We report on a chalcogenide glass fiber doped with Pr^(3+) that can be used for commercialized 1.5-μm and 2-μm laser excitations by emitting broadband 3 μm–5.5 μm fluorescence, which is extruded into a preform an...We report on a chalcogenide glass fiber doped with Pr^(3+) that can be used for commercialized 1.5-μm and 2-μm laser excitations by emitting broadband 3 μm–5.5 μm fluorescence, which is extruded into a preform and then drawn into a step-index fiber. The spectroscopic properties of the fiber and glass are reported, and the mid-infrared fiber lasers are also numerically investigated. Cascade lasing is employed to increase the inversion population of the upper laser level. The particle swarm approach is applied to optimize the fiber laser parameters. The output power can reach 1.28 W at 4.89-μm wavelength, with a pump power of 5 W, excitation wavelength at 2.04 μm, Pr^(3+) ion concentration at 4.22 × 10^(25) ions/m^3,fiber length at 0.94 m, and fiber background loss at 3 dB/m.展开更多
InGaSb/AlGaAsSb double-quantum-well diode lasers emitting around 2 μm are demonstrated. The AlGaAsSb barriers of the lasers are grown with digital alloy techniques consisting of binary AlSb/AlAs/GaSb short-period pai...InGaSb/AlGaAsSb double-quantum-well diode lasers emitting around 2 μm are demonstrated. The AlGaAsSb barriers of the lasers are grown with digital alloy techniques consisting of binary AlSb/AlAs/GaSb short-period pairs. Peak power conversion efficiency of 26% and an efficiency higher than 16% at 1 W are achieved at continuous-wave operation for a 2-mm-long and 100-μm-wide stripe laser. The maximum output power of a single emitter reaches to 1.4 W at 7 A.19-emitter bars with maximum efficiency higher than 20% and maximum power of 16 W are fabricated. Lasers with the short-period-pair barriers are proved to have improved temperature properties and wavelength stabilities. The characteristic temperature(T_0) is up to 140?C near room temperature(25–55?C).展开更多
We demonstrate a compact periodically poled MgO-doped lithium niobate(MgO:PPLN)-based optical parametric oscillator(OPO) quasi-synchronously pumped by a fiber laser system with burst-mode operation.The pump source is ...We demonstrate a compact periodically poled MgO-doped lithium niobate(MgO:PPLN)-based optical parametric oscillator(OPO) quasi-synchronously pumped by a fiber laser system with burst-mode operation.The pump source is a peak-power-selectable pulse-multiplied picosecond Yb fiber laser.The chirped pulses from a figure of eight-cavity modelocked fiber laser seed are narrowed to a duration of less than 50 ps using an FBG reflector and a circulator.The narrowed pulses are directed to pass through a pulse multiplier and to form pulse bunches,each of which is composed of 13 subpulses.The obtained pulse bunches are amplified by two-stage fiber pre-amplifiers:one-stage is core-pumped and the other is cladding-pumped.A fiberized acousto-optic modulator is inserted to control the pulse repetition rate(PRR) of the pulse bunches before they are power-amplified in the final amplifier stage with a large mode area(LMA) PM Yb-doped fiber.The maximum average powers from the final amplifier are 85 W,60 W,and 45 W,respectively,corresponding to the PRR of2.72 MHz,1.36 MHz,and 0.68 MHz.The amplified pulses are directed to pump an MgO:PPLN-based optical parametric oscillator(OPO).A maximum peak power at 3.45 μm is obtained approximately to be 8.4 kW.Detailed performance characteristics are presented.展开更多
Picosecond optical parametric generation and amplification in the near-infrared region within 1.361-1.656 μm and the mid-infrared region within 2.976-4.875 μm is constructed on the basis of bulk MgO:LiNbO 3 crystals...Picosecond optical parametric generation and amplification in the near-infrared region within 1.361-1.656 μm and the mid-infrared region within 2.976-4.875 μm is constructed on the basis of bulk MgO:LiNbO 3 crystals pumped at 1.064 μm.The maximum pulse energy reaches 1.3 mJ at 1.464 μm and 0.47 mJ at 3.894 μm,corresponding to a pumpto-idler photon conversion efficiency of 25%.By seeding the hard-to-measure mid-infrared radiation as the idler in the optical parametric amplification and measuring the amplified and frequency up-converted signal in the near-infrared or even visible region,one can measure very week mid-infrared radiation with ordinary detectors,which are insensitive to mid-infrared radiation,with a very high gain.A maximum gain factor of about 7 × 10 7 is achieved at the mid-infrared wavelength of 3.374 μm and the corresponding energy detection limit is as low as about 390 aJ per pulse.展开更多
A room-temperature broadly tunable mid-infrared difference frequency laser source for highly sensitive trace gas detection has been developed recently in our laboratory. The mid-infrared laser system is based on quasi...A room-temperature broadly tunable mid-infrared difference frequency laser source for highly sensitive trace gas detection has been developed recently in our laboratory. The mid-infrared laser system is based on quasi-phase-matched (QPM) difference frequency generation (DFG) in a multi- grating, temperature-controlled periodically poled LiNbO3 (PPLN) crystal and employs two near-infrared diode lasers as pump sources. The mid-infrared coherent radiation generated is tunable from 3.2 μm to 3.7 μm with an output power of about 100 μW. By changing one of the pump laser head with another wavelength range, we can readily obtain other needed mid-infrared wavelength range cover. The performance of the mid-infrared laser system and its application to highly sensitive spectroscopic detection of CH4, HCI, CH2O, and NO2 has been carried out. A multi-reflection White cell was used in the experiment gaining ppb-level sensitivity. The DFG laser system has the features of compact, room-temperature operation, narrow line-width, and broadly continuous tunable range for potential applications in industry and environmental monitoring.展开更多
A 1.7-at.%Er:CaF_(2)crystal was synthesized by temperature gradient method.The Er:CaF_(2)crystal was applied in acousto-optically Q-switched laser at mid-infrared region for the first time.Using a Te O_(2)-based cryst...A 1.7-at.%Er:CaF_(2)crystal was synthesized by temperature gradient method.The Er:CaF_(2)crystal was applied in acousto-optically Q-switched laser at mid-infrared region for the first time.Using a Te O_(2)-based crystal as Q-switcher,we obtained a laser diode(LD)end-pumped Er:CaF_(2)laser with the highest single pulse energy up to 0.49 mJ and maximum peak power of 0.56 kW under 6.34-W absorbed pump power.The implication of these results is that the low-doped Er:CaF_(2)crystal exhibits promising optical properties in solid-state lasers.展开更多
Arson presents a challenging crime scene for fire investigators worldwide. Key to the investigation of suspected arson cases is the analysis of fire debris for the presence of accelerants or ignitable liquids. This st...Arson presents a challenging crime scene for fire investigators worldwide. Key to the investigation of suspected arson cases is the analysis of fire debris for the presence of accelerants or ignitable liquids. This study has investigated the application and method development of vapor phase mid-Infrared (mid-IR) spectroscopy using a field portable quantum cascade laser (QCL) based system for the detection and identification of accelerant residues such as gasoline, diesel, and ethanol in fire debris. A searchable spectral library of various ignitable fluids and fuel components measured in the vapor phase was constructed that allowed for real-time identification of accelerants present in samples using software developed in-house. Measurement of vapors collected from paper material that had been doused with an accelerant followed by controlled burning and then extinguished with water showed that positive identification could be achieved for gasoline, diesel, and ethanol. This vapor phase mid-IR QCL method is rapid, easy to use, and has the sensitivity and discrimination capability that make it well suited for non-destructive crime scene sample analysis. Sampling and measurement can be performed in minutes with this 7.5 kg instrument. This vibrational spectroscopic method required no time-consuming sample pretreatment or complicated solvent extraction procedure. The results of this initial feasibility study demonstrate that this portable fire debris analyzer would greatly benefit arson investigators performing analysis on-site.展开更多
We report the growth, fabrication, and operation of 2.0μm InGaAsSb/AlGaAsSb laser diodes and 8.5μm GaInAs/AlInAs quantum cascade lasers with low threshold current and the latest improvements in the performance of In...We report the growth, fabrication, and operation of 2.0μm InGaAsSb/AlGaAsSb laser diodes and 8.5μm GaInAs/AlInAs quantum cascade lasers with low threshold current and the latest improvements in the performance of InGaAsSb photodetectors by passivation treatment.展开更多
We report here on a diode-pumped pulsed mid-infrared laser source based on gas-filled hollow-core fibers(HCFs)towards an all-fiber structure by the tapering method. The pump laser is coupled into an acetylene-filled H...We report here on a diode-pumped pulsed mid-infrared laser source based on gas-filled hollow-core fibers(HCFs)towards an all-fiber structure by the tapering method. The pump laser is coupled into an acetylene-filled HCF through a tapered single-mode fiber. By precisely tuning the wavelength of the diode to match different absorption lines of acetylene near 1.5 μm, mid-infrared emission around 3.1–3.2 μm is generated. With 2 m HCFs and3 mbar acetylene gas, a maximum average power of 130 m W is obtained with a laser slope efficiency of ~24%.This work provides a potential scheme for all-fiber mid-infrared fiber gas lasers.展开更多
The optical parametric oscillator (OPO) based on the periodically poled lithium tantalate (PPLT) crystal (40 mm×5 mm×1 mm) is fabricated. The OPO is pumped by a Q-switched Nd:YAG laser working at 1.064 μm. ...The optical parametric oscillator (OPO) based on the periodically poled lithium tantalate (PPLT) crystal (40 mm×5 mm×1 mm) is fabricated. The OPO is pumped by a Q-switched Nd:YAG laser working at 1.064 μm. An average idler output power (around 3.8 μm) of 1.2 W and signal output power (around 1.48 μm) of 3 W are obtained when the pump power is 20 W.展开更多
A multidisciplinary approach for the production and characterization of a series of high concentration Er3+activated SrLaGa3 O7(abbreviated as Er:SLGO)crystal fibers is shown to have a great promise for implementation...A multidisciplinary approach for the production and characterization of a series of high concentration Er3+activated SrLaGa3 O7(abbreviated as Er:SLGO)crystal fibers is shown to have a great promise for implementation in mid-infrared laser applications.The current approach includes the design and formation of unique layered tetrahedral network structures with several kinds of rare earth(RE)ions including Er ions distributing statistically between layers,such as Er:SLGO,Er,Nd:SLGO,Er,Yb,Ho:SLGO,Er,Eu:SLGO and Er,Ho:SLGO.Five kinds of Er:SLGO crystal fibers were designed to grow via a micropulling down method.Spectroscopic analyses show that Er,Yb,Ho:SLGO and Nd,Er:SLGO crystal fibers were superiorly endowed with inhomogeneous broadening absorption and strong emission.The unique structural components design enables the generation of improved absorption and emission recombination,and the inhibition of self-termination as well.Generally,the use of structural components design may warrant high-efficiency emissions in RE-doped crystal fibers.展开更多
High-power intense optical sources in the mid-to-long wavelength infrared region are very attractive for a wide range of fields from fundamental research to materials science and biology applications.However,there are...High-power intense optical sources in the mid-to-long wavelength infrared region are very attractive for a wide range of fields from fundamental research to materials science and biology applications.However,there are still significant challenges in extending long-wavelength infrared pulses into the relativistic regime using conventional optical techniques.Here,based upon a new type of plasma-based optical method,we present an efficient scheme capable of combining several high-power long-wavelength infrared laser pulses into one single,more intense pulse,thus bringing the intensity of the output pulse to the relativistic regime.Such intense infrared pulses will open up new possibilities for strong-field physics and ultrafast applications.Furthermore,this is beneficial to understand the underlying physics and nonlinear processes of modulation,propagation and energy transfer of high-power intense laser pulses in plasmas.展开更多
We experimentally investigate the generation of above-threshold harmonics completely from argon atoms on an excited state using mid-infrared femtosecond laser pulses. The highly nonlinear dependences of the observed s...We experimentally investigate the generation of above-threshold harmonics completely from argon atoms on an excited state using mid-infrared femtosecond laser pulses. The highly nonlinear dependences of the observed signal on the pulse energy and polarization of the probe laser pulses indicate its nonperturbative characteristic.展开更多
With the development of mid-infrared (MIR) photoelectric devices, mid-infrared spectroscopy has become one of the important methods for non-invasive detection of blood glucose. The mid-infrared region (4000 - 400 cm&l...With the development of mid-infrared (MIR) photoelectric devices, mid-infrared spectroscopy has become one of the important methods for non-invasive detection of blood glucose. The mid-infrared region (4000 - 400 cm<sup>-1</sup>) has the well-known fingerprint region (1200 - 800 cm<sup>-1</sup>) of glucose, which has clearer characteristic absorption peaks and better specificity. There is a lot of molecular information about glucose in the MIR. The non-invasive detection of blood glucose by mid-infrared spectroscopy needs to achieve certain accuracy, and the quantitative model is an important factor affecting the accuracy of glucose detection. In this paper, the samples of imitation solution containing only glucose and the samples of imitation mixed solution are taken as the research objects, and the mid-infrared spectral data of the samples are collected. The full spectrum partial least squares Regression (PLSR) model, SNV + Ctr-PLSR model, MSC + Ctr-PLSR model, and convolutional neural networks (CNN) model of 3000 - 900 cm<sup>-1</sup> band were constructed. Full spectrum PLS model and CNN model of 1200 - 900 cm<sup>-1</sup> band were constructed. The experimental results show that the optimal model of the two bands is CNN, then the correlation coefficient of prediction set (Rp) of 3000 - 900 cm<sup>-1</sup> band is 0.95, and the root mean square error of pre-diction set (RMSEP) value is 22.10. The Rp of 1200 - 900 cm<sup>-1</sup> band is 0.95, and the RMSEP value is 22.54. The research results show that CNN is a promising method, which has higher accuracy than PLSR, and is especially suitable for modeling human complex environment. In addition, the study provides a theoretical and practical basis for CNN in feature selection and model interpretation.展开更多
Laser anti-drone technology is entering the sequence of actual combat,and it is necessary to consider the vulnerability of typical functional parts of UAVs.Since the concept of"vulnerability"was proposed,a v...Laser anti-drone technology is entering the sequence of actual combat,and it is necessary to consider the vulnerability of typical functional parts of UAVs.Since the concept of"vulnerability"was proposed,a variety of analysis programs for battlefield targets to traditional weapons have been developed,but a comprehensive assessment methodology for targets'vulnerability to laser is still missing.Based on the shotline method,this paper proposes a method that equates laser beam to shotline array,an efficient vulnerability analysis program of target to laser is established by this method,and the program includes the circuit board and the wire into the vulnerability analysis category,which improves the precision of the vulnerability analysis.Taking the UAV engine part as the target of vulnerability analysis,combine with the"life-death unit method"to calculate the laser penetration rate of various materials of the UAV,and the influence of laser weapon system parameters and striking orientation on the killing probability is quantified after introducing the penetration rate into the vulnerability analysis program.The quantitative analysis method proposed in this paper has certain general expansibility,which can provide a fresh idea for the vulnerability analysis of other targets to laser.展开更多
We demonstrated the~2.8-μm and~3.5-μm linearly polarized continuous wave(CW)laser outputs from a polarization-maintaining(PM)Er^(3+)-doped fluoride fiber laser.By introducing a film polarizer into the cavity to sele...We demonstrated the~2.8-μm and~3.5-μm linearly polarized continuous wave(CW)laser outputs from a polarization-maintaining(PM)Er^(3+)-doped fluoride fiber laser.By introducing a film polarizer into the cavity to select the laser polarization orientation,the~2.8-μm linearly polarized CW laser with a high polarization extinction ratio(PER)of~23 dB and maximum output power of 2.37 W was achieved under double-end pumping at 976 nm.By adding another 1981-nm pump source simultaneously,the~3.5-μm linearly polarized CW laser was also obtained,giving higher PER of~27 dB and maximum output power of 307 mW which is only limited by the available power of 1981-nm pump.To the best of our knowledge,this is the first report on a mid-infrared linearly polarized CW PM fiber laser in the>2.5-μm mid-infrared region.This work not only opens up opportunities for some new mid-infrared applications,but also provides a promising platform for developing high-stability and versatile mid-infrared laser sources.展开更多
In the past few years,many groups have focused on the research and development of GaN-based ultraviolet laser diodes(UV LDs).Great progresses have been achieved even though many challenges exist.In this article,we ana...In the past few years,many groups have focused on the research and development of GaN-based ultraviolet laser diodes(UV LDs).Great progresses have been achieved even though many challenges exist.In this article,we analyze the challenges of developing GaN-based ultraviolet laser diodes,and the approaches to improve the performance of ultraviolet laser diode are reviewed.With these techniques,room temperature(RT)pulsed oscillation of AlGaN UVA(ultraviolet A)LD has been realized,with a lasing wavelength of 357.9 nm.Combining with the suppression of thermal effect,the high output power of 3.8 W UV LD with a lasing wavelength of 386.5 nm was also fabricated.展开更多
We report a high-average-power acousto-optic(AO)Q-switched intracavity frequency-doubled red laser based on a high-efficiency light-emitting-diode(LED)pumped two-rod Nd,Ce:YAG laser module.Under quasi-continuous wave ...We report a high-average-power acousto-optic(AO)Q-switched intracavity frequency-doubled red laser based on a high-efficiency light-emitting-diode(LED)pumped two-rod Nd,Ce:YAG laser module.Under quasi-continuous wave operation conditions,a maximum output power of 1319.08 nm wavelength was achieved at 11.26 W at a repetition rate of 100 Hz.展开更多
The 975 nm multimode diode lasers with high-order surface Bragg diffraction gratings have been simulated and calcu-lated using the 2D finite difference time domain(FDTD)algorithm and the scattering matrix method(SMM)....The 975 nm multimode diode lasers with high-order surface Bragg diffraction gratings have been simulated and calcu-lated using the 2D finite difference time domain(FDTD)algorithm and the scattering matrix method(SMM).The periods and etch depth of the grating parameters have been optimized.A board area laser diode(BA-LD)with high-order diffraction grat-ings has been designed and fabricated.At output powers up to 10.5 W,the measured spectral width of full width at half maxi-mum(FWHM)is less than 0.5 nm.The results demonstrate that the designed high-order surface gratings can effectively nar-row the spectral width of multimode semiconductor lasers at high output power.展开更多
基金Project supported by the Young Scientists Fund of the National Natural Science Foundation of China(Grant No.61605095)the Natural Science Foundation of Zhejiang Province,China(Grant No.LY19F050004)+2 种基金the Natural Science Foundation of Ningbo City(Grant No.2015A610038)the Open Fund of the Guangdong Engineering Technology Research and Development Center of Special Optical Fiber Materials and Devices(South China University of Technology)(Grant No.2016-4)the K C Wong Magna Fund at Ningbo University
文摘We report on a chalcogenide glass fiber doped with Pr^(3+) that can be used for commercialized 1.5-μm and 2-μm laser excitations by emitting broadband 3 μm–5.5 μm fluorescence, which is extruded into a preform and then drawn into a step-index fiber. The spectroscopic properties of the fiber and glass are reported, and the mid-infrared fiber lasers are also numerically investigated. Cascade lasing is employed to increase the inversion population of the upper laser level. The particle swarm approach is applied to optimize the fiber laser parameters. The output power can reach 1.28 W at 4.89-μm wavelength, with a pump power of 5 W, excitation wavelength at 2.04 μm, Pr^(3+) ion concentration at 4.22 × 10^(25) ions/m^3,fiber length at 0.94 m, and fiber background loss at 3 dB/m.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61790580 and 61435012)the National Basic Research Program of China(Grant No.2014CB643903)the Scientific Instrument Developing Project of the Chinese Academy of Sciences(Grant No.YJKYYQ20170032)
文摘InGaSb/AlGaAsSb double-quantum-well diode lasers emitting around 2 μm are demonstrated. The AlGaAsSb barriers of the lasers are grown with digital alloy techniques consisting of binary AlSb/AlAs/GaSb short-period pairs. Peak power conversion efficiency of 26% and an efficiency higher than 16% at 1 W are achieved at continuous-wave operation for a 2-mm-long and 100-μm-wide stripe laser. The maximum output power of a single emitter reaches to 1.4 W at 7 A.19-emitter bars with maximum efficiency higher than 20% and maximum power of 16 W are fabricated. Lasers with the short-period-pair barriers are proved to have improved temperature properties and wavelength stabilities. The characteristic temperature(T_0) is up to 140?C near room temperature(25–55?C).
基金supported by the National Natural Science Foundation of China(Grant No.61078015)the National Basic Research Program of China(Grant No.2011CB311803)
文摘We demonstrate a compact periodically poled MgO-doped lithium niobate(MgO:PPLN)-based optical parametric oscillator(OPO) quasi-synchronously pumped by a fiber laser system with burst-mode operation.The pump source is a peak-power-selectable pulse-multiplied picosecond Yb fiber laser.The chirped pulses from a figure of eight-cavity modelocked fiber laser seed are narrowed to a duration of less than 50 ps using an FBG reflector and a circulator.The narrowed pulses are directed to pass through a pulse multiplier and to form pulse bunches,each of which is composed of 13 subpulses.The obtained pulse bunches are amplified by two-stage fiber pre-amplifiers:one-stage is core-pumped and the other is cladding-pumped.A fiberized acousto-optic modulator is inserted to control the pulse repetition rate(PRR) of the pulse bunches before they are power-amplified in the final amplifier stage with a large mode area(LMA) PM Yb-doped fiber.The maximum average powers from the final amplifier are 85 W,60 W,and 45 W,respectively,corresponding to the PRR of2.72 MHz,1.36 MHz,and 0.68 MHz.The amplified pulses are directed to pump an MgO:PPLN-based optical parametric oscillator(OPO).A maximum peak power at 3.45 μm is obtained approximately to be 8.4 kW.Detailed performance characteristics are presented.
基金Project supported by the National Natural Science Foundation of China (Grant No. 61078005)the National Basic ResearchProgram of China (Grant No. 2007CB613205)the China Postdoctoral Science Foundation
文摘Picosecond optical parametric generation and amplification in the near-infrared region within 1.361-1.656 μm and the mid-infrared region within 2.976-4.875 μm is constructed on the basis of bulk MgO:LiNbO 3 crystals pumped at 1.064 μm.The maximum pulse energy reaches 1.3 mJ at 1.464 μm and 0.47 mJ at 3.894 μm,corresponding to a pumpto-idler photon conversion efficiency of 25%.By seeding the hard-to-measure mid-infrared radiation as the idler in the optical parametric amplification and measuring the amplified and frequency up-converted signal in the near-infrared or even visible region,one can measure very week mid-infrared radiation with ordinary detectors,which are insensitive to mid-infrared radiation,with a very high gain.A maximum gain factor of about 7 × 10 7 is achieved at the mid-infrared wavelength of 3.374 μm and the corresponding energy detection limit is as low as about 390 aJ per pulse.
基金supported by National Natural Science Foundation of China under Grant No. 50534050the Key Project of the Chinese Academy of Sciences under Grant No. KJCX2-SW-W27.
文摘A room-temperature broadly tunable mid-infrared difference frequency laser source for highly sensitive trace gas detection has been developed recently in our laboratory. The mid-infrared laser system is based on quasi-phase-matched (QPM) difference frequency generation (DFG) in a multi- grating, temperature-controlled periodically poled LiNbO3 (PPLN) crystal and employs two near-infrared diode lasers as pump sources. The mid-infrared coherent radiation generated is tunable from 3.2 μm to 3.7 μm with an output power of about 100 μW. By changing one of the pump laser head with another wavelength range, we can readily obtain other needed mid-infrared wavelength range cover. The performance of the mid-infrared laser system and its application to highly sensitive spectroscopic detection of CH4, HCI, CH2O, and NO2 has been carried out. A multi-reflection White cell was used in the experiment gaining ppb-level sensitivity. The DFG laser system has the features of compact, room-temperature operation, narrow line-width, and broadly continuous tunable range for potential applications in industry and environmental monitoring.
基金the National Natural Science Foundation of China(Grant Nos.11974220,61925508,61905265,and 12104271)the Natural Science Foundation of Shandong Province,China(Grant Nos.ZR2021LLZ008 and ZR2021QA030)+1 种基金the Fund from Science and Technology Commission of Shanghai Municipality(Grant No.20511107400)CAS Interdisciplinary Innovation Team(Grant No.JCTD-2019-12).
文摘A 1.7-at.%Er:CaF_(2)crystal was synthesized by temperature gradient method.The Er:CaF_(2)crystal was applied in acousto-optically Q-switched laser at mid-infrared region for the first time.Using a Te O_(2)-based crystal as Q-switcher,we obtained a laser diode(LD)end-pumped Er:CaF_(2)laser with the highest single pulse energy up to 0.49 mJ and maximum peak power of 0.56 kW under 6.34-W absorbed pump power.The implication of these results is that the low-doped Er:CaF_(2)crystal exhibits promising optical properties in solid-state lasers.
文摘Arson presents a challenging crime scene for fire investigators worldwide. Key to the investigation of suspected arson cases is the analysis of fire debris for the presence of accelerants or ignitable liquids. This study has investigated the application and method development of vapor phase mid-Infrared (mid-IR) spectroscopy using a field portable quantum cascade laser (QCL) based system for the detection and identification of accelerant residues such as gasoline, diesel, and ethanol in fire debris. A searchable spectral library of various ignitable fluids and fuel components measured in the vapor phase was constructed that allowed for real-time identification of accelerants present in samples using software developed in-house. Measurement of vapors collected from paper material that had been doused with an accelerant followed by controlled burning and then extinguished with water showed that positive identification could be achieved for gasoline, diesel, and ethanol. This vapor phase mid-IR QCL method is rapid, easy to use, and has the sensitivity and discrimination capability that make it well suited for non-destructive crime scene sample analysis. Sampling and measurement can be performed in minutes with this 7.5 kg instrument. This vibrational spectroscopic method required no time-consuming sample pretreatment or complicated solvent extraction procedure. The results of this initial feasibility study demonstrate that this portable fire debris analyzer would greatly benefit arson investigators performing analysis on-site.
文摘We report the growth, fabrication, and operation of 2.0μm InGaAsSb/AlGaAsSb laser diodes and 8.5μm GaInAs/AlInAs quantum cascade lasers with low threshold current and the latest improvements in the performance of InGaAsSb photodetectors by passivation treatment.
基金supported by the Outstanding Youth Science Fund Project of Hunan Provincial Natural Science Foundation(No.2019JJ20023)the National Natural Science Foundation of China(NSFC)(No.61705266)
文摘We report here on a diode-pumped pulsed mid-infrared laser source based on gas-filled hollow-core fibers(HCFs)towards an all-fiber structure by the tapering method. The pump laser is coupled into an acetylene-filled HCF through a tapered single-mode fiber. By precisely tuning the wavelength of the diode to match different absorption lines of acetylene near 1.5 μm, mid-infrared emission around 3.1–3.2 μm is generated. With 2 m HCFs and3 mbar acetylene gas, a maximum average power of 130 m W is obtained with a laser slope efficiency of ~24%.This work provides a potential scheme for all-fiber mid-infrared fiber gas lasers.
基金supported by the National Natural Science Foundation of China (Grant No. 10534020)the National Key Projects for Basic Research of China (Grant No. 2006CB921804)
文摘The optical parametric oscillator (OPO) based on the periodically poled lithium tantalate (PPLT) crystal (40 mm×5 mm×1 mm) is fabricated. The OPO is pumped by a Q-switched Nd:YAG laser working at 1.064 μm. An average idler output power (around 3.8 μm) of 1.2 W and signal output power (around 1.48 μm) of 3 W are obtained when the pump power is 20 W.
基金Project supported by National Natural Science Foundation of China(51832007,51472240,51872286,61675204)Science and Technology Plan Leading Project of Fujian Province(2018H0046)+1 种基金State Key Laboratory of Rare Earth Resource Utilization(RERU2018004,Changchun Institute of Applied Chemistry,Chinese Academy of Sciences)the National Key Research and Development Program of China(2016YFB0701002)。
文摘A multidisciplinary approach for the production and characterization of a series of high concentration Er3+activated SrLaGa3 O7(abbreviated as Er:SLGO)crystal fibers is shown to have a great promise for implementation in mid-infrared laser applications.The current approach includes the design and formation of unique layered tetrahedral network structures with several kinds of rare earth(RE)ions including Er ions distributing statistically between layers,such as Er:SLGO,Er,Nd:SLGO,Er,Yb,Ho:SLGO,Er,Eu:SLGO and Er,Ho:SLGO.Five kinds of Er:SLGO crystal fibers were designed to grow via a micropulling down method.Spectroscopic analyses show that Er,Yb,Ho:SLGO and Nd,Er:SLGO crystal fibers were superiorly endowed with inhomogeneous broadening absorption and strong emission.The unique structural components design enables the generation of improved absorption and emission recombination,and the inhibition of self-termination as well.Generally,the use of structural components design may warrant high-efficiency emissions in RE-doped crystal fibers.
基金the National Postdoctoral Program for Innovative Talents of China(No.BX20220206)。
文摘High-power intense optical sources in the mid-to-long wavelength infrared region are very attractive for a wide range of fields from fundamental research to materials science and biology applications.However,there are still significant challenges in extending long-wavelength infrared pulses into the relativistic regime using conventional optical techniques.Here,based upon a new type of plasma-based optical method,we present an efficient scheme capable of combining several high-power long-wavelength infrared laser pulses into one single,more intense pulse,thus bringing the intensity of the output pulse to the relativistic regime.Such intense infrared pulses will open up new possibilities for strong-field physics and ultrafast applications.Furthermore,this is beneficial to understand the underlying physics and nonlinear processes of modulation,propagation and energy transfer of high-power intense laser pulses in plasmas.
基金supported by the National Basic Research Program of China (No. 2014CB921300)the National Natural Science Foundation of China (Nos. 11127901, 11134010, 61575211, 11304330, 11404357, 61405220, 61605227, and 61705034)the Shanghai ‘Yang Fan’ Program (Nos. 14YF1406100 and 16YF1412700)
文摘We experimentally investigate the generation of above-threshold harmonics completely from argon atoms on an excited state using mid-infrared femtosecond laser pulses. The highly nonlinear dependences of the observed signal on the pulse energy and polarization of the probe laser pulses indicate its nonperturbative characteristic.
文摘With the development of mid-infrared (MIR) photoelectric devices, mid-infrared spectroscopy has become one of the important methods for non-invasive detection of blood glucose. The mid-infrared region (4000 - 400 cm<sup>-1</sup>) has the well-known fingerprint region (1200 - 800 cm<sup>-1</sup>) of glucose, which has clearer characteristic absorption peaks and better specificity. There is a lot of molecular information about glucose in the MIR. The non-invasive detection of blood glucose by mid-infrared spectroscopy needs to achieve certain accuracy, and the quantitative model is an important factor affecting the accuracy of glucose detection. In this paper, the samples of imitation solution containing only glucose and the samples of imitation mixed solution are taken as the research objects, and the mid-infrared spectral data of the samples are collected. The full spectrum partial least squares Regression (PLSR) model, SNV + Ctr-PLSR model, MSC + Ctr-PLSR model, and convolutional neural networks (CNN) model of 3000 - 900 cm<sup>-1</sup> band were constructed. Full spectrum PLS model and CNN model of 1200 - 900 cm<sup>-1</sup> band were constructed. The experimental results show that the optimal model of the two bands is CNN, then the correlation coefficient of prediction set (Rp) of 3000 - 900 cm<sup>-1</sup> band is 0.95, and the root mean square error of pre-diction set (RMSEP) value is 22.10. The Rp of 1200 - 900 cm<sup>-1</sup> band is 0.95, and the RMSEP value is 22.54. The research results show that CNN is a promising method, which has higher accuracy than PLSR, and is especially suitable for modeling human complex environment. In addition, the study provides a theoretical and practical basis for CNN in feature selection and model interpretation.
基金National Natural Science Foundation of China(Grant Nos.62005276,62175234)the Scientific and Technological Development Program of Jilin,China(Grant No.20230508111RC)to provide fund for this research。
文摘Laser anti-drone technology is entering the sequence of actual combat,and it is necessary to consider the vulnerability of typical functional parts of UAVs.Since the concept of"vulnerability"was proposed,a variety of analysis programs for battlefield targets to traditional weapons have been developed,but a comprehensive assessment methodology for targets'vulnerability to laser is still missing.Based on the shotline method,this paper proposes a method that equates laser beam to shotline array,an efficient vulnerability analysis program of target to laser is established by this method,and the program includes the circuit board and the wire into the vulnerability analysis category,which improves the precision of the vulnerability analysis.Taking the UAV engine part as the target of vulnerability analysis,combine with the"life-death unit method"to calculate the laser penetration rate of various materials of the UAV,and the influence of laser weapon system parameters and striking orientation on the killing probability is quantified after introducing the penetration rate into the vulnerability analysis program.The quantitative analysis method proposed in this paper has certain general expansibility,which can provide a fresh idea for the vulnerability analysis of other targets to laser.
基金supported by the National Natural Science Foundation of China under Grant No.62005040the Fundamental Research Funds for the Central Universities under Grant No.ZYGX2020KYQD003the Science and Technology Project of Sichuan Province under Grant No.2021YJ0368.
文摘We demonstrated the~2.8-μm and~3.5-μm linearly polarized continuous wave(CW)laser outputs from a polarization-maintaining(PM)Er^(3+)-doped fluoride fiber laser.By introducing a film polarizer into the cavity to select the laser polarization orientation,the~2.8-μm linearly polarized CW laser with a high polarization extinction ratio(PER)of~23 dB and maximum output power of 2.37 W was achieved under double-end pumping at 976 nm.By adding another 1981-nm pump source simultaneously,the~3.5-μm linearly polarized CW laser was also obtained,giving higher PER of~27 dB and maximum output power of 307 mW which is only limited by the available power of 1981-nm pump.To the best of our knowledge,this is the first report on a mid-infrared linearly polarized CW PM fiber laser in the>2.5-μm mid-infrared region.This work not only opens up opportunities for some new mid-infrared applications,but also provides a promising platform for developing high-stability and versatile mid-infrared laser sources.
基金This work was supported by the National Key R&D Program of China(2022YFB3605104)National Natural Science Foundation of China(62250038,61904172,61974162,62034008,62074142,and 62074140)+1 种基金Strategic Priority Research Program of Chinese Academy of Sciences(XDB43030101)Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering(2022SX-TD016).
文摘In the past few years,many groups have focused on the research and development of GaN-based ultraviolet laser diodes(UV LDs).Great progresses have been achieved even though many challenges exist.In this article,we analyze the challenges of developing GaN-based ultraviolet laser diodes,and the approaches to improve the performance of ultraviolet laser diode are reviewed.With these techniques,room temperature(RT)pulsed oscillation of AlGaN UVA(ultraviolet A)LD has been realized,with a lasing wavelength of 357.9 nm.Combining with the suppression of thermal effect,the high output power of 3.8 W UV LD with a lasing wavelength of 386.5 nm was also fabricated.
基金Nanjing University of Posts and Telecommunications Foundation(Grant Nos.JUH219002 and JUH219007)Key Laboratory of Functional Crystals and Laser Technology,TIPC,CAS Foundation(Grant No.FCLT 202201)。
文摘We report a high-average-power acousto-optic(AO)Q-switched intracavity frequency-doubled red laser based on a high-efficiency light-emitting-diode(LED)pumped two-rod Nd,Ce:YAG laser module.Under quasi-continuous wave operation conditions,a maximum output power of 1319.08 nm wavelength was achieved at 11.26 W at a repetition rate of 100 Hz.
基金supported by the National Key R&D Program of China,No.2022YFB4601201.
文摘The 975 nm multimode diode lasers with high-order surface Bragg diffraction gratings have been simulated and calcu-lated using the 2D finite difference time domain(FDTD)algorithm and the scattering matrix method(SMM).The periods and etch depth of the grating parameters have been optimized.A board area laser diode(BA-LD)with high-order diffraction grat-ings has been designed and fabricated.At output powers up to 10.5 W,the measured spectral width of full width at half maxi-mum(FWHM)is less than 0.5 nm.The results demonstrate that the designed high-order surface gratings can effectively nar-row the spectral width of multimode semiconductor lasers at high output power.