To realize the resource utilization of the valuable metals in the titanium-containing blast furnace slag,the process route of “hydrochloric acid leaching-electrolysis-carbonization and carbon dioxide capture-preparat...To realize the resource utilization of the valuable metals in the titanium-containing blast furnace slag,the process route of “hydrochloric acid leaching-electrolysis-carbonization and carbon dioxide capture-preparation of calcium carbonate” was proposed.In this study,the influences of process conditions on the leaching rates of calcium,magnesium,aluminum,and iron and the phases of the leaching residue were investigated for the leaching process.The experimental results show that the HCl solution could selectively leach the elements from the titanium-containing blast furnace slag.The better leaching conditions are the HCl solution concentration of 4 mol/L,the leaching time of 30 min,the ratio of liquid volume to solid gas of 10 mL/g,and the stirring paddle speed of 300 r/min.Under the conditions,the leaching rates of calcium,magnesium,aluminum,and iron can reach 85.87%,73.41%,81.35%,and 59.08%,and the leaching rate of titanium is 10.71%.The iron and the aluminum are removed from the leachate to obtain iron-aluminum water purification agents,and the magnesium is removed from the leachate to obtain magnesium hydroxide.The leaching residue phase is dominated by perovskite,followed by magnesium silicate and tricalcium aluminate,and the titaniumrich material could be obtained from the leaching residue by desiliconization.展开更多
The recycling of waste printed circuit board(WPCBs) is of great significance for saving resources and protecting the environment. In this study, the WPCBs were pyrolyzed by microwave and the contained valuable metals ...The recycling of waste printed circuit board(WPCBs) is of great significance for saving resources and protecting the environment. In this study, the WPCBs were pyrolyzed by microwave and the contained valuable metals Cu, Sn and Pb were recovered from the pyrolyzed WPCBs. The effect of pyrolysis temperature and time on the recovery efficiency of valuable metals was investigated. Additionally, the characterization for morphology and surface elemental distribution of pyrolysis residues was carried out to investigate the pyrolysis mechanism. The plastic fiber boards turned into black carbides, and they can be easily separated from the metals by manual. The results indicate that 91.2%, 96.1% and 94.4% of Cu, Sn and Pb can be recovered after microwave pyrolysis at 700 °C for 60 minutes. After pyrolysis, about 79.8%(mass)solid products, 11.9%(mass) oil and 8.3%(mass) gas were produced. These gas and oil can be used as fuel and raw materials of organic chemicals, respectively. This process provides an efficient and energy-saving technology for recovering valuable metals from WPCBs.展开更多
The number of lithium-ion batteries(LIBs)is steadily increasing in order to meet the ever-growing demand for sustainable energy and a high quality of life for humankind.At the same time,the resulting large number of L...The number of lithium-ion batteries(LIBs)is steadily increasing in order to meet the ever-growing demand for sustainable energy and a high quality of life for humankind.At the same time,the resulting large number of LIB waste certainly poses safety hazards if it is not properly disposed of and will seriously harm the environment due to its inherent toxicity due to the use of toxic substances.Moreover,the consumption of many scarce precious metal resources is behind the mass production of batteries.In the light of severe environmental,resources,safety and recycling problems,recycling spent LIBs have become an essential urgently needed action to achieve sustainable social development.This review therefore critically analyses the value and the need for recycling of spent LIBs from a variety of resources and the environment.A range of existing technologies for recycling and reusing spent LIBs,such as pretreatment,pyrometallurgy,hydrometallurgy,and direct recycled methods,is subsequently summarized exclusively.In addition,the benefits and problems of the methods described above are analyzed in detail.It also introduces recycling progress of other LIB components,such as anodes,separators,and electrolytes,as well as the high-value cathode.Finally,the prospects for recycling LIBs are addressed in four ways(government,users,battery manufacturers,and recyclers).This review should contribute to the development of the recycling of used LIBs,particularly in support of industrialization and recycling processes.展开更多
In order to improve the refining effect of zinc ore and promote the development of this industry,taking the hydrometallurgical zinc smelting process as an example,this paper first establishes a model for the recycling...In order to improve the refining effect of zinc ore and promote the development of this industry,taking the hydrometallurgical zinc smelting process as an example,this paper first establishes a model for the recycling of waste residues in the hydrometallurgical process,proposes optimization measures based on proven comprehensive recycling technology for purifying residues to obtain higher valuable metal recovery rate,and provides reference for those in relevant fields.展开更多
Hydrodesulfurization(HDS)catalysts are widely used in petrochemical industries,playing a crucial role in desulfurization process to get high-quality oil.The generation of Al-based spent HDS catalyst is estimated to be...Hydrodesulfurization(HDS)catalysts are widely used in petrochemical industries,playing a crucial role in desulfurization process to get high-quality oil.The generation of Al-based spent HDS catalyst is estimated to be 1.2×105 tons per year around the world.The spent HDS catalysts have been regarded as an important secondary resource due to their abundant output,considerable metal value,and regeneration potential;however,if improperly handled,it would severely pollute the environment due to high content of heavy metals.Thus,the recovery of valuable metals from spent HDS catalysts is of great importance from both resource utilization and environmental protection points of view.In this work,recent advances in the spent HDS catalyst treatment technologies have been reviewed,focusing on the recovery of valuable transition metals and environmental impacts.Finally,typical commercial processes have been discussed,providing in-depth information for peer researchers to facilitate their future research work in designing more effective and environmentally friendly recycling processes.展开更多
High-manganese containing vanadium waste-water(HMVW)is commonly produced during the vanadium extraction process from vanadium titano-magnetite.HMVW cannot be reused and discharged directly,and is harmful to the enviro...High-manganese containing vanadium waste-water(HMVW)is commonly produced during the vanadium extraction process from vanadium titano-magnetite.HMVW cannot be reused and discharged directly,and is harmful to the environment and affect product quality due to heavy metals in the wastewater.The wastewater is usually treated by lime neutralization,but valuable metals(especially V and Mn)cannot be recovered.In this study,an efficient and environmentally friendly method was developed to recover valuable metals by using a solvent extraction-precipitation process.In the solvent extraction process,98.15%of vanadium was recovered,and the V2Os product,with a purity of 98.60%,was obtained under optimal conditions.For the precipitation process,91.05%of manganese was recovered as MnCO3 which meets the III grade standard of HG/T 2836-2011.Thermodynamic simulation analysis indicated that MnCO3 was selectively precipitated at pH 6.5 while Mg and Ca could hardly be precipitated.The results of X-ray diffraction and scanning electron microscopy demonstrated that the obtained V2Os and MnCO3 displayed a good degree of crystallinity.The treated wastewater can be returned for leaching,and resources(V and Mn)in the wastewater were utilized efficiently in an environmentally friendly way.Therefore,this study provides a novel method for the coextraction of V and Mn from HMVW.展开更多
基金Funded by the National Natural Science Foundation of China Youth Fund(No.52204419)the Liaoning Provincial Natural Science Foundation(No.2022-BS-076)the Guangxi Science and Technology Major Project(No.2021AA12013)。
文摘To realize the resource utilization of the valuable metals in the titanium-containing blast furnace slag,the process route of “hydrochloric acid leaching-electrolysis-carbonization and carbon dioxide capture-preparation of calcium carbonate” was proposed.In this study,the influences of process conditions on the leaching rates of calcium,magnesium,aluminum,and iron and the phases of the leaching residue were investigated for the leaching process.The experimental results show that the HCl solution could selectively leach the elements from the titanium-containing blast furnace slag.The better leaching conditions are the HCl solution concentration of 4 mol/L,the leaching time of 30 min,the ratio of liquid volume to solid gas of 10 mL/g,and the stirring paddle speed of 300 r/min.Under the conditions,the leaching rates of calcium,magnesium,aluminum,and iron can reach 85.87%,73.41%,81.35%,and 59.08%,and the leaching rate of titanium is 10.71%.The iron and the aluminum are removed from the leachate to obtain iron-aluminum water purification agents,and the magnesium is removed from the leachate to obtain magnesium hydroxide.The leaching residue phase is dominated by perovskite,followed by magnesium silicate and tricalcium aluminate,and the titaniumrich material could be obtained from the leaching residue by desiliconization.
基金supported by the National Key Research and Development Program of China (2019YFC1908404)the National Natural Science Foundation of China (Nos. 51834008, 51874040,52034002)+1 种基金the Guangxi Innovation-Driven Development Project(AA18242042-1)the Fundamental Research Funds for the Central Universities (FRF-TP-18-020A3)。
文摘The recycling of waste printed circuit board(WPCBs) is of great significance for saving resources and protecting the environment. In this study, the WPCBs were pyrolyzed by microwave and the contained valuable metals Cu, Sn and Pb were recovered from the pyrolyzed WPCBs. The effect of pyrolysis temperature and time on the recovery efficiency of valuable metals was investigated. Additionally, the characterization for morphology and surface elemental distribution of pyrolysis residues was carried out to investigate the pyrolysis mechanism. The plastic fiber boards turned into black carbides, and they can be easily separated from the metals by manual. The results indicate that 91.2%, 96.1% and 94.4% of Cu, Sn and Pb can be recovered after microwave pyrolysis at 700 °C for 60 minutes. After pyrolysis, about 79.8%(mass)solid products, 11.9%(mass) oil and 8.3%(mass) gas were produced. These gas and oil can be used as fuel and raw materials of organic chemicals, respectively. This process provides an efficient and energy-saving technology for recovering valuable metals from WPCBs.
基金financially supported by the National Natural Science Foundation of China(No.52173246)the 111 Project(B13013).
文摘The number of lithium-ion batteries(LIBs)is steadily increasing in order to meet the ever-growing demand for sustainable energy and a high quality of life for humankind.At the same time,the resulting large number of LIB waste certainly poses safety hazards if it is not properly disposed of and will seriously harm the environment due to its inherent toxicity due to the use of toxic substances.Moreover,the consumption of many scarce precious metal resources is behind the mass production of batteries.In the light of severe environmental,resources,safety and recycling problems,recycling spent LIBs have become an essential urgently needed action to achieve sustainable social development.This review therefore critically analyses the value and the need for recycling of spent LIBs from a variety of resources and the environment.A range of existing technologies for recycling and reusing spent LIBs,such as pretreatment,pyrometallurgy,hydrometallurgy,and direct recycled methods,is subsequently summarized exclusively.In addition,the benefits and problems of the methods described above are analyzed in detail.It also introduces recycling progress of other LIB components,such as anodes,separators,and electrolytes,as well as the high-value cathode.Finally,the prospects for recycling LIBs are addressed in four ways(government,users,battery manufacturers,and recyclers).This review should contribute to the development of the recycling of used LIBs,particularly in support of industrialization and recycling processes.
文摘In order to improve the refining effect of zinc ore and promote the development of this industry,taking the hydrometallurgical zinc smelting process as an example,this paper first establishes a model for the recycling of waste residues in the hydrometallurgical process,proposes optimization measures based on proven comprehensive recycling technology for purifying residues to obtain higher valuable metal recovery rate,and provides reference for those in relevant fields.
基金financially supported by National Key Research and Development Program of China(Grant No.2020YFC1909703)S&T Program of Hebei(Grant Nos.20373808D and 206Z4401G)+1 种基金Fangchenggang Key R&D Program Grant No.AB20014008National Natural Science Foundation of China(Grant No.52074256)
文摘Hydrodesulfurization(HDS)catalysts are widely used in petrochemical industries,playing a crucial role in desulfurization process to get high-quality oil.The generation of Al-based spent HDS catalyst is estimated to be 1.2×105 tons per year around the world.The spent HDS catalysts have been regarded as an important secondary resource due to their abundant output,considerable metal value,and regeneration potential;however,if improperly handled,it would severely pollute the environment due to high content of heavy metals.Thus,the recovery of valuable metals from spent HDS catalysts is of great importance from both resource utilization and environmental protection points of view.In this work,recent advances in the spent HDS catalyst treatment technologies have been reviewed,focusing on the recovery of valuable transition metals and environmental impacts.Finally,typical commercial processes have been discussed,providing in-depth information for peer researchers to facilitate their future research work in designing more effective and environmentally friendly recycling processes.
基金This study was financially supported by Project of National Natural Science Foundation of China(Grant Nos.51774215,51474162,and 51774216)Project of Hubei Province Science Foundation of China(No.2018CFA068).
文摘High-manganese containing vanadium waste-water(HMVW)is commonly produced during the vanadium extraction process from vanadium titano-magnetite.HMVW cannot be reused and discharged directly,and is harmful to the environment and affect product quality due to heavy metals in the wastewater.The wastewater is usually treated by lime neutralization,but valuable metals(especially V and Mn)cannot be recovered.In this study,an efficient and environmentally friendly method was developed to recover valuable metals by using a solvent extraction-precipitation process.In the solvent extraction process,98.15%of vanadium was recovered,and the V2Os product,with a purity of 98.60%,was obtained under optimal conditions.For the precipitation process,91.05%of manganese was recovered as MnCO3 which meets the III grade standard of HG/T 2836-2011.Thermodynamic simulation analysis indicated that MnCO3 was selectively precipitated at pH 6.5 while Mg and Ca could hardly be precipitated.The results of X-ray diffraction and scanning electron microscopy demonstrated that the obtained V2Os and MnCO3 displayed a good degree of crystallinity.The treated wastewater can be returned for leaching,and resources(V and Mn)in the wastewater were utilized efficiently in an environmentally friendly way.Therefore,this study provides a novel method for the coextraction of V and Mn from HMVW.
