[Objectives] Response surface analysis methodology was used to optimize the extraction technology of total flavonoids from Mallotus apelta leaves. [Methods] The total flavonoids were extracted using ultrasonic assiste...[Objectives] Response surface analysis methodology was used to optimize the extraction technology of total flavonoids from Mallotus apelta leaves. [Methods] The total flavonoids were extracted using ultrasonic assisted ethanol extraction,and extraction rate of total flavonoids was taken as evaluation index. On the basis of single-factor experiment,Box-Behnken response surface methodology was employed for selecting the optimum extraction process. [Results]The optimum extraction conditions of total flavonoids were as follows: 75% of ethanol concentration,1∶ 25 of ratio of material to liquid,31 min of ultrasonic time. Under these conditions,the extraction rate of total flavonoids was 1. 115%.[Conclusions] The extraction process obtained by response surface methodology was stable,reasonable,accurate and reliable. It was a feasible method to extract the total flavonoids from M. apelta leaves.展开更多
A method was developed for determination of 7 indictors the polychlorinated biphenyls (PCBs) residues in porphyra by gas chromatography (GC) with electron capture detector (ECD). The PCBs were extracted with hexane/me...A method was developed for determination of 7 indictors the polychlorinated biphenyls (PCBs) residues in porphyra by gas chromatography (GC) with electron capture detector (ECD). The PCBs were extracted with hexane/methylene chloride (1:1, v/v) by ultrasonic extraction and the samples were cleaned up by concentrated sulfuric acid and Alumina-N solid phase extraction cartridge. The analytes were quantified by an internal standard method. Under optimal experimental conditions, good linearity was observed in the range of 5 - 200 ng/mL and the correlation coefficients were 0.9994 - 0.9998. The limit of quantitation (LOQ) for target analytes ranged from 6.0 to 10.0 μg/kg. At the spiked levels of 10, 50, 100 μg/kg, the average recoveries ranged from 90.9% to 102% with the relative standard deviations 2.12% - 6.32%. The result showed that the proposed method was rapid, and could be used for the determination of the PCBs in porphyra.展开更多
The aim was to optimize ultrasonic extraction conditions and study antioxidant activities of lychee pericarp polysaccharides. The effects of extraction temperature,time,ultrasonic power,solid-liquid ratio on polysacch...The aim was to optimize ultrasonic extraction conditions and study antioxidant activities of lychee pericarp polysaccharides. The effects of extraction temperature,time,ultrasonic power,solid-liquid ratio on polysaccharides yield were investigated by single-factor experiment and orthogonal experiment to obtain optimum extraction conditions; the antioxidant activities of lychee pericarp polysaccharides were evaluated by the total antioxidant activity. Optimum extraction process was under extraction temperature of 80 ℃,extraction time of 2. 5 h,ultrasonic power of 180 W,solid-liquid ratio of 1∶ 25 g / m L; the total antioxidant activity was increased with the increasing concentration of polysaccharides. The extraction process is simple and efficient. The extraction rate of lychee pericarp polysaccharides with antioxidant activities is high.展开更多
[Objectives]To study the optimal extraction process of total flavonoids in Rhodiola rosea L.,and further facilitate the development and utilization of Rhodiola rosea L. [Methods]With Rhodiola crenulata as raw material...[Objectives]To study the optimal extraction process of total flavonoids in Rhodiola rosea L.,and further facilitate the development and utilization of Rhodiola rosea L. [Methods]With Rhodiola crenulata as raw material,ethanol as extractant,ultrasonic extraction as the extraction method,the single factor method was first used for preliminary investigation of effect of ethanol volume fraction,solid-liquid ratio,extraction temperature and extraction time on the flavonoids extraction rate,and then the Box-Behnken response surface method was used to optimize the extraction process of total flavonoids in R. crenulata. [Results] The optimal extraction conditions: ethanol concentration of 72%;solid-liquid ratio of 1∶ 43; extraction temperature of 66℃; extraction time of 50 min. Under these conditions,the extraction rate of total flavonoids from R. crenulata was 2. 591%. [Conclusions] The results showed that the method of response surface was reasonable and feasible for the optimization of ultrasonic extraction of total flavonoids from R. crenulata.展开更多
With the leaves,bark and roots of Liriodendron chinense Sarg.× L.tulipifera L.as experiment materials,the ultrasonic-assisted extraction conditions of total flavonoids were optimized by response surface Box-Behnk...With the leaves,bark and roots of Liriodendron chinense Sarg.× L.tulipifera L.as experiment materials,the ultrasonic-assisted extraction conditions of total flavonoids were optimized by response surface Box-Behnken test design.Ultrasonic time and liquid-to-solid ratio had significant effects on the extraction amount of flavonoids from the leaves of L.chinense Sarg.× L.tulipifera L.;ultrasonic temperature and liquid-to-solid ratio had an interaction on the extraction amount of flavonoids;and the optimum ultrasonic time,temperature and liquid-to-solid ratio for the extraction of flavonoids from leaves of L.chinense Sarg.× L.tulipifera L.were 19.82 min,28.60 ℃ and 9.48 ml/g,respectively.Ultrasonic time,temperature and liquid-to-solid ratio had significant effects on the extraction amount of flavonoids from L.chinense Sarg.× L.tulipifera L.;there was a significant interaction between any two of the factors,which had a significant effect on the extraction of flavonoids;and the optimum extraction parameters for flavonoids in the bark were the ultrasonic time of 33.66 min,the ultrasonic temperature at 32.85 ℃ and the liquid-to-solid ratio of 11.39 ml/g.Ultrasonic time and liquid-to-solid ratio had significant effects on the extraction of flavonoids from roots;there was a significant interaction between ultrasonic time and liquid-to-solid ratio and between ultrasonic temperature and liquid-to-solid ratio;and the optimum extraction parameters for flavonoids from the roots of L.chinense Sarg.× L.tulipifera L.were the ultrasonic time of 32.38 min,the ultrasonic temperature at 25.0 ℃ and the liquid-to-solid ratio of 8.00 ml/g.The results of the three models were stable.The models are feasible and have good application value.展开更多
In the present study, ultrasonic extraction technique(UET) is used to improve the yield of polysaccharides from Laminaria japonica(LJPs). And their antioxidative as well as glycosidase inhibitory activities are invest...In the present study, ultrasonic extraction technique(UET) is used to improve the yield of polysaccharides from Laminaria japonica(LJPs). And their antioxidative as well as glycosidase inhibitory activities are investigated. Box-Behnken design(BBD) combined with response surface methodology(RSM) is applied to optimize ultrasonic extraction for polysaccharides. The optimized conditions are obtained as extraction time at 54 min, ultrasonic power at 1050 W, extraction temperature at 80℃ and ratio of material to solvent at 1:50(g m L-1). Under these optimal ultrasonic extraction conditions, an actual experimental yield(5.75% ± 0.3%) is close to the predicted result(5.67%) with no significant difference(P > 0.05). Vitro antioxidative and glycosidase inhibitory activities tests indicate that the crude polysaccharides(LJP) and two major ethanol precipitated fractions(LJP1 and LJP2) are in a concentration-dependent manner. LJP2(30%-60% ethanol precipitated polysaccharides) possesses the strongest α-glucosidase inhibitory activity and moderate scavenging activity against hydroxyl radicals(66.09% ± 2.19%, 3.0 mg m L-1). Also, the inhibitory activity against α-glucosidase(59.08% ± 3.79%, 5.0 mg m L-1) is close to that of acarbose(63.99% ± 3.27%, 5.0 mg m L-1). LJP1(30% ethanol precipitated polysaccharides) exhibits the strongest scavenging activity against hydroxyl radicals(99.80% ± 0.00%, 3.0 mgm L-1) and moderate α-glucosidase inhibitory activity(47.76% ± 1.92%, 5.0 mg m L-1). LJP shows the most remarkable DPPH scavenging activity(66.20% ± 0.11%, 5.0 mg m L-1) but weakest α-glucosidase inhibitory activity(37.77% ± 1.30%, 5.0 mg m L-1). However, all these LJPs exert weak inhibitory effects against α-amylase. These results show that UET is an effective method for extracting bioactive polysaccharides from seaweed materials. LJP1 and LJP2 can be developed as a potential ingredient in hypoglycemic agents or functional food for the management of diabetes. This study provides scientific evidence and advances in the preparation technology and a hypoglycemic activities evaluation method for seaweed polysaccharides, especially glycosidase inhibition in combination with an antioxidative activity evaluation method.展开更多
[Objectives] The research aimed to explore extraction method of Oenanthe benghalensis polysaccharide,and determine the optimal process of its ultrasonic extraction by orthogonal test. [Methods] Phenol-sulfuric acid me...[Objectives] The research aimed to explore extraction method of Oenanthe benghalensis polysaccharide,and determine the optimal process of its ultrasonic extraction by orthogonal test. [Methods] Phenol-sulfuric acid method was used to determine polysaccharide's content. Based on single-factor experiment and orthogonal test,the influences of solid-liquid ratio( A),ultrasonic extraction temperature( B),ultrasonic power( C) and ultrasonic time( D) on extraction rate of O. benghalensis polysaccharide were studied,and the optimal process of ultrasonic extraction was selected. [Results] The influence order of solid-liquid ratio( A),ultrasonic extraction temperature( B),ultrasonic power( C) and ultrasonic time( D) on extraction rate of O. benghalensis polysaccharide was A > D > B > C. Via the orthogonal test,it was determined that the optimal extraction condition of O. benghalensis polysaccharide was as below: solid-liquid ratio 1∶ 25( g/mL),extraction temperature 60℃,extraction power 80 W,extraction time 40 min. Under the condition,extraction rate of O. benghalensis polysaccharide was9. 80%. [Conclusions] The process could provide the reference basis for extracting and producing O. benghalensis polysaccharides.展开更多
[Objective] This study aimed to optimize the ultrasonic extraction process of total flavonoids from Angelica keiskei Koidzumi. [Method] Using the yield of total flavonoids as an indicator,the ultrasonic extraction pro...[Objective] This study aimed to optimize the ultrasonic extraction process of total flavonoids from Angelica keiskei Koidzumi. [Method] Using the yield of total flavonoids as an indicator,the ultrasonic extraction process of total flavonoids from A. keiskei was optimized by orthogonal experimental design. [Result]Among four factors in orthogonal experimental design,extraction time exhibited the most significant effect on the extraction result; ethanol concentration exhibited a significant effect on the extraction result; ultrasonic power and solid-to-liquid ratio had no significant effect. The optimal conditions for ultrasonic extraction of total flavonoids from A. keiskei were extraction time of 25 min,ethanol concentration of 80%,ultrasonic power of 60 W,solid-to-liquid ratio of 1∶ 20( g/ml),under which the yield of total flavonoids reached 1. 56%. [Conclusion]This study provides the basis for further development and utilization of total flavonoids from A. keiskei.展开更多
The procedures of ultrasonic extraction and clean-up were optimized for the determination of polycyclic aromatic hydrocarbons (PAHs) in marine sediments. Samples were ultrasonically extracted, and the extracts were pu...The procedures of ultrasonic extraction and clean-up were optimized for the determination of polycyclic aromatic hydrocarbons (PAHs) in marine sediments. Samples were ultrasonically extracted, and the extracts were purified with a miniaturized silica gel chromatographic column and analyzed with high performance liquid chromatography (HPLC) with a fluorescence detector. Ultrasonication with methanol-dichloromethane (2:1, v/v) mixture gave higher extraction efficiency than that with dichloromethane. Among the three elution solvents used in clean-up step, dichloromethane-hexane (2:3, v/v) mixture was the most satisfactory. Under the optimized conditions, the recoveries in the range of 54.82% to 94.70% with RSDs of 3.02% to 23.22% for a spiked blank, and in the range of 61.20% to 127.08% with RSDs of 7.61% to 26.93% for a spiked matrix, were obtained for the 15 PAHs studied, while the recoveries for a NIST standard reference SRM 1941b were in the range of 50.79% to 83.78% with RSDs of 5.24% to 21.38%. The detection limits were between 0.75 ng L-1 and 10.99 ng L-1for different PAHs. A sample from the Jiaozhou Bay area was examined to test the established methods.展开更多
[Objective] This study aimed to investigate the optimal conditions for ultrasonic extraction of polysaccharides from Polyporus umbellatus,thus providing a reliable basis for the development and utilization of P. umbel...[Objective] This study aimed to investigate the optimal conditions for ultrasonic extraction of polysaccharides from Polyporus umbellatus,thus providing a reliable basis for the development and utilization of P. umbellatus. [Method]By single-factor experiment,the ultrasonic extraction process of polyporus polysaccharides was optimized. [Result] The optimal conditions for ultrasonic extraction of polysaccharides from P. umbellatus were: solid-liquid ratio 1∶40( g∶ml),extraction duration 60 min,extraction temperature 70 ℃,ultrasonic power 100 W. [Conclusion]Compared with conventional water extraction method,ultrasonic extraction could significantly improve the content of polyporus polysaccharides with shorter extraction duration,lower solid-liquid ratio and lower extraction temperature.展开更多
In this study,by using mulberry leaves as raw materials,ultrasonic extraction process of total flavonoids from mulberry leaves was optimized by orthogonal experiment. Results showed that the maximum yield of total fla...In this study,by using mulberry leaves as raw materials,ultrasonic extraction process of total flavonoids from mulberry leaves was optimized by orthogonal experiment. Results showed that the maximum yield of total flavonoids( 6. 1%) was obtained from mulberry leaves with addition of 45 times the volume of water by ultrasonic extraction at 55 ℃ for three times,55 min each. According to the verification test,the optimized technical process was reasonable and feasible with high stability.展开更多
[Objective]To optimize the ultrasonic extraction technology of cottonseed oil by response surface methodology.[Method]Based on the single factor experiment,the response surface method with three factors at three level...[Objective]To optimize the ultrasonic extraction technology of cottonseed oil by response surface methodology.[Method]Based on the single factor experiment,the response surface method with three factors at three levels was adopted according to the principle of central composite design.The optimum extraction conditions of extraction duration,liquid-solid ratio and temperature were determined by regression analysis.[Result]The best ultrasonic extraction conditions of cottonseed oil were 35 min of extraction duration,38℃ of extraction temperature and 56:6 of liquid-solid ratio.Under these conditions,the extraction rate of cottonseed oil could reach up to 45.81%,with a relative error of 0.13% from the theoretical value of 45.94%.[Conclusion]The method optimized the extraction technology and laid foundation for the further research of cottonseed oil.展开更多
Objective:To analyze the efficacy of ultrasonic emulsification and small incision cataract extracapsular extraction in cataract patients.Methods:96 cataract patients admitted from May 2021 to May 2023 were selected an...Objective:To analyze the efficacy of ultrasonic emulsification and small incision cataract extracapsular extraction in cataract patients.Methods:96 cataract patients admitted from May 2021 to May 2023 were selected and randomly grouped into group A(ultrasonic emulsification)and group B(small-incision extracapsular cataract extraction),with 48 cases each.Results:At 1 week,1-month,and 3 months post-operation,the visual acuity of group A was higher and the astigmatism value was lower than that of group B(P<0.05);at 12h,24h,and 48h post-operation,the intraocular pressure of group A was higher than that of group B(P<0.05);the thickness of macular area of group A was lower than that of group B at 1 week and 1-month post-operation(P<0.05).Conclusion:Ultrasonic emulsification in cataract patients was slightly better than small incision cataract extracapsular extraction in correcting astigmatism,improving visual acuity,and regulating macular thickness.However,due to the high energy of ultrasonic emulsification,the risk of complications such as high postoperative intraocular pressure was higher.Small-incision extracapsular cataract extraction has better application value in economically disadvantaged areas.展开更多
Congenital heart defect,accounting for about 30%of congenital defects,is the most common one.Data shows that congenital heart defects have seriously affected the birth rate of healthy newborns.In Fetal andNeonatal Car...Congenital heart defect,accounting for about 30%of congenital defects,is the most common one.Data shows that congenital heart defects have seriously affected the birth rate of healthy newborns.In Fetal andNeonatal Cardiology,medical imaging technology(2D ultrasonic,MRI)has been proved to be helpful to detect congenital defects of the fetal heart and assists sonographers in prenatal diagnosis.It is a highly complex task to recognize 2D fetal heart ultrasonic standard plane(FHUSP)manually.Compared withmanual identification,automatic identification through artificial intelligence can save a lot of time,ensure the efficiency of diagnosis,and improve the accuracy of diagnosis.In this study,a feature extraction method based on texture features(Local Binary Pattern LBP and Histogram of Oriented Gradient HOG)and combined with Bag of Words(BOW)model is carried out,and then feature fusion is performed.Finally,it adopts Support VectorMachine(SVM)to realize automatic recognition and classification of FHUSP.The data includes 788 standard plane data sets and 448 normal and abnormal plane data sets.Compared with some other methods and the single method model,the classification accuracy of our model has been obviously improved,with the highest accuracy reaching 87.35%.Similarly,we also verify the performance of the model in normal and abnormal planes,and the average accuracy in classifying abnormal and normal planes is 84.92%.The experimental results show that thismethod can effectively classify and predict different FHUSP and can provide certain assistance for sonographers to diagnose fetal congenital heart disease.展开更多
Jujube contains abundant cyclic adenosine monophosphate(cAMP)and the ultrasonic-assisted pectinase extraction(UAPE)conditions for obtaining the maximum cAMP yield from jujube were optimized.Orthogonal array design was...Jujube contains abundant cyclic adenosine monophosphate(cAMP)and the ultrasonic-assisted pectinase extraction(UAPE)conditions for obtaining the maximum cAMP yield from jujube were optimized.Orthogonal array design was applied to evaluate the effects of 4 variables by UAPE on cAMP yield.The results showed that the optimal cAMP yield(783.0μg/g)was derived at ratio of liquid to solid 5 mL/g,ratio of pectinase to raw material 1.5%,time 60 min and temperature 40℃.Moreover,the effect of cAMP on the anti-allergic function of action induced by immunoglobulin E(IgE)and its meschanism was investigated through establishing the sensitized cell model in rat basophilic leukemia(RBL-2 H3)cells using dinitrophenylated(DNP)-bovine serum albumin(BSA)-IgE.The results showed that cAMP interfered with sensitized cells,effectively inhibited the occurrence of basophil degranulation in dose dependence,and significantly reduced the activity ofβ-hexosamindase(β-hex),at the optimal concentration of 50μg/mL.The level of anti-inflammatory factor interleukin-10(IL-10)was promoted and the content of pro-inflammatory factor tumor necrosis factor-α(TNF-α)was suppressed by cAMP.In addition,influx of intracellular Ca^(2+) was repressed effectively.Our results demonstrate that jujube cAMP regulated the cytokine balance in the allergy pathway through blocking the influx of extracellular Ca^(2+),with the prevention of allergy symptoms.展开更多
The joint entity relation extraction model which integrates the semantic information of relation is favored by relevant researchers because of its effectiveness in solving the overlapping of entities,and the method of...The joint entity relation extraction model which integrates the semantic information of relation is favored by relevant researchers because of its effectiveness in solving the overlapping of entities,and the method of defining the semantic template of relation manually is particularly prominent in the extraction effect because it can obtain the deep semantic information of relation.However,this method has some problems,such as relying on expert experience and poor portability.Inspired by the rule-based entity relation extraction method,this paper proposes a joint entity relation extraction model based on a relation semantic template automatically constructed,which is abbreviated as RSTAC.This model refines the extraction rules of relation semantic templates from relation corpus through dependency parsing and realizes the automatic construction of relation semantic templates.Based on the relation semantic template,the process of relation classification and triplet extraction is constrained,and finally,the entity relation triplet is obtained.The experimental results on the three major Chinese datasets of DuIE,SanWen,and FinRE showthat the RSTAC model successfully obtains rich deep semantics of relation,improves the extraction effect of entity relation triples,and the F1 scores are increased by an average of 0.96% compared with classical joint extraction models such as CasRel,TPLinker,and RFBFN.展开更多
In order to clarify the fatigue damage evolution of concrete exposed to flexural fatigue loads,ultrasonic pulse velocity(UPV),impact-echo technology and surface electrical resistance(SR) method were used.Damage variab...In order to clarify the fatigue damage evolution of concrete exposed to flexural fatigue loads,ultrasonic pulse velocity(UPV),impact-echo technology and surface electrical resistance(SR) method were used.Damage variable based on the change of velocity of ultrasonic pulse(Du) and impact elastic wave(Di)were defined according to the classical damage theory.The influences of stress level,loading frequency and concrete strength on damage variable were measured.The experimental results show that Du and Di both present a three-stages trend for concrete exposed to fatigue loads.Since impact elastic wave is more sensitive to the microstructure damage in stage Ⅲ,the critical damage variable,i e,the damage variable before the final fracture of concrete of Di is slightly higher than that of Du.Meanwhile,the evolution of SR of concrete exposed to fatigue loads were analyzed and the relationship between SR and Du,SR and Di of concrete exposed to fatigue loads were established.It is found that the SR of concrete was decreased with the increasing fatigue cycles,indicating that surface electrical resistance method can also be applied to describe the damage of ballastless track concrete exposed to fatigue loads.展开更多
A transient 3D model was established to investigate the effect of spatial interaction of ultrasounds on the dual-frequency ultrasonic field in magnesium alloy melt.The effects of insertion depth and tip shape of the u...A transient 3D model was established to investigate the effect of spatial interaction of ultrasounds on the dual-frequency ultrasonic field in magnesium alloy melt.The effects of insertion depth and tip shape of the ultrasonic rods,input pressures and their ratio on the acoustic field distribution were discussed in detail.Additionally,the spacing,angle,and insertion depth of two ultrasonic rods significantly affect the interaction between distinct ultrasounds.As a result,various acoustic pressure distributions and cavitation regions are obtained.The spherical rods mitigate the longitudinal and transversal attenuation of acoustic pressure and expand the cavitation volume by 53.7%and 31.7%,respectively,compared to the plate and conical rods.Increasing the input pressure will enlarge the cavitation region but has no effect on the acoustic pressure distribution pattern.The acoustic pressure ratio significantly affects the pressure distribution and the cavitation region,and the best cavitation effect is obtained at the ratio of 2:1(P15:P20).展开更多
Biometric recognition is a widely used technology for user authentication.In the application of this technology,biometric security and recognition accuracy are two important issues that should be considered.In terms o...Biometric recognition is a widely used technology for user authentication.In the application of this technology,biometric security and recognition accuracy are two important issues that should be considered.In terms of biometric security,cancellable biometrics is an effective technique for protecting biometric data.Regarding recognition accuracy,feature representation plays a significant role in the performance and reliability of cancellable biometric systems.How to design good feature representations for cancellable biometrics is a challenging topic that has attracted a great deal of attention from the computer vision community,especially from researchers of cancellable biometrics.Feature extraction and learning in cancellable biometrics is to find suitable feature representations with a view to achieving satisfactory recognition performance,while the privacy of biometric data is protected.This survey informs the progress,trend and challenges of feature extraction and learning for cancellable biometrics,thus shedding light on the latest developments and future research of this area.展开更多
基金Supported by the Program of Guilin Municipal Science and Technology Bureau(20130403-4)Science and Technology Program of Traditional Chinese Medicine from Guangxi Administration of Traditional Chinese Medicine(GZLC14-31)Undergraduate Innovation and Entrepreneurship Training Plan Project of Autonomous District Level in 2017(201710601082)
文摘[Objectives] Response surface analysis methodology was used to optimize the extraction technology of total flavonoids from Mallotus apelta leaves. [Methods] The total flavonoids were extracted using ultrasonic assisted ethanol extraction,and extraction rate of total flavonoids was taken as evaluation index. On the basis of single-factor experiment,Box-Behnken response surface methodology was employed for selecting the optimum extraction process. [Results]The optimum extraction conditions of total flavonoids were as follows: 75% of ethanol concentration,1∶ 25 of ratio of material to liquid,31 min of ultrasonic time. Under these conditions,the extraction rate of total flavonoids was 1. 115%.[Conclusions] The extraction process obtained by response surface methodology was stable,reasonable,accurate and reliable. It was a feasible method to extract the total flavonoids from M. apelta leaves.
文摘A method was developed for determination of 7 indictors the polychlorinated biphenyls (PCBs) residues in porphyra by gas chromatography (GC) with electron capture detector (ECD). The PCBs were extracted with hexane/methylene chloride (1:1, v/v) by ultrasonic extraction and the samples were cleaned up by concentrated sulfuric acid and Alumina-N solid phase extraction cartridge. The analytes were quantified by an internal standard method. Under optimal experimental conditions, good linearity was observed in the range of 5 - 200 ng/mL and the correlation coefficients were 0.9994 - 0.9998. The limit of quantitation (LOQ) for target analytes ranged from 6.0 to 10.0 μg/kg. At the spiked levels of 10, 50, 100 μg/kg, the average recoveries ranged from 90.9% to 102% with the relative standard deviations 2.12% - 6.32%. The result showed that the proposed method was rapid, and could be used for the determination of the PCBs in porphyra.
基金Supported by Superior and Characteristic Specialty Construction Project of Guangxi’s Colleges and Universities(201452)
文摘The aim was to optimize ultrasonic extraction conditions and study antioxidant activities of lychee pericarp polysaccharides. The effects of extraction temperature,time,ultrasonic power,solid-liquid ratio on polysaccharides yield were investigated by single-factor experiment and orthogonal experiment to obtain optimum extraction conditions; the antioxidant activities of lychee pericarp polysaccharides were evaluated by the total antioxidant activity. Optimum extraction process was under extraction temperature of 80 ℃,extraction time of 2. 5 h,ultrasonic power of 180 W,solid-liquid ratio of 1∶ 25 g / m L; the total antioxidant activity was increased with the increasing concentration of polysaccharides. The extraction process is simple and efficient. The extraction rate of lychee pericarp polysaccharides with antioxidant activities is high.
基金Supported by Tibetan 13th Five-Year Agricultural Product Processing and Product Development Project
文摘[Objectives]To study the optimal extraction process of total flavonoids in Rhodiola rosea L.,and further facilitate the development and utilization of Rhodiola rosea L. [Methods]With Rhodiola crenulata as raw material,ethanol as extractant,ultrasonic extraction as the extraction method,the single factor method was first used for preliminary investigation of effect of ethanol volume fraction,solid-liquid ratio,extraction temperature and extraction time on the flavonoids extraction rate,and then the Box-Behnken response surface method was used to optimize the extraction process of total flavonoids in R. crenulata. [Results] The optimal extraction conditions: ethanol concentration of 72%;solid-liquid ratio of 1∶ 43; extraction temperature of 66℃; extraction time of 50 min. Under these conditions,the extraction rate of total flavonoids from R. crenulata was 2. 591%. [Conclusions] The results showed that the method of response surface was reasonable and feasible for the optimization of ultrasonic extraction of total flavonoids from R. crenulata.
基金Supported by the Policy Guidance Plan of Jiangsu Province(Production and Research Cooperation)(BY2016061-27)College Students’Practice Innovation Training Program of Jiangsu Province(201811049045X)
文摘With the leaves,bark and roots of Liriodendron chinense Sarg.× L.tulipifera L.as experiment materials,the ultrasonic-assisted extraction conditions of total flavonoids were optimized by response surface Box-Behnken test design.Ultrasonic time and liquid-to-solid ratio had significant effects on the extraction amount of flavonoids from the leaves of L.chinense Sarg.× L.tulipifera L.;ultrasonic temperature and liquid-to-solid ratio had an interaction on the extraction amount of flavonoids;and the optimum ultrasonic time,temperature and liquid-to-solid ratio for the extraction of flavonoids from leaves of L.chinense Sarg.× L.tulipifera L.were 19.82 min,28.60 ℃ and 9.48 ml/g,respectively.Ultrasonic time,temperature and liquid-to-solid ratio had significant effects on the extraction amount of flavonoids from L.chinense Sarg.× L.tulipifera L.;there was a significant interaction between any two of the factors,which had a significant effect on the extraction of flavonoids;and the optimum extraction parameters for flavonoids in the bark were the ultrasonic time of 33.66 min,the ultrasonic temperature at 32.85 ℃ and the liquid-to-solid ratio of 11.39 ml/g.Ultrasonic time and liquid-to-solid ratio had significant effects on the extraction of flavonoids from roots;there was a significant interaction between ultrasonic time and liquid-to-solid ratio and between ultrasonic temperature and liquid-to-solid ratio;and the optimum extraction parameters for flavonoids from the roots of L.chinense Sarg.× L.tulipifera L.were the ultrasonic time of 32.38 min,the ultrasonic temperature at 25.0 ℃ and the liquid-to-solid ratio of 8.00 ml/g.The results of the three models were stable.The models are feasible and have good application value.
基金supported by the Project of National Key Technology Research and Development Program for the 12th Five-year Plan(No.2012BAD33B10)Public Science and Technology Research Funds Projects of Ocean(No.201305018-2)+4 种基金the Innovative Development of Marine Economy Regional Demonstration Projects(Nos.SZHY2012-B01-004,GD2013-B03-001)the National Scien-ce Foundation for Young Scientists of China(No.31101271)the Natural Science Foundation of Guangdong Province(Nos.2014A030310338,2014A030310351)the Comprehensive Strategic Cooperation Programs between the Guangdong Province and Chinese Academy of Sciences(No.2011B090300057)the Frontier Science Program for Young Scientists of South China Sea Institute of Oceanology,Chinese Academy of Science(No.SQ 201017)
文摘In the present study, ultrasonic extraction technique(UET) is used to improve the yield of polysaccharides from Laminaria japonica(LJPs). And their antioxidative as well as glycosidase inhibitory activities are investigated. Box-Behnken design(BBD) combined with response surface methodology(RSM) is applied to optimize ultrasonic extraction for polysaccharides. The optimized conditions are obtained as extraction time at 54 min, ultrasonic power at 1050 W, extraction temperature at 80℃ and ratio of material to solvent at 1:50(g m L-1). Under these optimal ultrasonic extraction conditions, an actual experimental yield(5.75% ± 0.3%) is close to the predicted result(5.67%) with no significant difference(P > 0.05). Vitro antioxidative and glycosidase inhibitory activities tests indicate that the crude polysaccharides(LJP) and two major ethanol precipitated fractions(LJP1 and LJP2) are in a concentration-dependent manner. LJP2(30%-60% ethanol precipitated polysaccharides) possesses the strongest α-glucosidase inhibitory activity and moderate scavenging activity against hydroxyl radicals(66.09% ± 2.19%, 3.0 mg m L-1). Also, the inhibitory activity against α-glucosidase(59.08% ± 3.79%, 5.0 mg m L-1) is close to that of acarbose(63.99% ± 3.27%, 5.0 mg m L-1). LJP1(30% ethanol precipitated polysaccharides) exhibits the strongest scavenging activity against hydroxyl radicals(99.80% ± 0.00%, 3.0 mgm L-1) and moderate α-glucosidase inhibitory activity(47.76% ± 1.92%, 5.0 mg m L-1). LJP shows the most remarkable DPPH scavenging activity(66.20% ± 0.11%, 5.0 mg m L-1) but weakest α-glucosidase inhibitory activity(37.77% ± 1.30%, 5.0 mg m L-1). However, all these LJPs exert weak inhibitory effects against α-amylase. These results show that UET is an effective method for extracting bioactive polysaccharides from seaweed materials. LJP1 and LJP2 can be developed as a potential ingredient in hypoglycemic agents or functional food for the management of diabetes. This study provides scientific evidence and advances in the preparation technology and a hypoglycemic activities evaluation method for seaweed polysaccharides, especially glycosidase inhibition in combination with an antioxidative activity evaluation method.
基金Supported by Chinese Medicine Chemistry Construction Project in"12th Fiveyear" Key Disciplines of Chinese Medicine,State Administration of Traditional Chinese Medicine(Guozhongyiyaorenjiaofa[2012]32)Pharmaceutical Chemistry Construction Project of Guangxi Key Discipline(Guijiaokeyan[2013]16)+1 种基金Construction Program of Technology Innovation Capability Upgrading Project in Guangxi Colleges and Universities(Guijiaokeyan[2015]5)Student's Platform for Innovation and Entrepreneurship Training Program in Youjiang Medical University for Nationalities in 2017(201710599110)
文摘[Objectives] The research aimed to explore extraction method of Oenanthe benghalensis polysaccharide,and determine the optimal process of its ultrasonic extraction by orthogonal test. [Methods] Phenol-sulfuric acid method was used to determine polysaccharide's content. Based on single-factor experiment and orthogonal test,the influences of solid-liquid ratio( A),ultrasonic extraction temperature( B),ultrasonic power( C) and ultrasonic time( D) on extraction rate of O. benghalensis polysaccharide were studied,and the optimal process of ultrasonic extraction was selected. [Results] The influence order of solid-liquid ratio( A),ultrasonic extraction temperature( B),ultrasonic power( C) and ultrasonic time( D) on extraction rate of O. benghalensis polysaccharide was A > D > B > C. Via the orthogonal test,it was determined that the optimal extraction condition of O. benghalensis polysaccharide was as below: solid-liquid ratio 1∶ 25( g/mL),extraction temperature 60℃,extraction power 80 W,extraction time 40 min. Under the condition,extraction rate of O. benghalensis polysaccharide was9. 80%. [Conclusions] The process could provide the reference basis for extracting and producing O. benghalensis polysaccharides.
基金Supported by Scientific Research Project of Liaoning Provincial Department of Education(L2014502)Innovation and Entrepreneurship Training Program for Undergraduates in Liaoning Institute of Science and Technology(201511430069)
文摘[Objective] This study aimed to optimize the ultrasonic extraction process of total flavonoids from Angelica keiskei Koidzumi. [Method] Using the yield of total flavonoids as an indicator,the ultrasonic extraction process of total flavonoids from A. keiskei was optimized by orthogonal experimental design. [Result]Among four factors in orthogonal experimental design,extraction time exhibited the most significant effect on the extraction result; ethanol concentration exhibited a significant effect on the extraction result; ultrasonic power and solid-to-liquid ratio had no significant effect. The optimal conditions for ultrasonic extraction of total flavonoids from A. keiskei were extraction time of 25 min,ethanol concentration of 80%,ultrasonic power of 60 W,solid-to-liquid ratio of 1∶ 20( g/ml),under which the yield of total flavonoids reached 1. 56%. [Conclusion]This study provides the basis for further development and utilization of total flavonoids from A. keiskei.
基金supported by the National Natural Science Foundation of China (Grant No.20775074)
文摘The procedures of ultrasonic extraction and clean-up were optimized for the determination of polycyclic aromatic hydrocarbons (PAHs) in marine sediments. Samples were ultrasonically extracted, and the extracts were purified with a miniaturized silica gel chromatographic column and analyzed with high performance liquid chromatography (HPLC) with a fluorescence detector. Ultrasonication with methanol-dichloromethane (2:1, v/v) mixture gave higher extraction efficiency than that with dichloromethane. Among the three elution solvents used in clean-up step, dichloromethane-hexane (2:3, v/v) mixture was the most satisfactory. Under the optimized conditions, the recoveries in the range of 54.82% to 94.70% with RSDs of 3.02% to 23.22% for a spiked blank, and in the range of 61.20% to 127.08% with RSDs of 7.61% to 26.93% for a spiked matrix, were obtained for the 15 PAHs studied, while the recoveries for a NIST standard reference SRM 1941b were in the range of 50.79% to 83.78% with RSDs of 5.24% to 21.38%. The detection limits were between 0.75 ng L-1 and 10.99 ng L-1for different PAHs. A sample from the Jiaozhou Bay area was examined to test the established methods.
基金Supported by Practical Innovation Program for College Students in Jiangsu ProvinceSocial Development Project of Taizhou City(TS019)
文摘[Objective] This study aimed to investigate the optimal conditions for ultrasonic extraction of polysaccharides from Polyporus umbellatus,thus providing a reliable basis for the development and utilization of P. umbellatus. [Method]By single-factor experiment,the ultrasonic extraction process of polyporus polysaccharides was optimized. [Result] The optimal conditions for ultrasonic extraction of polysaccharides from P. umbellatus were: solid-liquid ratio 1∶40( g∶ml),extraction duration 60 min,extraction temperature 70 ℃,ultrasonic power 100 W. [Conclusion]Compared with conventional water extraction method,ultrasonic extraction could significantly improve the content of polyporus polysaccharides with shorter extraction duration,lower solid-liquid ratio and lower extraction temperature.
基金Supported by Science and Technology Innovation Program of Henan Universityof Traditional Chinese Medicine(No.2012PYTD03)
文摘In this study,by using mulberry leaves as raw materials,ultrasonic extraction process of total flavonoids from mulberry leaves was optimized by orthogonal experiment. Results showed that the maximum yield of total flavonoids( 6. 1%) was obtained from mulberry leaves with addition of 45 times the volume of water by ultrasonic extraction at 55 ℃ for three times,55 min each. According to the verification test,the optimized technical process was reasonable and feasible with high stability.
文摘[Objective]To optimize the ultrasonic extraction technology of cottonseed oil by response surface methodology.[Method]Based on the single factor experiment,the response surface method with three factors at three levels was adopted according to the principle of central composite design.The optimum extraction conditions of extraction duration,liquid-solid ratio and temperature were determined by regression analysis.[Result]The best ultrasonic extraction conditions of cottonseed oil were 35 min of extraction duration,38℃ of extraction temperature and 56:6 of liquid-solid ratio.Under these conditions,the extraction rate of cottonseed oil could reach up to 45.81%,with a relative error of 0.13% from the theoretical value of 45.94%.[Conclusion]The method optimized the extraction technology and laid foundation for the further research of cottonseed oil.
文摘Objective:To analyze the efficacy of ultrasonic emulsification and small incision cataract extracapsular extraction in cataract patients.Methods:96 cataract patients admitted from May 2021 to May 2023 were selected and randomly grouped into group A(ultrasonic emulsification)and group B(small-incision extracapsular cataract extraction),with 48 cases each.Results:At 1 week,1-month,and 3 months post-operation,the visual acuity of group A was higher and the astigmatism value was lower than that of group B(P<0.05);at 12h,24h,and 48h post-operation,the intraocular pressure of group A was higher than that of group B(P<0.05);the thickness of macular area of group A was lower than that of group B at 1 week and 1-month post-operation(P<0.05).Conclusion:Ultrasonic emulsification in cataract patients was slightly better than small incision cataract extracapsular extraction in correcting astigmatism,improving visual acuity,and regulating macular thickness.However,due to the high energy of ultrasonic emulsification,the risk of complications such as high postoperative intraocular pressure was higher.Small-incision extracapsular cataract extraction has better application value in economically disadvantaged areas.
基金supported by Fujian Provincial Science and Technology Major Project(No.2020HZ02014)by the grants from National Natural Science Foundation of Fujian(2021J01133,2021J011404)by the Quanzhou Scientific and Technological Planning Projects(Nos.2018C113R,2019C028R,2019C029R,2019C076R and 2019C099R).
文摘Congenital heart defect,accounting for about 30%of congenital defects,is the most common one.Data shows that congenital heart defects have seriously affected the birth rate of healthy newborns.In Fetal andNeonatal Cardiology,medical imaging technology(2D ultrasonic,MRI)has been proved to be helpful to detect congenital defects of the fetal heart and assists sonographers in prenatal diagnosis.It is a highly complex task to recognize 2D fetal heart ultrasonic standard plane(FHUSP)manually.Compared withmanual identification,automatic identification through artificial intelligence can save a lot of time,ensure the efficiency of diagnosis,and improve the accuracy of diagnosis.In this study,a feature extraction method based on texture features(Local Binary Pattern LBP and Histogram of Oriented Gradient HOG)and combined with Bag of Words(BOW)model is carried out,and then feature fusion is performed.Finally,it adopts Support VectorMachine(SVM)to realize automatic recognition and classification of FHUSP.The data includes 788 standard plane data sets and 448 normal and abnormal plane data sets.Compared with some other methods and the single method model,the classification accuracy of our model has been obviously improved,with the highest accuracy reaching 87.35%.Similarly,we also verify the performance of the model in normal and abnormal planes,and the average accuracy in classifying abnormal and normal planes is 84.92%.The experimental results show that thismethod can effectively classify and predict different FHUSP and can provide certain assistance for sonographers to diagnose fetal congenital heart disease.
基金supported by grant from the National Key Research and Development Program of China(2018YFC1602201)the Open Research Fund Program of Beijing Key Lab of Plant Resource Research and Development,Beijing Technology and Business University(PRRD-2021-YB8)+1 种基金the National Natural Science Fund(31601395)the Key Program for Shaanxi Science and Technology(2020NY-146)。
文摘Jujube contains abundant cyclic adenosine monophosphate(cAMP)and the ultrasonic-assisted pectinase extraction(UAPE)conditions for obtaining the maximum cAMP yield from jujube were optimized.Orthogonal array design was applied to evaluate the effects of 4 variables by UAPE on cAMP yield.The results showed that the optimal cAMP yield(783.0μg/g)was derived at ratio of liquid to solid 5 mL/g,ratio of pectinase to raw material 1.5%,time 60 min and temperature 40℃.Moreover,the effect of cAMP on the anti-allergic function of action induced by immunoglobulin E(IgE)and its meschanism was investigated through establishing the sensitized cell model in rat basophilic leukemia(RBL-2 H3)cells using dinitrophenylated(DNP)-bovine serum albumin(BSA)-IgE.The results showed that cAMP interfered with sensitized cells,effectively inhibited the occurrence of basophil degranulation in dose dependence,and significantly reduced the activity ofβ-hexosamindase(β-hex),at the optimal concentration of 50μg/mL.The level of anti-inflammatory factor interleukin-10(IL-10)was promoted and the content of pro-inflammatory factor tumor necrosis factor-α(TNF-α)was suppressed by cAMP.In addition,influx of intracellular Ca^(2+) was repressed effectively.Our results demonstrate that jujube cAMP regulated the cytokine balance in the allergy pathway through blocking the influx of extracellular Ca^(2+),with the prevention of allergy symptoms.
基金supported by the National Natural Science Foundation of China(Nos.U1804263,U1736214,62172435)the Zhongyuan Science and Technology Innovation Leading Talent Project(No.214200510019).
文摘The joint entity relation extraction model which integrates the semantic information of relation is favored by relevant researchers because of its effectiveness in solving the overlapping of entities,and the method of defining the semantic template of relation manually is particularly prominent in the extraction effect because it can obtain the deep semantic information of relation.However,this method has some problems,such as relying on expert experience and poor portability.Inspired by the rule-based entity relation extraction method,this paper proposes a joint entity relation extraction model based on a relation semantic template automatically constructed,which is abbreviated as RSTAC.This model refines the extraction rules of relation semantic templates from relation corpus through dependency parsing and realizes the automatic construction of relation semantic templates.Based on the relation semantic template,the process of relation classification and triplet extraction is constrained,and finally,the entity relation triplet is obtained.The experimental results on the three major Chinese datasets of DuIE,SanWen,and FinRE showthat the RSTAC model successfully obtains rich deep semantics of relation,improves the extraction effect of entity relation triples,and the F1 scores are increased by an average of 0.96% compared with classical joint extraction models such as CasRel,TPLinker,and RFBFN.
基金Funded by the National Natural Science Foundation of China(Nos.U1934206,52208299,and 52108260)the 2021 Tencent XPLORER PRIZE。
文摘In order to clarify the fatigue damage evolution of concrete exposed to flexural fatigue loads,ultrasonic pulse velocity(UPV),impact-echo technology and surface electrical resistance(SR) method were used.Damage variable based on the change of velocity of ultrasonic pulse(Du) and impact elastic wave(Di)were defined according to the classical damage theory.The influences of stress level,loading frequency and concrete strength on damage variable were measured.The experimental results show that Du and Di both present a three-stages trend for concrete exposed to fatigue loads.Since impact elastic wave is more sensitive to the microstructure damage in stage Ⅲ,the critical damage variable,i e,the damage variable before the final fracture of concrete of Di is slightly higher than that of Du.Meanwhile,the evolution of SR of concrete exposed to fatigue loads were analyzed and the relationship between SR and Du,SR and Di of concrete exposed to fatigue loads were established.It is found that the SR of concrete was decreased with the increasing fatigue cycles,indicating that surface electrical resistance method can also be applied to describe the damage of ballastless track concrete exposed to fatigue loads.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.51974082 and 52274377)the Fundamental Research Funds for the Central Universities(Grant No.N2209001)the Programme of Introducing Talents of Discipline Innovation to Universities 2.0(the 111 Project 2.0 of China,Grant No.BP0719037)。
文摘A transient 3D model was established to investigate the effect of spatial interaction of ultrasounds on the dual-frequency ultrasonic field in magnesium alloy melt.The effects of insertion depth and tip shape of the ultrasonic rods,input pressures and their ratio on the acoustic field distribution were discussed in detail.Additionally,the spacing,angle,and insertion depth of two ultrasonic rods significantly affect the interaction between distinct ultrasounds.As a result,various acoustic pressure distributions and cavitation regions are obtained.The spherical rods mitigate the longitudinal and transversal attenuation of acoustic pressure and expand the cavitation volume by 53.7%and 31.7%,respectively,compared to the plate and conical rods.Increasing the input pressure will enlarge the cavitation region but has no effect on the acoustic pressure distribution pattern.The acoustic pressure ratio significantly affects the pressure distribution and the cavitation region,and the best cavitation effect is obtained at the ratio of 2:1(P15:P20).
基金Australian Research Council,Grant/Award Numbers:DP190103660,DP200103207,LP180100663UniSQ Capacity Building Grants,Grant/Award Number:1008313。
文摘Biometric recognition is a widely used technology for user authentication.In the application of this technology,biometric security and recognition accuracy are two important issues that should be considered.In terms of biometric security,cancellable biometrics is an effective technique for protecting biometric data.Regarding recognition accuracy,feature representation plays a significant role in the performance and reliability of cancellable biometric systems.How to design good feature representations for cancellable biometrics is a challenging topic that has attracted a great deal of attention from the computer vision community,especially from researchers of cancellable biometrics.Feature extraction and learning in cancellable biometrics is to find suitable feature representations with a view to achieving satisfactory recognition performance,while the privacy of biometric data is protected.This survey informs the progress,trend and challenges of feature extraction and learning for cancellable biometrics,thus shedding light on the latest developments and future research of this area.
