Effects of film-forming additive on stability of electrode and cycling performance of LiFePO4/graphite cell at elevated temperature were studied. Two 18650 cells with and without VC additive were investigated by galva...Effects of film-forming additive on stability of electrode and cycling performance of LiFePO4/graphite cell at elevated temperature were studied. Two 18650 cells with and without VC additive were investigated by galvanostatic cycling, electrochemical impedance spectroscopy, scanning electron microscopy, energy-dispersive X-ray analysis and Raman spectroscopy. The results show that in the presence of VC additive, dissolution of Fe from LiFePO4 material is greatly depressed and stability of graphite structure is improved; the additive can not only reduce reaction of electrolyte on surface of LiFePO4 electrode but also suppress reduction of solvent and thickening of the solid electrolyte interface （SEI） layer on graphite surface. Electrolyte with VC is considered to be a good candidate for improving cycling performance of the LiFePOa/graphite cell at elevated temperature.展开更多
Application of sodium-ion batteries is suppressed due to the lack of appropriate electrolytes matching cathode and anode simultaneously.Ether-based electrolytes,preference of anode materials,cannot match with high-pot...Application of sodium-ion batteries is suppressed due to the lack of appropriate electrolytes matching cathode and anode simultaneously.Ether-based electrolytes,preference of anode materials,cannot match with high-potential cathodes failing to apply in full cells.Herein,vinylene carbonate(VC)as an additive into NaCF_(3) SO_(3)-Diglyme(DGM)could make sodium-ion full cells applicable without preactivation of cathode and anode.The assembled FeS@C||Na3 V2(PO_(4))_(3)@C full cell with this electrolyte exhibits long term cycling stability and high capacity retention.The deduced reason is additive VC,whose HOMO level value is close to that of DGM,not only change the solvent sheath structure of Na^(+),but also is synergistically oxidized with DGM to form integrity and consecutive cathode electrolyte interphase on Na3 V2(PO_(4))_(3)@C cathode,which could effectively improve the oxidative stability of electrolyte and prevent the electrolyte decomposition.This work displays a new way to optimize the sodium-ion full cell seasily with bright practical application potential.展开更多
Ionic liquids have been paid much attention and are considered to replace the conventional organic electrolyte and solve the safety issues by virtue of nonvolatility,non-flammability,high ionic conductivity and extend...Ionic liquids have been paid much attention and are considered to replace the conventional organic electrolyte and solve the safety issues by virtue of nonvolatility,non-flammability,high ionic conductivity and extended electrochemical steady window.The paper introduces ionic liquids electrolyte on basis of 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (EMITFSI),which shows a wide electrochemical window (0.5-4.5 V vs.Li+/Li),and is theoretically feasible as an electrolyte for Li/LiFePO4batteries to improve the safety.Linear sweep voltammetry (LSV) was performed to investigate the electrochemical stability window of the polymer electrolyte.Interfacial resistance for Li/electrolyte/Li symmetric cells and Li/electrolyte/LiFePO4 cells were studied by electrochemical impedance spectroscopy (EIS).The results showed that additive vinylene carbonate (VC) enhances the formation of solid electrolyte interphase film to protect lithium anodes from corrosion and improves the compatibility of ionic liquid electrolyte towards lithium anodes.Accordingly,Li/LiFePO4cells delivers the initial discharge capacity of 124 mAh g-1 at a current rate of 0.1C in the ionic liquid electrolyte (EMITFSI+0.8 mol L-1LiTFSI+5 wt%VC),and shows better cyclability than in the ionic liquid electrolyte without VC.展开更多
Methacrylic acid first was neutralized with an aqueous solution of NaOH to pH = 6.0 similar to 7.0, vinylene carbonate (VCA) was added to the solution, then monomers were copolymerized in paraffin oil by means of reve...Methacrylic acid first was neutralized with an aqueous solution of NaOH to pH = 6.0 similar to 7.0, vinylene carbonate (VCA) was added to the solution, then monomers were copolymerized in paraffin oil by means of reverse-phase suspension polymerization and hydrophilic copolymeric supports were prepared. The properties of the supports were determined using trypsin and results show that the amount of enzymes coupled to the supports and the specific activity of immobilized trypsin are related to the content of VCA structure units, reaction time and concentration of enzyme solution, etc.展开更多
Bulk polymerization of vinylene carbonate using t-butylperoxypivalate at 40℃gave colourless, high molecular weight poly(vinylene carbonate) (PVCA). Solutions of PVCA in acetone and DMF are not stable at 25℃and this ...Bulk polymerization of vinylene carbonate using t-butylperoxypivalate at 40℃gave colourless, high molecular weight poly(vinylene carbonate) (PVCA). Solutions of PVCA in acetone and DMF are not stable at 25℃and this degradation was studied. From measurements in DMF with unfractionated PVCA a Mark-Houwink equation was obtained:展开更多
基金Project(2007BAE12B01)supported by the National Key Technology Research and Development Program of ChinaProject(20803095)supported by the National Natural Science Foundation of China
文摘Effects of film-forming additive on stability of electrode and cycling performance of LiFePO4/graphite cell at elevated temperature were studied. Two 18650 cells with and without VC additive were investigated by galvanostatic cycling, electrochemical impedance spectroscopy, scanning electron microscopy, energy-dispersive X-ray analysis and Raman spectroscopy. The results show that in the presence of VC additive, dissolution of Fe from LiFePO4 material is greatly depressed and stability of graphite structure is improved; the additive can not only reduce reaction of electrolyte on surface of LiFePO4 electrode but also suppress reduction of solvent and thickening of the solid electrolyte interface （SEI） layer on graphite surface. Electrolyte with VC is considered to be a good candidate for improving cycling performance of the LiFePOa/graphite cell at elevated temperature.
基金supported by the National Natural Science Foundation of China(Nos.U1804129,21771164,21671205,U1804126)Zhongyuan Youth Talent Support Program of Henan ProvinceZhengzhou University Youth Innovation Program。
文摘Application of sodium-ion batteries is suppressed due to the lack of appropriate electrolytes matching cathode and anode simultaneously.Ether-based electrolytes,preference of anode materials,cannot match with high-potential cathodes failing to apply in full cells.Herein,vinylene carbonate(VC)as an additive into NaCF_(3) SO_(3)-Diglyme(DGM)could make sodium-ion full cells applicable without preactivation of cathode and anode.The assembled FeS@C||Na3 V2(PO_(4))_(3)@C full cell with this electrolyte exhibits long term cycling stability and high capacity retention.The deduced reason is additive VC,whose HOMO level value is close to that of DGM,not only change the solvent sheath structure of Na^(+),but also is synergistically oxidized with DGM to form integrity and consecutive cathode electrolyte interphase on Na3 V2(PO_(4))_(3)@C cathode,which could effectively improve the oxidative stability of electrolyte and prevent the electrolyte decomposition.This work displays a new way to optimize the sodium-ion full cell seasily with bright practical application potential.
基金Sponsored by the Natural Science Foundation of Heilongjiang Province of China (Grant No.B2007-05)the Natural Scientific Research Innovation Foundation in Harbin Institute of Technology (Grant No.HIT.NSRIF.2009121)
文摘Ionic liquids have been paid much attention and are considered to replace the conventional organic electrolyte and solve the safety issues by virtue of nonvolatility,non-flammability,high ionic conductivity and extended electrochemical steady window.The paper introduces ionic liquids electrolyte on basis of 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (EMITFSI),which shows a wide electrochemical window (0.5-4.5 V vs.Li+/Li),and is theoretically feasible as an electrolyte for Li/LiFePO4batteries to improve the safety.Linear sweep voltammetry (LSV) was performed to investigate the electrochemical stability window of the polymer electrolyte.Interfacial resistance for Li/electrolyte/Li symmetric cells and Li/electrolyte/LiFePO4 cells were studied by electrochemical impedance spectroscopy (EIS).The results showed that additive vinylene carbonate (VC) enhances the formation of solid electrolyte interphase film to protect lithium anodes from corrosion and improves the compatibility of ionic liquid electrolyte towards lithium anodes.Accordingly,Li/LiFePO4cells delivers the initial discharge capacity of 124 mAh g-1 at a current rate of 0.1C in the ionic liquid electrolyte (EMITFSI+0.8 mol L-1LiTFSI+5 wt%VC),and shows better cyclability than in the ionic liquid electrolyte without VC.
文摘Methacrylic acid first was neutralized with an aqueous solution of NaOH to pH = 6.0 similar to 7.0, vinylene carbonate (VCA) was added to the solution, then monomers were copolymerized in paraffin oil by means of reverse-phase suspension polymerization and hydrophilic copolymeric supports were prepared. The properties of the supports were determined using trypsin and results show that the amount of enzymes coupled to the supports and the specific activity of immobilized trypsin are related to the content of VCA structure units, reaction time and concentration of enzyme solution, etc.
文摘Bulk polymerization of vinylene carbonate using t-butylperoxypivalate at 40℃gave colourless, high molecular weight poly(vinylene carbonate) (PVCA). Solutions of PVCA in acetone and DMF are not stable at 25℃and this degradation was studied. From measurements in DMF with unfractionated PVCA a Mark-Houwink equation was obtained:
