Laser anti-drone technology is entering the sequence of actual combat,and it is necessary to consider the vulnerability of typical functional parts of UAVs.Since the concept of"vulnerability"was proposed,a v...Laser anti-drone technology is entering the sequence of actual combat,and it is necessary to consider the vulnerability of typical functional parts of UAVs.Since the concept of"vulnerability"was proposed,a variety of analysis programs for battlefield targets to traditional weapons have been developed,but a comprehensive assessment methodology for targets'vulnerability to laser is still missing.Based on the shotline method,this paper proposes a method that equates laser beam to shotline array,an efficient vulnerability analysis program of target to laser is established by this method,and the program includes the circuit board and the wire into the vulnerability analysis category,which improves the precision of the vulnerability analysis.Taking the UAV engine part as the target of vulnerability analysis,combine with the"life-death unit method"to calculate the laser penetration rate of various materials of the UAV,and the influence of laser weapon system parameters and striking orientation on the killing probability is quantified after introducing the penetration rate into the vulnerability analysis program.The quantitative analysis method proposed in this paper has certain general expansibility,which can provide a fresh idea for the vulnerability analysis of other targets to laser.展开更多
The scattered stray light of a coronagraph is a type of stray light that is generated by the objective lens as its surface defects are irradiated by sunlight.The defects mainly include dust and blemishes on the lens s...The scattered stray light of a coronagraph is a type of stray light that is generated by the objective lens as its surface defects are irradiated by sunlight.The defects mainly include dust and blemishes on the lens surface,microroughness of the lens surface,and impurity and inhomogeneity of the glass.Unlike the other types of relatively stable defects introduced when the objective lens is being manufactured,the scattered stray light caused by dusts on the lens surface is difficult to quantify accurately due to the disorder and randomness of the dust accumulation.The contribution of this type of stray light to the overall stray light level is difficult to determine through simulations and experiments.This can result in continuous deterioration of the stray light level of a coronagraph and thus affect the observation capabilities of the instrument.To solve this issue,through analyzing the forming mechanism of scattered stray light and ghost image generated by the inner-occulted coronagraph,we propose a novel method to monitor the scattered stray light from dusts by utilizing different stray light correlation coefficients.In this method,we first simulate and measure the level of stray light from the ghost image of the objective lens,and then determine the flux ratio of scattered light and ghost image on the conjugate plane.Although the flux ratio varies with the accumulation of dusts on the lens surface,it remains constant on the image plane.Therefore,the level of dust scattering light on the image plane can be obtained by using this ratio together with the level of ghost image stray light.The accuracy of this method has been validated in a laboratory by applying the objective lens with numerous surface cleanliness levels.展开更多
The thermal gradient is an important factor that causes degradation to the image quality of telescopes. In order to ensure the accurate alignment of the primary focus unit and the primary mirror, the hexapod platform(...The thermal gradient is an important factor that causes degradation to the image quality of telescopes. In order to ensure the accurate alignment of the primary focus unit and the primary mirror, the hexapod platform(as a corrector) is investigated in this paper. First, a ground-based telescope with 2.5 m aperture and 3.5 deg field of view is described. The telescope is under construction, and it is expected to be finished in 2023. Second, the hexapod platform with flexure hinges utilized to adjust the primary focus unit is proposed, which is applied as a corrector.Then, the inverse kinematics of the platform is established and an open-loop control system is built based on it.Finally, the cryogenic performance test for the hexapod platform is performed. The experimental results show that the resolution and repeatability of the translation for the hexapod platform can be achieved at the micrometer level.The resolution and repeatability of the rotation can be achieved at the arc-second level. Therefore, the cryogenic performance of the hexapod platform can meet the optical imaging requirements of the wide-field ground-based telescope. The kinematic analysis and cryogenic performance tests in the paper provide a technical reference for the precise alignment of the primary focus unit and the primary mirror, which can improve the imaging quality of the telescope.展开更多
Multi-conjugation adaptive optics(MCAOs) have been investigated and used in the large aperture optical telescopes for high-resolution imaging with large field of view(FOV).The atmospheric tomographic phase reconstruct...Multi-conjugation adaptive optics(MCAOs) have been investigated and used in the large aperture optical telescopes for high-resolution imaging with large field of view(FOV).The atmospheric tomographic phase reconstruction and projection of three-dimensional turbulence volume onto wavefront correctors,such as deformable mirrors(DMs) or liquid crystal wavefront correctors(LCWCs),is a very important step in the data processing of an MCAO's controller.In this paper,a method according to the wavefront reconstruction performance of MCAO is presented to evaluate the optimized configuration of multi laser guide stars(LGSs) and the reasonable conjugation heights of LCWCs.Analytical formulations are derived for the different configurations and are used to generate optimized parameters for MCAO.Several examples are given to demonstrate our LGSs configuration optimization method.Compared with traditional methods,our method has minimum wavefront tomographic error,which will be helpful to get higher imaging resolution at large FOV in MCAO.展开更多
The thermal and chemical stabilities of Mo/Si multilayer structure used in Bragg-Fresnel optics were studied to get optimal technological parameters of pattern generation.Mo/Si multilayers were annealed at temperature...The thermal and chemical stabilities of Mo/Si multilayer structure used in Bragg-Fresnel optics were studied to get optimal technological parameters of pattern generation.Mo/Si multilayers were annealed at temperature ranging from 360 to 770 K,treated with acetone and 5‰NaOH solution,and characterized by small-angle x-ray diffraction technique as well as x-ray photoelectron spectroscopy and Olympus microscopy.展开更多
We study systematically the negative magnetoresistance(MR)effect in WTe_(2±α)flakes with different thicknesses and doping concentrations.The negative MR is sensitive to the relative orientation between electrica...We study systematically the negative magnetoresistance(MR)effect in WTe_(2±α)flakes with different thicknesses and doping concentrations.The negative MR is sensitive to the relative orientation between electrical-/magnetic-field and crystallographic orientation of WTe_(2±α).The analysis proves that the negative MR originates from chiral anomaly and is anisotropic.Maximum entropy mobility spectrum is used to analyze the electron and hole concentrations in the flake samples.It is found that the negative MR observed in WTe_(2±α)flakes with low doping concentration is small,and the high doping concentration is large.The doping-induced disorder obviously inhibits the positive MR,so the negative MR can be more easily observed.In a word,we introduce disorder to suppress positive MR by doping,and successfully obtain the negative MR in WTe_(2±α)flakes with different thicknesses and doping concentrations,which indicates that the chiral anomaly effect in WTe_(2)is robust.展开更多
Four novel chiral honeycomb structures inspired by the biological arrangement shape are designed.The functional principle is raised to solve the large deformation of bio-inspired structures and the structural constitu...Four novel chiral honeycomb structures inspired by the biological arrangement shape are designed.The functional principle is raised to solve the large deformation of bio-inspired structures and the structural constitutive model is proposed to explain the quasi-static mechanical properties of chiral honeycomb array structures and honeycomb structures.Simulation and experiment results verify the accuracy of theoretical analysis results and the errors are all within 15%.In structural mechanical properties,Equidimensional Chiral Honeycomb Array Structure(ECHS)has excellent mechanical properties.Among ECHS,Small-sized Column Chiral Honeycomb Array Structure(SCHCS)has the best properties.The bearing capacity,specific energy absorption,and specific strength of SCHCS are more than twice as much as the others in this paper.The chiral honeycomb array structure has the best mechanical properties at a certain size.In the structural design,the optimal size model should be obtained first in combination with the optimization algorithm for the protection design.展开更多
Weak gravitational lensing is a powerful tool in modern cosmology.To accurately measure the weak lensing signal,one has to control the systematic bias on a small level.One of the most difficult problems is how to corr...Weak gravitational lensing is a powerful tool in modern cosmology.To accurately measure the weak lensing signal,one has to control the systematic bias on a small level.One of the most difficult problems is how to correct the smearing effect of the Point-Spread Function(PSF)on the shape of the galaxies.The chromaticity of PSF for a broad-band observation can lead to new subtle effects.Since the PSF is wavelength-dependent and the spectrum energy distributions between stars and galaxies are different,the effective PSF measured from the star images will be different from those that smear the galaxies.Such a bias is called color bias.We estimate it in the optical bands of the Chinese Space Station Survey Telescope from simulated PSFs,and show the dependence on the color and redshift of the galaxies.Moreover,due to the spatial variation of spectra over the galaxy image,another higher-order bias exists:color gradient bias.Our results show that both color bias and color gradient bias are generally below 0.1%in CSST.Only for small-size galaxies,one needs to be careful about the color gradient bias in the weak lensing analysis using CSST data.展开更多
Efficient and eco-friendly disinfection of air-borne human respiratory RNA viruses is pursued in both public environment and portable usage.The AlGaN-based deep ultraviolet(DUV)light-emission diode(LED)has high practi...Efficient and eco-friendly disinfection of air-borne human respiratory RNA viruses is pursued in both public environment and portable usage.The AlGaN-based deep ultraviolet(DUV)light-emission diode(LED)has high practical potentials because of its advantages of variable wavelength,rapid sterilization,environmental protection,and miniaturization.Therefore,whether the emission wavelength has effects on the disinfection as well as whether the device is feasible to sterilize various respiratory RNA viruses under portable conditions is crucial.Here,we fabricate AlGaN-based DUV LEDs with different wavelength on high-temperature-annealed(HTA)AlN/Sapphire templates and investigate the inactivation effects for several respiratory RNA viruses.The AlN/AlGaN superlattices are employed between the template and upper n-AlGaN to release the strong compressive stress(SCS),improving the crystal quality and interface roughness.DUV LEDs with the wavelength of 256,265,and 278 nm,corresponding to the light output power of 6.8,9.6,and 12.5 mW,are realized,among which the 256 nm-LED shows the most potent inactivation effect in human respiratory RNA viruses,including SARS-CoV-2,influenza A virus(IAV),and human parainfluenza virus(HPIV),at a similar light power density(LPD)of~0.8 mW/cm2 for 10 s.These results will contribute to the advanced DUV LED application of disinfecting viruses with high potency and broad spectrum in a portable and eco-friendly use.展开更多
A composite structure with frame and skin based on cabin structure in a large space telescope is studied in this paper.The frame is composed of longitudinal and transverse beams with hybrid bonded/bolted joints,and th...A composite structure with frame and skin based on cabin structure in a large space telescope is studied in this paper.The frame is composed of longitudinal and transverse beams with hybrid bonded/bolted joints,and the skin is connected to the frame by bolts.Tensile tests are conducted on the structure by a set of test stand.It is observed that residual deformation occurs in the first test of the structure,which is attributed to the relative sliding between the skin and frame because of bolt-hole clearances.The high tightening torque and the increased number of the skin-frame bolts contribute to the high stiffness of the structure.A finite element model(FEM)of this composite structure is established,and the simulation model is verified by the experimental results.The FEM is contrastively analyzed with different frame joints,and it is found that adhesive joining in the hybrid bonded/bolted joints enhances the stiffness of the structure significantly.Given that adhesive plays a leading role in the stiffness of the hybrid joints,Tie contact in FEM is proposed to simulate bonded or hybrid joints when studying the stiffness performance of undamaged structure.展开更多
1 Introduction Since the early of 1980’s,the studies of soft X-ray and EUV optics have been implemented in CIOMP (Changchun Institute of Optics,Fine Mechanics and Physics).So far,the research system of soft X-ray an...1 Introduction Since the early of 1980’s,the studies of soft X-ray and EUV optics have been implemented in CIOMP (Changchun Institute of Optics,Fine Mechanics and Physics).So far,the research system of soft X-ray and EUV optics has been founded including sources,ra- diometry,testing and manufacturing of the super smooth mirror and multilayer coating mirror fabrication.Based on the above technologies,we started to develop the soft X-ray and EUV optical system such as a space EUV solar telescope and a EUV imager.展开更多
Single-point diamond turning (SPDT) is widely used in the machining of infrared materials and metal-based mirrors. Diamond tips can scratch material, replicate the shape of the tip, and create annular turning marks on...Single-point diamond turning (SPDT) is widely used in the machining of infrared materials and metal-based mirrors. Diamond tips can scratch material, replicate the shape of the tip, and create annular turning marks on optical surfaces, which can have unpredictable adverse effects on imaging. In order to predict the effect of turning marks diffraction on the degradation of imaging quality, a model of the influence of SPDT processing parameters on the reduction of system imaging MTF under the influence of ideal grating turning marks diffraction was established. The results show that the depth of the turning mark will lead to the decline of MTF, especially the low frequency information. Finally, a method is proposed to reduce the effect of turning marks diffraction through changing the processing parameters. .展开更多
Meta-lens are a new type of planar optical element that can flexibly manipulate the phase, polarization and amplitude of the beam, and are currently receiving a great deal of attention as they are easier to process an...Meta-lens are a new type of planar optical element that can flexibly manipulate the phase, polarization and amplitude of the beam, and are currently receiving a great deal of attention as they are easier to process and manufacture. Off-axis meta-lens are a special type of meta-lens with a certain degree of dispersion that can be used as a beam-splitting element, providing a unique and feasible way to realize micro-miniature instruments. We analyze the effects of different numerical apertures and off-axis angles on the spectral resolution, focusing efficiency and simulation results of off-axis meta-lens to provide ideas for subsequent research and application of off-axis meta-lens. A number of off-axis meta-lens with parameters NA = 0.408 α = 13°, NA = 0.18 α = 13°<sup></sup> and NA = 0.408 α = 20° were simulated through Lumerical software. The results show that the off-axis angle is related to the resolution;the larger the angle, the better the spectral resolution but the lower the focusing efficiency;when the numerical aperture is smaller, the smaller the coverage of the phase distribution, which will lead to a larger deviation between simulation and theory. The designer needs to balance the numerical aperture, off-axis angle and other parameters reasonably according to the requirements in order to achieve the desired effect. The findings of this study have important reference values for the theoretical analysis of off-axis meta-lens and the design of parameters in practical applications. .展开更多
Ferroelectric materials are promising candidates for ultraviolet photodetectors due to their ferroelectric effect.In this work,a BaTiO_(3)/p-GaN/Au hybrid heterojunction-Schottky self-driven ultraviolet photodetector ...Ferroelectric materials are promising candidates for ultraviolet photodetectors due to their ferroelectric effect.In this work,a BaTiO_(3)/p-GaN/Au hybrid heterojunction-Schottky self-driven ultraviolet photodetector was fabricated with excellent bipolar photoresponse property.At 0 V bias,the direction of the photocurrent can be switched by flipping the depolarization field of BaTiO_(3),which allows the performance of photodetectors to be controlled by the ferroelectric effect.Meanwhile,a relatively large responsivity and a fast response speed can be also observed.In particular,when the depolarization field of BaTiO_(3) is in the same direction of the built-in electric field of the Au/p-GaN Schottky junction(up polarized state),the photodetector exhibits a high responsivity of 18 mA/W at 360 nm,and a fast response speed of<40 ms at 0 V.These findings pave a new way for the preparation of high-performance photodetectors with bipolar photocurrents.展开更多
240 nm AlGaN-based micro-LEDs with different sizes are designed and fabricated.Then,the external quantum efficiency(EQE)and light extraction efficiency(LEE)are systematically investigated by comparing size and edge ef...240 nm AlGaN-based micro-LEDs with different sizes are designed and fabricated.Then,the external quantum efficiency(EQE)and light extraction efficiency(LEE)are systematically investigated by comparing size and edge effects.Here,it is revealed that the peak optical output power increases by 81.83%with the size shrinking from 50.0 to 25.0μm.Thereinto,the LEE increases by 26.21%and the LEE enhancement mainly comes from the sidewall light extraction.Most notably,transversemagnetic(TM)mode light intensifies faster as the size shrinks due to the tilted mesa side-wall and Al reflector design.However,when it turns to 12.5μm sized micro-LEDs,the output power is lower than 25.0μm sized ones.The underlying mechanism is that even though protected by SiO2 passivation,the edge effect which leads to current leakage and Shockley-Read-Hall(SRH)recombination deteriorates rapidly with the size further shrinking.Moreover,the ratio of the p-contact area to mesa area is much lower,which deteriorates the p-type current spreading at the mesa edge.These findings show a role of thumb for the design of high efficiency micro-LEDs with wavelength below 250 nm,which will pave the way for wide applications of deep ultraviolet(DUV)micro-LEDs.展开更多
Prof.Eric Mazur is a great influencer over and beyond the optics community.As a physicist,he is a pioneer of ultrafast optics and was one of the inventors of colliding-pulse mode-locked laser.As an educator,he not onl...Prof.Eric Mazur is a great influencer over and beyond the optics community.As a physicist,he is a pioneer of ultrafast optics and was one of the inventors of colliding-pulse mode-locked laser.As an educator,he not only gave talks to thousands,but also revolutionized teaching with his globally renowned methodology“Peer Instruction”.As a leader and entrepreneur,he co-founded several companies and was President of Optica(formerly the Optical Society)and currently is the Chair of the Optica Foundation.Here,Light:Science&Applications talked with Prof.Eric Mazur about his opinions on research,education and industry.The full interview video can be found in the Supplementary File.展开更多
CeO 2 nanocrystalline particulates with different sizes were prepared by precipitation method using ethanol as dispersive and protective reagent. XRD spectra show that the synthesized CeO 2 has cubic crystalline struc...CeO 2 nanocrystalline particulates with different sizes were prepared by precipitation method using ethanol as dispersive and protective reagent. XRD spectra show that the synthesized CeO 2 has cubic crystalline structure of space group O 5 H-F M3M, when calcination temperature is in the range of 250~800 ℃. TEM images reveal that CeO 2 particles are spherical in shape. The average size of the particles increases with the increase of calcination temperature. Thermogravimetric analysis indicates that the weight loss of precursor mainly depends on the calcination temperature, and little depends on the calcination time. Measurements of CeO 2 relative density show that the relative density of CeO 2 nanocrystalline powders increases with increasing CeO 2 particle size.展开更多
Based on the experimental results, in which the fabricated error of the double layer frequency selective surface (FSS) leads to the transmission loss and the resonant frequency leaves away the design resonant frequenc...Based on the experimental results, in which the fabricated error of the double layer frequency selective surface (FSS) leads to the transmission loss and the resonant frequency leaves away the design resonant frequency, the inter-layer separation distance (ISD) and the unit cell aligning error (UAE) were used as main variables to study the transmission performance attenuation of the double layer FSS configuration. The numerical analysis model for ISD and UAE was established and also was used to simulate the ring unit cell FSS transmission performance by the finite element and periodic moment methods. The double layer ring aperture FSS configuration designed was used as the numerical model. As a result of the numerical analysis, it is shown that both ISD and UAE produce insertion transmission loss (ITL) and insertion phase distortion (IPD) directly. Furthermore, ISD results in more loss of the amplitude of the transmitted signal for the FSS than UAE. It is significant for the designer of the multiplayer FSS to assign the fabricated error of the FSS dielectric layers. The UAE introduces the insertion phase variation badly.展开更多
For the technology of diamond cutting of optical glass, the high tool wear rate is a main reason for hindering the practical application of this technology. Many researches on diamond tool wear in glass cutting rest o...For the technology of diamond cutting of optical glass, the high tool wear rate is a main reason for hindering the practical application of this technology. Many researches on diamond tool wear in glass cutting rest on wear phenomenon describing simply without analyzing the genesis of wear phenomenon and interpreting the formation process of tool wear in mechanics. For in depth understanding of the tool wear and its effect on surface roughness in diamond cutting of glass, experiments of diamond turning with cutting distance increasing gradually are carried out on soda-lime glass. The wear morphology of rake face and flank face, the corresponding surface features of workpiece and the surface roughness, and the material compositions of flank wear area are detected. Experimental results indicate that the flank wear is predominant in diamond cutting glass and the flank wear land is characterized by micro-grooves, some smooth crater on the rake face is also seen. The surface roughness begins to increase rapidly, when the cutting mode changes from ductile to brittle for the aggravation of tool wear with the cutting distance over 150 m. The main mechanisms of inducing tool wear in diamond cutting of glass are diffusion, mechanical friction, thermo-chemical action and abrasive wear. The proposed research makes analysis and research from wear mechanism on the tool wear and its effect on surface roughness in diamond cutting of glass, and provides theoretical basis for minimizing the tool wear in diamond cutting brittle materials, such as optical glass.展开更多
In this paper, a wild boar head was taken as the bionic research object for the development of new ridgers, a kind of plough. The reverse engineering technology was adopted to obtain the surface geometrical informatio...In this paper, a wild boar head was taken as the bionic research object for the development of new ridgers, a kind of plough. The reverse engineering technology was adopted to obtain the surface geometrical information of the head. Several three-dimensional (3D) point clouds of the head were captured first using a non-touch laser scanner, and an integrated point cloud was generated by aligning these point clouds using UG/Imageware. Then, the digital surface model of the head was rebuilt by means of CATIA. The characteristic curves of the surface model were analyzed. The results show that the average error between the rebuilt surface and the point cloud is ?0.431 mm. The max curvature of the ridge on the neb of the head is 0.187 mm?1, and the max and min Gauss curvatures on the surface are 0.008 mm?2 and ?0.002 mm?2. These geometrical information are the essential parameters for biomimetics study of the ridger.展开更多
基金National Natural Science Foundation of China(Grant Nos.62005276,62175234)the Scientific and Technological Development Program of Jilin,China(Grant No.20230508111RC)to provide fund for this research。
文摘Laser anti-drone technology is entering the sequence of actual combat,and it is necessary to consider the vulnerability of typical functional parts of UAVs.Since the concept of"vulnerability"was proposed,a variety of analysis programs for battlefield targets to traditional weapons have been developed,but a comprehensive assessment methodology for targets'vulnerability to laser is still missing.Based on the shotline method,this paper proposes a method that equates laser beam to shotline array,an efficient vulnerability analysis program of target to laser is established by this method,and the program includes the circuit board and the wire into the vulnerability analysis category,which improves the precision of the vulnerability analysis.Taking the UAV engine part as the target of vulnerability analysis,combine with the"life-death unit method"to calculate the laser penetration rate of various materials of the UAV,and the influence of laser weapon system parameters and striking orientation on the killing probability is quantified after introducing the penetration rate into the vulnerability analysis program.The quantitative analysis method proposed in this paper has certain general expansibility,which can provide a fresh idea for the vulnerability analysis of other targets to laser.
基金supported by the National Key R&D Program of China No.2021YFA0718600the National Natural Science Foundation of China(grant Nos.41904168,42274227 and U1931122)the Chinese Meridian Project。
文摘The scattered stray light of a coronagraph is a type of stray light that is generated by the objective lens as its surface defects are irradiated by sunlight.The defects mainly include dust and blemishes on the lens surface,microroughness of the lens surface,and impurity and inhomogeneity of the glass.Unlike the other types of relatively stable defects introduced when the objective lens is being manufactured,the scattered stray light caused by dusts on the lens surface is difficult to quantify accurately due to the disorder and randomness of the dust accumulation.The contribution of this type of stray light to the overall stray light level is difficult to determine through simulations and experiments.This can result in continuous deterioration of the stray light level of a coronagraph and thus affect the observation capabilities of the instrument.To solve this issue,through analyzing the forming mechanism of scattered stray light and ghost image generated by the inner-occulted coronagraph,we propose a novel method to monitor the scattered stray light from dusts by utilizing different stray light correlation coefficients.In this method,we first simulate and measure the level of stray light from the ghost image of the objective lens,and then determine the flux ratio of scattered light and ghost image on the conjugate plane.Although the flux ratio varies with the accumulation of dusts on the lens surface,it remains constant on the image plane.Therefore,the level of dust scattering light on the image plane can be obtained by using this ratio together with the level of ghost image stray light.The accuracy of this method has been validated in a laboratory by applying the objective lens with numerous surface cleanliness levels.
基金supported by the Jilin Scientific and Technological Development Program (No.20220204116YY)the National Natural Science Foundation of China(No.62235018 and No.12133009)。
文摘The thermal gradient is an important factor that causes degradation to the image quality of telescopes. In order to ensure the accurate alignment of the primary focus unit and the primary mirror, the hexapod platform(as a corrector) is investigated in this paper. First, a ground-based telescope with 2.5 m aperture and 3.5 deg field of view is described. The telescope is under construction, and it is expected to be finished in 2023. Second, the hexapod platform with flexure hinges utilized to adjust the primary focus unit is proposed, which is applied as a corrector.Then, the inverse kinematics of the platform is established and an open-loop control system is built based on it.Finally, the cryogenic performance test for the hexapod platform is performed. The experimental results show that the resolution and repeatability of the translation for the hexapod platform can be achieved at the micrometer level.The resolution and repeatability of the rotation can be achieved at the arc-second level. Therefore, the cryogenic performance of the hexapod platform can meet the optical imaging requirements of the wide-field ground-based telescope. The kinematic analysis and cryogenic performance tests in the paper provide a technical reference for the precise alignment of the primary focus unit and the primary mirror, which can improve the imaging quality of the telescope.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11174274,11174279,61205021,11204299,61475152,and 61405194)the State Key Laboratory of Applied Optics,Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences
文摘Multi-conjugation adaptive optics(MCAOs) have been investigated and used in the large aperture optical telescopes for high-resolution imaging with large field of view(FOV).The atmospheric tomographic phase reconstruction and projection of three-dimensional turbulence volume onto wavefront correctors,such as deformable mirrors(DMs) or liquid crystal wavefront correctors(LCWCs),is a very important step in the data processing of an MCAO's controller.In this paper,a method according to the wavefront reconstruction performance of MCAO is presented to evaluate the optimized configuration of multi laser guide stars(LGSs) and the reasonable conjugation heights of LCWCs.Analytical formulations are derived for the different configurations and are used to generate optimized parameters for MCAO.Several examples are given to demonstrate our LGSs configuration optimization method.Compared with traditional methods,our method has minimum wavefront tomographic error,which will be helpful to get higher imaging resolution at large FOV in MCAO.
基金Supported by the National Natural Science Foundation of China under Grant No.69578023。
文摘The thermal and chemical stabilities of Mo/Si multilayer structure used in Bragg-Fresnel optics were studied to get optimal technological parameters of pattern generation.Mo/Si multilayers were annealed at temperature ranging from 360 to 770 K,treated with acetone and 5‰NaOH solution,and characterized by small-angle x-ray diffraction technique as well as x-ray photoelectron spectroscopy and Olympus microscopy.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.92065110,11674031,11974048,12074334)the National Basic Research Program of China(Grant Nos.2014CB920903 and 2013CB921701)。
文摘We study systematically the negative magnetoresistance(MR)effect in WTe_(2±α)flakes with different thicknesses and doping concentrations.The negative MR is sensitive to the relative orientation between electrical-/magnetic-field and crystallographic orientation of WTe_(2±α).The analysis proves that the negative MR originates from chiral anomaly and is anisotropic.Maximum entropy mobility spectrum is used to analyze the electron and hole concentrations in the flake samples.It is found that the negative MR observed in WTe_(2±α)flakes with low doping concentration is small,and the high doping concentration is large.The doping-induced disorder obviously inhibits the positive MR,so the negative MR can be more easily observed.In a word,we introduce disorder to suppress positive MR by doping,and successfully obtain the negative MR in WTe_(2±α)flakes with different thicknesses and doping concentrations,which indicates that the chiral anomaly effect in WTe_(2)is robust.
基金This work is supported by National Key R&D program of of China(No.2022YFB4600500)the National Natural Science Foundation of China(No.51975246)+2 种基金the Science and Technology Development Program of Jilin Province,China(No.20220101192JC)Capital construction fund plan within the budget of Jilin Province(No.2023C041-4)Chongqing Natural Science Foundation(No.CSSTB2022NSCQ-MSX0225).
文摘Four novel chiral honeycomb structures inspired by the biological arrangement shape are designed.The functional principle is raised to solve the large deformation of bio-inspired structures and the structural constitutive model is proposed to explain the quasi-static mechanical properties of chiral honeycomb array structures and honeycomb structures.Simulation and experiment results verify the accuracy of theoretical analysis results and the errors are all within 15%.In structural mechanical properties,Equidimensional Chiral Honeycomb Array Structure(ECHS)has excellent mechanical properties.Among ECHS,Small-sized Column Chiral Honeycomb Array Structure(SCHCS)has the best properties.The bearing capacity,specific energy absorption,and specific strength of SCHCS are more than twice as much as the others in this paper.The chiral honeycomb array structure has the best mechanical properties at a certain size.In the structural design,the optimal size model should be obtained first in combination with the optimization algorithm for the protection design.
基金funded by the National Natural Science Foundation of China(NSFC)under Nos.11873006,11933002,11903082,and U1931210the science research grants from the China Manned Space Project with Nos.CMS-CSST-2021-A01,CMS-CSST-2021A12,and CMS-CSST-2021-A07。
文摘Weak gravitational lensing is a powerful tool in modern cosmology.To accurately measure the weak lensing signal,one has to control the systematic bias on a small level.One of the most difficult problems is how to correct the smearing effect of the Point-Spread Function(PSF)on the shape of the galaxies.The chromaticity of PSF for a broad-band observation can lead to new subtle effects.Since the PSF is wavelength-dependent and the spectrum energy distributions between stars and galaxies are different,the effective PSF measured from the star images will be different from those that smear the galaxies.Such a bias is called color bias.We estimate it in the optical bands of the Chinese Space Station Survey Telescope from simulated PSFs,and show the dependence on the color and redshift of the galaxies.Moreover,due to the spatial variation of spectra over the galaxy image,another higher-order bias exists:color gradient bias.Our results show that both color bias and color gradient bias are generally below 0.1%in CSST.Only for small-size galaxies,one needs to be careful about the color gradient bias in the weak lensing analysis using CSST data.
基金supports from the National Key R&D Program of China(2022YFB3605001)National Natural Science Foundation of China(62121005,62004196,61725403,31922004,and 61827813)+2 种基金Youth Innovation Promotion Association of Chinese Academy of Sciences(2023223)Young Elite Scientist Sponsorship Program by CAST(YESS20200182)Innovation Team Project from the Hubei Province(2020CFA015).
文摘Efficient and eco-friendly disinfection of air-borne human respiratory RNA viruses is pursued in both public environment and portable usage.The AlGaN-based deep ultraviolet(DUV)light-emission diode(LED)has high practical potentials because of its advantages of variable wavelength,rapid sterilization,environmental protection,and miniaturization.Therefore,whether the emission wavelength has effects on the disinfection as well as whether the device is feasible to sterilize various respiratory RNA viruses under portable conditions is crucial.Here,we fabricate AlGaN-based DUV LEDs with different wavelength on high-temperature-annealed(HTA)AlN/Sapphire templates and investigate the inactivation effects for several respiratory RNA viruses.The AlN/AlGaN superlattices are employed between the template and upper n-AlGaN to release the strong compressive stress(SCS),improving the crystal quality and interface roughness.DUV LEDs with the wavelength of 256,265,and 278 nm,corresponding to the light output power of 6.8,9.6,and 12.5 mW,are realized,among which the 256 nm-LED shows the most potent inactivation effect in human respiratory RNA viruses,including SARS-CoV-2,influenza A virus(IAV),and human parainfluenza virus(HPIV),at a similar light power density(LPD)of~0.8 mW/cm2 for 10 s.These results will contribute to the advanced DUV LED application of disinfecting viruses with high potency and broad spectrum in a portable and eco-friendly use.
基金Supported by the National Natural Science Foundation of China(No.51805510)Science and Technology Development Plan Project of Jilin Province(No.20200201294JC)。
文摘A composite structure with frame and skin based on cabin structure in a large space telescope is studied in this paper.The frame is composed of longitudinal and transverse beams with hybrid bonded/bolted joints,and the skin is connected to the frame by bolts.Tensile tests are conducted on the structure by a set of test stand.It is observed that residual deformation occurs in the first test of the structure,which is attributed to the relative sliding between the skin and frame because of bolt-hole clearances.The high tightening torque and the increased number of the skin-frame bolts contribute to the high stiffness of the structure.A finite element model(FEM)of this composite structure is established,and the simulation model is verified by the experimental results.The FEM is contrastively analyzed with different frame joints,and it is found that adhesive joining in the hybrid bonded/bolted joints enhances the stiffness of the structure significantly.Given that adhesive plays a leading role in the stiffness of the hybrid joints,Tie contact in FEM is proposed to simulate bonded or hybrid joints when studying the stiffness performance of undamaged structure.
文摘1 Introduction Since the early of 1980’s,the studies of soft X-ray and EUV optics have been implemented in CIOMP (Changchun Institute of Optics,Fine Mechanics and Physics).So far,the research system of soft X-ray and EUV optics has been founded including sources,ra- diometry,testing and manufacturing of the super smooth mirror and multilayer coating mirror fabrication.Based on the above technologies,we started to develop the soft X-ray and EUV optical system such as a space EUV solar telescope and a EUV imager.
文摘Single-point diamond turning (SPDT) is widely used in the machining of infrared materials and metal-based mirrors. Diamond tips can scratch material, replicate the shape of the tip, and create annular turning marks on optical surfaces, which can have unpredictable adverse effects on imaging. In order to predict the effect of turning marks diffraction on the degradation of imaging quality, a model of the influence of SPDT processing parameters on the reduction of system imaging MTF under the influence of ideal grating turning marks diffraction was established. The results show that the depth of the turning mark will lead to the decline of MTF, especially the low frequency information. Finally, a method is proposed to reduce the effect of turning marks diffraction through changing the processing parameters. .
文摘Meta-lens are a new type of planar optical element that can flexibly manipulate the phase, polarization and amplitude of the beam, and are currently receiving a great deal of attention as they are easier to process and manufacture. Off-axis meta-lens are a special type of meta-lens with a certain degree of dispersion that can be used as a beam-splitting element, providing a unique and feasible way to realize micro-miniature instruments. We analyze the effects of different numerical apertures and off-axis angles on the spectral resolution, focusing efficiency and simulation results of off-axis meta-lens to provide ideas for subsequent research and application of off-axis meta-lens. A number of off-axis meta-lens with parameters NA = 0.408 α = 13°, NA = 0.18 α = 13°<sup></sup> and NA = 0.408 α = 20° were simulated through Lumerical software. The results show that the off-axis angle is related to the resolution;the larger the angle, the better the spectral resolution but the lower the focusing efficiency;when the numerical aperture is smaller, the smaller the coverage of the phase distribution, which will lead to a larger deviation between simulation and theory. The designer needs to balance the numerical aperture, off-axis angle and other parameters reasonably according to the requirements in order to achieve the desired effect. The findings of this study have important reference values for the theoretical analysis of off-axis meta-lens and the design of parameters in practical applications. .
基金Project supported by the National Natural Science Foundation of China (Grant Nos.62074148,61875194,11727902,12204474,12304111,and 12304112)the Youth Innovation Promotion Association,Chinese Academy of Sciences (Grant No.2020225)+1 种基金Jilin Province Science Fund (Grant Nos.20220101053JC and 20210101145JC)Jilin Province Young and Middle-Aged Science and Technology Innovation Leaders and Team Project (Grant No.20220508153RC)。
文摘Ferroelectric materials are promising candidates for ultraviolet photodetectors due to their ferroelectric effect.In this work,a BaTiO_(3)/p-GaN/Au hybrid heterojunction-Schottky self-driven ultraviolet photodetector was fabricated with excellent bipolar photoresponse property.At 0 V bias,the direction of the photocurrent can be switched by flipping the depolarization field of BaTiO_(3),which allows the performance of photodetectors to be controlled by the ferroelectric effect.Meanwhile,a relatively large responsivity and a fast response speed can be also observed.In particular,when the depolarization field of BaTiO_(3) is in the same direction of the built-in electric field of the Au/p-GaN Schottky junction(up polarized state),the photodetector exhibits a high responsivity of 18 mA/W at 360 nm,and a fast response speed of<40 ms at 0 V.These findings pave a new way for the preparation of high-performance photodetectors with bipolar photocurrents.
基金This work was supported by National Key R&D Program of China(2022YFB3605103)the National Natural Science Foundation of China(62204241,U22A2084,62121005,and 61827813)+3 种基金the Natural Science Foundation of Jilin Province(20230101345JC,20230101360JC,and 20230101107JC)the Youth Innovation Promotion Association of CAS(2023223)the Young Elite Scientist Sponsorship Program By CAST(YESS20200182)the CAS Talents Program(E30122E4M0).
文摘240 nm AlGaN-based micro-LEDs with different sizes are designed and fabricated.Then,the external quantum efficiency(EQE)and light extraction efficiency(LEE)are systematically investigated by comparing size and edge effects.Here,it is revealed that the peak optical output power increases by 81.83%with the size shrinking from 50.0 to 25.0μm.Thereinto,the LEE increases by 26.21%and the LEE enhancement mainly comes from the sidewall light extraction.Most notably,transversemagnetic(TM)mode light intensifies faster as the size shrinks due to the tilted mesa side-wall and Al reflector design.However,when it turns to 12.5μm sized micro-LEDs,the output power is lower than 25.0μm sized ones.The underlying mechanism is that even though protected by SiO2 passivation,the edge effect which leads to current leakage and Shockley-Read-Hall(SRH)recombination deteriorates rapidly with the size further shrinking.Moreover,the ratio of the p-contact area to mesa area is much lower,which deteriorates the p-type current spreading at the mesa edge.These findings show a role of thumb for the design of high efficiency micro-LEDs with wavelength below 250 nm,which will pave the way for wide applications of deep ultraviolet(DUV)micro-LEDs.
基金the support from CAS Youth Innovation Promotion Association Project[No.20211214]CAST Outstanding Move-Young Talented Editors Project[No.2023ZZ052213]High Profile Journal Grant of the Society of Scientific and Technological Periodicals of Chinese Academy of Sciences.
文摘Prof.Eric Mazur is a great influencer over and beyond the optics community.As a physicist,he is a pioneer of ultrafast optics and was one of the inventors of colliding-pulse mode-locked laser.As an educator,he not only gave talks to thousands,but also revolutionized teaching with his globally renowned methodology“Peer Instruction”.As a leader and entrepreneur,he co-founded several companies and was President of Optica(formerly the Optical Society)and currently is the Chair of the Optica Foundation.Here,Light:Science&Applications talked with Prof.Eric Mazur about his opinions on research,education and industry.The full interview video can be found in the Supplementary File.
文摘CeO 2 nanocrystalline particulates with different sizes were prepared by precipitation method using ethanol as dispersive and protective reagent. XRD spectra show that the synthesized CeO 2 has cubic crystalline structure of space group O 5 H-F M3M, when calcination temperature is in the range of 250~800 ℃. TEM images reveal that CeO 2 particles are spherical in shape. The average size of the particles increases with the increase of calcination temperature. Thermogravimetric analysis indicates that the weight loss of precursor mainly depends on the calcination temperature, and little depends on the calcination time. Measurements of CeO 2 relative density show that the relative density of CeO 2 nanocrystalline powders increases with increasing CeO 2 particle size.
文摘Based on the experimental results, in which the fabricated error of the double layer frequency selective surface (FSS) leads to the transmission loss and the resonant frequency leaves away the design resonant frequency, the inter-layer separation distance (ISD) and the unit cell aligning error (UAE) were used as main variables to study the transmission performance attenuation of the double layer FSS configuration. The numerical analysis model for ISD and UAE was established and also was used to simulate the ring unit cell FSS transmission performance by the finite element and periodic moment methods. The double layer ring aperture FSS configuration designed was used as the numerical model. As a result of the numerical analysis, it is shown that both ISD and UAE produce insertion transmission loss (ITL) and insertion phase distortion (IPD) directly. Furthermore, ISD results in more loss of the amplitude of the transmitted signal for the FSS than UAE. It is significant for the designer of the multiplayer FSS to assign the fabricated error of the FSS dielectric layers. The UAE introduces the insertion phase variation badly.
基金supported by National Natural Science Foundation of China(Grant No. 50775057)
文摘For the technology of diamond cutting of optical glass, the high tool wear rate is a main reason for hindering the practical application of this technology. Many researches on diamond tool wear in glass cutting rest on wear phenomenon describing simply without analyzing the genesis of wear phenomenon and interpreting the formation process of tool wear in mechanics. For in depth understanding of the tool wear and its effect on surface roughness in diamond cutting of glass, experiments of diamond turning with cutting distance increasing gradually are carried out on soda-lime glass. The wear morphology of rake face and flank face, the corresponding surface features of workpiece and the surface roughness, and the material compositions of flank wear area are detected. Experimental results indicate that the flank wear is predominant in diamond cutting glass and the flank wear land is characterized by micro-grooves, some smooth crater on the rake face is also seen. The surface roughness begins to increase rapidly, when the cutting mode changes from ductile to brittle for the aggravation of tool wear with the cutting distance over 150 m. The main mechanisms of inducing tool wear in diamond cutting of glass are diffusion, mechanical friction, thermo-chemical action and abrasive wear. The proposed research makes analysis and research from wear mechanism on the tool wear and its effect on surface roughness in diamond cutting of glass, and provides theoretical basis for minimizing the tool wear in diamond cutting brittle materials, such as optical glass.
基金The authors are grateful for the financial support by the National Natural Science Foundation of China(Grant No.50635030)the Scientific and Technological Development Project of Jilin Province(Grant No.20050539)the"985 Project"of Jilin University.
文摘In this paper, a wild boar head was taken as the bionic research object for the development of new ridgers, a kind of plough. The reverse engineering technology was adopted to obtain the surface geometrical information of the head. Several three-dimensional (3D) point clouds of the head were captured first using a non-touch laser scanner, and an integrated point cloud was generated by aligning these point clouds using UG/Imageware. Then, the digital surface model of the head was rebuilt by means of CATIA. The characteristic curves of the surface model were analyzed. The results show that the average error between the rebuilt surface and the point cloud is ?0.431 mm. The max curvature of the ridge on the neb of the head is 0.187 mm?1, and the max and min Gauss curvatures on the surface are 0.008 mm?2 and ?0.002 mm?2. These geometrical information are the essential parameters for biomimetics study of the ridger.