Glued timber structure is one of the main forms of modern wood architecture,which has gradually developed towards mid-and high-rise buildings.Glue-laminated timber(GLT)is comprised of several laminates of parallel-to-...Glued timber structure is one of the main forms of modern wood architecture,which has gradually developed towards mid-and high-rise buildings.Glue-laminated timber(GLT)is comprised of several laminates of parallel-to-grain dimension lumber that are bonded together with durable,moisture resistant structural adhesives.GLT can be used in horizontal applications as a beam and in vertical applications as a post.So,its compressive performance has a significant impact on structural safety.Fiber reinforced polymers(FRPs)were commonly used to improve the bearing capacity of GLT components,and the structural and process parameters largely determined the reinforcement effect.This study was aimed at investigating the influence of structural and process parameters on the axial compression performance of GLT components.Three wrapping methods(middle-part,end-part and full wrapping)and three lengths(0.6,0.8,and 1.0 m)of wood post specimens were designed in this work and the axial compression performance and ductility of GLT post specimens modified by basalt fiber reinforced polymer(BFRP)were studied.The results showed that the effect of different BFRP wrapping methods on the compressive strength and elastic modulus of laminated wood was not statistically significant(P>0.05).The compressive bearing capacity of unreinforced GLT posts decreased with the increase of aspect ratio.The GLT posts with middle-part and end-part wrapping still followed this pattern,while the compressive bearing capacity of GLT posts with full wrapping showed a pattern of first decreasing and then increasing.For GLT with low aspect ratios(4.0 or 5.3),there was no correlation between the wrapping method and the compressive bearing capacity,while the compressive bearing capacity of GLT with a high aspect ratio(6.7)for middle-part,end-part and full wrapping increased by 3.5%,7.5%and 9.7%,respectively.Compared to the unreinforced group,the ultimate axial compressive strength and modulus of elasticity(MOE)of the 6-E series specimens reinforced at both ends decreased by 2.58%and 6.70%,respectively.The ultimate axial compressive strength of the 8-E specimens reinforced at both ends increased by 8.62%and the MOE decreased by 1.91%.The compressive strength of the 10-E specimens reinforced at both ends increased by 7.51%and the MOE increased by 8.14%.The failure modes of GLT with different aspects were consistent under the same BFRP wrapping,while the failure modes of GLT with the same aspect ratio were different for different BFRP wrapping methods.The ductility performance of GLT with different aspects ratio was improved by the BFRP wrapping.展开更多
Anchoring molecular cocatalysts on semiconductors has been recognized as a general strategy to boost the charge separation efficiency required for efficient photocatalysis.However,the effect of molecular cocatalysts o...Anchoring molecular cocatalysts on semiconductors has been recognized as a general strategy to boost the charge separation efficiency required for efficient photocatalysis.However,the effect of molecular cocatalysts on energy funneling(i.e.,directional energy transfer)inside semiconductor photocatalysts has not been demonstrated yet.Here we prepared CdS nanorods with both thin and thick rods and anchored the conjugated molecules 2‐mercaptobenzimidazole(MBI)and cobalt molecular catalysts(MCoA)sequentially onto the surface of nanorods.Transient absorption measurements revealed that MBI molecules facilitated energy funneling from thin to thick rods by the electronic coupling between thin and thick nanorods,which is essentially a light‐harvesting antenna approach to enhance the charge generation efficiency in the reaction center(here the thick rods).Moreover,MBI and MCoA molecules selectively extracted photogenerated holes and electrons of CdS nanorods rapidly,leading to efficient charge separation.Consequently,CdS/MBI/MCoA displayed 15 times enhanced photocatalytic H_(2) evolution(1.65 mL)than pure CdS(0.11 mL)over 3 h of illumination.The amount of H_(2) evolution reached 60 mL over 48 h of illumination with a high turnover number of 26294 and an apparent quantum efficiency of 71%at 420 nm.This study demonstrates a novel design principle for next‐generation photocatalysts.展开更多
文摘Glued timber structure is one of the main forms of modern wood architecture,which has gradually developed towards mid-and high-rise buildings.Glue-laminated timber(GLT)is comprised of several laminates of parallel-to-grain dimension lumber that are bonded together with durable,moisture resistant structural adhesives.GLT can be used in horizontal applications as a beam and in vertical applications as a post.So,its compressive performance has a significant impact on structural safety.Fiber reinforced polymers(FRPs)were commonly used to improve the bearing capacity of GLT components,and the structural and process parameters largely determined the reinforcement effect.This study was aimed at investigating the influence of structural and process parameters on the axial compression performance of GLT components.Three wrapping methods(middle-part,end-part and full wrapping)and three lengths(0.6,0.8,and 1.0 m)of wood post specimens were designed in this work and the axial compression performance and ductility of GLT post specimens modified by basalt fiber reinforced polymer(BFRP)were studied.The results showed that the effect of different BFRP wrapping methods on the compressive strength and elastic modulus of laminated wood was not statistically significant(P>0.05).The compressive bearing capacity of unreinforced GLT posts decreased with the increase of aspect ratio.The GLT posts with middle-part and end-part wrapping still followed this pattern,while the compressive bearing capacity of GLT posts with full wrapping showed a pattern of first decreasing and then increasing.For GLT with low aspect ratios(4.0 or 5.3),there was no correlation between the wrapping method and the compressive bearing capacity,while the compressive bearing capacity of GLT with a high aspect ratio(6.7)for middle-part,end-part and full wrapping increased by 3.5%,7.5%and 9.7%,respectively.Compared to the unreinforced group,the ultimate axial compressive strength and modulus of elasticity(MOE)of the 6-E series specimens reinforced at both ends decreased by 2.58%and 6.70%,respectively.The ultimate axial compressive strength of the 8-E specimens reinforced at both ends increased by 8.62%and the MOE decreased by 1.91%.The compressive strength of the 10-E specimens reinforced at both ends increased by 7.51%and the MOE increased by 8.14%.The failure modes of GLT with different aspects were consistent under the same BFRP wrapping,while the failure modes of GLT with the same aspect ratio were different for different BFRP wrapping methods.The ductility performance of GLT with different aspects ratio was improved by the BFRP wrapping.
文摘Anchoring molecular cocatalysts on semiconductors has been recognized as a general strategy to boost the charge separation efficiency required for efficient photocatalysis.However,the effect of molecular cocatalysts on energy funneling(i.e.,directional energy transfer)inside semiconductor photocatalysts has not been demonstrated yet.Here we prepared CdS nanorods with both thin and thick rods and anchored the conjugated molecules 2‐mercaptobenzimidazole(MBI)and cobalt molecular catalysts(MCoA)sequentially onto the surface of nanorods.Transient absorption measurements revealed that MBI molecules facilitated energy funneling from thin to thick rods by the electronic coupling between thin and thick nanorods,which is essentially a light‐harvesting antenna approach to enhance the charge generation efficiency in the reaction center(here the thick rods).Moreover,MBI and MCoA molecules selectively extracted photogenerated holes and electrons of CdS nanorods rapidly,leading to efficient charge separation.Consequently,CdS/MBI/MCoA displayed 15 times enhanced photocatalytic H_(2) evolution(1.65 mL)than pure CdS(0.11 mL)over 3 h of illumination.The amount of H_(2) evolution reached 60 mL over 48 h of illumination with a high turnover number of 26294 and an apparent quantum efficiency of 71%at 420 nm.This study demonstrates a novel design principle for next‐generation photocatalysts.
