The synthesis of a continuous IMF zeolite membrane was fabricated on tubular substrates by seeded growth for the first time. The straight channels of IMF zeolite with diameters of 0.53–0.59 nm are distinguishable for...The synthesis of a continuous IMF zeolite membrane was fabricated on tubular substrates by seeded growth for the first time. The straight channels of IMF zeolite with diameters of 0.53–0.59 nm are distinguishable for p-xylene from o-xylene molecules. Pure IMF-phase high-silica IM-5 zeolite seeds with uniform and fine crystal size were fabricated by a new sonication-assisted aging process. The seeds were coated on the support by dipcoating and induced the formation of continuous membrane. Separation performance in p-/o-xylene mixture was investigated at various temperature and pressure. The typical IM-5zeolite membrane had p-/o-xylene separation factor of 3.7. Our results suggest that IM-5 zeolite is a potentially good membrane material for the separation of xylene mixtures.展开更多
Metal ions doping is a typical approach for tuning sensing properties of metal oxide semiconductors based gas sensors.Herein,hierarchical flower-like pure and In-doped Co_(3)O_(4) nanostructures assembled by porous tw...Metal ions doping is a typical approach for tuning sensing properties of metal oxide semiconductors based gas sensors.Herein,hierarchical flower-like pure and In-doped Co_(3)O_(4) nanostructures assembled by porous two-dimensional(2D)nanosheets are synthesized via a solvothermal method and annealing process.The sensing measurements display that the In@Co_(3)O_(4)-4 based sensor possesses high response value of 55.9 toward 100 ppm xylene at 150 ℃,which is nearly 3.8times larger than that of pure Co_(3)O_(4) sensor.Furthermore,it possesses good selectivity and anti-humidity properties.Combined with the results of DFT calculations,the mechanism of enhanced gas sensing performance is analyzed systematically.展开更多
1-hexene aromatization is a promising technology to convert excess olefin in fluid catalytic cracking(FCC)gasoline to high-value benzene(B),toluene(T),and xylene.Besides,the increasing market demand of xylene has put ...1-hexene aromatization is a promising technology to convert excess olefin in fluid catalytic cracking(FCC)gasoline to high-value benzene(B),toluene(T),and xylene.Besides,the increasing market demand of xylene has put forward higher requirements for new generation of catalyst.For increasing xylene yield in 1-hexene aromatization,the effect of mesopore structure and spatial distribution on product distribution and Zn loading was studied.Catalysts with different mesopore spatial distribution were prepared by post-treatment of parent HZSM-5 zeolite,including NaOH treatment,tetra-propylammonium hydroxide(TPAOH)treatment,and recrystallization.It was found the evenly distributed mesopore mainly prolongs the catalyst lifetime by enhancing diffusion properties but reduces the aromatics selectivity,as a result of damage of micropores close to the catalyst surface.While the selectivity of high-value xylene can be highly promoted when the mesopore is mainly distributed interior the catalyst.Besides,the state of loaded Zn was also affected by mesopores spatial distribution.On the optimized catalyst,the xylene selectivity was enhanced by 12.4%compared with conventional Zn-loaded parent HZSM-5 catalyst at conversion over 99%.It was attributed to the synergy effect of mesopores spatial distribution and optimized acid properties.This work reveals the role of mesopores in different spatial positions of 1-hexene aromatization catalysts in the reaction process and the influence on metal distribution,as well as their synergistic effect two on the improvement of xylene selectivity,which can improve our understanding of catalyst pore structure and be helpful for the rational design of high-efficient catalyst.展开更多
The aromatic compounds,including o-xylene,m-xylene,p-xylene,and ethylbenzene,primarily originate from the catalytic reforming of crude oil,and have a wide variety of applications.However,because of similar physical an...The aromatic compounds,including o-xylene,m-xylene,p-xylene,and ethylbenzene,primarily originate from the catalytic reforming of crude oil,and have a wide variety of applications.However,because of similar physical and chemical properties,these compounds are difficult to be identified by gas chromatography(GC)without standard samples.With the development of modern nuclear magnetic resonance(NMR)techniques,NMR has emerged as a powerful and efficient tool for the rapid analysis of complex and crude mixtures without purification.In this study,the parameters of one-dimensional(1D)total correlation spectroscopy(TOCSY)NMR techniques,including 1D selective gradient TOCSY and 1D chemicalshift-selective filtration(CSSF)with TOCSY,were optimized to obtain comprehensive molecular structure information.The results indicate that the overlapped signals in NMR spectra of nonpolar aromatic compounds(including o-xylene,m-xylene,p-xylene and ethylbenzene),polar aromatic compounds(benzyl alcohol,benzaldehyde,benzoic acid),and aromatic compounds with additional conjugated bonds(styrene)can be resolved in 1D TOCSY.More importantly,full molecular structures can be clearly distinguished by setting appropriate mixing time in 1D TOCSY.This approach simplifies the NMR spectra,provides structural information of entire molecules,and can be applied for the analysis of other structural isomers.展开更多
Four pure cultures were isolated from soil samples potentially contaminated with gasoline compounds either at a construction site near a gas station in Fai Chi Kei,Macao SAR or in the northern parts of China（Beijing,...Four pure cultures were isolated from soil samples potentially contaminated with gasoline compounds either at a construction site near a gas station in Fai Chi Kei,Macao SAR or in the northern parts of China（Beijing,and Hebei and Shandong）.The effects of different concentrations of benzene,toluene,ethylbenzene,and three isomers（ortho-,meta-,and para-） of xylene（BTEX）,total petroleum hydrocarbons（TPH）,and trichloroethylene（TCE）,when they were present in mixtures,on the bio-removal effciencies of microbial isolates were investigated,together with their interactions during the bio-removal process.When the isolates were tested for the BTEX（50-350 mg/L）/TPH（2000 mg/L） mixture,BTEoX in BTEoX/TPH mixture was shown with higher bio-removal effciencies,while BTEmX in BTEmX/TPH mixture was shown with the lowest,regardless of isolates.The TPH in BTEmX/TPH mixture,on the other hand,were generally shown with higher bio-removal effciencies compared to when TPH mixed with BTEoX and BTEpX.When these BTEX mixtures（at 350 mg/L） were present with TCE（5-50 mg/L）,the stimulatory effect of TCE toward BTEoX bio-removal was observed for BTEoX/TCE mixture,while the inhibitory effect of TCE toward BTEmX for BTEmX/TCE mixture.The bio-removal effciency for TPH was shown lower in TPH（2000 mg/L）/TCE（5-50 mg/L） mixtures compared to TPH present alone,implying the inhibitory effect of TCE toward TPH bio-removal.For the mixture of BTEX（417 mg/L）,TPH（2000 mg/L） along with TCE（5- 50 mg/L）,TCE was shown co-metabolically removed more effciently at 15 mg/L,probably utilizing BTEX and/or TPH as primary substrates.展开更多
Objective This study was designed to conduct a retrospective and systematic occupational health risk assessment(OHRA)of enterprises that used benzene,toluene,and xylene(BTX)in Shanghai,China.Methods All data for the s...Objective This study was designed to conduct a retrospective and systematic occupational health risk assessment(OHRA)of enterprises that used benzene,toluene,and xylene(BTX)in Shanghai,China.Methods All data for the study were obtained from 1,705 occupational health examination and evaluation reports from 2013 to 2017,and a semiquantitative model following Chinese OHRA guidelines(GBZ/T 298-2017)was applied for the assessment.Results The selected enterprises using BTX were mainly involved in manufacturing of products.Using the exposure level method,health risk levels associated with exposure to BTX were classified as medium,negligible,or low.However,the risk levels associated with benzene and toluene were significantly different according to job types,with gluers and inkers exhibiting greater health risks.For the same job type,the health risk levels assessed using the comprehensive index method were higher than those using the exposure level method.Conclusion Our OHRA reveals that workers who are exposed to BTX still face excessive health risk.Additionally,the risk level varied depending on job categories and exposure to specific chemicals.Therefore,additional control measures recommended by OHRA guidelines are essential to reduce worker exposure levels.展开更多
Toluene methylation with methanol on H‐ZSM‐5(Z5)zeolite for the directional transformation of toluene to xylene has been industrialized.However,great challenges remain because of the high energy barrier of methanol ...Toluene methylation with methanol on H‐ZSM‐5(Z5)zeolite for the directional transformation of toluene to xylene has been industrialized.However,great challenges remain because of the high energy barrier of methanol deprotonation to the methoxy group,the side reaction of methanol to olefins,coke formation,and the deactivation of zeolites.Herein,we report the toluene methylation coupled with CO hydrogenation to showcase an enhancement in para‐xylene(PX)selectivity by employing a bifunctional catalyst composed of ZnZrO_(x)(ZZO)and modified Z5.The results showed that a PX selectivity of up to 81.8%in xylene and xylene selectivity of 64.8%in hydrocarbons at 10.3%toluene conversion can be realized over the bifunctional catalyst on a fixed‐bed reactor.The selectivity of gaseous hydrocarbons decreased to 10.9%,and approximately half of that was observed in methanol reagent route where the PX selectivity in xylene was 38.8%.We observed that the acid strength,the quantity ratio of Brönsted and Lewis acid sites,and the pore size of zeolites were essential for the PX selectivity.The investigation of the H_(2)/D_(2) kinetic isotope effect revealed that the newborn methyl group in xylene resulted from the hydrogenation of CO rather than toluene disproportionation.Furthermore,the catalyst showed no evident deactivation within the 100 h stability test.The findings offer a promising route for the production of value‐added PX with high selectivity via toluene methylation coupled with syngas conversion.展开更多
Desilication accompanied with minimum loss of crystallinity effect of a high alumina ZSM-5 zeolite on the isomerization reaction of ethylbenzene/xylene mixtures has been considered.Desilication was assessed through XR...Desilication accompanied with minimum loss of crystallinity effect of a high alumina ZSM-5 zeolite on the isomerization reaction of ethylbenzene/xylene mixtures has been considered.Desilication was assessed through XRF,XRD,FTIR,TEM,nitrogen adsorption/desorption,NH_3-TPD,^(29)Si and^(27)Al MAS NMR analytical techniques.Desilication was accompanied with the creation of super acid sites.There exists a limit(Si/Al molar ratio of9.67)for keeping high crystallinity and obtaining improved catalytic performance.Desilication promotes ethylbenzene conversion by disproportionation and trans-alkylation reactions while the same reactions are limited for the xylene isomers.The p-xylene approach to equilibrium improves by more than 7% at 400℃ and a WHSV of 2 h^(-1)for the optimum sample with respect to the parent zeolite.At the same conditions,the optimum sample exhibits the maximum ethylbenzene conversion of 89%,i.e.more than 40%w.r.t.of the parent zeolite.However,the xylene yield decreases only 3%.展开更多
The solid-liquid equilibria of musk ketone + musk xylene, musk xylene +l,3-dimethyl-2,4-dinitro-5-tert-butyl benzene are measured by differential scanning calorimeter (DSC), these systems are proved to be simple eutec...The solid-liquid equilibria of musk ketone + musk xylene, musk xylene +l,3-dimethyl-2,4-dinitro-5-tert-butyl benzene are measured by differential scanning calorimeter (DSC), these systems are proved to be simple eutectics. Moreover the melting points and the fusion enthalpies of musk ketone, musk xylene and 1,3-dimethyl-2,4-dinitro-5-tert-butyl benzene are also measured by the DSC. These solid-liquid equilibrium data and the heats of fusion are reported for the first time. Then UNIFAC model is used to correlate the sofid-liquid equilibrium data. It is shown that the solid-liquid equilibria of musk systems can be predicted by the UNIFAC model.展开更多
Musk xylene（MX） is frequently used as fragrances in formulation of personal care products. Quantification of a bound 4-amino- MX（4-AMX） as cysteine adducts in trout hemoglobin（Hb） was made by gas chromatography-...Musk xylene（MX） is frequently used as fragrances in formulation of personal care products. Quantification of a bound 4-amino- MX（4-AMX） as cysteine adducts in trout hemoglobin（Hb） was made by gas chromatography-ion trap-mass spectrometry（GC/MS）. The Hb samples were collected from trout after 24 h exposure to MX at 10μg/g, and or menhaden oil（control）. The formation of cysteine-Hb adduct was observed from nitroso derivative of MX, released by alkaline hydrolysis. The released 4-AMX metabolite was extracted in n- hexane. The extract was then reduced by evaporation, and analyzed by GC/MS. When similar agreement of mass spectral features and retention time of 4-AMX were obtained in both standard and sample solutions, the presence of 4-AMX metabolite in the Hb was confirmed. The concentration of 4-AMX was found to be 3.1 × 10^-6 6.9 × 10^-6 mg/g in the Hb solution. Quantitation was made based on an internal standard, a calibration plot, and response factor. In the non-hydrolyzed and laboratory blank extracts, the 4-AMX metabolite was not detected. Additionally, coeluting and interfefing ions were observed in the biological samples.展开更多
MIL-125 is a metal-organic framework with great potential for the adsorption and separation of xylene isomers.However,MIL-125 is usually synthesized under anhydrous and anaerobic conditions.In this study,homogeneously...MIL-125 is a metal-organic framework with great potential for the adsorption and separation of xylene isomers.However,MIL-125 is usually synthesized under anhydrous and anaerobic conditions.In this study,homogeneously shaped and highly crystalline MIL-125 was synthesized by introducing water-resistant titanium-containing oligomers into the synthesis process.With the assistance of the novel oligomers,MIL-125 can be synthesized in the presence of water,which meets batch-production requirements.The adsorption separation performance of the obtained highly crystalline MIL-125 was also significantly enhanced.The para-xylene/meta-xylene selectivity can reach 13.5 in mesitylene,which is higher than the selectivity values of most previously reported para-selective adsorbents.The MIL-125 xylene separation performance was verified using both batch adsorption and breakthrough experiments in the liquid phase.In addition,the influence of the solvent effect was evaluated through microcalorimetric experiments,liquid-phase adsorption experiments,and theoretical calculations.展开更多
The ternary phase diagrams of musk ketone, musk xylene and various solvent were obtained by calcu- lations. Moreover, the double saturated lines were found to be curve for the first time. The methods to separate eutec...The ternary phase diagrams of musk ketone, musk xylene and various solvent were obtained by calcu- lations. Moreover, the double saturated lines were found to be curve for the first time. The methods to separate eutectic mixtures of musks by solution crystallization were suggested on the basis of these phase diagrams. A new process was proposed to get musk ketone and musk xylene from the eutectics by adding acetonitrile and heptane in turn, which was verified by experiments. Musk xylene with purity of 97.50% and musk ketone with purity of 98.10% were obtained.展开更多
A bimetal-exchanged NaY zeolite(Cu(Ⅰ)-Y(Ⅲ)-Y)with a desirable adsorptive desulfurization(ADS)performance was prepared and characterized by means of X-ray diffraction,specific surface area measurements,X-ray fluoresc...A bimetal-exchanged NaY zeolite(Cu(Ⅰ)-Y(Ⅲ)-Y)with a desirable adsorptive desulfurization(ADS)performance was prepared and characterized by means of X-ray diffraction,specific surface area measurements,X-ray fluorescence spectrometer,X-ray photoelectron spectroscopy,thermal gravity analysis and Fourier transform infrared spectroscopy.The effect of Y(Ⅲ)ions on ADS in the presence of the xylenes was investigated.Results indicated that the ADS performance of Y(Ⅲ)-Y is higher than that of most reported CeY.The Y(Ⅲ)-based Cu(Ⅰ)-Y(Ⅲ)-Y demonstrated the higher breakthrough loading than those of reported Ce(Ⅲ)/Ce(Ⅳ)-based transition metal Y zeolites,showing that Y(Ⅲ)ions play a promoting role in improving the ADS selectivity.For Cu(Ⅰ)-Y(Ⅲ)-Y,a new strong S-M interaction(S stands for sulfur,while M stands for metal)active site was formed,which might be caused by the synergistic effect between Cu(Ⅰ)and Y(Ⅲ).The Cu(Ⅰ)-Y(Ⅲ)-Y,which combined the advantages of Cu(I)-Y and Y(Ⅲ)-Y,is a kind of promising adsorbent.The breakthrough loading decreased in the order of Cu(Ⅰ)-Y(Ⅲ)-Y>Y(Ⅲ)-Y>Cu(Ⅰ)-Y,and the effect of xylene isomers on the sulfur removal was in the order of ortho-xylene>meta-xylene>para-xylene,which exhibited the same trend with the bond order of xylenes.展开更多
The Dalian Institute of Chemical Physics of CAS has made great strides in selective oxidation studies after having performed successful commercial testing of the novel catalyst for oxidation ofparaxylene in the 100 kt...The Dalian Institute of Chemical Physics of CAS has made great strides in selective oxidation studies after having performed successful commercial testing of the novel catalyst for oxidation ofparaxylene in the 100 kt/a scale.展开更多
The Bacillus firmus was immobilized into Ca-alginate beads according to the different initial biomass concentration, calcification time and activation time. Three types of immobilized Bacillus firmus beads were packed...The Bacillus firmus was immobilized into Ca-alginate beads according to the different initial biomass concentration, calcification time and activation time. Three types of immobilized Bacillus firmus beads were packed respectively in trickling biofilter to purify xylene contained waste gases, and the performance of immobilized-cell biofilter was compared with traditional biofilm attached biofilter packed with two types of ceramic pellets. The results showed that three types of immobilized beads had different capabilities for removing xylene and life-spans. Higher initial biomass in immobilized beads resulted in better performance but shorter life-span. Activation process can remarkably enhance the activity of bacteria, and the removal efficiency of xylene can substantially be improved. Calcification time had influence on life-span of immobilized beads. Without acclimation, the cell-entrapped biofilter can obtain the maximum elimination capacity of 92.4 g/（m^3·h）. However, compared with biofilm attached biofilter, it has a poorer intrinsic drawback in volatile organic compounds （VOCs） removal due to the existence of excess mass transfer resistance.展开更多
An excellent separation of xylene isomers is reported using 2, 6-O-di-pentyl-3-O-acetyl-beta-CD as capillary stationary phase. The optimum conditions for the separation are also discussed.
On November 30, 2018 “The technology for manufacture of xylene from toluene and methanol with coproduction of low-carbon olefins” jointly developed by the Yanchang Petroleum Group (YPG) and the CAS Dalian Institute ...On November 30, 2018 “The technology for manufacture of xylene from toluene and methanol with coproduction of low-carbon olefins” jointly developed by the Yanchang Petroleum Group (YPG) and the CAS Dalian Institute of Chemical Physics (DICP) had passed the appraisal of research achievements. In order to open up a new In order to open up a new technical route for alkylation of toluene to p-xylene, the technical personnel of YPG and DICP have been jointly engaging in the activities for tackling key problems to set up a 10 kt/a commercial unit for producing xylene through reaction of methanol with toluene along with coproduction of low-carbon olefins.展开更多
The recovery of caproic acid from the aqueous stream is of practical relevance due to its market value and the stringent environmental standards. The profound success of reactive extraction has been noted in the recov...The recovery of caproic acid from the aqueous stream is of practical relevance due to its market value and the stringent environmental standards. The profound success of reactive extraction has been noted in the recovery of carboxylic acids from dilute solutions. In present paper, equilibrium of caproic acid with aliquat-336, a quaternary amine compound, in xylene and Methyl Isobutyl Ketone (MIBK) has been studied. Equilibrium parameters such as distribution coefficients, loading ratio, degree of extraction and equilibrium complexation constants have been presented. The data obtained is useful in understanding the equilibrium characteristics and efficient design of the recovery process of caproic acid by reactive extraction.展开更多
基金the financial supports that are from the National Natural Science Foundation of China (21921006, U22A20414 and 21938007)the Natural Science Foundation of Jiangsu Province (BK20220002)the open project of the State Key Laboratory of China (KL21-04 and D2021FK055)。
文摘The synthesis of a continuous IMF zeolite membrane was fabricated on tubular substrates by seeded growth for the first time. The straight channels of IMF zeolite with diameters of 0.53–0.59 nm are distinguishable for p-xylene from o-xylene molecules. Pure IMF-phase high-silica IM-5 zeolite seeds with uniform and fine crystal size were fabricated by a new sonication-assisted aging process. The seeds were coated on the support by dipcoating and induced the formation of continuous membrane. Separation performance in p-/o-xylene mixture was investigated at various temperature and pressure. The typical IM-5zeolite membrane had p-/o-xylene separation factor of 3.7. Our results suggest that IM-5 zeolite is a potentially good membrane material for the separation of xylene mixtures.
文摘Metal ions doping is a typical approach for tuning sensing properties of metal oxide semiconductors based gas sensors.Herein,hierarchical flower-like pure and In-doped Co_(3)O_(4) nanostructures assembled by porous two-dimensional(2D)nanosheets are synthesized via a solvothermal method and annealing process.The sensing measurements display that the In@Co_(3)O_(4)-4 based sensor possesses high response value of 55.9 toward 100 ppm xylene at 150 ℃,which is nearly 3.8times larger than that of pure Co_(3)O_(4) sensor.Furthermore,it possesses good selectivity and anti-humidity properties.Combined with the results of DFT calculations,the mechanism of enhanced gas sensing performance is analyzed systematically.
基金supported by National Natural Science Foundation of China(22021004).
文摘1-hexene aromatization is a promising technology to convert excess olefin in fluid catalytic cracking(FCC)gasoline to high-value benzene(B),toluene(T),and xylene.Besides,the increasing market demand of xylene has put forward higher requirements for new generation of catalyst.For increasing xylene yield in 1-hexene aromatization,the effect of mesopore structure and spatial distribution on product distribution and Zn loading was studied.Catalysts with different mesopore spatial distribution were prepared by post-treatment of parent HZSM-5 zeolite,including NaOH treatment,tetra-propylammonium hydroxide(TPAOH)treatment,and recrystallization.It was found the evenly distributed mesopore mainly prolongs the catalyst lifetime by enhancing diffusion properties but reduces the aromatics selectivity,as a result of damage of micropores close to the catalyst surface.While the selectivity of high-value xylene can be highly promoted when the mesopore is mainly distributed interior the catalyst.Besides,the state of loaded Zn was also affected by mesopores spatial distribution.On the optimized catalyst,the xylene selectivity was enhanced by 12.4%compared with conventional Zn-loaded parent HZSM-5 catalyst at conversion over 99%.It was attributed to the synergy effect of mesopores spatial distribution and optimized acid properties.This work reveals the role of mesopores in different spatial positions of 1-hexene aromatization catalysts in the reaction process and the influence on metal distribution,as well as their synergistic effect two on the improvement of xylene selectivity,which can improve our understanding of catalyst pore structure and be helpful for the rational design of high-efficient catalyst.
基金We thank the Natural Science Foundation of Shanxi Province(202103021224439)National Natural Science Foundation of China(22075308)for financial support.
文摘The aromatic compounds,including o-xylene,m-xylene,p-xylene,and ethylbenzene,primarily originate from the catalytic reforming of crude oil,and have a wide variety of applications.However,because of similar physical and chemical properties,these compounds are difficult to be identified by gas chromatography(GC)without standard samples.With the development of modern nuclear magnetic resonance(NMR)techniques,NMR has emerged as a powerful and efficient tool for the rapid analysis of complex and crude mixtures without purification.In this study,the parameters of one-dimensional(1D)total correlation spectroscopy(TOCSY)NMR techniques,including 1D selective gradient TOCSY and 1D chemicalshift-selective filtration(CSSF)with TOCSY,were optimized to obtain comprehensive molecular structure information.The results indicate that the overlapped signals in NMR spectra of nonpolar aromatic compounds(including o-xylene,m-xylene,p-xylene and ethylbenzene),polar aromatic compounds(benzyl alcohol,benzaldehyde,benzoic acid),and aromatic compounds with additional conjugated bonds(styrene)can be resolved in 1D TOCSY.More importantly,full molecular structures can be clearly distinguished by setting appropriate mixing time in 1D TOCSY.This approach simplifies the NMR spectra,provides structural information of entire molecules,and can be applied for the analysis of other structural isomers.
基金supported by the University of Macao Research Committee and the Macao Science and Technology Development Fund
文摘Four pure cultures were isolated from soil samples potentially contaminated with gasoline compounds either at a construction site near a gas station in Fai Chi Kei,Macao SAR or in the northern parts of China（Beijing,and Hebei and Shandong）.The effects of different concentrations of benzene,toluene,ethylbenzene,and three isomers（ortho-,meta-,and para-） of xylene（BTEX）,total petroleum hydrocarbons（TPH）,and trichloroethylene（TCE）,when they were present in mixtures,on the bio-removal effciencies of microbial isolates were investigated,together with their interactions during the bio-removal process.When the isolates were tested for the BTEX（50-350 mg/L）/TPH（2000 mg/L） mixture,BTEoX in BTEoX/TPH mixture was shown with higher bio-removal effciencies,while BTEmX in BTEmX/TPH mixture was shown with the lowest,regardless of isolates.The TPH in BTEmX/TPH mixture,on the other hand,were generally shown with higher bio-removal effciencies compared to when TPH mixed with BTEoX and BTEpX.When these BTEX mixtures（at 350 mg/L） were present with TCE（5-50 mg/L）,the stimulatory effect of TCE toward BTEoX bio-removal was observed for BTEoX/TCE mixture,while the inhibitory effect of TCE toward BTEmX for BTEmX/TCE mixture.The bio-removal effciency for TPH was shown lower in TPH（2000 mg/L）/TCE（5-50 mg/L） mixtures compared to TPH present alone,implying the inhibitory effect of TCE toward TPH bio-removal.For the mixture of BTEX（417 mg/L）,TPH（2000 mg/L） along with TCE（5- 50 mg/L）,TCE was shown co-metabolically removed more effciently at 15 mg/L,probably utilizing BTEX and/or TPH as primary substrates.
基金supported by research grants from the National Natural Science Foundation of China[No.81474929]。
文摘Objective This study was designed to conduct a retrospective and systematic occupational health risk assessment(OHRA)of enterprises that used benzene,toluene,and xylene(BTX)in Shanghai,China.Methods All data for the study were obtained from 1,705 occupational health examination and evaluation reports from 2013 to 2017,and a semiquantitative model following Chinese OHRA guidelines(GBZ/T 298-2017)was applied for the assessment.Results The selected enterprises using BTX were mainly involved in manufacturing of products.Using the exposure level method,health risk levels associated with exposure to BTX were classified as medium,negligible,or low.However,the risk levels associated with benzene and toluene were significantly different according to job types,with gluers and inkers exhibiting greater health risks.For the same job type,the health risk levels assessed using the comprehensive index method were higher than those using the exposure level method.Conclusion Our OHRA reveals that workers who are exposed to BTX still face excessive health risk.Additionally,the risk level varied depending on job categories and exposure to specific chemicals.Therefore,additional control measures recommended by OHRA guidelines are essential to reduce worker exposure levels.
文摘Toluene methylation with methanol on H‐ZSM‐5(Z5)zeolite for the directional transformation of toluene to xylene has been industrialized.However,great challenges remain because of the high energy barrier of methanol deprotonation to the methoxy group,the side reaction of methanol to olefins,coke formation,and the deactivation of zeolites.Herein,we report the toluene methylation coupled with CO hydrogenation to showcase an enhancement in para‐xylene(PX)selectivity by employing a bifunctional catalyst composed of ZnZrO_(x)(ZZO)and modified Z5.The results showed that a PX selectivity of up to 81.8%in xylene and xylene selectivity of 64.8%in hydrocarbons at 10.3%toluene conversion can be realized over the bifunctional catalyst on a fixed‐bed reactor.The selectivity of gaseous hydrocarbons decreased to 10.9%,and approximately half of that was observed in methanol reagent route where the PX selectivity in xylene was 38.8%.We observed that the acid strength,the quantity ratio of Brönsted and Lewis acid sites,and the pore size of zeolites were essential for the PX selectivity.The investigation of the H_(2)/D_(2) kinetic isotope effect revealed that the newborn methyl group in xylene resulted from the hydrogenation of CO rather than toluene disproportionation.Furthermore,the catalyst showed no evident deactivation within the 100 h stability test.The findings offer a promising route for the production of value‐added PX with high selectivity via toluene methylation coupled with syngas conversion.
基金financed by BIPC,Mahshahr,Iran under the contract number 08-133/57665
文摘Desilication accompanied with minimum loss of crystallinity effect of a high alumina ZSM-5 zeolite on the isomerization reaction of ethylbenzene/xylene mixtures has been considered.Desilication was assessed through XRF,XRD,FTIR,TEM,nitrogen adsorption/desorption,NH_3-TPD,^(29)Si and^(27)Al MAS NMR analytical techniques.Desilication was accompanied with the creation of super acid sites.There exists a limit(Si/Al molar ratio of9.67)for keeping high crystallinity and obtaining improved catalytic performance.Desilication promotes ethylbenzene conversion by disproportionation and trans-alkylation reactions while the same reactions are limited for the xylene isomers.The p-xylene approach to equilibrium improves by more than 7% at 400℃ and a WHSV of 2 h^(-1)for the optimum sample with respect to the parent zeolite.At the same conditions,the optimum sample exhibits the maximum ethylbenzene conversion of 89%,i.e.more than 40%w.r.t.of the parent zeolite.However,the xylene yield decreases only 3%.
文摘The solid-liquid equilibria of musk ketone + musk xylene, musk xylene +l,3-dimethyl-2,4-dinitro-5-tert-butyl benzene are measured by differential scanning calorimeter (DSC), these systems are proved to be simple eutectics. Moreover the melting points and the fusion enthalpies of musk ketone, musk xylene and 1,3-dimethyl-2,4-dinitro-5-tert-butyl benzene are also measured by the DSC. These solid-liquid equilibrium data and the heats of fusion are reported for the first time. Then UNIFAC model is used to correlate the sofid-liquid equilibrium data. It is shown that the solid-liquid equilibria of musk systems can be predicted by the UNIFAC model.
文摘Musk xylene（MX） is frequently used as fragrances in formulation of personal care products. Quantification of a bound 4-amino- MX（4-AMX） as cysteine adducts in trout hemoglobin（Hb） was made by gas chromatography-ion trap-mass spectrometry（GC/MS）. The Hb samples were collected from trout after 24 h exposure to MX at 10μg/g, and or menhaden oil（control）. The formation of cysteine-Hb adduct was observed from nitroso derivative of MX, released by alkaline hydrolysis. The released 4-AMX metabolite was extracted in n- hexane. The extract was then reduced by evaporation, and analyzed by GC/MS. When similar agreement of mass spectral features and retention time of 4-AMX were obtained in both standard and sample solutions, the presence of 4-AMX metabolite in the Hb was confirmed. The concentration of 4-AMX was found to be 3.1 × 10^-6 6.9 × 10^-6 mg/g in the Hb solution. Quantitation was made based on an internal standard, a calibration plot, and response factor. In the non-hydrolyzed and laboratory blank extracts, the 4-AMX metabolite was not detected. Additionally, coeluting and interfefing ions were observed in the biological samples.
文摘MIL-125 is a metal-organic framework with great potential for the adsorption and separation of xylene isomers.However,MIL-125 is usually synthesized under anhydrous and anaerobic conditions.In this study,homogeneously shaped and highly crystalline MIL-125 was synthesized by introducing water-resistant titanium-containing oligomers into the synthesis process.With the assistance of the novel oligomers,MIL-125 can be synthesized in the presence of water,which meets batch-production requirements.The adsorption separation performance of the obtained highly crystalline MIL-125 was also significantly enhanced.The para-xylene/meta-xylene selectivity can reach 13.5 in mesitylene,which is higher than the selectivity values of most previously reported para-selective adsorbents.The MIL-125 xylene separation performance was verified using both batch adsorption and breakthrough experiments in the liquid phase.In addition,the influence of the solvent effect was evaluated through microcalorimetric experiments,liquid-phase adsorption experiments,and theoretical calculations.
文摘The ternary phase diagrams of musk ketone, musk xylene and various solvent were obtained by calcu- lations. Moreover, the double saturated lines were found to be curve for the first time. The methods to separate eutectic mixtures of musks by solution crystallization were suggested on the basis of these phase diagrams. A new process was proposed to get musk ketone and musk xylene from the eutectics by adding acetonitrile and heptane in turn, which was verified by experiments. Musk xylene with purity of 97.50% and musk ketone with purity of 98.10% were obtained.
基金the financial supports from the National Natural Science Foundation of China(81172204)。
文摘A bimetal-exchanged NaY zeolite(Cu(Ⅰ)-Y(Ⅲ)-Y)with a desirable adsorptive desulfurization(ADS)performance was prepared and characterized by means of X-ray diffraction,specific surface area measurements,X-ray fluorescence spectrometer,X-ray photoelectron spectroscopy,thermal gravity analysis and Fourier transform infrared spectroscopy.The effect of Y(Ⅲ)ions on ADS in the presence of the xylenes was investigated.Results indicated that the ADS performance of Y(Ⅲ)-Y is higher than that of most reported CeY.The Y(Ⅲ)-based Cu(Ⅰ)-Y(Ⅲ)-Y demonstrated the higher breakthrough loading than those of reported Ce(Ⅲ)/Ce(Ⅳ)-based transition metal Y zeolites,showing that Y(Ⅲ)ions play a promoting role in improving the ADS selectivity.For Cu(Ⅰ)-Y(Ⅲ)-Y,a new strong S-M interaction(S stands for sulfur,while M stands for metal)active site was formed,which might be caused by the synergistic effect between Cu(Ⅰ)and Y(Ⅲ).The Cu(Ⅰ)-Y(Ⅲ)-Y,which combined the advantages of Cu(I)-Y and Y(Ⅲ)-Y,is a kind of promising adsorbent.The breakthrough loading decreased in the order of Cu(Ⅰ)-Y(Ⅲ)-Y>Y(Ⅲ)-Y>Cu(Ⅰ)-Y,and the effect of xylene isomers on the sulfur removal was in the order of ortho-xylene>meta-xylene>para-xylene,which exhibited the same trend with the bond order of xylenes.
文摘The Dalian Institute of Chemical Physics of CAS has made great strides in selective oxidation studies after having performed successful commercial testing of the novel catalyst for oxidation ofparaxylene in the 100 kt/a scale.
基金Project supported by the National Nature Science Foundation of China （Grant No.50608049）, and the Shanghai Leading Aca- demic Disciplines （Grant No.T105）, and the Youth Development Foundation of Shanghai Municipal Commission of Education （Grant No.04AC107）
文摘The Bacillus firmus was immobilized into Ca-alginate beads according to the different initial biomass concentration, calcification time and activation time. Three types of immobilized Bacillus firmus beads were packed respectively in trickling biofilter to purify xylene contained waste gases, and the performance of immobilized-cell biofilter was compared with traditional biofilm attached biofilter packed with two types of ceramic pellets. The results showed that three types of immobilized beads had different capabilities for removing xylene and life-spans. Higher initial biomass in immobilized beads resulted in better performance but shorter life-span. Activation process can remarkably enhance the activity of bacteria, and the removal efficiency of xylene can substantially be improved. Calcification time had influence on life-span of immobilized beads. Without acclimation, the cell-entrapped biofilter can obtain the maximum elimination capacity of 92.4 g/（m^3·h）. However, compared with biofilm attached biofilter, it has a poorer intrinsic drawback in volatile organic compounds （VOCs） removal due to the existence of excess mass transfer resistance.
文摘An excellent separation of xylene isomers is reported using 2, 6-O-di-pentyl-3-O-acetyl-beta-CD as capillary stationary phase. The optimum conditions for the separation are also discussed.
文摘On November 30, 2018 “The technology for manufacture of xylene from toluene and methanol with coproduction of low-carbon olefins” jointly developed by the Yanchang Petroleum Group (YPG) and the CAS Dalian Institute of Chemical Physics (DICP) had passed the appraisal of research achievements. In order to open up a new In order to open up a new technical route for alkylation of toluene to p-xylene, the technical personnel of YPG and DICP have been jointly engaging in the activities for tackling key problems to set up a 10 kt/a commercial unit for producing xylene through reaction of methanol with toluene along with coproduction of low-carbon olefins.
文摘The recovery of caproic acid from the aqueous stream is of practical relevance due to its market value and the stringent environmental standards. The profound success of reactive extraction has been noted in the recovery of carboxylic acids from dilute solutions. In present paper, equilibrium of caproic acid with aliquat-336, a quaternary amine compound, in xylene and Methyl Isobutyl Ketone (MIBK) has been studied. Equilibrium parameters such as distribution coefficients, loading ratio, degree of extraction and equilibrium complexation constants have been presented. The data obtained is useful in understanding the equilibrium characteristics and efficient design of the recovery process of caproic acid by reactive extraction.
