Based on the principle of super-symmetric lens with quadratic phase gradient transformation, combined with the principle of digital coding of metasurface, we propose a wide-angle coded metalens for focusing control in...Based on the principle of super-symmetric lens with quadratic phase gradient transformation, combined with the principle of digital coding of metasurface, we propose a wide-angle coded metalens for focusing control in two-dimensional space. This metalens achieves focus shift in the x-direction by changing the oblique incidence angle of the incident wave,and focus control in the y-direction by combining with the convolution principle of the digitally coded metasurface to achieve flexible control of light focusing in the two-dimensional plane. The metasurface unit is mainly composed of threelayer of metal structure and two layers of medium, and the transmission phase is obtained by changing the middle layer of metal structure, which in turn obtains the required phase distribution of the metalens. The design of the metalens realizes the function of the lens with a large viewing angle at the x-polarized incidence, and realizes two-dimensional focus control. Experimentally, we prepared the designed coding metalens and tested the focus control function of the wide-angle coding metalens. The experimental results are in good agreement with the design results.展开更多
The South Yellow Sea basin is filled with Mesozoic-Cenozoic continental sediments overlying pre-Palaeozoic and Mesozoic-Palaeozoic marine sediments.Conventional multi-channel seismic data cannot describe the velocity ...The South Yellow Sea basin is filled with Mesozoic-Cenozoic continental sediments overlying pre-Palaeozoic and Mesozoic-Palaeozoic marine sediments.Conventional multi-channel seismic data cannot describe the velocity structure of the marine residual basin in detail,leading to the lack of a deeper understanding of the distribution and lithology owing to strong energy shielding on the top interface of marine sediments.In this study,we present seismic tomography data from ocean bottom seismographs that describe the NEE-trending velocity distributions of the basin.The results indicate that strong velocity variations occur at shallow crustal levels.Horizontal velocity bodies show good correlation with surface geological features,and multi-layer features exist in the vertical velocity framework(depth:0–10 km).The analyses of the velocity model,gravity data,magnetic data,multichannel seismic profiles,and drilling data showed that high-velocity anomalies(>6.5 km/s)of small(thickness:1–2 km)and large(thickness:>5 km)scales were caused by igneous complexes in the multi-layer structure,which were active during the Palaeogene.Possible locations of good Mesozoic and Palaeozoic marine strata are limited to the Central Uplift and the western part of the Northern Depression along the wide-angle ocean bottom seismograph array.Following the Indosinian movement,a strong compression existed in the Northern Depression during the extensional phase that caused the formation of folds in the middle of the survey line.This study is useful for reconstructing the regional tectonic evolution and delineating the distribution of the marine residual basin in the South Yellow Sea basin.展开更多
In order to deal with torque pulsation problem caused by traditional control method for brushless DC （BLDC） motor and to achieve high precision and good stability, a novel control strategy is proposed. Compared with...In order to deal with torque pulsation problem caused by traditional control method for brushless DC （BLDC） motor and to achieve high precision and good stability, a novel control strategy is proposed. Compared with the traditional control scheme, by using phase voltage as a control objective and making waveform of phase current approximately quasi-sinusoidal, torque ripple of BLDC motor is reduced from the original 14% to 3.4%, while toque is increased by 3.8%. Furthermore, by detecting zero-crossings of back electromotive force （BEMF） with non-conducting phases, sensorless control is realized. The new control strategy is simple. It can minimize torque ripple, increase torque, and realize sensorless control for BLDC motor. Simulation and experiments show good performance of BLDC motor by using the new control method.展开更多
The marginal sea and back-arc basins in the Western Pacific Ocean have become the focus of tectonics due to their unique tectonic location.To understand the deep crustal structure in the back-arc region,we present a 5...The marginal sea and back-arc basins in the Western Pacific Ocean have become the focus of tectonics due to their unique tectonic location.To understand the deep crustal structure in the back-arc region,we present a 545-kmlong active-source ocean bottom seismometer(OBS)wide-angle reflection/refraction profile in the East China Sea.The P wave velocity model shows that the Moho depth rises significantly,from approximately 30 km in the East China Sea shelf to approximately 16 km in the axis of the Okinawa Trough.The lower crustal high-velocity zone(HVZ)in the southern Okinawa Trough,with V_(p) of 6.8-7.3 km/s,is a remarkable manifestation of the mantle material upwelling and accretion to the lower crust.This confirms that the lower crustal high-velocity mantle accretion is developed in the southern Okinawa Trough.During the process of back-arc extension,the crustal structure of the southern Okinawa Trough is completely invaded and penetrated by the upper mantle material in the axis region.In some areas of the southern central graben,the crust may has broken up and entered the initial stage of seafloor spreading.The discontinuous HVZs in the lower crust in the back-arc region also indicate the migration of spreading centers in the back-arc region since the Cenozoic.The asthenosphere material upwelling in the continent-ocean transition zone is constantly driving the lithosphere eastward for episodic extension,and is causing evident tectonic migration in the Western Pacific back-arc region.展开更多
A 400 km-long wide-angle seismic experiment along Lianxian-Gangkou profile in South China was carried out to study contact relationship between southeast continental margin of Yangtze block and northwest continental m...A 400 km-long wide-angle seismic experiment along Lianxian-Gangkou profile in South China was carried out to study contact relationship between southeast continental margin of Yangtze block and northwest continental margin of Cathaysia block. We reconstructed crustal wide-angle reflection structure by the depth-domain pre-stack migration and the crustal velocity model constructed from the traveltime fitting. The wide-angle reflection section shows different reflection （from crystalline basement and Moho） pattern beneath the Yangtze and Cathaysia blocks, and suggests the Wuchuan-Sihui fault is the boundary between them. A cluster of well-developed reflections on Moho and in its underlying topmost mantle probably comes from alternative thin layers, which may be seismic signature of strong interaction between crust and mantle in the tectonic environment of lithosphere extension.展开更多
The studies of seismic tomography and wide-angle reflection have been carried out to reveal the velocity structUrebeneath the eastern Dabie orogenic belt. The result from the seismic tomography shows the high velocity...The studies of seismic tomography and wide-angle reflection have been carried out to reveal the velocity structUrebeneath the eastern Dabie orogenic belt. The result from the seismic tomography shows the high velocity bodiesmight be positioned to a depth of only about 1 .5 km below sea level within the Dabie ultra-high pressure metamorphic (UHPM) belt; the fan-profile shows the Shuihou-Wuhe fault, the demarcation between the South Dabieand the North Dabie, slopes to the south-west at a dip angle of about 45° in the bottom of upper crust. The wideangle reflection shows the middle crustal boundaries and the complex features from the lower crust.展开更多
AIM：To compare the effects of scleral buckling using wide-angle viewing systems（WAVS） with that using indirect ophthalmoscope for the treatment of rhegmatogenous retinal detachment.METHODS：The study was a retrospe...AIM：To compare the effects of scleral buckling using wide-angle viewing systems（WAVS） with that using indirect ophthalmoscope for the treatment of rhegmatogenous retinal detachment.METHODS：The study was a retrospective analyses of the medical records of 94 eyes（94 patients） with rhegmatogenous retinal detachment.Among them,47 eyes underwent scleral buckling using WAVS with endoiiluminator（Group W）,and 47 eyes underwent scleral buckling using indirect ophthalmoscope（Group I）.Surgical durations,primary success rate,best-corrected visual acuities（BCVA）,delayed subretinal fluid absorptions and surgical complications were compared between the two groups.RESULTS：At baseline,there were no statistical differences between the two groups in patient＇s age（P=0.997）,gender（P=0.853）,symptom duration（P=0.216）,BCVA（P=0.389）,refractive error（P=0.167）,intraocular pressure（P=0.595）,the number of retinal breaks（P=0.832）,the extent of retinal detachment（P =0.246）,subretinal demarcation line（P=0.801）,and macular detachment（P=0.811）.The follow-up period was 12 mo.The surgical durations in Group W（with or without encircling buckling） were significant shorter than those in Group I（P〈0.001 respectively）.The primary success rate was94.27%in Group W,which was similar to that in Group I（92.38%,P=0.931）.The BCVA in Group W was better than that in Group I（P〈0.001） at 1-month follow-up visit.However,there were no significant differences between the two groups at 3-month（P=0.221）,6-month（P =0.674）,and 12-month（P=0.363） follow-up visits respectively.Delayed subretinal fluid absorptions were more common in Group I than in Group W at 1-month（P=0.045） follow-up visit,but there were no significant differences between the two groups at 3-month（P=0.111）,6-month（P =1.000） and 12-month follow-up visits respectively.CONCLUSION：Scleral buckling using WAVS can be an alternative choose for rhegmatogenous retinal detachment展开更多
Polarity reversals may occur to transmitted P waves if the incidence angle is greater than the critical incidence angle. We analyze the characteristics of reflection and transmission coefficients under the condition o...Polarity reversals may occur to transmitted P waves if the incidence angle is greater than the critical incidence angle. We analyze the characteristics of reflection and transmission coefficients under the condition of wide incidence angle based on Zoeppritz equations. We find that for specific conditions, as the incidence angle increases, the characteristic curve of the transmitted P-wave coefficient enters the third quadrant from the first quadrant through the origin, which produces a transition in the transmitted P wave and the corresponding coefficient experiences polarity reversal. We derive the incidence angle when the transmitted P-wave coefficient is zero and verify that it equals zero by using finite-difference forward modeling for a single-interface model. We replace the water in the model reservoir by gas and see that the reservoir P-wave velocity and density decrease dramatically. By analyzing the synthetic seismogram of the transmitted P wave in the single-interface model, we show that the gas-saturated reservoir is responsible for polarity reversal.展开更多
Firstly,the relationship between the accuracy of low altitude aerial photogrammetry and the field angle of camera is made by a quantitative analysis from the theory.The conclusion that the low altitude photogrammetry ...Firstly,the relationship between the accuracy of low altitude aerial photogrammetry and the field angle of camera is made by a quantitative analysis from the theory.The conclusion that the low altitude photogrammetry should use wide-angle camera as much as possible is done.Then,the limitation of the single lens camera to expand field angle and the combined wide-angle camera existing on the market not suitable for light load of low altitude UAV(Unmanned Aerial Vehicle)due to excessive weight are pointed out.The characteristics of combined wide-angle low altitude light camera with self-calibration and self-stabilization developed by the author are described,especially the principle of self-calibration for the combination of static error and dynamic error.Based on the practice of large scale mapping,a technical procedure in aerial photography by taking with wide-angle camera and large overlap simultaneously for improving the accuracy of low altitude photogrammetry is proposed.The typical engineering produced data is used to verity the above theoretical analysis.A technical route for increasing accuracy of low altitude photogrammetry with combined wide-angle camera is expounded.展开更多
The design and fabrication of graded-refractive-index （GRIN） antireflection （AR） coatings with wide-angle and broadband characteristics are demonstrated. The optimization of the graded-index profiles with a geneti...The design and fabrication of graded-refractive-index （GRIN） antireflection （AR） coatings with wide-angle and broadband characteristics are demonstrated. The optimization of the graded-index profiles with a genetic algorithm is used in the design of the GRIN AR coatings. The average reflectance over a wavelength range from 400 nm to 800 nm and angles of incidence from 0° to 80° could be reduced to only 0.1% by applying an optimized AR coating onto BK7 glass. The optimization of step-graded GRIN AR coating is then further investigated in detail. A two-layer AR coating was deposited by electron beam evaporation with glancing angle deposition technology, and the positional homogeneity was improved by depositing the film from two opposite directions. The microstructure of the AR coating was investigated by scanning electron microscopy, and the residual reflectances of the coating sample are in agreement with theoretical calculations. The optimized GRIN AR coatings are beneficial to increasing the efficiency of light utilization.展开更多
For potential military applications, a flexible metamaterial absorber(MMA) working on whole K-bands with totalthickness of 3.367 mm, ultra-broadband, polarization-insensitive, and wide-angle stability is presented bas...For potential military applications, a flexible metamaterial absorber(MMA) working on whole K-bands with totalthickness of 3.367 mm, ultra-broadband, polarization-insensitive, and wide-angle stability is presented based on frequencyselective surface(FSS). The absorber is composed of polyvinyl chloride(PVC) layer, polyimide(PI) layer, and poly tetra fluoro ethylene(PTFE) layer, with a sandwich structure of PVC–PI–PTFE–metal plate. Periodic conductive patterns play a crucial role in the absorber, and in traditional, it is designed on the upper surface of PI layer to form LC resonance. Different from commonly absorber, all the patterns are located on the lower surface of the PI layer in this work, and hence the impedance matching and absorptivity are improved in this purposed absorber. The flexible absorber with patterns on lower surface of the PI layer is compared with that on upper surface of the PI layer, the difference and the reasons are explained by absorption mechanism based on equivalent circuit model, and surface current density and electric field distribution are used to analyze resonance peaks. Absorptivity is greater than 90% in a frequency range of 10.47 GHz–45.44 GHz with relative bandwidth of 125.1%, covering the whole Ku, K, Ka, and some of X, U bands, especially containing the whole K bands from 12 GHz to 40 GHz. Radar cross section(RCS) is reduced at least 10 dB in 11.48 GHz–43.87 GHz frequency ranges,and absorption remained about 90% when the incident angle changed from 0°to 55°. The purposed absorber is fabricated,measured, and experiment results show good agreement with theoretical analysis and numerical simulation. After bonded on outer surface of different cylinders with diameters of 200 mm and 100 mm, the absorption of MMA is approximately reduced 10% and 20% respectively, which shows good conformal character with surface of various curvatures. Due to the attractive performance on strong absorption in the whole K-bands, flexible and easy conformal, our design exhibits broad potential application in radar stealth and sensors.展开更多
Metalenses are essential components in terahertz imaging systems.However,without careful design,they show limited field of view and their practical applications are hindered.Here,a wide-angle metalens is proposed whos...Metalenses are essential components in terahertz imaging systems.However,without careful design,they show limited field of view and their practical applications are hindered.Here,a wide-angle metalens is proposed whose structure is optimized for focusing within the incident angles of±25°.Simulation and experiment results show that the focusing efficiency,spot size,and modulation transfer function of this lens are not sensitive to the incident angle.More importantly,this wide-angle metalens follows the ideal Gaussian formula for the object-image relation,which ensures a wider field of view and better contrast in the imaging experiment.展开更多
The wide-angle seismic profile between Menglian and Malong crosses the Baoshan block (Gondwana-typed), and Simao and southwestern Yangtze blocks (Yangtze-typed). By in-terpreting the wide-angle seismic data, we obtain...The wide-angle seismic profile between Menglian and Malong crosses the Baoshan block (Gondwana-typed), and Simao and southwestern Yangtze blocks (Yangtze-typed). By in-terpreting the wide-angle seismic data, we obtained the seismic crust/upper mantle structure of P-wave velocities together with the seismic reflections of these three blocks, Changning- Menglian and Mojiang suture zones among the mentioned three blocks. Our interpreting results demonstrate that the P-wave crustal velocity of Simao block is slower than that of Baoshan and southwestern Yangtze block and the crustal thickness gradually thickens from the Baoshan block, Simao to southwestern Yangtze block. Crustal reflection patterns of these three blocks have dis-tinct differences too. For the Gondwana-typed blocks, seismic reflections in the upper crust are well developed while in middle-lower crust they are very weak. The crustal reflections in the Yangtze block are very well developed. The crustal reflection patterns in Simao and southwest-ern Yangtze blocks are distinguishable. The average thickness of the crust in the studied area is about 40 km. And we make some discussions on the crustal thickening model of the three blocks in western Yunnan and tectonic setting of seismic developing and interaction of Gondwana and Yangtze blocks.展开更多
We recognized 6 sets of reflecting P- and S-wave events from Moho and other interfaces within the crust, respectively, with the wide-angle seismic data acquired from 510 km-long Selincuo-Ya'anduo profile in the no...We recognized 6 sets of reflecting P- and S-wave events from Moho and other interfaces within the crust, respectively, with the wide-angle seismic data acquired from 510 km-long Selincuo-Ya'anduo profile in the northern Tibet, fitted the observed events with forward modeling, and interpreted crustal structure of P- and S-wave velocities and Poisson's ratio under the profile. The results demonstrate that the crustal structure between Yarlungzangbo and Bangong-Nujiang sutures changes abruptly, and the crust is the thickest at the middle part of the profile with thickness of 80 km or more. The 'down-bowing' Moho is the striking feature for the crustal variation along the west-east direction. The Moho uplifts with steps, and the uplifting rate westward is greater than that eastward. The heterogeneity of P- and S-wave velocities exists both vertically and horizontally, and one lower velocity layer (LVL) exists with the depth range of 27-34 km and the thickness range of 5-7 km. For the upper crust, Poisson's ratio is the lowest at the middle part of the profile; for the lower crust, the Poisson's ratio at the east segment is lower than that at west segment, which means that the crustal rigidity for the upper crust is different from the lower crust, and the lower crust under the east segment of the profile is more ductile. We infer that the substance in the lower crust endured eastward flow along with the collision between Eurasian and Indian plates, and the 'down-bowing' Moho is attributable to the multi-phase E-W tectonic processes.展开更多
The crustal structure of the northwestern sub-basin area of the South China Sea was modeled by inverting a wide-angle seismic survey line across the entire region and on both sides of its bounding continental margins....The crustal structure of the northwestern sub-basin area of the South China Sea was modeled by inverting a wide-angle seismic survey line across the entire region and on both sides of its bounding continental margins. The survey line extended over 484 km. A total of 14 Ocean Bottom Seismometers (OBS) were deployed at intervals of 30 km to record air-gun array sources with a combined volume of 5160 in 3 . The crustal velocity structure of the northwestern sub-basin area was acquired through the integration of multi-channel seismic data. OBS data were processed and modeled initially using ray tracing inversion techniques. Results indicate that crustal thickness under the continental slope decreases from 21 to 11 km, crustal thickness of the northwestern sub-basin is 7.7 km, and the depth to the Moho ascends from 21 km under the upper continental slope to 11 km under the middle basin. The crust of the northwestern sub-basin is similar to that of the eastern sub-basin in its oceanic crustal structure. This structure has a thicker layer 1 (sedimentary layer) and a thinner layer 2. These characteristics are especially clear in the eastern sub-basin, which differs somewhat from typical oceanic crust. The tectonic geometry and velocity structure of the northwestern sub-basin and its margins comprise a symmetrical conjugate and indicate a pure shear mode with regard to the continental margin rifting mechanism. We did not find clear seismic signals from high velocity layers under the lower crust of the continental margin in the northern part of the northwestern sub-basin, which provides new evidence for the idea that the western part of the northern continental margin of the South China Sea constitutes nonvolcanic crust. Because the seafloor spreading period of the northwestern sub-basin was short, layer 2 might have experienced asymmetrical basalt magma flows, which may have blurred the magnetic anomaly lineations of the northwestern sub-basin.展开更多
The Fuzhou basin and its vicinities are located at the northern end of the southeastern coastal seismic zone of the mainland of China. By the joint explorations of high-resolution seismic refraction and wide-angle ref...The Fuzhou basin and its vicinities are located at the northern end of the southeastern coastal seismic zone of the mainland of China. By the joint explorations of high-resolution seismic refraction and wide-angle reflection/refraction as well as deep seismic reflection in the region, which is the first synthetic profile in China, its fine velocity structure and geometric structure from the ground to Moho discontinuity is obtained. The result shows that the crust is obviously layered with a thickness of about 32 km. Basically, it consists of two parts: upper crust and lower crust. The velocity of the upper crust is 5.9-6.2 km/s in which there is a 3-4-km-thick weak low-velocity layer between the depths of 10-15 km, while the velocity of the lower crust in the range of 6.3-7.2 km/s. There exists a strong velocity gradient layer about 3 km thick above the Moho discontinuity whose velocity increases from 6.5 to 7.27 km/s. There exist high-angle normal faults that are small in size and extend only in the shallow crust. These faults are the secondary developed on the hanging wall of westward dipping low-angle normal faults. Thus, their seismogenic ability is limited, however, there exists a high-angle deep fault in the crust from Changle-Zaoan fault zone to seashore fault zone. This deep fault has cut the interface between the upper and lower crusts and Moho discontinuity, and may be the deep structure to trigger destructive earthquake source in future to affect Fuzhou City. These results have advanced the detecting precision of the deep structure in the southeastern coastal seismic zone of the mainland of China. In the aspect of the combined feature of the deep and shallow extensional structures that consist of the westward dipping low-angle normal faults and secondary normal faults on their hanging walls in the upper crust, it is firstly obtained that a united structural interpretation has deepened the knowledge about the deep dynamic process in the southeastern coastal seismic zone. At the same time, in synthetic application of deep seismic detecting methods for deep tectonic background, it possesses a wide referenced meaning to the other regions.展开更多
The seawater column is typically taken as a homogeneous velocity layer in wide-angle crustal seismic surveys in marine environments. However, heterogeneities in salinity and temperature throughout the seawater layer r...The seawater column is typically taken as a homogeneous velocity layer in wide-angle crustal seismic surveys in marine environments. However, heterogeneities in salinity and temperature throughout the seawater layer result insignificant lateral variations in its seismic velocity, especially in deep marine environments. Failure to compensate for these velocity inhomogeneities will introduce significant artifacts in constructing crustal velocity models using seismic tomography. In this study, we conduct numerical experiments to investigate the impact of heterogeneous seismic velocities in seawater on tomographic inversion for crustal velocity models. Experiments that include lateral variation in seawater velocity demonstrated that the modeled crustal velocities were contaminated by artifacts from tomographic inversions when assuming a homogeneous water layer. To suppress such artifacts, we propose two strategies：（1） simultaneous inversion of water velocities and the crustal velocities;（2） layer-stripping inversion during which to first invert for seawater velocity and then correct the travel times before inverting for crustal velocities. The layer-stripping inversion significantly improves the modeling of variation in seawater velocity when preformed with seismic sensors deployed on the ocean bottom and in the water column. Such strategies improve crustal modeling via wide-angle seismic surveys in deep-marine environment.展开更多
A key limitation in the observation of instruments used in operations and heart sutures during a procedure is the scattering and absorption during optical imaging in the presence of blood.Therefore,we propose a novel ...A key limitation in the observation of instruments used in operations and heart sutures during a procedure is the scattering and absorption during optical imaging in the presence of blood.Therefore,we propose a novel real-time fiber-optic infrared imaging system simultaneously capturing a flexible wide field of view(FOV) and large depth of field infrared image in real time.The assessment criteria for imaging quality of the objective and coupling lens have been optimized and evaluated.Furthermore,the feasibility of manufacturing and assembly has been demonstrated with tolerance sensitivity and the Monte Carlo analysis.The simulated results show that the optical system can achieve a large working distance of 8 to25 mm,a wide FOV of 120°,and the relative illuminance is over 0.98 in the overall FOV.To achieve high imaging quality in the proposed system,the modulation transfer function is over 0.661 at 16.7 Ip/mm for a 320×256 short wavelength infrared camera sensor with a pixel size of 30 μm.展开更多
To investigate the geodynamic processes of Mesozoic large-scale mineralization in South China,we deployed a 350-km-long,wide-angle seismic reflection/refraction sounding profile between Yingshan in Hubei and Changshan...To investigate the geodynamic processes of Mesozoic large-scale mineralization in South China,we deployed a 350-km-long,wide-angle seismic reflection/refraction sounding profile between Yingshan in Hubei and Changshan in Zhejiang.This profile traverses the Cu-Au metallogenic belt in the middle and lower reaches of the Yangtze River(YMB),the Jiangnan W-polymetal metallogenic belt(JNMB),and the Qinhang Cu-polymetal metallogenic belt(QHMB).Our imaging results reveal various interesting velocity features along the profile.(1)The velocity structure is characterized by vertical layering and horizontal blocking;(2)the YMB is marked by high velocity and high V_(p)/V_(s) ratios in general with a significantly uplifted Moho interface and a thin crust of~31 km,and the lower crust contains high-velocity anomalies and has the characteristics of a crustmantle transition zone;(3)the JNMB is bounded by the Jiangnan fault and Jingdezhen-Huangshan fault and has low-velocity anomalies and low V_(p)/V_(s) ratios;and(4)the QHMB is characterized by high-velocity anomalies and high V_(p)/V_(s) ratios.The highvelocity anomalies in the YMB and QHMB represent relatively Cu-Au-rich mafic juvenile lower crust.The formation of this kind of crust is considered to be related to mantle-derived magma underplating or residues of Neoproterozoic oceanic crustal materials,and it also provided sources for large-scale Cu-Au mineralization in the Mesozoic.The JNMB has features similar to those of ancient crusts enriched in W-Sn,the partial melting of which played a leading role in the formation of the superlarge W deposits in this belt.Considering these results and other regional geological data,we propose that a large-scale oblique upwelling of the asthenosphere along the collisional belt of the Yangtze and Cathaysia blocks during the Mesozoic was the deep driving mechanism for the explosive mineralization of Cu,Au,and W in northeastern South China.The boundaries of the blocks or terrains and discontinuities of the lithosphere were the main channels for deep heat and magmas and therefore controlled the spatial distribution of the metallogenic belt.展开更多
The partial derivative equations of Zoeppritz equations are established and the derivatives of each matrix entry with respect to wave vectors are derived in this paper.By solving the partial derivative equations we ob...The partial derivative equations of Zoeppritz equations are established and the derivatives of each matrix entry with respect to wave vectors are derived in this paper.By solving the partial derivative equations we obtained the partial derivatives of seismic wave reflection coefficients with respect to wave vectors,and computed the Goos-Hnchen shift for reflected P-and VS-waves.By plotting the curves of Goos-Hnchen shift,we gained some new insight into the lateral shift of seismic reflection wave.The lateral shifts are very large for glancing wave or the wave of the incidence angle near the critical angle,meaning that the seismic wave propagates a long distance along the reflection interface before returning to the first medium.For the reflection waves of incidence angles away from the critical angle,the lateral shift is in the same order of magnitude as the wavelength.The lateral shift varies significantly with different reflection interfaces.For example,the reflected P-wave has a negative shift at the reflection interface between mudstone and sandstone.The reflected VS-wave has a large lateral shift at or near the critical angle.The lateral shift of the reflected VS-wave tends to be zero when the incidence angle approaches 90°.These observations suggest that Goos-Hnchen effect has a great influence on the reflection wave of wide-angles.The correction for the error caused by Goos-Hnchen effect,therefore,should be made before seismic data processing,such as the depth migration and the normal-moveout correction.With the theoretical foundation established in this paper,we can further study the correction of Goos-Hnchen effect for the reflection wave of large incidence angle.展开更多
基金supported in part by the Science and technology innovation leading talent project of special support plan for high-level talents in Zhejiang Province(2021R52032)Natural Science Foundation of Zhejiang Province under grant No.LY22F050001+1 种基金Special project for professional degree postgraduates of Zhejiang Provincial Education Department(No.Y202353663,Y202353686)in part by the National Natural Science Foundation of China under grant No.62175224.China Jiliang University Basic Research Expenses.
文摘Based on the principle of super-symmetric lens with quadratic phase gradient transformation, combined with the principle of digital coding of metasurface, we propose a wide-angle coded metalens for focusing control in two-dimensional space. This metalens achieves focus shift in the x-direction by changing the oblique incidence angle of the incident wave,and focus control in the y-direction by combining with the convolution principle of the digitally coded metasurface to achieve flexible control of light focusing in the two-dimensional plane. The metasurface unit is mainly composed of threelayer of metal structure and two layers of medium, and the transmission phase is obtained by changing the middle layer of metal structure, which in turn obtains the required phase distribution of the metalens. The design of the metalens realizes the function of the lens with a large viewing angle at the x-polarized incidence, and realizes two-dimensional focus control. Experimentally, we prepared the designed coding metalens and tested the focus control function of the wide-angle coding metalens. The experimental results are in good agreement with the design results.
基金The National Natural Science Foundation of China under contract No.41806048the Open Fund of the Hubei Key Laboratory of Marine Geological Resources under contract No.MGR202009+2 种基金the Fund from the Key Laboratory of Deep-Earth Dynamics of Ministry of Natural Resource,Institute of Geology,Chinese Academy of Geological Sciences under contract No.J1901-16the Aoshan Science and Technology Innovation Project of Pilot National Laboratory for Marine Science and Technology(Qingdao)under contract No.2015ASKJ03-Seabed Resourcesthe Fund from the Korea Institute of Ocean Science and Technology(KIOST)under contract No.PE99741.
文摘The South Yellow Sea basin is filled with Mesozoic-Cenozoic continental sediments overlying pre-Palaeozoic and Mesozoic-Palaeozoic marine sediments.Conventional multi-channel seismic data cannot describe the velocity structure of the marine residual basin in detail,leading to the lack of a deeper understanding of the distribution and lithology owing to strong energy shielding on the top interface of marine sediments.In this study,we present seismic tomography data from ocean bottom seismographs that describe the NEE-trending velocity distributions of the basin.The results indicate that strong velocity variations occur at shallow crustal levels.Horizontal velocity bodies show good correlation with surface geological features,and multi-layer features exist in the vertical velocity framework(depth:0–10 km).The analyses of the velocity model,gravity data,magnetic data,multichannel seismic profiles,and drilling data showed that high-velocity anomalies(>6.5 km/s)of small(thickness:1–2 km)and large(thickness:>5 km)scales were caused by igneous complexes in the multi-layer structure,which were active during the Palaeogene.Possible locations of good Mesozoic and Palaeozoic marine strata are limited to the Central Uplift and the western part of the Northern Depression along the wide-angle ocean bottom seismograph array.Following the Indosinian movement,a strong compression existed in the Northern Depression during the extensional phase that caused the formation of folds in the middle of the survey line.This study is useful for reconstructing the regional tectonic evolution and delineating the distribution of the marine residual basin in the South Yellow Sea basin.
基金Project supported by the Shanghai Leading Academic Discipline Project (Grant No.T0103)
文摘In order to deal with torque pulsation problem caused by traditional control method for brushless DC （BLDC） motor and to achieve high precision and good stability, a novel control strategy is proposed. Compared with the traditional control scheme, by using phase voltage as a control objective and making waveform of phase current approximately quasi-sinusoidal, torque ripple of BLDC motor is reduced from the original 14% to 3.4%, while toque is increased by 3.8%. Furthermore, by detecting zero-crossings of back electromotive force （BEMF） with non-conducting phases, sensorless control is realized. The new control strategy is simple. It can minimize torque ripple, increase torque, and realize sensorless control for BLDC motor. Simulation and experiments show good performance of BLDC motor by using the new control method.
基金supported by the National Key Basic Research Program of China(Grant No.2013CB429701)the National Natural Science Foundation of China(Grant Nos.41606083,91958210,41606050 and 41210005)+1 种基金AoShan Technological Innovation Projects of National Laboratory for Marine Science and Technology(Qingdao)(2015ASKJ03)National Marine Geological Special Project(DD20190236,DD20190365,DD20190377)。
文摘The marginal sea and back-arc basins in the Western Pacific Ocean have become the focus of tectonics due to their unique tectonic location.To understand the deep crustal structure in the back-arc region,we present a 545-kmlong active-source ocean bottom seismometer(OBS)wide-angle reflection/refraction profile in the East China Sea.The P wave velocity model shows that the Moho depth rises significantly,from approximately 30 km in the East China Sea shelf to approximately 16 km in the axis of the Okinawa Trough.The lower crustal high-velocity zone(HVZ)in the southern Okinawa Trough,with V_(p) of 6.8-7.3 km/s,is a remarkable manifestation of the mantle material upwelling and accretion to the lower crust.This confirms that the lower crustal high-velocity mantle accretion is developed in the southern Okinawa Trough.During the process of back-arc extension,the crustal structure of the southern Okinawa Trough is completely invaded and penetrated by the upper mantle material in the axis region.In some areas of the southern central graben,the crust may has broken up and entered the initial stage of seafloor spreading.The discontinuous HVZs in the lower crust in the back-arc region also indicate the migration of spreading centers in the back-arc region since the Cenozoic.The asthenosphere material upwelling in the continent-ocean transition zone is constantly driving the lithosphere eastward for episodic extension,and is causing evident tectonic migration in the Western Pacific back-arc region.
基金supported by the Chinese Academy of Sciences (KZCX2-YW-132)the National Natural Sciences Foundation of China(40721003, 40830315)
文摘A 400 km-long wide-angle seismic experiment along Lianxian-Gangkou profile in South China was carried out to study contact relationship between southeast continental margin of Yangtze block and northwest continental margin of Cathaysia block. We reconstructed crustal wide-angle reflection structure by the depth-domain pre-stack migration and the crustal velocity model constructed from the traveltime fitting. The wide-angle reflection section shows different reflection （from crystalline basement and Moho） pattern beneath the Yangtze and Cathaysia blocks, and suggests the Wuchuan-Sihui fault is the boundary between them. A cluster of well-developed reflections on Moho and in its underlying topmost mantle probably comes from alternative thin layers, which may be seismic signature of strong interaction between crust and mantle in the tectonic environment of lithosphere extension.
文摘The studies of seismic tomography and wide-angle reflection have been carried out to reveal the velocity structUrebeneath the eastern Dabie orogenic belt. The result from the seismic tomography shows the high velocity bodiesmight be positioned to a depth of only about 1 .5 km below sea level within the Dabie ultra-high pressure metamorphic (UHPM) belt; the fan-profile shows the Shuihou-Wuhe fault, the demarcation between the South Dabieand the North Dabie, slopes to the south-west at a dip angle of about 45° in the bottom of upper crust. The wideangle reflection shows the middle crustal boundaries and the complex features from the lower crust.
基金Supported by the Projects of Henan Health and Family Planning Commission(No.2014005)Henan Health Department(No.201304007)Henan Science and Technology Department(No.142102310110)
文摘AIM：To compare the effects of scleral buckling using wide-angle viewing systems（WAVS） with that using indirect ophthalmoscope for the treatment of rhegmatogenous retinal detachment.METHODS：The study was a retrospective analyses of the medical records of 94 eyes（94 patients） with rhegmatogenous retinal detachment.Among them,47 eyes underwent scleral buckling using WAVS with endoiiluminator（Group W）,and 47 eyes underwent scleral buckling using indirect ophthalmoscope（Group I）.Surgical durations,primary success rate,best-corrected visual acuities（BCVA）,delayed subretinal fluid absorptions and surgical complications were compared between the two groups.RESULTS：At baseline,there were no statistical differences between the two groups in patient＇s age（P=0.997）,gender（P=0.853）,symptom duration（P=0.216）,BCVA（P=0.389）,refractive error（P=0.167）,intraocular pressure（P=0.595）,the number of retinal breaks（P=0.832）,the extent of retinal detachment（P =0.246）,subretinal demarcation line（P=0.801）,and macular detachment（P=0.811）.The follow-up period was 12 mo.The surgical durations in Group W（with or without encircling buckling） were significant shorter than those in Group I（P〈0.001 respectively）.The primary success rate was94.27%in Group W,which was similar to that in Group I（92.38%,P=0.931）.The BCVA in Group W was better than that in Group I（P〈0.001） at 1-month follow-up visit.However,there were no significant differences between the two groups at 3-month（P=0.221）,6-month（P =0.674）,and 12-month（P=0.363） follow-up visits respectively.Delayed subretinal fluid absorptions were more common in Group I than in Group W at 1-month（P=0.045） follow-up visit,but there were no significant differences between the two groups at 3-month（P=0.111）,6-month（P =1.000） and 12-month follow-up visits respectively.CONCLUSION：Scleral buckling using WAVS can be an alternative choose for rhegmatogenous retinal detachment
基金the National Natural Science Foundation of China(No.41374123)
文摘Polarity reversals may occur to transmitted P waves if the incidence angle is greater than the critical incidence angle. We analyze the characteristics of reflection and transmission coefficients under the condition of wide incidence angle based on Zoeppritz equations. We find that for specific conditions, as the incidence angle increases, the characteristic curve of the transmitted P-wave coefficient enters the third quadrant from the first quadrant through the origin, which produces a transition in the transmitted P wave and the corresponding coefficient experiences polarity reversal. We derive the incidence angle when the transmitted P-wave coefficient is zero and verify that it equals zero by using finite-difference forward modeling for a single-interface model. We replace the water in the model reservoir by gas and see that the reservoir P-wave velocity and density decrease dramatically. By analyzing the synthetic seismogram of the transmitted P wave in the single-interface model, we show that the gas-saturated reservoir is responsible for polarity reversal.
文摘Firstly,the relationship between the accuracy of low altitude aerial photogrammetry and the field angle of camera is made by a quantitative analysis from the theory.The conclusion that the low altitude photogrammetry should use wide-angle camera as much as possible is done.Then,the limitation of the single lens camera to expand field angle and the combined wide-angle camera existing on the market not suitable for light load of low altitude UAV(Unmanned Aerial Vehicle)due to excessive weight are pointed out.The characteristics of combined wide-angle low altitude light camera with self-calibration and self-stabilization developed by the author are described,especially the principle of self-calibration for the combination of static error and dynamic error.Based on the practice of large scale mapping,a technical procedure in aerial photography by taking with wide-angle camera and large overlap simultaneously for improving the accuracy of low altitude photogrammetry is proposed.The typical engineering produced data is used to verity the above theoretical analysis.A technical route for increasing accuracy of low altitude photogrammetry with combined wide-angle camera is expounded.
文摘The design and fabrication of graded-refractive-index （GRIN） antireflection （AR） coatings with wide-angle and broadband characteristics are demonstrated. The optimization of the graded-index profiles with a genetic algorithm is used in the design of the GRIN AR coatings. The average reflectance over a wavelength range from 400 nm to 800 nm and angles of incidence from 0° to 80° could be reduced to only 0.1% by applying an optimized AR coating onto BK7 glass. The optimization of step-graded GRIN AR coating is then further investigated in detail. A two-layer AR coating was deposited by electron beam evaporation with glancing angle deposition technology, and the positional homogeneity was improved by depositing the film from two opposite directions. The microstructure of the AR coating was investigated by scanning electron microscopy, and the residual reflectances of the coating sample are in agreement with theoretical calculations. The optimized GRIN AR coatings are beneficial to increasing the efficiency of light utilization.
基金Project supported by the Fundamental Research Funds for the Central Universities of China (Grant No. JD2020JGPY0010)the China Post-doctoral Science Foundation (Grant No. 2020M671834)the Anhui Province Post-doctoral Science Foundation, China (Grant No. 2020A397)。
文摘For potential military applications, a flexible metamaterial absorber(MMA) working on whole K-bands with totalthickness of 3.367 mm, ultra-broadband, polarization-insensitive, and wide-angle stability is presented based on frequencyselective surface(FSS). The absorber is composed of polyvinyl chloride(PVC) layer, polyimide(PI) layer, and poly tetra fluoro ethylene(PTFE) layer, with a sandwich structure of PVC–PI–PTFE–metal plate. Periodic conductive patterns play a crucial role in the absorber, and in traditional, it is designed on the upper surface of PI layer to form LC resonance. Different from commonly absorber, all the patterns are located on the lower surface of the PI layer in this work, and hence the impedance matching and absorptivity are improved in this purposed absorber. The flexible absorber with patterns on lower surface of the PI layer is compared with that on upper surface of the PI layer, the difference and the reasons are explained by absorption mechanism based on equivalent circuit model, and surface current density and electric field distribution are used to analyze resonance peaks. Absorptivity is greater than 90% in a frequency range of 10.47 GHz–45.44 GHz with relative bandwidth of 125.1%, covering the whole Ku, K, Ka, and some of X, U bands, especially containing the whole K bands from 12 GHz to 40 GHz. Radar cross section(RCS) is reduced at least 10 dB in 11.48 GHz–43.87 GHz frequency ranges,and absorption remained about 90% when the incident angle changed from 0°to 55°. The purposed absorber is fabricated,measured, and experiment results show good agreement with theoretical analysis and numerical simulation. After bonded on outer surface of different cylinders with diameters of 200 mm and 100 mm, the absorption of MMA is approximately reduced 10% and 20% respectively, which shows good conformal character with surface of various curvatures. Due to the attractive performance on strong absorption in the whole K-bands, flexible and easy conformal, our design exhibits broad potential application in radar stealth and sensors.
文摘Metalenses are essential components in terahertz imaging systems.However,without careful design,they show limited field of view and their practical applications are hindered.Here,a wide-angle metalens is proposed whose structure is optimized for focusing within the incident angles of±25°.Simulation and experiment results show that the focusing efficiency,spot size,and modulation transfer function of this lens are not sensitive to the incident angle.More importantly,this wide-angle metalens follows the ideal Gaussian formula for the object-image relation,which ensures a wider field of view and better contrast in the imaging experiment.
基金supported by a“973”Project of the Ministry of Science and Technology of China(Grant No.2002CB412604)by the Key Project of the Innovation Program of the Chinese Academy of Sciences(Grant No.KZCX2-109).
文摘The wide-angle seismic profile between Menglian and Malong crosses the Baoshan block (Gondwana-typed), and Simao and southwestern Yangtze blocks (Yangtze-typed). By in-terpreting the wide-angle seismic data, we obtained the seismic crust/upper mantle structure of P-wave velocities together with the seismic reflections of these three blocks, Changning- Menglian and Mojiang suture zones among the mentioned three blocks. Our interpreting results demonstrate that the P-wave crustal velocity of Simao block is slower than that of Baoshan and southwestern Yangtze block and the crustal thickness gradually thickens from the Baoshan block, Simao to southwestern Yangtze block. Crustal reflection patterns of these three blocks have dis-tinct differences too. For the Gondwana-typed blocks, seismic reflections in the upper crust are well developed while in middle-lower crust they are very weak. The crustal reflections in the Yangtze block are very well developed. The crustal reflection patterns in Simao and southwest-ern Yangtze blocks are distinguishable. The average thickness of the crust in the studied area is about 40 km. And we make some discussions on the crustal thickening model of the three blocks in western Yunnan and tectonic setting of seismic developing and interaction of Gondwana and Yangtze blocks.
基金The first author gratefully acknowledges the financial support of the Outstanding Youth Scientist Project of the National Natural Science Foundation of China (Grant No. 4985108), Tibet Project from Resources and Environment Bureau of the Chinese Ac
文摘We recognized 6 sets of reflecting P- and S-wave events from Moho and other interfaces within the crust, respectively, with the wide-angle seismic data acquired from 510 km-long Selincuo-Ya'anduo profile in the northern Tibet, fitted the observed events with forward modeling, and interpreted crustal structure of P- and S-wave velocities and Poisson's ratio under the profile. The results demonstrate that the crustal structure between Yarlungzangbo and Bangong-Nujiang sutures changes abruptly, and the crust is the thickest at the middle part of the profile with thickness of 80 km or more. The 'down-bowing' Moho is the striking feature for the crustal variation along the west-east direction. The Moho uplifts with steps, and the uplifting rate westward is greater than that eastward. The heterogeneity of P- and S-wave velocities exists both vertically and horizontally, and one lower velocity layer (LVL) exists with the depth range of 27-34 km and the thickness range of 5-7 km. For the upper crust, Poisson's ratio is the lowest at the middle part of the profile; for the lower crust, the Poisson's ratio at the east segment is lower than that at west segment, which means that the crustal rigidity for the upper crust is different from the lower crust, and the lower crust under the east segment of the profile is more ductile. We infer that the substance in the lower crust endured eastward flow along with the collision between Eurasian and Indian plates, and the 'down-bowing' Moho is attributable to the multi-phase E-W tectonic processes.
基金supported by National Basic Research Program of China (Grant No. 2007CB411701)National Natural Science Foundation of China (Grant Nos. 40876035 and 91028006)Scientific Research Fund of the Second Institute of Oceanography, State Oceanic Administration (Grant No. JG200803)
文摘The crustal structure of the northwestern sub-basin area of the South China Sea was modeled by inverting a wide-angle seismic survey line across the entire region and on both sides of its bounding continental margins. The survey line extended over 484 km. A total of 14 Ocean Bottom Seismometers (OBS) were deployed at intervals of 30 km to record air-gun array sources with a combined volume of 5160 in 3 . The crustal velocity structure of the northwestern sub-basin area was acquired through the integration of multi-channel seismic data. OBS data were processed and modeled initially using ray tracing inversion techniques. Results indicate that crustal thickness under the continental slope decreases from 21 to 11 km, crustal thickness of the northwestern sub-basin is 7.7 km, and the depth to the Moho ascends from 21 km under the upper continental slope to 11 km under the middle basin. The crust of the northwestern sub-basin is similar to that of the eastern sub-basin in its oceanic crustal structure. This structure has a thicker layer 1 (sedimentary layer) and a thinner layer 2. These characteristics are especially clear in the eastern sub-basin, which differs somewhat from typical oceanic crust. The tectonic geometry and velocity structure of the northwestern sub-basin and its margins comprise a symmetrical conjugate and indicate a pure shear mode with regard to the continental margin rifting mechanism. We did not find clear seismic signals from high velocity layers under the lower crust of the continental margin in the northern part of the northwestern sub-basin, which provides new evidence for the idea that the western part of the northern continental margin of the South China Sea constitutes nonvolcanic crust. Because the seafloor spreading period of the northwestern sub-basin was short, layer 2 might have experienced asymmetrical basalt magma flows, which may have blurred the magnetic anomaly lineations of the northwestern sub-basin.
文摘The Fuzhou basin and its vicinities are located at the northern end of the southeastern coastal seismic zone of the mainland of China. By the joint explorations of high-resolution seismic refraction and wide-angle reflection/refraction as well as deep seismic reflection in the region, which is the first synthetic profile in China, its fine velocity structure and geometric structure from the ground to Moho discontinuity is obtained. The result shows that the crust is obviously layered with a thickness of about 32 km. Basically, it consists of two parts: upper crust and lower crust. The velocity of the upper crust is 5.9-6.2 km/s in which there is a 3-4-km-thick weak low-velocity layer between the depths of 10-15 km, while the velocity of the lower crust in the range of 6.3-7.2 km/s. There exists a strong velocity gradient layer about 3 km thick above the Moho discontinuity whose velocity increases from 6.5 to 7.27 km/s. There exist high-angle normal faults that are small in size and extend only in the shallow crust. These faults are the secondary developed on the hanging wall of westward dipping low-angle normal faults. Thus, their seismogenic ability is limited, however, there exists a high-angle deep fault in the crust from Changle-Zaoan fault zone to seashore fault zone. This deep fault has cut the interface between the upper and lower crusts and Moho discontinuity, and may be the deep structure to trigger destructive earthquake source in future to affect Fuzhou City. These results have advanced the detecting precision of the deep structure in the southeastern coastal seismic zone of the mainland of China. In the aspect of the combined feature of the deep and shallow extensional structures that consist of the westward dipping low-angle normal faults and secondary normal faults on their hanging walls in the upper crust, it is firstly obtained that a united structural interpretation has deepened the knowledge about the deep dynamic process in the southeastern coastal seismic zone. At the same time, in synthetic application of deep seismic detecting methods for deep tectonic background, it possesses a wide referenced meaning to the other regions.
基金supported by the National Natural Science Foundation of China (No.41230318)the Natural Science Foundation of Shandong Province (No.ZR2014DM006)+1 种基金the China Postdoctoral Science Foundation (No.2015M582138)the Scientific Research Foundation for the Returned Overseas Chinese Scholars,Ministry of Education
文摘The seawater column is typically taken as a homogeneous velocity layer in wide-angle crustal seismic surveys in marine environments. However, heterogeneities in salinity and temperature throughout the seawater layer result insignificant lateral variations in its seismic velocity, especially in deep marine environments. Failure to compensate for these velocity inhomogeneities will introduce significant artifacts in constructing crustal velocity models using seismic tomography. In this study, we conduct numerical experiments to investigate the impact of heterogeneous seismic velocities in seawater on tomographic inversion for crustal velocity models. Experiments that include lateral variation in seawater velocity demonstrated that the modeled crustal velocities were contaminated by artifacts from tomographic inversions when assuming a homogeneous water layer. To suppress such artifacts, we propose two strategies：（1） simultaneous inversion of water velocities and the crustal velocities;（2） layer-stripping inversion during which to first invert for seawater velocity and then correct the travel times before inverting for crustal velocities. The layer-stripping inversion significantly improves the modeling of variation in seawater velocity when preformed with seismic sensors deployed on the ocean bottom and in the water column. Such strategies improve crustal modeling via wide-angle seismic surveys in deep-marine environment.
基金supported by the Shanghai Science and Technology Committee Innovation Grant (No. 19ZR1404600)the National Natural Science Foundation of China (No. 52075100)
文摘A key limitation in the observation of instruments used in operations and heart sutures during a procedure is the scattering and absorption during optical imaging in the presence of blood.Therefore,we propose a novel real-time fiber-optic infrared imaging system simultaneously capturing a flexible wide field of view(FOV) and large depth of field infrared image in real time.The assessment criteria for imaging quality of the objective and coupling lens have been optimized and evaluated.Furthermore,the feasibility of manufacturing and assembly has been demonstrated with tolerance sensitivity and the Monte Carlo analysis.The simulated results show that the optical system can achieve a large working distance of 8 to25 mm,a wide FOV of 120°,and the relative illuminance is over 0.98 in the overall FOV.To achieve high imaging quality in the proposed system,the modulation transfer function is over 0.661 at 16.7 Ip/mm for a 320×256 short wavelength infrared camera sensor with a pixel size of 30 μm.
基金supported by the National Key R&D Program of China(Grant Nos.2019YFA0708602,2019YFA0708603,and 2016YFC0600201)the National Natural Science Foundation of China(Grant Nos.42130807,42074099)the China Geological Survey(Grant No.1212011220243)。
文摘To investigate the geodynamic processes of Mesozoic large-scale mineralization in South China,we deployed a 350-km-long,wide-angle seismic reflection/refraction sounding profile between Yingshan in Hubei and Changshan in Zhejiang.This profile traverses the Cu-Au metallogenic belt in the middle and lower reaches of the Yangtze River(YMB),the Jiangnan W-polymetal metallogenic belt(JNMB),and the Qinhang Cu-polymetal metallogenic belt(QHMB).Our imaging results reveal various interesting velocity features along the profile.(1)The velocity structure is characterized by vertical layering and horizontal blocking;(2)the YMB is marked by high velocity and high V_(p)/V_(s) ratios in general with a significantly uplifted Moho interface and a thin crust of~31 km,and the lower crust contains high-velocity anomalies and has the characteristics of a crustmantle transition zone;(3)the JNMB is bounded by the Jiangnan fault and Jingdezhen-Huangshan fault and has low-velocity anomalies and low V_(p)/V_(s) ratios;and(4)the QHMB is characterized by high-velocity anomalies and high V_(p)/V_(s) ratios.The highvelocity anomalies in the YMB and QHMB represent relatively Cu-Au-rich mafic juvenile lower crust.The formation of this kind of crust is considered to be related to mantle-derived magma underplating or residues of Neoproterozoic oceanic crustal materials,and it also provided sources for large-scale Cu-Au mineralization in the Mesozoic.The JNMB has features similar to those of ancient crusts enriched in W-Sn,the partial melting of which played a leading role in the formation of the superlarge W deposits in this belt.Considering these results and other regional geological data,we propose that a large-scale oblique upwelling of the asthenosphere along the collisional belt of the Yangtze and Cathaysia blocks during the Mesozoic was the deep driving mechanism for the explosive mineralization of Cu,Au,and W in northeastern South China.The boundaries of the blocks or terrains and discontinuities of the lithosphere were the main channels for deep heat and magmas and therefore controlled the spatial distribution of the metallogenic belt.
基金supported by Funding Project for Academic Human Resources Development in Institutions of Higher Learning (Grant No. PHR201107145)
文摘The partial derivative equations of Zoeppritz equations are established and the derivatives of each matrix entry with respect to wave vectors are derived in this paper.By solving the partial derivative equations we obtained the partial derivatives of seismic wave reflection coefficients with respect to wave vectors,and computed the Goos-Hnchen shift for reflected P-and VS-waves.By plotting the curves of Goos-Hnchen shift,we gained some new insight into the lateral shift of seismic reflection wave.The lateral shifts are very large for glancing wave or the wave of the incidence angle near the critical angle,meaning that the seismic wave propagates a long distance along the reflection interface before returning to the first medium.For the reflection waves of incidence angles away from the critical angle,the lateral shift is in the same order of magnitude as the wavelength.The lateral shift varies significantly with different reflection interfaces.For example,the reflected P-wave has a negative shift at the reflection interface between mudstone and sandstone.The reflected VS-wave has a large lateral shift at or near the critical angle.The lateral shift of the reflected VS-wave tends to be zero when the incidence angle approaches 90°.These observations suggest that Goos-Hnchen effect has a great influence on the reflection wave of wide-angles.The correction for the error caused by Goos-Hnchen effect,therefore,should be made before seismic data processing,such as the depth migration and the normal-moveout correction.With the theoretical foundation established in this paper,we can further study the correction of Goos-Hnchen effect for the reflection wave of large incidence angle.
