distribution(DSD)during regional freezing rain(FR)events that occur throughout the phase change(from liquid to solid)are poorly understood due to limited observations.We invest...The characteristics of the raindrop size distribution(DSD)during regional freezing rain(FR)events that occur throughout the phase change(from liquid to solid)are poorly understood due to limited observations.We investigate the evolution of microphysical parameters and the key formation mechanisms of regional FR using the DSDs from five disdrometer sites in January 2018 in the Jianghan Plain(JHP)of Central China.FR is identified via the size and velocity distribution measured from a disdrometer,the discrete Fréchet distancemethod,surface temperature,human observations,and sounding data.With the persistence of precipitation,the emergence of graupel or snowflakes significantly reduces the proportion of FR.The enhancement of this regional FR event is mainly dominated by the increase in the number concentration of raindrops but weakly affected by the diameters.To improve the accuracy of quantitative precipitation estimation for the FR event,a modified second-degree polynomial relation between the shapeμand slopeΛof gamma DSDs is derived,and a new Z-R(radar reflectivity to rain rate)relationship is developed.The mean values of mass-weighted mean diameters(D_(m))and generalized intercepts(lgN_(w))in FR are close to the stratiform results in the northern region of China.Both the melting of tiny-rimed graupels and large-dry snowflakes are a response to the formation of this regional FR process in the JHP,dominated by the joint influence of the physical mechanism of warm rain,vapor deposition,and aggregation/riming coupled with the effect of weak convective motion in some periods.展开更多
Due to the complex dynamic of aeolian and fluvial interacted processes behind the landform development,most of previous works started from classifying the types of landscape characterized by various aeolian and fluvia...Due to the complex dynamic of aeolian and fluvial interacted processes behind the landform development,most of previous works started from classifying the types of landscape characterized by various aeolian and fluvial features.Such classifications are usually generalized based on large geomorphic data set abstracted from satellite images without field verification and dynamic field data.In this study,we identified river banks in deserts as a unique geographical unit dominated by aeolian-fluvial processes.Three distinct locations have been identified as representative study cases,which are in the Keriya River Basin in the west,the Mu Bulag River Basin in the middle and the Xar Moron River Basin in the east of the northern China.The aeolian-fluvial interaction types were quantified based on site observation and measurement,topographic mapping and remote-sensing image analysis.Dimensional morphological relationship between river channel and adjacent sand dunes areas were explored.We concluded that different channels are often associated with different distributions of riparian dunes.The quantitative data enabled us to distinguish statistically four different types of landscape in aeolian-fluvial dominant environment,namely riverside dunes-straight channel,symmetrical interleaving dunes-meandering channel,river-island dunes-braiding channel,and grid-like dunes-anastomosing channel,aiming to provide compensational information to current aeolian-fluvial interaction studies.The angle of interaction between aeolian and fluvial systems,the windward and leeward sites of the bank,vegetation coverage and underlying landform determines the distribution,morphology,scale and direction of extension of the riparian dunes.The results of the work study can provide a reference for study of aeolian-fluvial interactions at different spatial scales in arid region.展开更多
The internal variability of a ten-member ensemble of the regional climate model REMO over Europe is investigated. It is shown that the annual cycle of internal variability behaves differently compared to earlier studi...The internal variability of a ten-member ensemble of the regional climate model REMO over Europe is investigated. It is shown that the annual cycle of internal variability behaves differently compared to earlier studies that focused on other regions. To gain better insight into the dependence of the internal variability on the boundary forcing variability, a circulation type classification is performed on the forcing data. It can be shown that especially in the winter season internal variability is dependent on the circulation type included in the boundary forcing, whereas in the summer season the level and pattern of internal variability is rather independent from the circulation type of the driving field. It is concluded that for Europe the internal variability of REMO in winter is governed by circulation patterns related to the North-Atlantic Oscillation, whereas in summer local processes play a bigger role.展开更多
LiDAR data are becoming increasingly available,which has opened up many new applications.One such application is crop type mapping.Accurate crop type maps are critical for monitoring water use,estimating harvests and ...LiDAR data are becoming increasingly available,which has opened up many new applications.One such application is crop type mapping.Accurate crop type maps are critical for monitoring water use,estimating harvests and in precision agriculture.The traditional approach to obtaining maps of cultivated fields is by manually digitizing the fields from satellite or aerial imagery and then assigning crop type labels to each field-often informed by data collected during ground and aerial surveys.However,manual digitizing and labeling is time-consuming,expensive and subject to human error.Automated remote sensing methods is a cost-effective alternative,with machine learning gaining popularity for classifying crop types.This study evaluated the use of LiDAR data,Sentinel-2 imagery,aerial imagery and machine learning for differentiating five crop types in an intensively cultivated area.Different combinations of the three datasets were evaluated along with ten machine learning.The classification results were interpreted by comparing overall accuracies,kappa,standard deviation and f-score.It was found that LiDAR data successfully differentiated between different crop types,with XGBoost providing the highest overall accuracy of 87.8%.Furthermore,the crop type maps produced using the LiDAR data were in general agreement with those obtained by using Sentinel-2 data,with LiDAR obtaining a mean overall accuracy of 84.3%and Sentinel-2 a mean overall accuracy of 83.6%.However,the combination of all three datasets proved to be the most effective at differentiating between the crop types,with RF providing the highest overall accuracy of 94.4%.These findings provide a foundation for selecting the appropriate combination of remotely sensed data sources and machine learning algorithms for operational crop type mapping.展开更多
Crop type data are an important piece of information for many applications in agriculture.Extracting crop type using remote sensing is not easy because multiple crops are usually planted into small parcels with limite...Crop type data are an important piece of information for many applications in agriculture.Extracting crop type using remote sensing is not easy because multiple crops are usually planted into small parcels with limited availability of satellite images due to weather conditions.In this research,we aim at producing crop maps for areas with abundant rainfall and small-sized parcels by making full use of Landsat 8 and HJ-1 charge-coupled device(CCD)data.We masked out non-vegetation areas by using Landsat 8 images and then extracted a crop map from a longterm time-series of HJ-1 CCD satellite images acquired at 30-m spatial resolution and two-day temporal resolution.To increase accuracy,four key phenological metrics of crops were extracted from time-series Normalized Difference Vegetation Index curves plotted from the HJ-1 CCD images.These phenological metrics were used to further identify each of the crop types with less,but easier to access,ancillary field survey data.We used crop area data from the Jingzhou statistical yearbook and 5.8-m spatial resolution ZY-3 satellite images to perform an accuracy assessment.The results show that our classification accuracy was 92%when compared with the highly accurate but limited ZY-3 images and matched up to 80%to the statistical crop areas.展开更多
基金The National Natural Science Foundation of China under contract No.U2006213。
文摘Fine-grained silt is widely distributed in the Huanghe River Delta(HRD)in China,and the sedimentary structure is complex,meaning that the clay content in the silt is variable.The piezocone penetration test(CPTu)is the most widely approved in situ test method.It can be used to invert soil properties and interpret soil behavior.To analyse the strength properties of surface sediments in the HRD,this paper evaluated the friction angle and its inversion formula through the CPTu penetration test and monotonic simple shear test and other soil unit experiments.The evaluation showed that the empirical formula proposed by Kulhawy and Mayne had better prediction and inversion effect.The HRD silts with clay contents of 9.2%,21.4%and 30.3%were selected as samples for the CPTu variable rate penetration test.The results show as follows.(1)The effects of the clay content on the tip resistance and the pore pressure of silt under different penetration rates were summarized.The tip resistance Q_t is strongly dependent on the clay content of the silt,the B_(q)value of the silt tends to 0 and is not significantly affected by the change of the CPTu penetration rate.(2)Five soil behavior type classification charts and three soil behavior type indexes based on CPTu data were evaluated.The results show that the soil behavior type classification chart based on soil behavior type index ISBT,the Robertson 2010 behavior type classification chart are more suitable for the silty soil in the HRD.
基金This work was supported by Princess Nourah bint Abdulrahman University Researchers Supporting Project number(PNURSP2023R384)Princess Nourah bint Abdulrahman University,Riyadh,Saudi Arabia.
文摘Hyperspectral imaging instruments could capture detailed spatial information and rich spectral signs of observed scenes.Much spatial information and spectral signatures of hyperspectral images(HSIs)present greater potential for detecting and classifying fine crops.The accurate classification of crop kinds utilizing hyperspectral remote sensing imaging(RSI)has become an indispensable application in the agricultural domain.It is significant for the prediction and growth monitoring of crop yields.Amongst the deep learning(DL)techniques,Convolution Neural Network(CNN)was the best method for classifying HSI for their incredible local contextual modeling ability,enabling spectral and spatial feature extraction.This article designs a Hybrid Multi-Strategy Aquila Optimization with a Deep Learning-Driven Crop Type Classification(HMAODL-CTC)algorithm onHSI.The proposed HMAODL-CTC model mainly intends to categorize different types of crops on HSI.To accomplish this,the presented HMAODL-CTC model initially carries out image preprocessing to improve image quality.In addition,the presented HMAODL-CTC model develops dilated convolutional neural network(CNN)for feature extraction.For hyperparameter tuning of the dilated CNN model,the HMAO algorithm is utilized.Eventually,the presented HMAODL-CTC model uses an extreme learning machine(ELM)model for crop type classification.A comprehensive set of simulations were performed to illustrate the enhanced performance of the presented HMAODL-CTC algorithm.Extensive comparison studies reported the improved performance of the presented HMAODL-CTC algorithm over other compared methods.
基金funded by National Research Council of Thailand (NRCT):An Integrated Road Safety Innovations of Pedestrian Crossing for Mortality and Injuries Reduction Among All Groups of Road Users,Contract No.N33A650757supported by the Thailand Science Research and Innovation Fund+1 种基金the University of Phayao (Grant No.FF66-UoE001)King Mongkut’s University of Technology North Bangkok underContract No.KMUTNB-66-KNOW-05.
文摘In recent years,as intelligent transportation systems(ITS)such as autonomous driving and advanced driver-assistance systems have become more popular,there has been a rise in the need for different sources of traffic situation data.The classification of the road surface type,also known as the RST,is among the most essential of these situational data and can be utilized across the entirety of the ITS domain.Recently,the benefits of deep learning(DL)approaches for sensor-based RST classification have been demonstrated by automatic feature extraction without manual methods.The ability to extract important features is vital in making RST classification more accurate.This work investigates the most recent advances in DL algorithms for sensor-based RST classification and explores appropriate feature extraction models.We used different convolutional neural networks to understand the functional architecture better;we constructed an enhanced DL model called SE-ResNet,which uses residual connections and squeeze-and-excitation mod-ules to improve the classification performance.Comparative experiments with a publicly available benchmark dataset,the passive vehicular sensors dataset,have shown that SE-ResNet outperforms other state-of-the-art models.The proposed model achieved the highest accuracy of 98.41%and the highest F1-score of 98.19%when classifying surfaces into segments of dirt,cobblestone,or asphalt roads.Moreover,the proposed model significantly outperforms DL networks(CNN,LSTM,and CNN-LSTM).The proposed RE-ResNet achieved the classification accuracies of asphalt roads at 98.98,cobblestone roads at 97.02,and dirt roads at 99.56%,respectively.
基金Supported by projects of National Natural Science Foundation of China(Nos.42171407,42077242)Natural Science Foundation of Jilin Province(No.20210101098JC)+1 种基金Open Fund of Key Laboratory of Urban Land Resources Monitoring and Simulation,MNR(No.KF-2020-05-024)National Key R&D Program of China(No.2021YFD1500100).
文摘Highly accurate vegetative type distribution information is of great significance for forestry resource monitoring and management.In order to improve the classification accuracy of forest types,Sentinel-1 and 2 data of Changbai Mountain protection development zone were selected,and combined with DEM to construct a multi-featured random forest type classification model incorporating fusing intensity,texture,spectral,vegetation index and topography information and using random forest Gini index(GI)for optimization.The overall accuracy of classification was 94.60%and the Kappa coefficient was 0.933.Comparing the classification results before and after feature optimization,it shows that feature optimization has a greater impact on the classification accuracy.Comparing the classification results of random forest,maximum likelihood method and CART decision tree under the same conditions,it shows that the random forest has a higher performance and can be applied to forestry research work such as forest resource survey and monitoring.
文摘Background:With improvements in next-generation DNA sequencing technology,lower cost is needed to collect genetic data.More machine learning techniques can be used to help with cancer analysis and diagnosis.Methods:We developed an ensemble machine learning system named performance-weighted-voting model for cancer type classification in 6,249 samples across 14 cancer types.Our ensemble system consists of five weak classifiers(logistic regression,SVM,random forest,XGBoost and neural networks).We first used cross-validation to get the predicted results for the five classifiers.The weights of the five weak classifiers can be obtained based on their predictive performance by solving linear regression functions.The final predicted probability of the performance-weighted-voting model for a cancer type can be determined by the summation of each classifier's weight multiplied by its predicted probability.Results:Using the somatic mutation count of each gene as the input feature,the overall accuracy of the performance-weighted-voting model reached 71.46%,which was significantly higher than the five weak classifiers and two other ensemble models:the hard-voting model and the soft-voting model.In addition,by analyzing the predictive pattern of the performance-weighted-voting model,we found that in most cancer types,higher tumor mutational burden can improve overall accuracy.Conclusion:This study has important clinical significance for identifying the origin of cancer,especially for those where the primary cannot be determined.In addition,our model presents a good strategy for using ensemble systems for cancer type classification.
基金Under the auspices of the National Natural Science Foundation of China(No.41971219,41571168)Natural Science Foundation of Hunan Province(No.2020JJ4372)Philosophy and Social Science Fund Project of Hunan Province(No.18ZDB015)。
文摘Exploring the synergy types and optimization paths between Poverty Alleviation Effectiveness and Rural Revitalization is necessary for achieving the two centenary goals.Taking poverty alleviation counties in Hunan Province,China as an example,our study proposed an indicator to measure the synergistic development between Poverty Alleviation Effectiveness and Rural Revitalization using the multi-index integrated evaluation method.Then,the coupling types were classified based on both the proposed indicator and regional characteristics.Besides,the corresponding optimization path for each coupling type was proposed to promote the synergistic development of Poverty Alleviation and Rural Revitalization.Results are as follows:1)Lower synergy focused on the southwestern Hunan,while low synergy is widely distributed(such as the west,southwest,northwest,and midland).Moderate synergy is in the midland,such as Huaihua and Chenzhou cities.High synergy is distributed in Yongzhou,Huaihua,Xiangxi cities,etc.Besides,only Hecheng City belongs to the higher synergy.2)This paper proposes corresponding development paths for different development characteristics and main problems from multiple perspectives of the protection system,industrial planning,and rural market.Continuously consolidate and enhance the effectiveness of Poverty Alleviation and Rural Revitalization to achieve coupled and synergistic development of the two systems.Our research results can provide theoretical support for implementing Poverty Alleviation and Rural Revitalization in Hunan Province,China.
文摘To improve the classification method of body type, 103 young female college students in Jiaodong area(Shandong, China) were measured by a 3 D body scanning system, and variables of upper body parts were selected and analyzed by SPSS software. According to the indices such as the chest ratio, the chest sagittal diameter ratio, and the shoulder angle, the tested population was quickly clustered into six categories by the classification method of “size feature+shape index+front and back indices”, which were divided into flat chest body, graceful body, breast augmentation body, normal body, convex back body, and flat body. The proportion of various body types and classification rules were obtained. According to the classification rules, 103 samples and 15 new females’ body data were analyzed and verified. Finally, according to the descriptive statistical analysis of upper body-related indicators of young female in this area, the height and the chest circumference were selected as independent variables, regression analysis was carried out on 11 related indicators, and the mapping relationship between height and chest circumference was studied, which provided a mathematical model for the design of fit clothing structure of young females in Jiaodong area.
基金supported by the National Natural Science Foundation of China(Grant Nos.41875170 and 41675136)the National Key Research and Development Program of China(2018YFC1507201 and 2018YFC1507905)the Guangxi Key Research and Development Program(AB20159013)。
文摘The characteristics of the raindrop size distribution(DSD)during regional freezing rain(FR)events that occur throughout the phase change(from liquid to solid)are poorly understood due to limited observations.We investigate the evolution of microphysical parameters and the key formation mechanisms of regional FR using the DSDs from five disdrometer sites in January 2018 in the Jianghan Plain(JHP)of Central China.FR is identified via the size and velocity distribution measured from a disdrometer,the discrete Fréchet distancemethod,surface temperature,human observations,and sounding data.With the persistence of precipitation,the emergence of graupel or snowflakes significantly reduces the proportion of FR.The enhancement of this regional FR event is mainly dominated by the increase in the number concentration of raindrops but weakly affected by the diameters.To improve the accuracy of quantitative precipitation estimation for the FR event,a modified second-degree polynomial relation between the shapeμand slopeΛof gamma DSDs is derived,and a new Z-R(radar reflectivity to rain rate)relationship is developed.The mean values of mass-weighted mean diameters(D_(m))and generalized intercepts(lgN_(w))in FR are close to the stratiform results in the northern region of China.Both the melting of tiny-rimed graupels and large-dry snowflakes are a response to the formation of this regional FR process in the JHP,dominated by the joint influence of the physical mechanism of warm rain,vapor deposition,and aggregation/riming coupled with the effect of weak convective motion in some periods.
基金Under the auspices of the National Natural Science Foundation of China(No.41801004,41871010)the Fundamental Research Funds for the Central Universities(No.GK202001003,GK202003067)+1 种基金China Postdoctoral Science Foundation(No.2020M673334)Natural Science Foundation of Shaanxi Province(No.2021JQ-313)。
文摘Due to the complex dynamic of aeolian and fluvial interacted processes behind the landform development,most of previous works started from classifying the types of landscape characterized by various aeolian and fluvial features.Such classifications are usually generalized based on large geomorphic data set abstracted from satellite images without field verification and dynamic field data.In this study,we identified river banks in deserts as a unique geographical unit dominated by aeolian-fluvial processes.Three distinct locations have been identified as representative study cases,which are in the Keriya River Basin in the west,the Mu Bulag River Basin in the middle and the Xar Moron River Basin in the east of the northern China.The aeolian-fluvial interaction types were quantified based on site observation and measurement,topographic mapping and remote-sensing image analysis.Dimensional morphological relationship between river channel and adjacent sand dunes areas were explored.We concluded that different channels are often associated with different distributions of riparian dunes.The quantitative data enabled us to distinguish statistically four different types of landscape in aeolian-fluvial dominant environment,namely riverside dunes-straight channel,symmetrical interleaving dunes-meandering channel,river-island dunes-braiding channel,and grid-like dunes-anastomosing channel,aiming to provide compensational information to current aeolian-fluvial interaction studies.The angle of interaction between aeolian and fluvial systems,the windward and leeward sites of the bank,vegetation coverage and underlying landform determines the distribution,morphology,scale and direction of extension of the riparian dunes.The results of the work study can provide a reference for study of aeolian-fluvial interactions at different spatial scales in arid region.
文摘The internal variability of a ten-member ensemble of the regional climate model REMO over Europe is investigated. It is shown that the annual cycle of internal variability behaves differently compared to earlier studies that focused on other regions. To gain better insight into the dependence of the internal variability on the boundary forcing variability, a circulation type classification is performed on the forcing data. It can be shown that especially in the winter season internal variability is dependent on the circulation type included in the boundary forcing, whereas in the summer season the level and pattern of internal variability is rather independent from the circulation type of the driving field. It is concluded that for Europe the internal variability of REMO in winter is governed by circulation patterns related to the North-Atlantic Oscillation, whereas in summer local processes play a bigger role.
基金This work forms part of a larger project titled“Salt Accumulation and Waterlogging Monitoring System(SAWMS)Development”which was initiated and funded by the Water Research Commission(WRC)of South Africa(contract number K5/2558//4)More information about this project is available in WRC Report No TT 782/18,titled SALT ACCUMULATION AND WATERLOGGING MONITORING SYSTEM(SAWMS)DEVELOPMENT(ISBN 978-0-6392-0084-2)+1 种基金available at www.wrc.org.za.This work was also supported by the National Research Foundation(grant number 112300)The authors would also like to thank www.linguafix.net for their language editing services.
文摘LiDAR data are becoming increasingly available,which has opened up many new applications.One such application is crop type mapping.Accurate crop type maps are critical for monitoring water use,estimating harvests and in precision agriculture.The traditional approach to obtaining maps of cultivated fields is by manually digitizing the fields from satellite or aerial imagery and then assigning crop type labels to each field-often informed by data collected during ground and aerial surveys.However,manual digitizing and labeling is time-consuming,expensive and subject to human error.Automated remote sensing methods is a cost-effective alternative,with machine learning gaining popularity for classifying crop types.This study evaluated the use of LiDAR data,Sentinel-2 imagery,aerial imagery and machine learning for differentiating five crop types in an intensively cultivated area.Different combinations of the three datasets were evaluated along with ten machine learning.The classification results were interpreted by comparing overall accuracies,kappa,standard deviation and f-score.It was found that LiDAR data successfully differentiated between different crop types,with XGBoost providing the highest overall accuracy of 87.8%.Furthermore,the crop type maps produced using the LiDAR data were in general agreement with those obtained by using Sentinel-2 data,with LiDAR obtaining a mean overall accuracy of 84.3%and Sentinel-2 a mean overall accuracy of 83.6%.However,the combination of all three datasets proved to be the most effective at differentiating between the crop types,with RF providing the highest overall accuracy of 94.4%.These findings provide a foundation for selecting the appropriate combination of remotely sensed data sources and machine learning algorithms for operational crop type mapping.
基金the Key Program of National Natural Science Foundation of China[grant numbers 51339004 and 51209163].
文摘Crop type data are an important piece of information for many applications in agriculture.Extracting crop type using remote sensing is not easy because multiple crops are usually planted into small parcels with limited availability of satellite images due to weather conditions.In this research,we aim at producing crop maps for areas with abundant rainfall and small-sized parcels by making full use of Landsat 8 and HJ-1 charge-coupled device(CCD)data.We masked out non-vegetation areas by using Landsat 8 images and then extracted a crop map from a longterm time-series of HJ-1 CCD satellite images acquired at 30-m spatial resolution and two-day temporal resolution.To increase accuracy,four key phenological metrics of crops were extracted from time-series Normalized Difference Vegetation Index curves plotted from the HJ-1 CCD images.These phenological metrics were used to further identify each of the crop types with less,but easier to access,ancillary field survey data.We used crop area data from the Jingzhou statistical yearbook and 5.8-m spatial resolution ZY-3 satellite images to perform an accuracy assessment.The results show that our classification accuracy was 92%when compared with the highly accurate but limited ZY-3 images and matched up to 80%to the statistical crop areas.
