The transformation of aldose to ketose or common sugars into rare saccharides,including rare ketoses and aldoses,is of great value and interest to the food industry and for saccharidic biomass utilization,medicine,and...The transformation of aldose to ketose or common sugars into rare saccharides,including rare ketoses and aldoses,is of great value and interest to the food industry and for saccharidic biomass utilization,medicine,and the synthesis of drugs.Nowadays,high-fructose corn syrup(HFCS)is industrially produced in more than 10 million tons annually using immobilized glucose isomerase.Some low-calorie saccharides such as tagatose and psicose,which are becoming popular sweeteners,have also been produced on a pilot scale in order to replace sucrose and HFCS.However,current catalysts and catalytic processes are still difficult to utilize in biomass conversion and also have strong substrate dependence in producing high-value,rare sugars.Considering the specific reaction properties of saccharides and catalysts,since the pioneering discovery by Fischer,various catalysts and catalytic systems have been discovered or developed in attempts to extend the reaction pathways,improve the reaction efficiency,and to potentially produce commercial products.In this review,we trace the history of sugar isomerization/epimerization reactions and summarize the important breakthroughs for each reaction as well as the difficulties that remain unresolved to date.展开更多
Sodium borohydride(NaBH_(4)) is considered as the most potential hydrogen storage material for portable proton exchange membrane fuel cells(PEMFC)because of its high theoretical hydrogen capacity.However,the slow and ...Sodium borohydride(NaBH_(4)) is considered as the most potential hydrogen storage material for portable proton exchange membrane fuel cells(PEMFC)because of its high theoretical hydrogen capacity.However,the slow and poor kinetic stability of hydrogen generation from NaBH_(4) hydrolysis limits its application.There are two main factors influencing the kinetics stability of hydrogen generation from NaBH_(4).One factor is that the alkaline byproducts(NaBO_(2)) of the hydrolysis reaction can increase the pH of the solution,thus inhibiting the reaction process.It mainly happens in the NaBH_(4) solution hydrolysis system.Another factor is that the monotonous increase in reaction temperature leads to uncontrollable and unpredictable hydrolysis rates in the solid NaBH_(4) hydrolysis system.This is due to the excess heat generated from this exothermic reaction in the initial reaction of NaBH_(4) hydrolysis.In this perspective,we summarize the latest research progress in hydrogen generation from NaBH_(4) and emphasize the design principles of catalysts for hydrogen generation from NaBH_(4) solution and solid state NaBH_(4).The importance of carbon as catalyst support material for NaBH_(4) hydrolysis is also highlighted.展开更多
We present a quantum dynamics study on the isotope effects of hydro-gen transfer isomerization in the formic acid dimer,and this is achieved by multidimensional dy-namics calculations with an efficient quantum mechani...We present a quantum dynamics study on the isotope effects of hydro-gen transfer isomerization in the formic acid dimer,and this is achieved by multidimensional dy-namics calculations with an efficient quantum mechanical theoretical scheme developed by our group,on a full-dimensional neural network ab initio potential energy surface.The ground-state and fundamental tun-neling splittings for four deuterium isotopologues of formic acid dimer are considered,and the calculated results are in very good general agreement with the avail-able experimental measurements.Strong isotope effects are revealed,the mode-specific funda-mental excitation effects on the tunneling rate are evidently influenced by the deuterium sub-stitution of H atom with the substitution on the OH bond being more effective than on the CH bond.Our studies are helpful for acquiring a better understanding of isotope effects in the double-hydrogen transfer processes.展开更多
Birnessite M_(x)MnO_(2)(M=Na^(+),K^(+),etc.)has emerged as a promising alternative to the classical MnO_(2)material owing to its improved pseudocapacitive performance for energy storage.Understanding their structure–...Birnessite M_(x)MnO_(2)(M=Na^(+),K^(+),etc.)has emerged as a promising alternative to the classical MnO_(2)material owing to its improved pseudocapacitive performance for energy storage.Understanding their structure–property correlation is essential for the development and application of advanced supercapacitors.Herein,we adopt the crystal field theory and density functional simulation to reveal the structural dependence of the pseudocapacitive property of M_(x)MnO_(2).Attributing to the Jahn–Teller effect of Mn^(3+),the bandgap of Kx MnO_(2)can be tuned by changing the x value(i.e.,the Mn(III)/Mn(IV)ratio).Then,we design a narrow-bandgap K 0.25 MnO_(2)(0.84 eV),which affords a high capacitance of 415 F g^(-1)at 1 A g^(-1)and a desirable rate capability of 293 F g^(-1)at 20 A g^(-1).Operando Raman spectroscopy confirms that the Jahn–Teller induced structure evolution of[MnO_(6)]octahedron accounts for the superior pseudocapacitive behavior of K_(0.25)MnO_(2).This finding offers theoretical guidance to the design and application of birnessite materials for pseudocapacitors.展开更多
Highly active bifunctional oxygen electrocatalysts accelerate the development of high-performance Zn-air battery,but suffer from the mismatched activities of oxygen evolution reaction(OER)and oxygen reduced reaction(O...Highly active bifunctional oxygen electrocatalysts accelerate the development of high-performance Zn-air battery,but suffer from the mismatched activities of oxygen evolution reaction(OER)and oxygen reduced reaction(ORR).Herein,highly integrated bifunctional oxygen electrocatalysts,cobalt-tin alloys coated by nitrogen doped carbon(CoSn@NC)are prepared by MOFs-derived method.In this hybrid catalyst,the binary CoSn nanoalloys mainly contribute to highly active OER process while the Co(or Sn)-N-C serves as ORR active sites.Rational interaction between CoSn and NC donates more rapid reaction kinetics than Pt/C(ORR)and IrO_(2)(OER).Such CoSn@NC holds a promise as air-cathode electrocatalyst in Zn-air battery,superior to Pt/C+IrO_(2)catalyst.First-principles calculations predict that CoSn alloys can upgrade charge redistribution on NC and promote the transfer to reactants,thus optimizing the adsorption strength of oxygen-containing intermediates to boost the overall reactivity.The tuning of oxygenate adsorption by interactions between alloy and heteroatom-doped carbon can guide the design of bifunctional oxygen electrocatalysts.展开更多
The modulation of metal-support interfacial interaction is significant but challenging in the design of high-efficiency and high-stability supported catalysts.Here,we report a synthetic strategy to upgrade Cu-CeO_(2)i...The modulation of metal-support interfacial interaction is significant but challenging in the design of high-efficiency and high-stability supported catalysts.Here,we report a synthetic strategy to upgrade Cu-CeO_(2)interfacial interaction by the pyrolysis of mixed metal-organic framework(MOF)structure.The obtained highly dispersed Cu/CeO_(2)-MOF catalyst via this strategy was used to catalyze water-gas shift reaction(WGSR),which exhibited high activity of 40.5μmolCOgcat^(-1).s^(-1)at 300℃and high stability of about 120 h.Based on comprehensive studies of electronic structure,pyrolysis strategy has significant effect on enhancing metal-support interaction and then stabilizing interfacial Cu^(+)species under reaction conditions.Abundant Cu^(+)species and generated oxygen vacancies over Cu/CeO_(2)-MOF catalyst played a key role in CO molecule activation and H2O molecule dissociation,respectively.Both collaborated closely and then promoted WGSR catalytic performance in comparison with traditio nal supported catalysts.This study shall offer a robust approach to harvest highly dispersed catalysts with finely-tuned metal-support interactions for stabilizing the most interfacial active metal species in diverse heterogeneous catalytic reactions.展开更多
CsPbI_(2)Br perovskite solar cells(PSCs)have drawn tremendous attention due to their suitable bandgap,excellent photothermal stability,and great potential as an ideal candidate for top cells in tandem solar cells.Howe...CsPbI_(2)Br perovskite solar cells(PSCs)have drawn tremendous attention due to their suitable bandgap,excellent photothermal stability,and great potential as an ideal candidate for top cells in tandem solar cells.However,the abundant defects at the buried interface and perovskite layer induce severe charge recombination,resulting in the open-circuit voltage(V_(oc))output and stability much lower than anticipated.Herein,a novel buried interface management strategy is developed to regulate interfacial carrier dynamics and CsPbI_(2)Br defects by introducing ammonium tetrafluoroborate(NH_(4)BF_(4)),thereby resulting in both high CsPbI_(2)Br crystallization and minimized interfacial energy losses.Specifically,NH_(4)^(+)ions could preferentially heal hydroxyl groups on the SnO_(2)surface and balance energy level alignment between SnO_(2)and CsPbI_(2)Br,enhancing charge transport efficiency,while BF_(4)^(-)anions as a quasi-halogen regulate crystal growth of CsPbI_(2)Br,thus reducing perovskite defects.Additionally,it is proved that eliminating hydroxyl groups at the buried interface enhances the iodide migration activation energy of CsPbI_(2)Br for strengthening the phase stability.As a result,the optimized CsPbI_(2)Br PSCs realize a remarkable efficiency of 17.09%and an ultrahigh V_(oc)output of 1.43 V,which is one of the highest values for CsPbI_(2)Br PSCs.展开更多
Cobalt phthalocyanine-graphene(CoPc-Gr) complex are fabricated through π-π interaction of each components,with CoPc adsorbed/inserted on/in the graphene sheets.The obtained complex could be used in the electro-chemi...Cobalt phthalocyanine-graphene(CoPc-Gr) complex are fabricated through π-π interaction of each components,with CoPc adsorbed/inserted on/in the graphene sheets.The obtained complex could be used in the electro-chemical detection of various medicines.CoPc-Gr modified glassy electrode shows excellent response to the electro-oxidation of dopamine(DA) and ascorbic acid(AA),much better than those of CoPc,graphene oxide(GrO) or graphene(Gr) modified electrode.Significantly,the detection of dopamine is a diffusion-controlled process,highly selective,and has a low detection limit and broad linear range.展开更多
Hydrogenation of N-ethylcarbazole(NEC),the hydrogen lean form of a liquid organic hydrogen carrier,on TiO2 supported Ru-Ni bimetallic catalysts is investigated.Crystal structure of TiO2 plays a critical role on the hy...Hydrogenation of N-ethylcarbazole(NEC),the hydrogen lean form of a liquid organic hydrogen carrier,on TiO2 supported Ru-Ni bimetallic catalysts is investigated.Crystal structure of TiO2 plays a critical role on the hydrogenation activity and selectivity towards fully hydrogenated product.Ru/anatase catalyst exhibits higher selectivity but lower reactivity compared to Ru/rutile catalyst.Ni addition significantly promotes the performance of Ru/anatase catalyst while causes severe performance deterioration of Ru/rutile catalyst.Commercial P25,a mixture of anatase and rutile phases in approximate ratio A/R1/4,is found to be the best TiO2 support for NEC hydrogenation.Ru/P25 catalyst outperforms both Ru/rutile and Ru/anatase and its activity can be further slightly improved by Ni addition.The unexpected synergism between the two different TiO2 phases for Ru based NEC hydrogenation catalysts is related to metal-support interaction and Ru-Ni interaction.展开更多
Lithium metal attracts growing attention as an ideal anode candidate for next generation lithium battery systems owing to its high capacity,low density,and low working potential.However,the volume expansion of the bul...Lithium metal attracts growing attention as an ideal anode candidate for next generation lithium battery systems owing to its high capacity,low density,and low working potential.However,the volume expansion of the bulk and dendrite growth on the surface of lithium anode limits its practical application.Herein,we fabricate a composite lithium host featuring both multiple scaled structure and lithiophilic property to address obstacles at both aspects of bulk and surface simultaneously.In which,the multiple scaled structure provides void space to accommodate lithium volume change while zinc and cobalt oxides sites derived from Zeolitic Imidazolate Frameworks can react with lithium and form a stable solid electrolyte interphase,leading to a stable cycling of lithium symmetrical cell for more than 500 cycles with voltage hysteresis of only 88 mV at 2 mAcm^-2 and 5 mAh cm^-2.Moreover,full cells paired with LiFePO4 cathode can realize 500 cycles with 99.2%capacity retention,showing great potential for practical applications.The excellent electrochemical performance of the composite lithium anode proves the effectiveness of our anode design with multiple scaled structure and lithiophilic feature,which can be also expanded to other metal anodes for batteries.展开更多
Lithium-sulfur(Li-S) batteries belong to one of the promising technologies for high-energy-density rechargeable batteries.However,sulfur cathodes suffer from inherent problems of its poor electronic conductivity and t...Lithium-sulfur(Li-S) batteries belong to one of the promising technologies for high-energy-density rechargeable batteries.However,sulfur cathodes suffer from inherent problems of its poor electronic conductivity and the shuttling of highly dissoluble lithium polysulfides generated during the cycles.Loading sulfur into porous carbons has been proved to be an effective approach to alleviate these issues.Mesoporous and microporous carbons have been widely used for sulfur accommodation,but mesoporous carbons have poor sulfur confinement,whereas microporous carbons are impeded by low sulfur loading rates.Here,a core-shell carbon,combining both the merits of mesoporous carbon with large pore volume and microporous carbon with effective sulfur confinement,was prepared by coating the mesoporous CMK-3 with a microporous carbon(MPC) shell and served as the carbon host(CMK-3 @MPC) to accommodate sulfur.After sulfur infusion,the as-obtained S/(CMK-3@MPC) cathode delivered a high initial capacity of up to 1422 mAh·g^(-1) and sustained 654 mAh·g^(-1) reversible specific capacity after 36 cycles at 0.1 C.The good performance is ascribed to the unique core-shell structure of the CMK-3@MPC matrix,in which sulfur can be effectively confined within the meso/microporous carbon host,thus achieving simultaneously high electrochemical utilization.展开更多
The effect of chloride ions on a monoclinic ZrO2-supported RuOx(RuOx/m-ZrO2) catalyst with a Ru surface density of 0.3 Ru/nm2 was studied in the selective oxidation of methanol to methyl formate(MF) at a low tempe...The effect of chloride ions on a monoclinic ZrO2-supported RuOx(RuOx/m-ZrO2) catalyst with a Ru surface density of 0.3 Ru/nm2 was studied in the selective oxidation of methanol to methyl formate(MF) at a low temperature of 373 K.The m-ZrO2 support was Cl-free,and Cl- ions were introduced into the RuOx/m-ZrO2 catalyst by impregnation with zirconium oxychloride or ammonium chloride and subsequent thermal treatment in air at 673 K.The structures of these catalysts were characterized by X-ray diffraction,Raman and X-ray photoelectron spectroscopies.Their reducibility was probed by temperature-programmed reduction in H2.The RuOx domains were present as highly dispersed RuO42- structure on m-ZrO2 with similar reducibility for the RuOx/m-ZrO2 samples irrespective of modification with or without Cl- ions.Introduction of appropriate amounts of zirconium oxychloride into RuOx/m-ZrO2 led to a remarkable increase in the methanol oxidation rate and MF selectivity,whereas introduction of ammonium chloride or zirconyl nitrate significantly inhibited the catalytic performance of RuOx/m-ZrO2.The promoting effect of Cl- ions derived from zirconium oxychloride can be tentatively attributed to their roles in facilitating the adsorption of methanol and desorption of MF product or its intermediates.This finding provides novel insights into the promoting effect of Cl ions on oxides-based catalysts for selective oxidation reactions.展开更多
The ZnO-modified TiO 2 electrode was prepared by adding Zn(CH 3 COO) 2 ·2H 2 O to the TiO 2 colloid during the sol-gel production process,and was used in dye-sensitized solar cells (DSCs).The open circuit voltage...The ZnO-modified TiO 2 electrode was prepared by adding Zn(CH 3 COO) 2 ·2H 2 O to the TiO 2 colloid during the sol-gel production process,and was used in dye-sensitized solar cells (DSCs).The open circuit voltage (V OC) and fill factor (ff) of the cells were improved significantly.The performances of the ZnO-modified TiO 2 electrode such as dark current,transient photocurrent,impedance,absorption spectra,and flat band potential (V fb) were investigated.It is found that the interface charge recombination impedance increases and V fb shifts about 200 mV toward the cathodic potential.The effect mechanism of ZnO modification on the performance of DSCs may be that ZnO occupies the surface states of the TiO 2 film.展开更多
As the development of smart electronics, self-powered sources have been attracting increasing attention.This review summarizes research progress of photovoltaic fibers and their integrated power sources with multi-sta...As the development of smart electronics, self-powered sources have been attracting increasing attention.This review summarizes research progress of photovoltaic fibers and their integrated power sources with multi-stage energy conversion. Recent development of three dimensional photovoltaic fibers is glanced with special attention to structure design and materials of typical photovoltaic types(inorganic, organic,dye/quantum dot sensitized and perovskite solar cells). The application of carbon materials in fiber energy is focused as it is a hot topic recently. The hybrid energy systems based on fiber solar cells and fiber supercapacitors, fiber batteries and fiber nanogenerators are summarized together with hybrid energy textiles. This review provides a macroscopic view of novel energy fibers and will attract research interest in flexible/wearable fiber electronics and energy textiles.展开更多
Photochemical smog characterized by high concentrations of ozone(O_(3)) is a serious air pollution issue in the North China Plain(NCP)region,especially in summer and autumn.For this study,measurements of O_(3),nitroge...Photochemical smog characterized by high concentrations of ozone(O_(3)) is a serious air pollution issue in the North China Plain(NCP)region,especially in summer and autumn.For this study,measurements of O_(3),nitrogen oxides(NO_(x)),volatile organic compounds(VOCs),carbon monoxide(CO),nitrous acid(HONO),and a number of key physical parameters were taken at a suburban site,Xianghe,in the NCP region during the summer of 2018 in order to better understand the photochemical processes leading to O_(3)formation and find an optimal way to control O_(3)pollution.Here,the radical chemistry and O_(3)photochemical budget based on measurement data from 1−23 July using a chemical box model is investigated.The daytime(0600−1800 LST)average production rate of the primary radicals referred to as RO_(x)(OH+HO2+RO2)is 3.9 ppbv h−1.HONO photolysis is the largest primary RO_(x)source(41%).Reaction of NO2+OH is the largest contributor to radical termination(41%),followed by reactions of RO2+NO2(26%).The average diurnal maximum O_(3)production and loss rates are 32.9 ppbv h−1 and 4.3 ppbv h−1,respectively.Sensitivity tests without the HONO constraint lead to decreases in daytime average primary RO_(x)production by 55%and O_(3)photochemical production by 42%,highlighting the importance of accurate HONO measurements when quantifying the RO_(x)budget and O_(3)photochemical production.Considering heterogeneous reactions of trace gases and radicals on aerosols,aerosol uptake of HO2 contributes 11%to RO_(x)sink,and the daytime average O_(3)photochemical production decreases by 14%.The O_(3)-NO_(x)-VOCs sensitivity shows that the O_(3)production at Xianghe during the investigation period is mainly controlled by VOCs.展开更多
Research on asymmetric A–D–A structured non-fullerene acceptors has lagged far behind the development of symmetric counterpart.In this contribution,by simply replacing one sulfur atom in indacenodithiophene unit wit...Research on asymmetric A–D–A structured non-fullerene acceptors has lagged far behind the development of symmetric counterpart.In this contribution,by simply replacing one sulfur atom in indacenodithiophene unit with a selenium atom,an asymmetric building block Se PT and a corresponding asymmetric non-fullerene acceptor Se PT-IN have been developed.Asymmetric Se PT-IN achieved a high efficiency of 10.20% in organic solar cells when blended with PBT1-C,much higher than that of symmetric TPT-IN counterpart(8.91%).Our results demonstrated an effective heteroatom substitution strategy to develop asymmetric A–D–A structured non-fullerene acceptors.展开更多
Large surface area,high conductivity,and rich active site of carbon electrode materials are necessary characteristics for energy storage devices.However,high conductivity and high nitrogen doping of carbon electrode m...Large surface area,high conductivity,and rich active site of carbon electrode materials are necessary characteristics for energy storage devices.However,high conductivity and high nitrogen doping of carbon electrode materials are difficult to coordinate.Here,a facile method via the carbonization of nitrogen-containing Schiff base polymer has been developed to prepare high conductivity and high nitrogen-doped hierarchical porous carbon.The organic components with a benzene ring structure in the polymer promote the formation of more sp^(2)-graphitized carbon,which is beneficial for the improvement of electrical conductivity.Nitrogen-doped hierarchical porous carbon calcined at 900℃ under the NH3 atmosphere possesses high nitrogen content of 7.48 at%,a large specific surface area of 1613.2m2/g,and high electrical conductivity of 2.7 S/cm.As electrode materials in an aqueous-based supercapacitor,nitrogen-doped hierarchical porous carbon exhibits superior specific capacitance of 385 F/g at 1 A/g as well as excellent rate performance(242 and 215 F/g at a current density of 100 and 200 A/g,respectively).In addition,the specific capacitance of electrode measured in a two-electrode system is 335 F/g at 1 A/g,and the long-term cycling stability can be achieved with more than 94%initial capacitance after 10000 cycles.The constructed symmetric supercapacitor delivers high energy density and high power density.The outstanding electrochemical performances combined with the novel and scalable synthetic approach make the nitrogen‐doped hierarchical porous carbon potential electrode material for electrochemical devices.展开更多
The modification mechanism of the water/alcohol cathode interlayer is one of the most complicated problems in the field of organic photovoltaics,which has not been clearly elucidated yet;this greatly restricts the fur...The modification mechanism of the water/alcohol cathode interlayer is one of the most complicated problems in the field of organic photovoltaics,which has not been clearly elucidated yet;this greatly restricts the further enhancement of the PCE for polymer solar cells.Herein,we clarified the different effects of PFN and its derivatives,namely,poly[(9,9-bis(3’-((N,N-dimethyl)-N-ethylammonium)-propyl)-2,7-fluorene)-alt-2,7-(9,9-dioctylfluorene)](PFN-Br) in modifying fullerene-free PSCs.It is found for the first time that doping on IT-4F by the amino group of PFN leads to the unfavorable charge accumulation,and hence,forms a dense layer of electronegative molecule due to the poor electron transport capacity of the non-fullerene acceptor IT-4F.The electronegative molecular layer can block the electron transfer from the active layer to the interlayer and cause serious charge recombination at the active layer/cathode interface.This mechanism could be verified by the ESR measurement and electron-only devices.By replacing PFN with PFN-Br,the excessive doping effect between the cathode interlayer and IT-4F is eliminated,by which the charge transport and collection can be greatly improved.As a result,a high PCE of 13.5%was achieved in the fullerene-free PSCs.展开更多
基金Financial support by Dual Initiative Project of Jiangsu Province and Changzhou University is gratefully acknowledgedSample analysis supported by Analysis and Testing Center,NERC Biomass of Changzhou University was also greatly acknowledged.
文摘The transformation of aldose to ketose or common sugars into rare saccharides,including rare ketoses and aldoses,is of great value and interest to the food industry and for saccharidic biomass utilization,medicine,and the synthesis of drugs.Nowadays,high-fructose corn syrup(HFCS)is industrially produced in more than 10 million tons annually using immobilized glucose isomerase.Some low-calorie saccharides such as tagatose and psicose,which are becoming popular sweeteners,have also been produced on a pilot scale in order to replace sucrose and HFCS.However,current catalysts and catalytic processes are still difficult to utilize in biomass conversion and also have strong substrate dependence in producing high-value,rare sugars.Considering the specific reaction properties of saccharides and catalysts,since the pioneering discovery by Fischer,various catalysts and catalytic systems have been discovered or developed in attempts to extend the reaction pathways,improve the reaction efficiency,and to potentially produce commercial products.In this review,we trace the history of sugar isomerization/epimerization reactions and summarize the important breakthroughs for each reaction as well as the difficulties that remain unresolved to date.
基金supported by MOST of China(No.2021YFB4000603)NSFC(No.22179002 and 51971004).
文摘Sodium borohydride(NaBH_(4)) is considered as the most potential hydrogen storage material for portable proton exchange membrane fuel cells(PEMFC)because of its high theoretical hydrogen capacity.However,the slow and poor kinetic stability of hydrogen generation from NaBH_(4) hydrolysis limits its application.There are two main factors influencing the kinetics stability of hydrogen generation from NaBH_(4).One factor is that the alkaline byproducts(NaBO_(2)) of the hydrolysis reaction can increase the pH of the solution,thus inhibiting the reaction process.It mainly happens in the NaBH_(4) solution hydrolysis system.Another factor is that the monotonous increase in reaction temperature leads to uncontrollable and unpredictable hydrolysis rates in the solid NaBH_(4) hydrolysis system.This is due to the excess heat generated from this exothermic reaction in the initial reaction of NaBH_(4) hydrolysis.In this perspective,we summarize the latest research progress in hydrogen generation from NaBH_(4) and emphasize the design principles of catalysts for hydrogen generation from NaBH_(4) solution and solid state NaBH_(4).The importance of carbon as catalyst support material for NaBH_(4) hydrolysis is also highlighted.
基金supported by the National Natural Sci-ence Foundation of China(No.21973098 and No.22133003)the Beijing National Laboratory for Molecular SciencesJianwei Cao acknowledges the Youth Innovation Promotion Association CAS(No.2018045).
文摘We present a quantum dynamics study on the isotope effects of hydro-gen transfer isomerization in the formic acid dimer,and this is achieved by multidimensional dy-namics calculations with an efficient quantum mechanical theoretical scheme developed by our group,on a full-dimensional neural network ab initio potential energy surface.The ground-state and fundamental tun-neling splittings for four deuterium isotopologues of formic acid dimer are considered,and the calculated results are in very good general agreement with the avail-able experimental measurements.Strong isotope effects are revealed,the mode-specific funda-mental excitation effects on the tunneling rate are evidently influenced by the deuterium sub-stitution of H atom with the substitution on the OH bond being more effective than on the CH bond.Our studies are helpful for acquiring a better understanding of isotope effects in the double-hydrogen transfer processes.
基金supported by Ministry of Science and Technology of China(2016YFA0201904)National Natural Science Foundation of China(21631002,52172219,51872192)+3 种基金Projects of International Cooperation and Exchanges NSFC(22120102004)Beijing National Laboratory for Molecular Sciences(BNLMS-CXTD-202001)the Jiangsu Natural Science Foundation(No.BK20180002)Fundamental Research Program of Shanxi Province(202103021223019).
文摘Birnessite M_(x)MnO_(2)(M=Na^(+),K^(+),etc.)has emerged as a promising alternative to the classical MnO_(2)material owing to its improved pseudocapacitive performance for energy storage.Understanding their structure–property correlation is essential for the development and application of advanced supercapacitors.Herein,we adopt the crystal field theory and density functional simulation to reveal the structural dependence of the pseudocapacitive property of M_(x)MnO_(2).Attributing to the Jahn–Teller effect of Mn^(3+),the bandgap of Kx MnO_(2)can be tuned by changing the x value(i.e.,the Mn(III)/Mn(IV)ratio).Then,we design a narrow-bandgap K 0.25 MnO_(2)(0.84 eV),which affords a high capacitance of 415 F g^(-1)at 1 A g^(-1)and a desirable rate capability of 293 F g^(-1)at 20 A g^(-1).Operando Raman spectroscopy confirms that the Jahn–Teller induced structure evolution of[MnO_(6)]octahedron accounts for the superior pseudocapacitive behavior of K_(0.25)MnO_(2).This finding offers theoretical guidance to the design and application of birnessite materials for pseudocapacitors.
基金This work was financially supported by Shanghai Science and Technology Innovation Action Plan(Program No.20DZ1204400)the Key Research Program of Frontier Science,Chinese Academy of Sciences(Grant No.QYZDJSSW-JSC013).
文摘Highly active bifunctional oxygen electrocatalysts accelerate the development of high-performance Zn-air battery,but suffer from the mismatched activities of oxygen evolution reaction(OER)and oxygen reduced reaction(ORR).Herein,highly integrated bifunctional oxygen electrocatalysts,cobalt-tin alloys coated by nitrogen doped carbon(CoSn@NC)are prepared by MOFs-derived method.In this hybrid catalyst,the binary CoSn nanoalloys mainly contribute to highly active OER process while the Co(or Sn)-N-C serves as ORR active sites.Rational interaction between CoSn and NC donates more rapid reaction kinetics than Pt/C(ORR)and IrO_(2)(OER).Such CoSn@NC holds a promise as air-cathode electrocatalyst in Zn-air battery,superior to Pt/C+IrO_(2)catalyst.First-principles calculations predict that CoSn alloys can upgrade charge redistribution on NC and promote the transfer to reactants,thus optimizing the adsorption strength of oxygen-containing intermediates to boost the overall reactivity.The tuning of oxygenate adsorption by interactions between alloy and heteroatom-doped carbon can guide the design of bifunctional oxygen electrocatalysts.
基金sponsored by the National Key R&D Program of China(2021YFA1501100)the National Natural Science Foundation of China(21832001 and 22293042)the Beijing National Laboratory for Molecular Sciences(BNLMS-CXXM-202104)。
文摘The modulation of metal-support interfacial interaction is significant but challenging in the design of high-efficiency and high-stability supported catalysts.Here,we report a synthetic strategy to upgrade Cu-CeO_(2)interfacial interaction by the pyrolysis of mixed metal-organic framework(MOF)structure.The obtained highly dispersed Cu/CeO_(2)-MOF catalyst via this strategy was used to catalyze water-gas shift reaction(WGSR),which exhibited high activity of 40.5μmolCOgcat^(-1).s^(-1)at 300℃and high stability of about 120 h.Based on comprehensive studies of electronic structure,pyrolysis strategy has significant effect on enhancing metal-support interaction and then stabilizing interfacial Cu^(+)species under reaction conditions.Abundant Cu^(+)species and generated oxygen vacancies over Cu/CeO_(2)-MOF catalyst played a key role in CO molecule activation and H2O molecule dissociation,respectively.Both collaborated closely and then promoted WGSR catalytic performance in comparison with traditio nal supported catalysts.This study shall offer a robust approach to harvest highly dispersed catalysts with finely-tuned metal-support interactions for stabilizing the most interfacial active metal species in diverse heterogeneous catalytic reactions.
基金supported by the National Natural Science Foundation of China(22379010,22109166,22309191)Chinese Academy of Sciences。
文摘CsPbI_(2)Br perovskite solar cells(PSCs)have drawn tremendous attention due to their suitable bandgap,excellent photothermal stability,and great potential as an ideal candidate for top cells in tandem solar cells.However,the abundant defects at the buried interface and perovskite layer induce severe charge recombination,resulting in the open-circuit voltage(V_(oc))output and stability much lower than anticipated.Herein,a novel buried interface management strategy is developed to regulate interfacial carrier dynamics and CsPbI_(2)Br defects by introducing ammonium tetrafluoroborate(NH_(4)BF_(4)),thereby resulting in both high CsPbI_(2)Br crystallization and minimized interfacial energy losses.Specifically,NH_(4)^(+)ions could preferentially heal hydroxyl groups on the SnO_(2)surface and balance energy level alignment between SnO_(2)and CsPbI_(2)Br,enhancing charge transport efficiency,while BF_(4)^(-)anions as a quasi-halogen regulate crystal growth of CsPbI_(2)Br,thus reducing perovskite defects.Additionally,it is proved that eliminating hydroxyl groups at the buried interface enhances the iodide migration activation energy of CsPbI_(2)Br for strengthening the phase stability.As a result,the optimized CsPbI_(2)Br PSCs realize a remarkable efficiency of 17.09%and an ultrahigh V_(oc)output of 1.43 V,which is one of the highest values for CsPbI_(2)Br PSCs.
基金supported by the National Natural Science Foundation of China (Grant No. 20773121 and No. 21176221)the National Basic Research in "Climbing" Program of China (Grant No. 2011CB201402)
文摘Cobalt phthalocyanine-graphene(CoPc-Gr) complex are fabricated through π-π interaction of each components,with CoPc adsorbed/inserted on/in the graphene sheets.The obtained complex could be used in the electro-chemical detection of various medicines.CoPc-Gr modified glassy electrode shows excellent response to the electro-oxidation of dopamine(DA) and ascorbic acid(AA),much better than those of CoPc,graphene oxide(GrO) or graphene(Gr) modified electrode.Significantly,the detection of dopamine is a diffusion-controlled process,highly selective,and has a low detection limit and broad linear range.
基金NSFC (Nos. 21771006, U1607126 and 51771002)MOST of China (No. 2017YFB0405902)Beijing Municipal Commission of Science and Technology (Z17110000091702)
文摘Hydrogenation of N-ethylcarbazole(NEC),the hydrogen lean form of a liquid organic hydrogen carrier,on TiO2 supported Ru-Ni bimetallic catalysts is investigated.Crystal structure of TiO2 plays a critical role on the hydrogenation activity and selectivity towards fully hydrogenated product.Ru/anatase catalyst exhibits higher selectivity but lower reactivity compared to Ru/rutile catalyst.Ni addition significantly promotes the performance of Ru/anatase catalyst while causes severe performance deterioration of Ru/rutile catalyst.Commercial P25,a mixture of anatase and rutile phases in approximate ratio A/R1/4,is found to be the best TiO2 support for NEC hydrogenation.Ru/P25 catalyst outperforms both Ru/rutile and Ru/anatase and its activity can be further slightly improved by Ni addition.The unexpected synergism between the two different TiO2 phases for Ru based NEC hydrogenation catalysts is related to metal-support interaction and Ru-Ni interaction.
基金the National Natural Science Foundation of China(21771018,21875004)Beijing University of Chemical Technology(start-up grant buctrc201901,BUCT,China)Technology Innovation Project of New Energy Vehicles Industry and Pulead Technology Industry Co.Ltd。
文摘Lithium metal attracts growing attention as an ideal anode candidate for next generation lithium battery systems owing to its high capacity,low density,and low working potential.However,the volume expansion of the bulk and dendrite growth on the surface of lithium anode limits its practical application.Herein,we fabricate a composite lithium host featuring both multiple scaled structure and lithiophilic property to address obstacles at both aspects of bulk and surface simultaneously.In which,the multiple scaled structure provides void space to accommodate lithium volume change while zinc and cobalt oxides sites derived from Zeolitic Imidazolate Frameworks can react with lithium and form a stable solid electrolyte interphase,leading to a stable cycling of lithium symmetrical cell for more than 500 cycles with voltage hysteresis of only 88 mV at 2 mAcm^-2 and 5 mAh cm^-2.Moreover,full cells paired with LiFePO4 cathode can realize 500 cycles with 99.2%capacity retention,showing great potential for practical applications.The excellent electrochemical performance of the composite lithium anode proves the effectiveness of our anode design with multiple scaled structure and lithiophilic feature,which can be also expanded to other metal anodes for batteries.
基金supported by the National Natural Science Foundation of China(Grant No.51225204,91127044,U1301244 and 21121063)the National Key Project on Basic Research(Grant No.2011CB935700,2013AA050903 and 2012CB932900)the"Strategic Priority Research Program"of CAS(Grant No.XDA09010300)
文摘Lithium-sulfur(Li-S) batteries belong to one of the promising technologies for high-energy-density rechargeable batteries.However,sulfur cathodes suffer from inherent problems of its poor electronic conductivity and the shuttling of highly dissoluble lithium polysulfides generated during the cycles.Loading sulfur into porous carbons has been proved to be an effective approach to alleviate these issues.Mesoporous and microporous carbons have been widely used for sulfur accommodation,but mesoporous carbons have poor sulfur confinement,whereas microporous carbons are impeded by low sulfur loading rates.Here,a core-shell carbon,combining both the merits of mesoporous carbon with large pore volume and microporous carbon with effective sulfur confinement,was prepared by coating the mesoporous CMK-3 with a microporous carbon(MPC) shell and served as the carbon host(CMK-3 @MPC) to accommodate sulfur.After sulfur infusion,the as-obtained S/(CMK-3@MPC) cathode delivered a high initial capacity of up to 1422 mAh·g^(-1) and sustained 654 mAh·g^(-1) reversible specific capacity after 36 cycles at 0.1 C.The good performance is ascribed to the unique core-shell structure of the CMK-3@MPC matrix,in which sulfur can be effectively confined within the meso/microporous carbon host,thus achieving simultaneously high electrochemical utilization.
基金supported by the National Natural Science Foundation of China(20825310 and 20973011)National Basic Research Project of China (2011CB201400 and 2011CB808700)
文摘The effect of chloride ions on a monoclinic ZrO2-supported RuOx(RuOx/m-ZrO2) catalyst with a Ru surface density of 0.3 Ru/nm2 was studied in the selective oxidation of methanol to methyl formate(MF) at a low temperature of 373 K.The m-ZrO2 support was Cl-free,and Cl- ions were introduced into the RuOx/m-ZrO2 catalyst by impregnation with zirconium oxychloride or ammonium chloride and subsequent thermal treatment in air at 673 K.The structures of these catalysts were characterized by X-ray diffraction,Raman and X-ray photoelectron spectroscopies.Their reducibility was probed by temperature-programmed reduction in H2.The RuOx domains were present as highly dispersed RuO42- structure on m-ZrO2 with similar reducibility for the RuOx/m-ZrO2 samples irrespective of modification with or without Cl- ions.Introduction of appropriate amounts of zirconium oxychloride into RuOx/m-ZrO2 led to a remarkable increase in the methanol oxidation rate and MF selectivity,whereas introduction of ammonium chloride or zirconyl nitrate significantly inhibited the catalytic performance of RuOx/m-ZrO2.The promoting effect of Cl- ions derived from zirconium oxychloride can be tentatively attributed to their roles in facilitating the adsorption of methanol and desorption of MF product or its intermediates.This finding provides novel insights into the promoting effect of Cl ions on oxides-based catalysts for selective oxidation reactions.
基金supported by the Major State Basic Research Development Program of China (No.2006CB202605)the National Natural Science Foundation of China (No.50473055)
文摘The ZnO-modified TiO 2 electrode was prepared by adding Zn(CH 3 COO) 2 ·2H 2 O to the TiO 2 colloid during the sol-gel production process,and was used in dye-sensitized solar cells (DSCs).The open circuit voltage (V OC) and fill factor (ff) of the cells were improved significantly.The performances of the ZnO-modified TiO 2 electrode such as dark current,transient photocurrent,impedance,absorption spectra,and flat band potential (V fb) were investigated.It is found that the interface charge recombination impedance increases and V fb shifts about 200 mV toward the cathodic potential.The effect mechanism of ZnO modification on the performance of DSCs may be that ZnO occupies the surface states of the TiO 2 film.
基金V. ACKNOWLEDGMENTS This work supported by the National Natural Science Foundation of China (No.20853001). We thank Professor Qi-he Zhu and Professor Zhen Gao for valuable discussions.
基金supported by the Natural Science Foundation of China (No. 51573004, No. 51773003, No. 51711540302)the Natural Science Foundation of Beijing City (No. Z16002)the Fundamental Research Funds for the Central Universities (No. 531107051056)
文摘As the development of smart electronics, self-powered sources have been attracting increasing attention.This review summarizes research progress of photovoltaic fibers and their integrated power sources with multi-stage energy conversion. Recent development of three dimensional photovoltaic fibers is glanced with special attention to structure design and materials of typical photovoltaic types(inorganic, organic,dye/quantum dot sensitized and perovskite solar cells). The application of carbon materials in fiber energy is focused as it is a hot topic recently. The hybrid energy systems based on fiber solar cells and fiber supercapacitors, fiber batteries and fiber nanogenerators are summarized together with hybrid energy textiles. This review provides a macroscopic view of novel energy fibers and will attract research interest in flexible/wearable fiber electronics and energy textiles.
基金This work was supported by grants from the National Key Research and Development Program of China(Grant No.2017YFC0210003).
文摘Photochemical smog characterized by high concentrations of ozone(O_(3)) is a serious air pollution issue in the North China Plain(NCP)region,especially in summer and autumn.For this study,measurements of O_(3),nitrogen oxides(NO_(x)),volatile organic compounds(VOCs),carbon monoxide(CO),nitrous acid(HONO),and a number of key physical parameters were taken at a suburban site,Xianghe,in the NCP region during the summer of 2018 in order to better understand the photochemical processes leading to O_(3)formation and find an optimal way to control O_(3)pollution.Here,the radical chemistry and O_(3)photochemical budget based on measurement data from 1−23 July using a chemical box model is investigated.The daytime(0600−1800 LST)average production rate of the primary radicals referred to as RO_(x)(OH+HO2+RO2)is 3.9 ppbv h−1.HONO photolysis is the largest primary RO_(x)source(41%).Reaction of NO2+OH is the largest contributor to radical termination(41%),followed by reactions of RO2+NO2(26%).The average diurnal maximum O_(3)production and loss rates are 32.9 ppbv h−1 and 4.3 ppbv h−1,respectively.Sensitivity tests without the HONO constraint lead to decreases in daytime average primary RO_(x)production by 55%and O_(3)photochemical production by 42%,highlighting the importance of accurate HONO measurements when quantifying the RO_(x)budget and O_(3)photochemical production.Considering heterogeneous reactions of trace gases and radicals on aerosols,aerosol uptake of HO2 contributes 11%to RO_(x)sink,and the daytime average O_(3)photochemical production decreases by 14%.The O_(3)-NO_(x)-VOCs sensitivity shows that the O_(3)production at Xianghe during the investigation period is mainly controlled by VOCs.
基金financially supported by the National Natural Science Foundation of China (NSFC) (Nos. 21674007 and 21734001)the financial support from National Research Foundation (NRF) of Korea (2012M3A6A7055540 and 2015M1A2A2057506)
文摘Research on asymmetric A–D–A structured non-fullerene acceptors has lagged far behind the development of symmetric counterpart.In this contribution,by simply replacing one sulfur atom in indacenodithiophene unit with a selenium atom,an asymmetric building block Se PT and a corresponding asymmetric non-fullerene acceptor Se PT-IN have been developed.Asymmetric Se PT-IN achieved a high efficiency of 10.20% in organic solar cells when blended with PBT1-C,much higher than that of symmetric TPT-IN counterpart(8.91%).Our results demonstrated an effective heteroatom substitution strategy to develop asymmetric A–D–A structured non-fullerene acceptors.
基金Peng Wang and Xiaohuan Qi contributed equally to this study.This study was supported by the National Key Research and Development Program(Grant No.2016YFB0901600)National Natural Science Foundation of China(Grant Nos.21801247,51672295,51972326,and 21871008)the Key Research Program of Frontier Chinese Academy of Sciences(Grant No.QYZDJ-SSW-JSC013).
文摘Large surface area,high conductivity,and rich active site of carbon electrode materials are necessary characteristics for energy storage devices.However,high conductivity and high nitrogen doping of carbon electrode materials are difficult to coordinate.Here,a facile method via the carbonization of nitrogen-containing Schiff base polymer has been developed to prepare high conductivity and high nitrogen-doped hierarchical porous carbon.The organic components with a benzene ring structure in the polymer promote the formation of more sp^(2)-graphitized carbon,which is beneficial for the improvement of electrical conductivity.Nitrogen-doped hierarchical porous carbon calcined at 900℃ under the NH3 atmosphere possesses high nitrogen content of 7.48 at%,a large specific surface area of 1613.2m2/g,and high electrical conductivity of 2.7 S/cm.As electrode materials in an aqueous-based supercapacitor,nitrogen-doped hierarchical porous carbon exhibits superior specific capacitance of 385 F/g at 1 A/g as well as excellent rate performance(242 and 215 F/g at a current density of 100 and 200 A/g,respectively).In addition,the specific capacitance of electrode measured in a two-electrode system is 335 F/g at 1 A/g,and the long-term cycling stability can be achieved with more than 94%initial capacitance after 10000 cycles.The constructed symmetric supercapacitor delivers high energy density and high power density.The outstanding electrochemical performances combined with the novel and scalable synthetic approach make the nitrogen‐doped hierarchical porous carbon potential electrode material for electrochemical devices.
基金the financial support from NSFC(21325419,21504095,and 51373181)the Chinese Academy of Science(XDB12030200,KJZD-EW-J01)。
文摘The modification mechanism of the water/alcohol cathode interlayer is one of the most complicated problems in the field of organic photovoltaics,which has not been clearly elucidated yet;this greatly restricts the further enhancement of the PCE for polymer solar cells.Herein,we clarified the different effects of PFN and its derivatives,namely,poly[(9,9-bis(3’-((N,N-dimethyl)-N-ethylammonium)-propyl)-2,7-fluorene)-alt-2,7-(9,9-dioctylfluorene)](PFN-Br) in modifying fullerene-free PSCs.It is found for the first time that doping on IT-4F by the amino group of PFN leads to the unfavorable charge accumulation,and hence,forms a dense layer of electronegative molecule due to the poor electron transport capacity of the non-fullerene acceptor IT-4F.The electronegative molecular layer can block the electron transfer from the active layer to the interlayer and cause serious charge recombination at the active layer/cathode interface.This mechanism could be verified by the ESR measurement and electron-only devices.By replacing PFN with PFN-Br,the excessive doping effect between the cathode interlayer and IT-4F is eliminated,by which the charge transport and collection can be greatly improved.As a result,a high PCE of 13.5%was achieved in the fullerene-free PSCs.