Two new Mn(Ⅱ)coordination polymers,namely{[Mn_(2)(HL)(phen)_(3)(H_(2)O)_(2)]·7.5H_(2)O}_n(1)and[Mn_(4)(HL)_(2)(1,4-bib)_(3)(H_(2)O)_(2)]_n(2),were synthesized under hydrothermal conditions by using Mn(Ⅱ)ions an...Two new Mn(Ⅱ)coordination polymers,namely{[Mn_(2)(HL)(phen)_(3)(H_(2)O)_(2)]·7.5H_(2)O}_n(1)and[Mn_(4)(HL)_(2)(1,4-bib)_(3)(H_(2)O)_(2)]_n(2),were synthesized under hydrothermal conditions by using Mn(Ⅱ)ions and 6-(3',4'-dicarboxylphenoxy)-1,2,4-benzenetricarboxylic acid(H_(5)L)in the presence of N-auxiliary ligands 1,10-phenanthroline(phen)and1,4-bis(1H-imidazol-1-yl)benzene(1,4-bib).The structures of coordination polymers 1 and 2 were characterized by infrared spectroscopy,single-crystal X-ray diffraction,thermogravimetric analysis,and powder X-ray diffraction.Single-crystal X-ray diffraction reveals that 1 has a 1D chain structure based on binuclear Mn(Ⅱ)units,while 2 features a(3,8)-connected 3D network structure based on tetranuclear Mn(Ⅱ)units.Magnetic studies show that 1 and 2exhibit antiferromagnetic interactions between manganese ions.2 shows stronger antiferromagnetic interactions due to the shorter Mn…Mn distances within the tetranuclear manganese units.CCDC:2357601,1;2357602,2.展开更多
There is nonradiative recombination in waveguide region owing to severe carrier leakage,which in turn reduces output power and wall-plug efficiency.In this paper,we designed a novel epitaxial structure,which suppresse...There is nonradiative recombination in waveguide region owing to severe carrier leakage,which in turn reduces output power and wall-plug efficiency.In this paper,we designed a novel epitaxial structure,which suppresses carrier leakage by inserting n-Ga_(0.55)In_(0.45)P and p-GaAs_(0.6)P_(0.4) between barriers and waveguide layers,respectively,to modulate the energy band structure and to increase the height of barrier.The results show that the leakage current density reduces by 87.71%,compared to traditional structure.The nonradiative recombination current density of novel structure reduces to 37.411 A/cm^(2),and the output power reaches 12.80 W with wall-plug efficiency of 78.24%at an injection current density 5 A/cm^(2) at room temperature.In addition,the temperature drift coefficient of center wavelength is 0.206 nm/℃at the temperature range from 5℃to 65℃,and the slope of fitted straight line of threshold current with temperature variation is 0.00113.The novel epitaxial structure provides a theoretical basis for achieving high-power laser diode.展开更多
Al−3.51Mg−0.42Mn−0.76Sc−0.40Zr(wt.%)alloy was prepared by selective laser melting(SLM)method.The mechanical properties and microstructure of the alloy after annealing at 300℃or 325℃for 6 h were studied.The tensile s...Al−3.51Mg−0.42Mn−0.76Sc−0.40Zr(wt.%)alloy was prepared by selective laser melting(SLM)method.The mechanical properties and microstructure of the alloy after annealing at 300℃or 325℃for 6 h were studied.The tensile strength,yield strength and elongation of the SLM alloy were 339 MPa,213 MPa and 24%,respectively.After annealing at 300℃for 6 h,the tensile and yield strength of the alloy were increased to 518 MPa and 505 MPa,respectively,and the elongation decreased to 13%.After annealing at 325℃for 6 h,the yield strength of the alloy was reduced to 483 MPa.The grain size of the alloy after annealing at 300℃and 325℃did not grow significantly,but the segregation of Mg element was significantly reduced.Nanoscale Al3(Sc,Zr)phase was precipitated from the alloy matrix,and its average size increased with the increase of annealing temperature.Therefore,the strength improvement of the annealed SLM aluminum alloy was mainly attributed to the precipitation strengthening of Al3(Sc,Zr),and the strengthening mechanism was mainly dislocation cutting mechanism.When the annealing temperature was too high,the coarsening of Al3(Sc,Zr)particles caused the strength to decrease.展开更多
The mechanical,thermodynamic properties and electrical conductivities of L1_(2)-Al_(3)X(X=Zr,Sc,Er,Yb,Hf)structural phases in aluminum conductors were investigated through a first-principles study.The results demonstr...The mechanical,thermodynamic properties and electrical conductivities of L1_(2)-Al_(3)X(X=Zr,Sc,Er,Yb,Hf)structural phases in aluminum conductors were investigated through a first-principles study.The results demonstrate that all structural phases have good alloy-forming ability and structural stability,where Al_(3)Zr is the most superior.Al_(3)Zr,Al_(3)Hf and Al_(3)Sc have enhanced shear and deformation resistance in comparison to other phases.Within the temperature range of 200−600 K,Al_(3)Er and Al_(3)Yb possess the greatest thermodynamic stability,followed by Al_(3)Hf,Al_(3)Zr and Al_(3)Sc.Al_(3)Er and Al_(3)Yb have higher thermodynamic stability than Al_(3)Hf,Al_(3)Zr and Al_(3)Sc.All structural phases exhibit substantial metallic properties,indicating their good electrical conductivity.The electrical conductivities of Al_(3)Hf and Al_(3)Zr are higher than those of Al_(3)Er,Al_(3)Yb and Al_(3)Sc.The covalent bond properties in Al_(3)Sc,Al_(3)Er and Al_(3)Yb enhance the hardness,brittleness and thermodynamic stability of the structural phase.The thermodynamic stability of Al_(3)Sc is significantly reduced by ionic bonds.展开更多
To ensure the operational safety of railways in the landslide-prone areas of mountainous regions,a large-scale model test and numerical simulation were conducted to study the bending moment distribution,internal force...To ensure the operational safety of railways in the landslide-prone areas of mountainous regions,a large-scale model test and numerical simulation were conducted to study the bending moment distribution,internal force distribution,deformation development,and crack propagation characteristics of a framed anti-sliding structure(FAS)under landslide thrust up to the point of failure.Results show that the maximum bending moment and its increase rate in the fore pile are greater than those in the rear pile,with the maximum bending moment of the fore pile approximately 1.1 times that of the rear pile.When the FAS fails,the displacement at the top of the fore pile is significantly greater,about 1.27 times that of the rear pile in the experiment.Major cracks develop at locations corresponding to the peak bending moments.Small transverse cracks initially appear on the upper surface at the intersection between the primary beam and rear pile and then spread to the side of the structure.At the failure stage,major cracks are observed at the pil-beam intersections and near the anchor points.Strengthening flexural stiffness at intersections where major cracks occur can improve the overall thrust-deformation coordination of the FAS,thereby maximizing its performance.展开更多
Biocatalysis with nicotinamide adenine dinucleotide phosphate(NADP)-dependent oxidoreductases faces a challenge in improving the efficiency of the costly cofactor utilization.Although enzyme fusion can offer cofactor ...Biocatalysis with nicotinamide adenine dinucleotide phosphate(NADP)-dependent oxidoreductases faces a challenge in improving the efficiency of the costly cofactor utilization.Although enzyme fusion can offer cofactor regeneration,the high-volume input and limited cofactor recyclability still make the enzymatic processes unsustainable.Therefore,it is of great significance to reduce cofactor input in a fusion enzyme(FuE)system,but no successful practice has been reported.Herein,we design a decapeptide bridge,RRRQRRRARR(R10),with high affinity for NADPH to construct fusion oxidoreductases(phenylacetone monooxygenase and phosphite dehydrogenase)for ester synthesis and NADP recycling.The peptide bridge enables electrostatic cofactor channeling that transports NADPH/NADP^(+)across the peptide between the enzymes’NADP-binding pockets,so the fusion enzyme(FuE-R10)presents 2.1-folds and 2.0-folds higher conversions than mixed free enzymes and a flexible linker(GGGGSGGGGS)-fused enzyme,respectively,at NADPH/FuE of 0.1.The fusion enzyme,FuE-R5,bridged by a half-shortened linker,is proved more effective in facilitating cofactor channeling;compared to the mixed free enzymes,FuE-R5 exhibits two orders of magnitude reduction of NADPH input in ester synthesis.The work has thus demonstrated the potential of the cofactor bridging strategy in the development of sustainable cofactor-dependent cascade biocatalysis.展开更多
The effects of tungsten inert gas arc-assisted friction stir welding(TIG-FSW)on the microstructure,tensile properties and corrosion resistance of AA6016 and AA2519 alloys lap joints were investigated by means of optic...The effects of tungsten inert gas arc-assisted friction stir welding(TIG-FSW)on the microstructure,tensile properties and corrosion resistance of AA6016 and AA2519 alloys lap joints were investigated by means of optical microscope,scanning electron microscope,tensile test at room temperature,corrosion immersion tests and electrochemical measurements.The results show that the introduction of TIG arc during FSW process results in a more uniform microstructure of the joint with no tunnel hole defects.Furthermore,it enhances tensile strength and elongation of the joint with increased rates of 11.5%and 50.0%,respectively;meanwhile,the corrosion current density and largest corrosion depth are decreased with reduction rates of 78.2%and 45.7%,respectively.TIG-FSW can promote flow,contact and diffusion of materials,thus improving microstructure of the joint.Additionally,it reduces the size and number of secondary phase particles.Consequently,these factors contribute to the higher tensile properties and corrosion resistance of the joints.展开更多
Photothermal catalytic methane dry reforming(DRM)technology can convert greenhouse gases(i.e.CH_(4)and CO_(2))into syngas(i.e.H_(2)and CO),providing more opportunities for reducing the greenhouse effect and achieving ...Photothermal catalytic methane dry reforming(DRM)technology can convert greenhouse gases(i.e.CH_(4)and CO_(2))into syngas(i.e.H_(2)and CO),providing more opportunities for reducing the greenhouse effect and achieving carbon neutrality.In the DRM field,Ni-based catalysts attract wide attention due to their low cost and high activity.However,the carbon deposition over Ni-based catalysts always leads to rapid deactivation,which is still a main challenge.To improve the long-term stability of Ni-based catalysts,this work proposes a carbon-atom-diffusion strategy under photothermal conditions and investigates its effect on a Zn-doped Ni-based photothermal catalyst(Ni_(3)Zn@CeO_(2)).The photothermal catalytic behavior of Ni_(3)Zn@CeO_(2)can maintain more than 70 h in DRM reaction.And the photocatalytic DRM activity of Ni_(3)Zn@CeO_(2)is 1.2 times higher than thermal catalytic activity.Density functional theory(DFT)calculation and experimental characterizations indicate that Ni_(3)Zn promotes the diffusion of carbon atoms into the Ni_(3)Zn to form the Ni_(3)ZnC0.7 phase with body-centered cubic(bcc)structure,thus inhibiting carbon deposition.Further,in-situ diffuse reflectance infrared Fourier transform(DRIFT)spectroscopy and DFT calculation prove Ni_(3)Zn@CeO_(2)benefits the CH_(4)activation and inhibits the carbon deposition during the DRM process.Through inducing carbon atoms diffusion within the Ni_(3)Zn lattice,this work provides a straightforward and feasible strategy for achieving efficient photothermal catalytic DRM and even other CH_(4)conversion implementations with long-term stability.展开更多
Light-driven CO_(2) reduction reaction(CO_(2)RR)to value-added ethylene(C2H4)holds significant promise for addressing energy and environmental challenges.While the high energy barriers for*CO intermediates hydrogenati...Light-driven CO_(2) reduction reaction(CO_(2)RR)to value-added ethylene(C2H4)holds significant promise for addressing energy and environmental challenges.While the high energy barriers for*CO intermediates hydrogenation and C–C coupling limit the C_(2)H_(4)generation.Herein,CuxP/g-C_(3)N_(4) heterojunction prepared by an in-situ phosphating technique,achieved collaborative photocatalytic CO_(2) and H2O,producing CO and C_(2)H_(4)as the main products.Notably,the selectivity of C_(2)H_(4)produced by CuxP/g-C_(3)N_(4) attained to 64.25%,which was 9.85 times that of CuxP(6.52%).Detailed time-resolution photoluminescence spectra,femtosecond transient absorption spectroscopy tests and density functional theory(DFT)calculation validate the ultra-fast interfacial electron transfer mechanism in CuxP/g-C_(3)N_(4) heterojunction.Successive*H on P sites caused by adsorbed H2O splitting with moderate hydrogenation ability enables the multi-step hydrogenation during CO_(2)RR process over CuxP/g-C_(3)N_(4).With the aid of mediated asymmetric Cu and P dual sites by g-C_(3)N_(4) nanosheet,the produced*CHO shows an energetically favorable for C–C coupling.The coupling formed*CHOCHO further accepts photoexcited efficient e–and*H to deeply produce C_(2)H_(4)according to the C^(2+)intermediates,which has been detected by in-situ diffuse reflectance infrared Fourier transform spectroscopy and interpreted by DFT calculation.The novel insight mechanism offers an essential understanding for the development of CuxP-based heterojunctions for photocatalytic CO_(2) to C^(2+)value-added fuels.展开更多
Covalent organic frameworks(COFs)semiconductor materials have garnered significant attention in solar to chemical energy conversion owing to their unique properties,including structural tunability,pre-design capabilit...Covalent organic frameworks(COFs)semiconductor materials have garnered significant attention in solar to chemical energy conversion owing to their unique properties,including structural tunability,pre-design capability,large surface area,abundant pore structures,high crystallinity,excellent chemical stability,suitable energy-band structure,fast charge carrier transfer and so on.These intrinsic features endow COFs with the remarkable candidates for various photocatalytic applications including photocatalytic H_(2) generation from water reduction,CO_(2) reduction,degradation of organic pollutants,N_(2) fixation,H_(2)O_(2) evolution,and even organic synthesis.Here,this review comprehensively summarizes the recent advancements in COF-based materials for the above photocatalytic reactions,including the historic overview of the COF in the photocatalysis field,the fundamentals and design philosophy of COF-based photocatalysts,the advances of synthesis strategies,the structural characteristics and diversities,the practical applications in various photocatalytic fields as well as the challenges and future development direction in terms of COFs material and application perspectives.We sincerely hope this review can offer symbolic guidelines for future development COF semiconductor materials in this promising field.展开更多
Microstructural evolution and dynamic recrystallization(DRX)mechanisms of a Ti-48Al-2Cr-2Nb(at.%)alloy prepared by selective electron beam melting(SEBM)during hot deformation at 1150℃and 0.1 s^(-1)were investigated b...Microstructural evolution and dynamic recrystallization(DRX)mechanisms of a Ti-48Al-2Cr-2Nb(at.%)alloy prepared by selective electron beam melting(SEBM)during hot deformation at 1150℃and 0.1 s^(-1)were investigated by hot compression tests,optical microscope(OM),scanning electron microscope(SEM),electron back-scattered diffraction(EBSD)and transmission electron microscope(TEM).The results show that the initial microstructure of the as-SEBMed alloy exhibits layers of coarseγgrains and fineγ+α_(2)+(α_(2)/γ)lamellar mixture grains alternately along the building direction.During the early stage of hot deformation,deformation twins tend to form within the coarse grains,facilitating subsequent deformation,and a small number of DRX grains appear in the fine-grained regions.With the increase of strain,extensive DRX grains are formed through different DRX mechanisms in both coarse and fine-grained regions,involving discontinuous dynamic recrystallization mechanism(DDRX)in the fine-grained regions and a coexistence of DDRX and continuous dynamic recrystallization(CDRX)in the coarsegrained regions.展开更多
Copper matrix composites(CMCs)offer promising applications by combining the functional characteristics of copper with composite phases.With the rapid advancement in aerospace,microelectronics,and intelligent terminal ...Copper matrix composites(CMCs)offer promising applications by combining the functional characteristics of copper with composite phases.With the rapid advancement in aerospace,microelectronics,and intelligent terminal engineering,the demand for CMCs with superior mechanical and electrical properties has become increasingly critical.This paper reviews the design principles,preparation methods,microstructures and properties of some typical CMCs.The existing form of composite phases in the Cu matrix and their effects on microstructure evolution and comprehensive properties are summarised.Key underlying mechanisms governing these enhancements are discussed.The results provide a systematic understanding of the relationship between reinforcement phases and properties,offering insights for the future development of CMCs aimed to achieve much better comprehensive properties.The paper concludes by outlining the development trends and future outlook for the application of CMCs.展开更多
Aluminium alloy is one of the earliest and most widely used superplastic materials.The objective of this work is to review the scientific advances in superplastic Al alloys.Particularly,the emphasis is placed on the m...Aluminium alloy is one of the earliest and most widely used superplastic materials.The objective of this work is to review the scientific advances in superplastic Al alloys.Particularly,the emphasis is placed on the microstructural evolution and deformation mechanisms of Al alloys during superplastic deformation.The evolution of grain structure,texture,secondary phase,and cavities during superplastic flow in typical superplastic Al alloys is discussed in detail.The quantitative evaluation of different deformation mechanisms based on the focus ion beam(FIB)-assisted surface study provides new insights into the superplasticity of Al alloys.The main features,such as grain boundary sliding,intragranular dislocation slip,and diffusion creep can be observed intuitively and analyzed quantitatively.This study provides some reference for the research of superplastic deformation mechanism and the development of superplastic Al alloys.展开更多
The use of three-dimensional(3D)electrodes in water treatment is competitive because of their high catalytic efficiency,low energy consumption and promising development.The use of particle electrodes is a key research...The use of three-dimensional(3D)electrodes in water treatment is competitive because of their high catalytic efficiency,low energy consumption and promising development.The use of particle electrodes is a key research focus in this technology.They are usually in the form of particles that fill the space between the cathode and anode,and the selection of materials used is important.Carbon-based materials are widely used because of their large specific surface area,good adsorption performance,high chemical stability and low cost.The principles of 3D electrode technology are introduced and recent research on its use for degrading organic pollutants using carbon-based particle electrodes is summarized.The classification of particle electrodes is introduced and the challenges for the future development of carbon-based particle electrodes in wastewater treatment are discussed.展开更多
To study the ground motion intensity measures(IMs)suitable for the design of seismic performance with a focus on longitudinal resistance in tunnel structures,21 different seismic intensity parameters are selected for ...To study the ground motion intensity measures(IMs)suitable for the design of seismic performance with a focus on longitudinal resistance in tunnel structures,21 different seismic intensity parameters are selected for nonlinear calculation and analysis of tunnel structures,in order to determine the optimal IM for the longitudinal seismic performance of tunnel structures under different site conditions.An improved nonlinear beam-spring model is developed to calculate the longitudinal seismic response of tunnels.The PQ-Fiber model is used to simulate the longitudinal nonlinear behavior of tunnel structures and the tangential interactions between the tunnel and the soil is realized by load in the form of moment.Five different site types are considered and 21 IMs is evaluated against four criteria:effectiveness,practicality,usefulness,and sufficiency.The results indicate that the optimal IMs are significantly influenced by the site conditions.Specifically,sustained maximum velocity(V_(SM))emerges as the optimal IM for circular tunnels in soft soil conditions(CaseⅠsites),peak ground velocity(V PG)is best suited for CaseⅡsites,sustained maximum acceleration(A_(SM))is ideal for both CaseⅢand CaseⅤsites,and peak ground acceleration(A PG)for CaseⅣsites.As site conditions transition from CaseⅠto CaseⅤ,from soft to hard,the applicability of acceleration-type intensity parameters gradually decreases,while the applicability of velocity-type intensity parameters gradually increases.展开更多
Heterogeneous TiCl4/MgCl_(2) type Ziegler-Natta(Z-N)catalysts with unique advantages like low cost,high activity,high stereoregularity and pretty particle morphology,contribute to more than 130 Mt polyolefin large-sca...Heterogeneous TiCl4/MgCl_(2) type Ziegler-Natta(Z-N)catalysts with unique advantages like low cost,high activity,high stereoregularity and pretty particle morphology,contribute to more than 130 Mt polyolefin large-scale production.However,most researches related with heterogeneous Z-N catalysts focused onα-olefin polymerizations like ethylene,propylene,etc.展开更多
文摘Two new Mn(Ⅱ)coordination polymers,namely{[Mn_(2)(HL)(phen)_(3)(H_(2)O)_(2)]·7.5H_(2)O}_n(1)and[Mn_(4)(HL)_(2)(1,4-bib)_(3)(H_(2)O)_(2)]_n(2),were synthesized under hydrothermal conditions by using Mn(Ⅱ)ions and 6-(3',4'-dicarboxylphenoxy)-1,2,4-benzenetricarboxylic acid(H_(5)L)in the presence of N-auxiliary ligands 1,10-phenanthroline(phen)and1,4-bis(1H-imidazol-1-yl)benzene(1,4-bib).The structures of coordination polymers 1 and 2 were characterized by infrared spectroscopy,single-crystal X-ray diffraction,thermogravimetric analysis,and powder X-ray diffraction.Single-crystal X-ray diffraction reveals that 1 has a 1D chain structure based on binuclear Mn(Ⅱ)units,while 2 features a(3,8)-connected 3D network structure based on tetranuclear Mn(Ⅱ)units.Magnetic studies show that 1 and 2exhibit antiferromagnetic interactions between manganese ions.2 shows stronger antiferromagnetic interactions due to the shorter Mn…Mn distances within the tetranuclear manganese units.CCDC:2357601,1;2357602,2.
文摘There is nonradiative recombination in waveguide region owing to severe carrier leakage,which in turn reduces output power and wall-plug efficiency.In this paper,we designed a novel epitaxial structure,which suppresses carrier leakage by inserting n-Ga_(0.55)In_(0.45)P and p-GaAs_(0.6)P_(0.4) between barriers and waveguide layers,respectively,to modulate the energy band structure and to increase the height of barrier.The results show that the leakage current density reduces by 87.71%,compared to traditional structure.The nonradiative recombination current density of novel structure reduces to 37.411 A/cm^(2),and the output power reaches 12.80 W with wall-plug efficiency of 78.24%at an injection current density 5 A/cm^(2) at room temperature.In addition,the temperature drift coefficient of center wavelength is 0.206 nm/℃at the temperature range from 5℃to 65℃,and the slope of fitted straight line of threshold current with temperature variation is 0.00113.The novel epitaxial structure provides a theoretical basis for achieving high-power laser diode.
基金financially supported by the National Key Research and Development Program of China(No.2018YFB2001801)State’s Key Project of Research and Development Plan(No.2021YFC1910505)the Key Research and Development Program of Guangdong Province,China(No.2020B010186002)。
文摘Al−3.51Mg−0.42Mn−0.76Sc−0.40Zr(wt.%)alloy was prepared by selective laser melting(SLM)method.The mechanical properties and microstructure of the alloy after annealing at 300℃or 325℃for 6 h were studied.The tensile strength,yield strength and elongation of the SLM alloy were 339 MPa,213 MPa and 24%,respectively.After annealing at 300℃for 6 h,the tensile and yield strength of the alloy were increased to 518 MPa and 505 MPa,respectively,and the elongation decreased to 13%.After annealing at 325℃for 6 h,the yield strength of the alloy was reduced to 483 MPa.The grain size of the alloy after annealing at 300℃and 325℃did not grow significantly,but the segregation of Mg element was significantly reduced.Nanoscale Al3(Sc,Zr)phase was precipitated from the alloy matrix,and its average size increased with the increase of annealing temperature.Therefore,the strength improvement of the annealed SLM aluminum alloy was mainly attributed to the precipitation strengthening of Al3(Sc,Zr),and the strengthening mechanism was mainly dislocation cutting mechanism.When the annealing temperature was too high,the coarsening of Al3(Sc,Zr)particles caused the strength to decrease.
基金National Natural Science Foundation of China (No. 52274403)。
文摘The mechanical,thermodynamic properties and electrical conductivities of L1_(2)-Al_(3)X(X=Zr,Sc,Er,Yb,Hf)structural phases in aluminum conductors were investigated through a first-principles study.The results demonstrate that all structural phases have good alloy-forming ability and structural stability,where Al_(3)Zr is the most superior.Al_(3)Zr,Al_(3)Hf and Al_(3)Sc have enhanced shear and deformation resistance in comparison to other phases.Within the temperature range of 200−600 K,Al_(3)Er and Al_(3)Yb possess the greatest thermodynamic stability,followed by Al_(3)Hf,Al_(3)Zr and Al_(3)Sc.Al_(3)Er and Al_(3)Yb have higher thermodynamic stability than Al_(3)Hf,Al_(3)Zr and Al_(3)Sc.All structural phases exhibit substantial metallic properties,indicating their good electrical conductivity.The electrical conductivities of Al_(3)Hf and Al_(3)Zr are higher than those of Al_(3)Er,Al_(3)Yb and Al_(3)Sc.The covalent bond properties in Al_(3)Sc,Al_(3)Er and Al_(3)Yb enhance the hardness,brittleness and thermodynamic stability of the structural phase.The thermodynamic stability of Al_(3)Sc is significantly reduced by ionic bonds.
基金The National Natural Science Foundation of China(No.52078427).
文摘To ensure the operational safety of railways in the landslide-prone areas of mountainous regions,a large-scale model test and numerical simulation were conducted to study the bending moment distribution,internal force distribution,deformation development,and crack propagation characteristics of a framed anti-sliding structure(FAS)under landslide thrust up to the point of failure.Results show that the maximum bending moment and its increase rate in the fore pile are greater than those in the rear pile,with the maximum bending moment of the fore pile approximately 1.1 times that of the rear pile.When the FAS fails,the displacement at the top of the fore pile is significantly greater,about 1.27 times that of the rear pile in the experiment.Major cracks develop at locations corresponding to the peak bending moments.Small transverse cracks initially appear on the upper surface at the intersection between the primary beam and rear pile and then spread to the side of the structure.At the failure stage,major cracks are observed at the pil-beam intersections and near the anchor points.Strengthening flexural stiffness at intersections where major cracks occur can improve the overall thrust-deformation coordination of the FAS,thereby maximizing its performance.
文摘Biocatalysis with nicotinamide adenine dinucleotide phosphate(NADP)-dependent oxidoreductases faces a challenge in improving the efficiency of the costly cofactor utilization.Although enzyme fusion can offer cofactor regeneration,the high-volume input and limited cofactor recyclability still make the enzymatic processes unsustainable.Therefore,it is of great significance to reduce cofactor input in a fusion enzyme(FuE)system,but no successful practice has been reported.Herein,we design a decapeptide bridge,RRRQRRRARR(R10),with high affinity for NADPH to construct fusion oxidoreductases(phenylacetone monooxygenase and phosphite dehydrogenase)for ester synthesis and NADP recycling.The peptide bridge enables electrostatic cofactor channeling that transports NADPH/NADP^(+)across the peptide between the enzymes’NADP-binding pockets,so the fusion enzyme(FuE-R10)presents 2.1-folds and 2.0-folds higher conversions than mixed free enzymes and a flexible linker(GGGGSGGGGS)-fused enzyme,respectively,at NADPH/FuE of 0.1.The fusion enzyme,FuE-R5,bridged by a half-shortened linker,is proved more effective in facilitating cofactor channeling;compared to the mixed free enzymes,FuE-R5 exhibits two orders of magnitude reduction of NADPH input in ester synthesis.The work has thus demonstrated the potential of the cofactor bridging strategy in the development of sustainable cofactor-dependent cascade biocatalysis.
文摘The effects of tungsten inert gas arc-assisted friction stir welding(TIG-FSW)on the microstructure,tensile properties and corrosion resistance of AA6016 and AA2519 alloys lap joints were investigated by means of optical microscope,scanning electron microscope,tensile test at room temperature,corrosion immersion tests and electrochemical measurements.The results show that the introduction of TIG arc during FSW process results in a more uniform microstructure of the joint with no tunnel hole defects.Furthermore,it enhances tensile strength and elongation of the joint with increased rates of 11.5%and 50.0%,respectively;meanwhile,the corrosion current density and largest corrosion depth are decreased with reduction rates of 78.2%and 45.7%,respectively.TIG-FSW can promote flow,contact and diffusion of materials,thus improving microstructure of the joint.Additionally,it reduces the size and number of secondary phase particles.Consequently,these factors contribute to the higher tensile properties and corrosion resistance of the joints.
文摘Photothermal catalytic methane dry reforming(DRM)technology can convert greenhouse gases(i.e.CH_(4)and CO_(2))into syngas(i.e.H_(2)and CO),providing more opportunities for reducing the greenhouse effect and achieving carbon neutrality.In the DRM field,Ni-based catalysts attract wide attention due to their low cost and high activity.However,the carbon deposition over Ni-based catalysts always leads to rapid deactivation,which is still a main challenge.To improve the long-term stability of Ni-based catalysts,this work proposes a carbon-atom-diffusion strategy under photothermal conditions and investigates its effect on a Zn-doped Ni-based photothermal catalyst(Ni_(3)Zn@CeO_(2)).The photothermal catalytic behavior of Ni_(3)Zn@CeO_(2)can maintain more than 70 h in DRM reaction.And the photocatalytic DRM activity of Ni_(3)Zn@CeO_(2)is 1.2 times higher than thermal catalytic activity.Density functional theory(DFT)calculation and experimental characterizations indicate that Ni_(3)Zn promotes the diffusion of carbon atoms into the Ni_(3)Zn to form the Ni_(3)ZnC0.7 phase with body-centered cubic(bcc)structure,thus inhibiting carbon deposition.Further,in-situ diffuse reflectance infrared Fourier transform(DRIFT)spectroscopy and DFT calculation prove Ni_(3)Zn@CeO_(2)benefits the CH_(4)activation and inhibits the carbon deposition during the DRM process.Through inducing carbon atoms diffusion within the Ni_(3)Zn lattice,this work provides a straightforward and feasible strategy for achieving efficient photothermal catalytic DRM and even other CH_(4)conversion implementations with long-term stability.
文摘Light-driven CO_(2) reduction reaction(CO_(2)RR)to value-added ethylene(C2H4)holds significant promise for addressing energy and environmental challenges.While the high energy barriers for*CO intermediates hydrogenation and C–C coupling limit the C_(2)H_(4)generation.Herein,CuxP/g-C_(3)N_(4) heterojunction prepared by an in-situ phosphating technique,achieved collaborative photocatalytic CO_(2) and H2O,producing CO and C_(2)H_(4)as the main products.Notably,the selectivity of C_(2)H_(4)produced by CuxP/g-C_(3)N_(4) attained to 64.25%,which was 9.85 times that of CuxP(6.52%).Detailed time-resolution photoluminescence spectra,femtosecond transient absorption spectroscopy tests and density functional theory(DFT)calculation validate the ultra-fast interfacial electron transfer mechanism in CuxP/g-C_(3)N_(4) heterojunction.Successive*H on P sites caused by adsorbed H2O splitting with moderate hydrogenation ability enables the multi-step hydrogenation during CO_(2)RR process over CuxP/g-C_(3)N_(4).With the aid of mediated asymmetric Cu and P dual sites by g-C_(3)N_(4) nanosheet,the produced*CHO shows an energetically favorable for C–C coupling.The coupling formed*CHOCHO further accepts photoexcited efficient e–and*H to deeply produce C_(2)H_(4)according to the C^(2+)intermediates,which has been detected by in-situ diffuse reflectance infrared Fourier transform spectroscopy and interpreted by DFT calculation.The novel insight mechanism offers an essential understanding for the development of CuxP-based heterojunctions for photocatalytic CO_(2) to C^(2+)value-added fuels.
文摘Covalent organic frameworks(COFs)semiconductor materials have garnered significant attention in solar to chemical energy conversion owing to their unique properties,including structural tunability,pre-design capability,large surface area,abundant pore structures,high crystallinity,excellent chemical stability,suitable energy-band structure,fast charge carrier transfer and so on.These intrinsic features endow COFs with the remarkable candidates for various photocatalytic applications including photocatalytic H_(2) generation from water reduction,CO_(2) reduction,degradation of organic pollutants,N_(2) fixation,H_(2)O_(2) evolution,and even organic synthesis.Here,this review comprehensively summarizes the recent advancements in COF-based materials for the above photocatalytic reactions,including the historic overview of the COF in the photocatalysis field,the fundamentals and design philosophy of COF-based photocatalysts,the advances of synthesis strategies,the structural characteristics and diversities,the practical applications in various photocatalytic fields as well as the challenges and future development direction in terms of COFs material and application perspectives.We sincerely hope this review can offer symbolic guidelines for future development COF semiconductor materials in this promising field.
基金the financial supports from the Shaanxi Province Key Research and Development Projects,China(No.2023KXJ-071)the National Natural Science Foundation of China(Nos.52274402,52174381)。
文摘Microstructural evolution and dynamic recrystallization(DRX)mechanisms of a Ti-48Al-2Cr-2Nb(at.%)alloy prepared by selective electron beam melting(SEBM)during hot deformation at 1150℃and 0.1 s^(-1)were investigated by hot compression tests,optical microscope(OM),scanning electron microscope(SEM),electron back-scattered diffraction(EBSD)and transmission electron microscope(TEM).The results show that the initial microstructure of the as-SEBMed alloy exhibits layers of coarseγgrains and fineγ+α_(2)+(α_(2)/γ)lamellar mixture grains alternately along the building direction.During the early stage of hot deformation,deformation twins tend to form within the coarse grains,facilitating subsequent deformation,and a small number of DRX grains appear in the fine-grained regions.With the increase of strain,extensive DRX grains are formed through different DRX mechanisms in both coarse and fine-grained regions,involving discontinuous dynamic recrystallization mechanism(DDRX)in the fine-grained regions and a coexistence of DDRX and continuous dynamic recrystallization(CDRX)in the coarsegrained regions.
基金support by the Key-Area Research and Development Program of Guangdong Province,China(No.2024B0101080003)Hunan Provincial Natural Science Foundation of China(No.2024JJ2076)grants from the State Key Laboratory of Powder Metallurgy,Central South University,China.
文摘Copper matrix composites(CMCs)offer promising applications by combining the functional characteristics of copper with composite phases.With the rapid advancement in aerospace,microelectronics,and intelligent terminal engineering,the demand for CMCs with superior mechanical and electrical properties has become increasingly critical.This paper reviews the design principles,preparation methods,microstructures and properties of some typical CMCs.The existing form of composite phases in the Cu matrix and their effects on microstructure evolution and comprehensive properties are summarised.Key underlying mechanisms governing these enhancements are discussed.The results provide a systematic understanding of the relationship between reinforcement phases and properties,offering insights for the future development of CMCs aimed to achieve much better comprehensive properties.The paper concludes by outlining the development trends and future outlook for the application of CMCs.
文摘Aluminium alloy is one of the earliest and most widely used superplastic materials.The objective of this work is to review the scientific advances in superplastic Al alloys.Particularly,the emphasis is placed on the microstructural evolution and deformation mechanisms of Al alloys during superplastic deformation.The evolution of grain structure,texture,secondary phase,and cavities during superplastic flow in typical superplastic Al alloys is discussed in detail.The quantitative evaluation of different deformation mechanisms based on the focus ion beam(FIB)-assisted surface study provides new insights into the superplasticity of Al alloys.The main features,such as grain boundary sliding,intragranular dislocation slip,and diffusion creep can be observed intuitively and analyzed quantitatively.This study provides some reference for the research of superplastic deformation mechanism and the development of superplastic Al alloys.
文摘The use of three-dimensional(3D)electrodes in water treatment is competitive because of their high catalytic efficiency,low energy consumption and promising development.The use of particle electrodes is a key research focus in this technology.They are usually in the form of particles that fill the space between the cathode and anode,and the selection of materials used is important.Carbon-based materials are widely used because of their large specific surface area,good adsorption performance,high chemical stability and low cost.The principles of 3D electrode technology are introduced and recent research on its use for degrading organic pollutants using carbon-based particle electrodes is summarized.The classification of particle electrodes is introduced and the challenges for the future development of carbon-based particle electrodes in wastewater treatment are discussed.
基金National Key Research and Development Program of China(No.2022YFC3004300)the National Natural Science Foundation of China(No.52378475).
文摘To study the ground motion intensity measures(IMs)suitable for the design of seismic performance with a focus on longitudinal resistance in tunnel structures,21 different seismic intensity parameters are selected for nonlinear calculation and analysis of tunnel structures,in order to determine the optimal IM for the longitudinal seismic performance of tunnel structures under different site conditions.An improved nonlinear beam-spring model is developed to calculate the longitudinal seismic response of tunnels.The PQ-Fiber model is used to simulate the longitudinal nonlinear behavior of tunnel structures and the tangential interactions between the tunnel and the soil is realized by load in the form of moment.Five different site types are considered and 21 IMs is evaluated against four criteria:effectiveness,practicality,usefulness,and sufficiency.The results indicate that the optimal IMs are significantly influenced by the site conditions.Specifically,sustained maximum velocity(V_(SM))emerges as the optimal IM for circular tunnels in soft soil conditions(CaseⅠsites),peak ground velocity(V PG)is best suited for CaseⅡsites,sustained maximum acceleration(A_(SM))is ideal for both CaseⅢand CaseⅤsites,and peak ground acceleration(A PG)for CaseⅣsites.As site conditions transition from CaseⅠto CaseⅤ,from soft to hard,the applicability of acceleration-type intensity parameters gradually decreases,while the applicability of velocity-type intensity parameters gradually increases.
基金Supported by National Key Research and Development Program of China(2022 YFB 3704700(2022 YFB 3704702))Major Scientific and Technological Innovation Project of Shandong Province(2021 CXGC 010901)Taishan Scholar Program。
文摘Heterogeneous TiCl4/MgCl_(2) type Ziegler-Natta(Z-N)catalysts with unique advantages like low cost,high activity,high stereoregularity and pretty particle morphology,contribute to more than 130 Mt polyolefin large-scale production.However,most researches related with heterogeneous Z-N catalysts focused onα-olefin polymerizations like ethylene,propylene,etc.
