Utilizing oil extracted from waste engine oil and waste plastics, by pyrolysis, as a filel for internal combustion engines has been demonstrated to be one of the best available waste management methods. Separate blend...Utilizing oil extracted from waste engine oil and waste plastics, by pyrolysis, as a filel for internal combustion engines has been demonstrated to be one of the best available waste management methods. Separate blends of fuel from waste engine oil and waste plastic oil was prepared by mixing with diesel and experimental investigation is conducted to study engine performance, combustion and exhaust emissions. It is observed that carbon monoxide （CO） emission increases by 50% for 50% waste plastic oil （50WPO：50D） and by 58% for 50% waste engine oil （50WEO：50D） at full load as compared to diesel. Unburnt hydrocarbon （HC） emission increases by 16% for 50WPO：50D and by 32% for 50WEO：50D as compared to diesel at maximum load. Smoke is fotmd to decrease at all loading conditions for 50WPO：50D operation, but it is comparatively higher for 50WEO：50D operation. 50WPO：50D operation shows higher brake thermal efficiency for all loads as compared to 50WEO：50D and diesel fuel operation. Exhaust gas temperature is higher at all loads tbr 50WPO：50D and 50WEO：50D as compared to diesel fuel operation.展开更多
The physical performance of recycled asphalt was used as the main evaluation index to study the optimal range of a self-made rejuvenator.Through the penetration,viscosity and gel permeation chromatography(GPC)tests,th...The physical performance of recycled asphalt was used as the main evaluation index to study the optimal range of a self-made rejuvenator.Through the penetration,viscosity and gel permeation chromatography(GPC)tests,the diffusion degree of the rejuvenator under different temperatures and time process was analyzed,and the diffusion efficiency of the rejuvenator was evaluated from the macro and micro perspective.The regeneration mechanism of the rejuvenator in the aged asphalt was also analyzed using the Fourier transform infrared spectroscopy(FTIR),scanning electron microscope(SEM)and chemical composition tests.The research results showed that the optimum rejuvenator content was about 3%.Higher temperature and longer time were beneficial to improving the permeability and diffusion of the rejuvenator.During the aging process,the light components were reduced,and more macromolecular asphaltenes were generated as well as a large number of carbonyl and sulfoxide.After diffusion and regeneration,the light components in the asphalt were supplemented,the wrinkles and gullies of the aged asphalt were almost improved to the surface state of the matrix asphalt.展开更多
文摘Utilizing oil extracted from waste engine oil and waste plastics, by pyrolysis, as a filel for internal combustion engines has been demonstrated to be one of the best available waste management methods. Separate blends of fuel from waste engine oil and waste plastic oil was prepared by mixing with diesel and experimental investigation is conducted to study engine performance, combustion and exhaust emissions. It is observed that carbon monoxide （CO） emission increases by 50% for 50% waste plastic oil （50WPO：50D） and by 58% for 50% waste engine oil （50WEO：50D） at full load as compared to diesel. Unburnt hydrocarbon （HC） emission increases by 16% for 50WPO：50D and by 32% for 50WEO：50D as compared to diesel at maximum load. Smoke is fotmd to decrease at all loading conditions for 50WPO：50D operation, but it is comparatively higher for 50WEO：50D operation. 50WPO：50D operation shows higher brake thermal efficiency for all loads as compared to 50WEO：50D and diesel fuel operation. Exhaust gas temperature is higher at all loads tbr 50WPO：50D and 50WEO：50D as compared to diesel fuel operation.
基金Funded by the Science and Technology Project of Henan Department of Transportation(No.2020J-2-3)Shaanxi Transportation Science and Technology Project(Nos.17-05K,19-10K,19-28K)。
文摘The physical performance of recycled asphalt was used as the main evaluation index to study the optimal range of a self-made rejuvenator.Through the penetration,viscosity and gel permeation chromatography(GPC)tests,the diffusion degree of the rejuvenator under different temperatures and time process was analyzed,and the diffusion efficiency of the rejuvenator was evaluated from the macro and micro perspective.The regeneration mechanism of the rejuvenator in the aged asphalt was also analyzed using the Fourier transform infrared spectroscopy(FTIR),scanning electron microscope(SEM)and chemical composition tests.The research results showed that the optimum rejuvenator content was about 3%.Higher temperature and longer time were beneficial to improving the permeability and diffusion of the rejuvenator.During the aging process,the light components were reduced,and more macromolecular asphaltenes were generated as well as a large number of carbonyl and sulfoxide.After diffusion and regeneration,the light components in the asphalt were supplemented,the wrinkles and gullies of the aged asphalt were almost improved to the surface state of the matrix asphalt.
