Low-noise high-stability current sources have essential applications such as neutron electric dipole moment measurement and high-stability magnetometers. Previous studies mainly focused on frequency noise above 0.1 Hz...Low-noise high-stability current sources have essential applications such as neutron electric dipole moment measurement and high-stability magnetometers. Previous studies mainly focused on frequency noise above 0.1 Hz while less on the low-frequency noise/drift. We use double resonance alignment magnetometers(DRAMs) to measure and suppress the low-frequency noise of a homemade current source(CS) board. The CS board noise level is suppressed by about 10 times in the range of 0.001-0.1 Hz and is reduced to 100 n A/√Hz at 0.001 Hz. The relative stability of CS board can reach2.2 × 10^(-8). In addition, the DRAM shows a better resolution and accuracy than a commercial 7.5-digit multimeter when measuring our homemade CS board. Further, by combining the DRAM with a double resonance orientation magnetometer,we may realize a low-noise CS in the 0.001-1000 Hz range.展开更多
In order to reduce the external magnetic field and improve the conversion efficiency of high-power microwave generation devices with low external magnetic field,a novel diode with an embedded soft magnetic and shieldi...In order to reduce the external magnetic field and improve the conversion efficiency of high-power microwave generation devices with low external magnetic field,a novel diode with an embedded soft magnetic and shielding structure is proposed.The soft magnetic material is designed to enhance the local magnetic field in the diode region.Moreover,the diode applies a shielding structure which can reduce the radial electric field.From simulation research,it is found that the emission and transmission quality of the electron beam with low magnetic field is greatly improved when loading this diode.Through simulation research,it is verified that the diode can increase the conversion efficiency of the transit-time oscillator(TTO)from 30%to 36.7%.In our experimental study,under the conditions of a diode voltage of 540 kV and a current of 10.5 kA,the output microwave power is 1.51 GW when loading the novel diode and the microwave frequency is 4.27 GHz when an external guiding magnetic field of 0.3 T is applied.The corresponding conversion efficiency is improved from 20.0%to 26.6%,which is 6.6%higher than that of a device loaded with a conventional diode.Our experiments have verified that this novel diode can effectively improve the conversion efficiency of high-power microwave sources operating with low magnetic field,and contribute to the miniaturization and compactness of high-power microwave devices.展开更多
Since the first laser was invented,the pursuit of high-energy lasers(HELs)has always been enthusiastic.The first revolution of HELs was pushed by the fusion of laser and aerospace in the 1960s,with the chemical rocket...Since the first laser was invented,the pursuit of high-energy lasers(HELs)has always been enthusiastic.The first revolution of HELs was pushed by the fusion of laser and aerospace in the 1960s,with the chemical rocket engines giving fresh impetus to the birth of gas flow and chemical lasers,which finally turned megawatt lasers from dream into reality.Nowadays,the development of HELs has entered the age of electricity as well as the rocket engines.The properties of current electric rocket engines are highly consistent with HELs’goals,including electrical driving,effective heat dissipation,little medium consumption and extremely light weight and size,which inspired a second fusion of laser and aerospace and motivated the exploration for potential HELs.As an exploratory attempt,a new configuration of diode pumped metastable rare gas laser was demonstrated,with the gain generator resembling an electric rocket-engine for improved power scaling ability.展开更多
Impact of amplified spontaneous emission(ASE)noise on the stimulated Raman scattering(SRS)threshold of highpower fiber amplifiers is demonstrated numerically through a spectral evolution approach.The simulation result...Impact of amplified spontaneous emission(ASE)noise on the stimulated Raman scattering(SRS)threshold of highpower fiber amplifiers is demonstrated numerically through a spectral evolution approach.The simulation results confirm that ASE noise in the Raman wavelength band could reduce the SRS threshold of high-power fiber amplifiers significantly.As for ASE noise originated the main amplifier,it becomes stronger and reduces the SRS threshold at shorter operation wavelength below 1052 nm.As for ASE noise originated from the seed laser,it reduces the SRS threshold at different operation wavelength under the condition that the Raman ratio is over-90 dB in the seed laser.The theoretical method and results in this work could provide a well reference to extend the operation wavelength of high-power fiber lasers.展开更多
The electron injection and acceleration driven by a few-cycle laser with a sharp vacuum-plasma boundary have been investigated through three-dimensional(3D)particle-in-cell simulations.It is found that an isotropic bo...The electron injection and acceleration driven by a few-cycle laser with a sharp vacuum-plasma boundary have been investigated through three-dimensional(3D)particle-in-cell simulations.It is found that an isotropic boundary impact injection(BII)first occurs at the vacuum-plasma boundary,and then carrier-envelope-phase(CEP)shift causes the transverse oscillation of the plasma bubble,resulting in a periodic electron self-injection(SI)in the laser polarization direction.It shows that the electron charge of the BII only accounts for a small part of the total charge,and the CEP can effectively tune the quality of the injected electron beam.The dependences of laser intensity and electron density on the total charge and the ratio of BII charge to the total charge are studied.The results are beneficial to electron acceleration and its applications,such as betatron radiation source.展开更多
As metallic nanoparticles are arranged to form a 2D periodic nano-array,the coupling of the localized surface plasmonic resonance(LSPR)results in the well-known phenomenon of surface lattice resonances(SLRs).We theore...As metallic nanoparticles are arranged to form a 2D periodic nano-array,the coupling of the localized surface plasmonic resonance(LSPR)results in the well-known phenomenon of surface lattice resonances(SLRs).We theoretically investigate the SLR effect of the circular nano-array fabricated on the fiber tips.The difference between the 2D periodic and circular periodic arrays results in different resonant characteristics.For both structures,the resonant peaks due to the SLRs shift continuously as the array structures are adjusted.For some specific arrangements,the circular nano-array may generate a single sharp resonant peak with extremely high enhancement,which originates from the collective coupling of the whole array.More interestingly,the spatial pattern of the vector near-field corresponding to the sharp peak is independent of the polarization state of the incidence,facilitating its excitation and regulation.This finding may be helpful for designing multifunctional all-fiber devices.展开更多
The dual-axis rotational inertial navigation system(INS)with dithered ring laser gyro(DRLG)is widely used in high precision navigation.The major inertial sensor errors such as drift errors of gyro and accelerometer ca...The dual-axis rotational inertial navigation system(INS)with dithered ring laser gyro(DRLG)is widely used in high precision navigation.The major inertial sensor errors such as drift errors of gyro and accelerometer can be averaged out,but the G-sensitive drifts of laser gyro cannot be averaged out by indexing.A 16-position rotational simulation experiment proves the G-sensitive drift will affect the long-term navigation error for the rotational INS quantitatively.The vibration coupling and asymmetric structure of the DRLG are the main errors.A new dithered mechanism and optimized DRLG is designed.The validity and efficiency of the optimized design are conformed by 1 g sinusoidal vibration experiments.An optimized inertial measurement unit(IMU)is formulated and measured experimentally.Laboratory and vehicle experimental results show that the divergence speed of longitude errors can be effectively slowed down in the optimized IMU.In long term independent navigation,the position accuracy of dual-axis rotational INS is improved close to 50%,and the G-sensitive drifts of laser gyro in the optimized IMU are less than 0.0002°/h.These results have important theoretical significance and practical value for improving the structural dynamic characteristics of DRLG INS,especially the highprecision inertial system.展开更多
Alkali-metal atomic magnetometers employing longitudinal carrier magnetic field have ultrahigh sensitivity to measure transverse magnetic fields and have been applied in a variety of precise-measurement science and te...Alkali-metal atomic magnetometers employing longitudinal carrier magnetic field have ultrahigh sensitivity to measure transverse magnetic fields and have been applied in a variety of precise-measurement science and technologies.In practice,the magnetometer response is not rigorously proportional to the measured transverse magnetic fields and the existing fundamental analytical model of this magnetometer is effective only when the amplitudes of the measured fields are very small.In this paper,we present a modified analytical model to characterize the practical performance of the magnetometer more definitely.We find out how the longitudinal magnetization of the alkali metal atoms vary with larger transverse fields.The linear-response capacity of the magnetometer is determined by these factors:the amplitude and frequency of the longitudinal carrier field,longitudinal and transverse spin relaxation time of the alkali spins and rotation frequency of the transverse fields.We give a detailed and rigorous theoretical derivation by using the perturbation-iteration method and simulation experiments are conducted to verify the validity and correctness of the proposed modified model.This model can be helpful for measuring larger fields more accurately and configuring a desirable magnetometer with proper linear range.展开更多
Nodal line semimetal(NLS) is a new quantum state hosting one-dimensional closed loops formed by the crossing of two bands. The so-called type-Ⅱ NLS means that these two crossing bands have the same sign in their slop...Nodal line semimetal(NLS) is a new quantum state hosting one-dimensional closed loops formed by the crossing of two bands. The so-called type-Ⅱ NLS means that these two crossing bands have the same sign in their slopes along the radial direction of the loop, which requires that the crossing bands are either right-tilted or left-tilted at the same time. According to the theoretical prediction, Mg3Bi2 is an ideal candidate for studying the type-Ⅱ NLS by tuning its spin-orbit coupling(SOC). High-quality Mg3 Bi2 films are grown by molecular beam epitaxy(MBE). By in-situ angle resolved photoemission spectroscopy(ARPES), a pair of surface resonance bands around theГ point are clearly seen. This shows that Mg3Bi2 films grown by MBE are Mg(1)-terminated by comparing the ARPES spectra with the first principles calculations results. Moreover, the temperature dependent weak anti-localization effect in Mg3Bi2 films is observed under magneto-transport measurements, which shows clear two-dimensional(2 D) e-e scattering characteristics by fitting with the Hikami–Larkin–Nagaoka model. Therefore, by combining with ARPES, magneto-transport measurements and the first principles calculations, this work proves that Mg3Bi2 is a semimetal with topological surface states. This paves the way for Mg3Bi2 to be used as an ideal material platform to study the exotic features of type-Ⅱ nodal line semimetals and the topological phase transition by tuning its SOC.展开更多
The intrinsic transverse relaxation mechanisms of polarized alkali atoms enclosed in the radio-frequency magnetometer cell are investigated.The intrinsic transverse relaxation rate of cesium atoms as a function of cel...The intrinsic transverse relaxation mechanisms of polarized alkali atoms enclosed in the radio-frequency magnetometer cell are investigated.The intrinsic transverse relaxation rate of cesium atoms as a function of cell temperature is obtained.The absorption of alkali atoms by the glass wall and the reservoir effect are the main error factors which contribute to the disagreements between theory and experiments.A modified relaxation model is presented, in which both the absorption of alkali atoms by the glass wall and the reservoir effect are included.This study provides a more accurate description of the intrinsic transverse relaxation mechanisms of polarized alkali atoms, and enlightens the optimization of the cell design.展开更多
A novel transit-time oscillator(TTO)is proposed in this paper.An axial cathode which has been widely used in high power microwave(HPM)source and an extractor with radial feature are adopted.In this way,the inherent ad...A novel transit-time oscillator(TTO)is proposed in this paper.An axial cathode which has been widely used in high power microwave(HPM)source and an extractor with radial feature are adopted.In this way,the inherent advantages of axial and radial TTO,both of which can be utilized as high-quality intense relativistic electron beam(IREB),can be generated and the power capacity is also increased.The working mode isπ/2 mode of TM01 based on small-signal theory,and under the same energy storage,the maximum electric field in extractor decreases 16.3%.Besides,by utilizing the natural bending of the solenoid,this TTO saves over 60%of the length required by the uniform magnetic field,and consequently reduces the energy consumed by solenoid.The PIC simulation shows that by using 1.0-T decreasing magnetic field generated by the shorter solenoid,3.37-GW microwave at 12.43 GHz is generated with 620-kV and 13.27-kA input,and the overall conversion efficiency is 41%.展开更多
Magnetic coils for specific requirements are widely used in modern quantum physics. In this study, a general analytical method of designing the shielded coils for generating an arbitrary axial magnetic field is propos...Magnetic coils for specific requirements are widely used in modern quantum physics. In this study, a general analytical method of designing the shielded coils for generating an arbitrary axial magnetic field is proposed. The theoretical formula for an axial magnetic field generated by a single shielded coil is obtained and used to construct specific coils. The structural parameters of these coils are determined by fitting the theoretical formula with their specific requirements. The feasibility of this method is proved by realizing four concrete kinds of coils: uniform magnetic field generating coils, gradient magnetic field generating coils, asymmetrical uniform magnetic field generating coils, and parabolic magnetic field generating coils. The correctness of these theoretical results is demonstrated by both the finite element simulations and the relevant experimental results. Furthermore, the application of this method is of great significance for developing the quantum physics and quantum devices in future.展开更多
In this work, we investigate suppressing mode instability in detail by varying the seed power in a large mode area all-fiber amplifier with a fiber core diameter of 25 μm. The transverse mode instability(TMI) thresho...In this work, we investigate suppressing mode instability in detail by varying the seed power in a large mode area all-fiber amplifier with a fiber core diameter of 25 μm. The transverse mode instability(TMI) thresholds are systematically measured for different seed power. Our experimental results reveal that increasing the seed power has a positive influence on enhancing the output power before the TMI effect appears, and finally the TMI threshold is approximately doubled from1030 W to 2280 W when the seed power is increased from 27 W to 875 W. Almost 84.7% slope efficiency is reached with different seed power before the TMI threshold power. During our operation, we also find that in this type of LMA fiber the beam quality of the amplifier is degraded gradually instead of a sudden change as the pump power increases.展开更多
To satisfy the demands for compact,inexpensive terahertz(THz)sources with power of hundreds of watts,a radial sheet beam THz source which does not require an external magnetic field and is driven by a radial pseudospa...To satisfy the demands for compact,inexpensive terahertz(THz)sources with power of hundreds of watts,a radial sheet beam THz source which does not require an external magnetic field and is driven by a radial pseudospark discharge plasma electron gun(PSDP-EGUN)is proposed.Radial design has been used in pseudospark switches,but in this paper the design of a PSDP-EGUN to drive a radial THz source is presented for the first time.Being different from the latest reported axial quasi-rectangular sheet beam THz sources driven by an axial PSDP-EGUN,a new desig n consisti ng of a circular plate-shaped sheet beam that is directly gen erated by the radial PSDP-EGUN is reported.As compared to an axial system,the radial configuration may result in a larger beam current and a larger beam-wave interaction area together with a higher potential of THz output power.Theoretical analysis and pailicle-in-cell simulation have been employed in the design of the radial sheet beam THz source.Output powers in the kilowatt range have been observed in the simulation of this 0.22 THz source.Preliminary experimental results of the radial PSDP-EGUN are also presented.展开更多
Space radiation with inherently broadband spectral flux poses a huge danger to astronauts and electronics on aircraft,but it is hard to simulate such feature with conventional radiation sources. Using a tabletop laser...Space radiation with inherently broadband spectral flux poses a huge danger to astronauts and electronics on aircraft,but it is hard to simulate such feature with conventional radiation sources. Using a tabletop laser-plasma accelerator, we can reproduce exponential energy particle beams as similar as possible to these in space radiation. We used such an electron beam to study the electron radiation effects on the surface structure and performance of two-dimensional material(Fe PS3).Energetic electron beam led to bulk sample cleavage and damage between areas of uneven thickness. For the Fe PS3sheet sample, electron radiation transformed it from crystalline state to amorphous state, causing the sample surface to rough.The full widths at the half maximum of characteristic Raman peaks became larger, and the intensities of characteristic Raman peaks became weak or even disappeared dramatically under electron radiation. This trend became more obvious for thinner samples, and this phenomenon was attributed to the cleavage of P–P and P–S bonds, destabilizing the bipyramid structure of [P2S6]4-unit. The results are of great significance for testing the maximum allowable radiation dose for the two-dimensional material, implying that Fe PS3cannot withstand such energetic electron radiation without an essential shield.展开更多
A new scheme is proposed to improve the electron beam quality of ionization-induced injection by tailoring gas profile in laser wakefield acceleration.Two-dimensional particle-in-cell simulations show that the ionizat...A new scheme is proposed to improve the electron beam quality of ionization-induced injection by tailoring gas profile in laser wakefield acceleration.Two-dimensional particle-in-cell simulations show that the ionization-induced injection mainly occurs in high-density stage and automatically truncates in low-density stage due to the decrease of the wakefield potential difference.The beam loading can be compensated by the elongated beam resulting from the density transition stage.The beam quality can be improved by shorter injection distance and beam loading effect.A quasi-monoenergetic electron beam with a central energy of 258 MeV and an energy spread of 5.1%is obtained under certain laser-plasma conditions.展开更多
Due to the lack of surface dangling bonds in graphene,the direct growth of high-κ films via atomic layer deposition(ALD) technique often produces the dielectrics with a poor quality,which hinders its integration in m...Due to the lack of surface dangling bonds in graphene,the direct growth of high-κ films via atomic layer deposition(ALD) technique often produces the dielectrics with a poor quality,which hinders its integration in modern semiconductor industry.Previous pretreatment approaches,such as chemical functionalization with ozone and plasma treatments,would inevitably degrade the quality of the underlying graphene.Here,we tackled this problem by utilizing an effective and convenient physical method.In detail,the graphene surface was pretreated with the deposition of thermally evaporated ultrathin Al metal layer prior to the Al2O3 growth by ALD.Then the device was placed in a drying oven for 30 min to be naturally oxidized as a seed layer.With the assistance of an Al oxide seed layer,pinhole-free Al2O3 dielectrics growth on graphene was achieved.No detective defects or disorders were introduced into graphene by Raman characterization.Moreover,our fabricated graphene topgated field effect transistor exhibited high mobility(~6200 cm2V-1s-1) and high transconductance(~117 μS).Thin dielectrics demonstrated a relative permittivity of 6.5 over a large area and a leakage current less than1.6 p A/μm2.These results indicate that Al oxide functionalization is a promising pathway to achieve scaled gate dielectrics on graphene with high performance.展开更多
As a preferable material in the field of photo-detection and catalysis,the characteristics of FePS3 in broad wavelength range have been proven by many experimental studies.However,FePS3 has not been used as a saturabl...As a preferable material in the field of photo-detection and catalysis,the characteristics of FePS3 in broad wavelength range have been proven by many experimental studies.However,FePS3 has not been used as a saturable absorber(SA)in fiber lasers yet.We propose and demonstrate the generation of a single wavelength and dual-wavelength based on an Er-doped fiber laser(EDFL)at 1.5μm by using an innovative FePS3 saturable absorber for the first time.The result shows that a stable passively Q-switched pulse can be generated,which demonstrates that the new two-dimensional(2D)material FePS3 served as SA provides a valid method to realize passively Q-switched laser.In addition,we achieve the output of the dual-wavelength pulse by properly rotating the polarization controller.To the best of our knowledge,the dual-wavelength pulse EDFL could be applied in biomedicine,spectroscopy,and sensing research.展开更多
<div style="text-align:justify;"> A high-efficiency ridged magnetically insulated transmission line oscillator (RMILO) is proposed and investigated theoretically and numerically in this paper. In the R...<div style="text-align:justify;"> A high-efficiency ridged magnetically insulated transmission line oscillator (RMILO) is proposed and investigated theoretically and numerically in this paper. In the RMILO, ridge-disk vanes are introduced to enhance the power efficiency. Theoretical investigation shows that the ridge-disk can enhance the coupling impedance of the slow-wave structure (SWS), and so enhance the power efficiency. Moreover, the ridge has a weak influence on frequency, so, it influences little on the tunability of the MILO. In simulation, when the applied voltage is increased to 807 kV, the RMILO can get the 3 dB tunable frequency range with 7.6 - 13.9 GHz and the 3 dB tuning bandwidth with 58.6% which has an increase of 27.6% compared with the conventional MILO. So, the tuning performance of the RMILO is more superior. Besides, the RMILO gets the maximum output power of 7.1 GW, the corresponding power efficiency is 22.6% and the frequency is 1.400 GHz. Furthermore, when the applied voltage is increased to 807 kV, high-power microwave with a power of 13.5 GW, frequency of 1.400 GHz, and ef?ciency of 24.5% is generated, which has an increase of 20.2% compared with the conventional MILO. The simulation results con?rm the ones predicted by theoretical analysis. </div>展开更多
We report a single-frequency linearly polarized Q-switched fiber laser based on an Nb_(2)GeTe_(4)saturable absorber(SA).The Nb_(2)GeTe_(4)SA triggers passive Q-switching of the laser,and an un-pumped Yb-doped fiber to...We report a single-frequency linearly polarized Q-switched fiber laser based on an Nb_(2)GeTe_(4)saturable absorber(SA).The Nb_(2)GeTe_(4)SA triggers passive Q-switching of the laser,and an un-pumped Yb-doped fiber together with a 0.08-nmbandwidth polarization-maintaining fiber Bragg grating(FBG)acts as an ultra-narrow bandwidth filter to realize singlelongitudinal-mode(SLM)oscillation.The devices used in the laser are all kept polarized,so as to ensure linearly polarized laser output.Stable SLM linearly polarized Q-switching operation at 1064.6 nm is successfully achieved,producing a laser with a shortest pulse width of 1.36μs,a linewidth of 28.4 MHz,a repetition rate of 28.3 kHz-95.9 kHz,and a polarization extinction ratio of about 30 dB.It is believed that the single-frequency linearly polarized pulsed fiber laser studied in this paper has great application value in gravitational wave detection,beam combining,nonlinear frequency conversion,and other fields.展开更多
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 12174446 and 61671458)。
文摘Low-noise high-stability current sources have essential applications such as neutron electric dipole moment measurement and high-stability magnetometers. Previous studies mainly focused on frequency noise above 0.1 Hz while less on the low-frequency noise/drift. We use double resonance alignment magnetometers(DRAMs) to measure and suppress the low-frequency noise of a homemade current source(CS) board. The CS board noise level is suppressed by about 10 times in the range of 0.001-0.1 Hz and is reduced to 100 n A/√Hz at 0.001 Hz. The relative stability of CS board can reach2.2 × 10^(-8). In addition, the DRAM shows a better resolution and accuracy than a commercial 7.5-digit multimeter when measuring our homemade CS board. Further, by combining the DRAM with a double resonance orientation magnetometer,we may realize a low-noise CS in the 0.001-1000 Hz range.
基金Project supported by the National Natural Science Foundation of China (Grant No. 61701516)
文摘In order to reduce the external magnetic field and improve the conversion efficiency of high-power microwave generation devices with low external magnetic field,a novel diode with an embedded soft magnetic and shielding structure is proposed.The soft magnetic material is designed to enhance the local magnetic field in the diode region.Moreover,the diode applies a shielding structure which can reduce the radial electric field.From simulation research,it is found that the emission and transmission quality of the electron beam with low magnetic field is greatly improved when loading this diode.Through simulation research,it is verified that the diode can increase the conversion efficiency of the transit-time oscillator(TTO)from 30%to 36.7%.In our experimental study,under the conditions of a diode voltage of 540 kV and a current of 10.5 kA,the output microwave power is 1.51 GW when loading the novel diode and the microwave frequency is 4.27 GHz when an external guiding magnetic field of 0.3 T is applied.The corresponding conversion efficiency is improved from 20.0%to 26.6%,which is 6.6%higher than that of a device loaded with a conventional diode.Our experiments have verified that this novel diode can effectively improve the conversion efficiency of high-power microwave sources operating with low magnetic field,and contribute to the miniaturization and compactness of high-power microwave devices.
文摘Since the first laser was invented,the pursuit of high-energy lasers(HELs)has always been enthusiastic.The first revolution of HELs was pushed by the fusion of laser and aerospace in the 1960s,with the chemical rocket engines giving fresh impetus to the birth of gas flow and chemical lasers,which finally turned megawatt lasers from dream into reality.Nowadays,the development of HELs has entered the age of electricity as well as the rocket engines.The properties of current electric rocket engines are highly consistent with HELs’goals,including electrical driving,effective heat dissipation,little medium consumption and extremely light weight and size,which inspired a second fusion of laser and aerospace and motivated the exploration for potential HELs.As an exploratory attempt,a new configuration of diode pumped metastable rare gas laser was demonstrated,with the gain generator resembling an electric rocket-engine for improved power scaling ability.
基金the National Natural Science Foundation of China(Grant Nos.62005313 and 62061136013).
文摘Impact of amplified spontaneous emission(ASE)noise on the stimulated Raman scattering(SRS)threshold of highpower fiber amplifiers is demonstrated numerically through a spectral evolution approach.The simulation results confirm that ASE noise in the Raman wavelength band could reduce the SRS threshold of high-power fiber amplifiers significantly.As for ASE noise originated the main amplifier,it becomes stronger and reduces the SRS threshold at shorter operation wavelength below 1052 nm.As for ASE noise originated from the seed laser,it reduces the SRS threshold at different operation wavelength under the condition that the Raman ratio is over-90 dB in the seed laser.The theoretical method and results in this work could provide a well reference to extend the operation wavelength of high-power fiber lasers.
基金the National Natural Science Foundation of China(Grant Nos.12005297,12175309,12175310,11975308,and 12275356)the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDA25050200)+3 种基金the Research Project of NUDT(Grant No.ZK21-12)the Key Laboratory Foundation of Laser Plasma of Ministry of Educationthe financial support from the NUDT Young Innovator Awards(Grant No.20190102)Outstanding Young Talents。
文摘The electron injection and acceleration driven by a few-cycle laser with a sharp vacuum-plasma boundary have been investigated through three-dimensional(3D)particle-in-cell simulations.It is found that an isotropic boundary impact injection(BII)first occurs at the vacuum-plasma boundary,and then carrier-envelope-phase(CEP)shift causes the transverse oscillation of the plasma bubble,resulting in a periodic electron self-injection(SI)in the laser polarization direction.It shows that the electron charge of the BII only accounts for a small part of the total charge,and the CEP can effectively tune the quality of the injected electron beam.The dependences of laser intensity and electron density on the total charge and the ratio of BII charge to the total charge are studied.The results are beneficial to electron acceleration and its applications,such as betatron radiation source.
基金supported by the National Natural Science Foundation of China (Grant No.12174085)the Fundamental Research Funds for the Central Universities (Grant No.B220202018)+1 种基金the Changzhou Science and Technology Program (Grant No.CJ20210130)CAS Key Laboratory of Nanodevices and Applications (Grant No.21YZ03)。
文摘As metallic nanoparticles are arranged to form a 2D periodic nano-array,the coupling of the localized surface plasmonic resonance(LSPR)results in the well-known phenomenon of surface lattice resonances(SLRs).We theoretically investigate the SLR effect of the circular nano-array fabricated on the fiber tips.The difference between the 2D periodic and circular periodic arrays results in different resonant characteristics.For both structures,the resonant peaks due to the SLRs shift continuously as the array structures are adjusted.For some specific arrangements,the circular nano-array may generate a single sharp resonant peak with extremely high enhancement,which originates from the collective coupling of the whole array.More interestingly,the spatial pattern of the vector near-field corresponding to the sharp peak is independent of the polarization state of the incidence,facilitating its excitation and regulation.This finding may be helpful for designing multifunctional all-fiber devices.
基金supported by the National Natural Science Foundation of China(61503399).
文摘The dual-axis rotational inertial navigation system(INS)with dithered ring laser gyro(DRLG)is widely used in high precision navigation.The major inertial sensor errors such as drift errors of gyro and accelerometer can be averaged out,but the G-sensitive drifts of laser gyro cannot be averaged out by indexing.A 16-position rotational simulation experiment proves the G-sensitive drift will affect the long-term navigation error for the rotational INS quantitatively.The vibration coupling and asymmetric structure of the DRLG are the main errors.A new dithered mechanism and optimized DRLG is designed.The validity and efficiency of the optimized design are conformed by 1 g sinusoidal vibration experiments.An optimized inertial measurement unit(IMU)is formulated and measured experimentally.Laboratory and vehicle experimental results show that the divergence speed of longitude errors can be effectively slowed down in the optimized IMU.In long term independent navigation,the position accuracy of dual-axis rotational INS is improved close to 50%,and the G-sensitive drifts of laser gyro in the optimized IMU are less than 0.0002°/h.These results have important theoretical significance and practical value for improving the structural dynamic characteristics of DRLG INS,especially the highprecision inertial system.
基金the Hunan Graduate Research and Innovation Project(Grant No.CX2018B009)the Natural Science Foundation of Hunan(Grant No.2018JJ3608)+1 种基金the Research Project of National University of Defense Technology(Grant Nos.ZK170204 and ZZKY-YX-07-02)the National Natural Science Foundation of China(Grant Nos.61671458 and 61701515).
文摘Alkali-metal atomic magnetometers employing longitudinal carrier magnetic field have ultrahigh sensitivity to measure transverse magnetic fields and have been applied in a variety of precise-measurement science and technologies.In practice,the magnetometer response is not rigorously proportional to the measured transverse magnetic fields and the existing fundamental analytical model of this magnetometer is effective only when the amplitudes of the measured fields are very small.In this paper,we present a modified analytical model to characterize the practical performance of the magnetometer more definitely.We find out how the longitudinal magnetization of the alkali metal atoms vary with larger transverse fields.The linear-response capacity of the magnetometer is determined by these factors:the amplitude and frequency of the longitudinal carrier field,longitudinal and transverse spin relaxation time of the alkali spins and rotation frequency of the transverse fields.We give a detailed and rigorous theoretical derivation by using the perturbation-iteration method and simulation experiments are conducted to verify the validity and correctness of the proposed modified model.This model can be helpful for measuring larger fields more accurately and configuring a desirable magnetometer with proper linear range.
基金Supported by the Science Challenge Project under Grant No TZ2016004the Opening Foundation of State Key Laboratory of High Performance Computing under Grant No 201601-02+4 种基金the Foundation of President of CAEP under Grant No 201501040the Natural Science Foundation of Hunan Province under Grant No 2016JJ1021the National Basic Research Program of China under Grant Nos 2015CB921303 and 2012YQ13012508the General Program of Beijing Academy of Quantum Information Sciences under Grant No Y18G17the Youth Talent Lifting Project under Grant No 17-JCJQ-QT-004
文摘Nodal line semimetal(NLS) is a new quantum state hosting one-dimensional closed loops formed by the crossing of two bands. The so-called type-Ⅱ NLS means that these two crossing bands have the same sign in their slopes along the radial direction of the loop, which requires that the crossing bands are either right-tilted or left-tilted at the same time. According to the theoretical prediction, Mg3Bi2 is an ideal candidate for studying the type-Ⅱ NLS by tuning its spin-orbit coupling(SOC). High-quality Mg3 Bi2 films are grown by molecular beam epitaxy(MBE). By in-situ angle resolved photoemission spectroscopy(ARPES), a pair of surface resonance bands around theГ point are clearly seen. This shows that Mg3Bi2 films grown by MBE are Mg(1)-terminated by comparing the ARPES spectra with the first principles calculations results. Moreover, the temperature dependent weak anti-localization effect in Mg3Bi2 films is observed under magneto-transport measurements, which shows clear two-dimensional(2 D) e-e scattering characteristics by fitting with the Hikami–Larkin–Nagaoka model. Therefore, by combining with ARPES, magneto-transport measurements and the first principles calculations, this work proves that Mg3Bi2 is a semimetal with topological surface states. This paves the way for Mg3Bi2 to be used as an ideal material platform to study the exotic features of type-Ⅱ nodal line semimetals and the topological phase transition by tuning its SOC.
基金Project supported by the National Natural Science Foundation of China(Grant No.61475192)
文摘The intrinsic transverse relaxation mechanisms of polarized alkali atoms enclosed in the radio-frequency magnetometer cell are investigated.The intrinsic transverse relaxation rate of cesium atoms as a function of cell temperature is obtained.The absorption of alkali atoms by the glass wall and the reservoir effect are the main error factors which contribute to the disagreements between theory and experiments.A modified relaxation model is presented, in which both the absorption of alkali atoms by the glass wall and the reservoir effect are included.This study provides a more accurate description of the intrinsic transverse relaxation mechanisms of polarized alkali atoms, and enlightens the optimization of the cell design.
基金Project supported by the National Natural Science Foundation of China(Grant No.61701516)
文摘A novel transit-time oscillator(TTO)is proposed in this paper.An axial cathode which has been widely used in high power microwave(HPM)source and an extractor with radial feature are adopted.In this way,the inherent advantages of axial and radial TTO,both of which can be utilized as high-quality intense relativistic electron beam(IREB),can be generated and the power capacity is also increased.The working mode isπ/2 mode of TM01 based on small-signal theory,and under the same energy storage,the maximum electric field in extractor decreases 16.3%.Besides,by utilizing the natural bending of the solenoid,this TTO saves over 60%of the length required by the uniform magnetic field,and consequently reduces the energy consumed by solenoid.The PIC simulation shows that by using 1.0-T decreasing magnetic field generated by the shorter solenoid,3.37-GW microwave at 12.43 GHz is generated with 620-kV and 13.27-kA input,and the overall conversion efficiency is 41%.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61701515 and 61671458)the Postdoctoral Science Foundation,China(Grant No.2017M613367)+1 种基金the Natural Science Foundation of Hunan Province,China(Grant No.2018JJ3608)the Research Project of National University of Defense Technology,China(Grant No.ZK170204)
文摘Magnetic coils for specific requirements are widely used in modern quantum physics. In this study, a general analytical method of designing the shielded coils for generating an arbitrary axial magnetic field is proposed. The theoretical formula for an axial magnetic field generated by a single shielded coil is obtained and used to construct specific coils. The structural parameters of these coils are determined by fitting the theoretical formula with their specific requirements. The feasibility of this method is proved by realizing four concrete kinds of coils: uniform magnetic field generating coils, gradient magnetic field generating coils, asymmetrical uniform magnetic field generating coils, and parabolic magnetic field generating coils. The correctness of these theoretical results is demonstrated by both the finite element simulations and the relevant experimental results. Furthermore, the application of this method is of great significance for developing the quantum physics and quantum devices in future.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61735007 and 61505260)
文摘In this work, we investigate suppressing mode instability in detail by varying the seed power in a large mode area all-fiber amplifier with a fiber core diameter of 25 μm. The transverse mode instability(TMI) thresholds are systematically measured for different seed power. Our experimental results reveal that increasing the seed power has a positive influence on enhancing the output power before the TMI effect appears, and finally the TMI threshold is approximately doubled from1030 W to 2280 W when the seed power is increased from 27 W to 875 W. Almost 84.7% slope efficiency is reached with different seed power before the TMI threshold power. During our operation, we also find that in this type of LMA fiber the beam quality of the amplifier is degraded gradually instead of a sudden change as the pump power increases.
文摘To satisfy the demands for compact,inexpensive terahertz(THz)sources with power of hundreds of watts,a radial sheet beam THz source which does not require an external magnetic field and is driven by a radial pseudospark discharge plasma electron gun(PSDP-EGUN)is proposed.Radial design has been used in pseudospark switches,but in this paper the design of a PSDP-EGUN to drive a radial THz source is presented for the first time.Being different from the latest reported axial quasi-rectangular sheet beam THz sources driven by an axial PSDP-EGUN,a new desig n consisti ng of a circular plate-shaped sheet beam that is directly gen erated by the radial PSDP-EGUN is reported.As compared to an axial system,the radial configuration may result in a larger beam current and a larger beam-wave interaction area together with a higher potential of THz output power.Theoretical analysis and pailicle-in-cell simulation have been employed in the design of the radial sheet beam THz source.Output powers in the kilowatt range have been observed in the simulation of this 0.22 THz source.Preliminary experimental results of the radial PSDP-EGUN are also presented.
基金Project supported by the National Natural Science Foundation of China(Grant No.11975308)the Strategic Priority Research Program of Chinese Academy of Sciences(Grant No.XDA25050200)Science Challenge Project(Grant No.TZ2018001)。
文摘Space radiation with inherently broadband spectral flux poses a huge danger to astronauts and electronics on aircraft,but it is hard to simulate such feature with conventional radiation sources. Using a tabletop laser-plasma accelerator, we can reproduce exponential energy particle beams as similar as possible to these in space radiation. We used such an electron beam to study the electron radiation effects on the surface structure and performance of two-dimensional material(Fe PS3).Energetic electron beam led to bulk sample cleavage and damage between areas of uneven thickness. For the Fe PS3sheet sample, electron radiation transformed it from crystalline state to amorphous state, causing the sample surface to rough.The full widths at the half maximum of characteristic Raman peaks became larger, and the intensities of characteristic Raman peaks became weak or even disappeared dramatically under electron radiation. This trend became more obvious for thinner samples, and this phenomenon was attributed to the cleavage of P–P and P–S bonds, destabilizing the bipyramid structure of [P2S6]4-unit. The results are of great significance for testing the maximum allowable radiation dose for the two-dimensional material, implying that Fe PS3cannot withstand such energetic electron radiation without an essential shield.
基金supported by the National Natural Science Foundation of China(Grant Nos.12005297,11975308,and 11775305)the Strategic Priority Research Program of Chinese Academy of Sciences(Grant No.XDA25050200)+2 种基金the Fund of Science Challenge Project(Grant No.TZ2018001)Natural Science Foundation of Hunan Province,China(Grant No.2020JJ5651)the Fund of the State Key Laboratory of Laser Interaction with Matter(Grant No.SKLLIM1908)。
文摘A new scheme is proposed to improve the electron beam quality of ionization-induced injection by tailoring gas profile in laser wakefield acceleration.Two-dimensional particle-in-cell simulations show that the ionization-induced injection mainly occurs in high-density stage and automatically truncates in low-density stage due to the decrease of the wakefield potential difference.The beam loading can be compensated by the elongated beam resulting from the density transition stage.The beam quality can be improved by shorter injection distance and beam loading effect.A quasi-monoenergetic electron beam with a central energy of 258 MeV and an energy spread of 5.1%is obtained under certain laser-plasma conditions.
基金Supported by Strengthening Project of Science and Technology Commission Foundation under Grant No.2019JCJQZD。
文摘Due to the lack of surface dangling bonds in graphene,the direct growth of high-κ films via atomic layer deposition(ALD) technique often produces the dielectrics with a poor quality,which hinders its integration in modern semiconductor industry.Previous pretreatment approaches,such as chemical functionalization with ozone and plasma treatments,would inevitably degrade the quality of the underlying graphene.Here,we tackled this problem by utilizing an effective and convenient physical method.In detail,the graphene surface was pretreated with the deposition of thermally evaporated ultrathin Al metal layer prior to the Al2O3 growth by ALD.Then the device was placed in a drying oven for 30 min to be naturally oxidized as a seed layer.With the assistance of an Al oxide seed layer,pinhole-free Al2O3 dielectrics growth on graphene was achieved.No detective defects or disorders were introduced into graphene by Raman characterization.Moreover,our fabricated graphene topgated field effect transistor exhibited high mobility(~6200 cm2V-1s-1) and high transconductance(~117 μS).Thin dielectrics demonstrated a relative permittivity of 6.5 over a large area and a leakage current less than1.6 p A/μm2.These results indicate that Al oxide functionalization is a promising pathway to achieve scaled gate dielectrics on graphene with high performance.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61875223 and 11574349)the Natural Science Foundation of Hunan Province,China(Grant No.2018JJ3610)+1 种基金the Natural Science Foundation of Jiangsu Province,China(Grant Nos.BK20150365 and BK20170424)the Natural Science Foundation of Hainan Province,China(Grant No.117111)
文摘As a preferable material in the field of photo-detection and catalysis,the characteristics of FePS3 in broad wavelength range have been proven by many experimental studies.However,FePS3 has not been used as a saturable absorber(SA)in fiber lasers yet.We propose and demonstrate the generation of a single wavelength and dual-wavelength based on an Er-doped fiber laser(EDFL)at 1.5μm by using an innovative FePS3 saturable absorber for the first time.The result shows that a stable passively Q-switched pulse can be generated,which demonstrates that the new two-dimensional(2D)material FePS3 served as SA provides a valid method to realize passively Q-switched laser.In addition,we achieve the output of the dual-wavelength pulse by properly rotating the polarization controller.To the best of our knowledge,the dual-wavelength pulse EDFL could be applied in biomedicine,spectroscopy,and sensing research.
文摘<div style="text-align:justify;"> A high-efficiency ridged magnetically insulated transmission line oscillator (RMILO) is proposed and investigated theoretically and numerically in this paper. In the RMILO, ridge-disk vanes are introduced to enhance the power efficiency. Theoretical investigation shows that the ridge-disk can enhance the coupling impedance of the slow-wave structure (SWS), and so enhance the power efficiency. Moreover, the ridge has a weak influence on frequency, so, it influences little on the tunability of the MILO. In simulation, when the applied voltage is increased to 807 kV, the RMILO can get the 3 dB tunable frequency range with 7.6 - 13.9 GHz and the 3 dB tuning bandwidth with 58.6% which has an increase of 27.6% compared with the conventional MILO. So, the tuning performance of the RMILO is more superior. Besides, the RMILO gets the maximum output power of 7.1 GW, the corresponding power efficiency is 22.6% and the frequency is 1.400 GHz. Furthermore, when the applied voltage is increased to 807 kV, high-power microwave with a power of 13.5 GW, frequency of 1.400 GHz, and ef?ciency of 24.5% is generated, which has an increase of 20.2% compared with the conventional MILO. The simulation results con?rm the ones predicted by theoretical analysis. </div>
基金Project supported by the National Natural Science Foundation of China(Grant No.62275272)the Training Program for Excellent Young Innovators of Changsha,China(Grant No.KQ2206003).
文摘We report a single-frequency linearly polarized Q-switched fiber laser based on an Nb_(2)GeTe_(4)saturable absorber(SA).The Nb_(2)GeTe_(4)SA triggers passive Q-switching of the laser,and an un-pumped Yb-doped fiber together with a 0.08-nmbandwidth polarization-maintaining fiber Bragg grating(FBG)acts as an ultra-narrow bandwidth filter to realize singlelongitudinal-mode(SLM)oscillation.The devices used in the laser are all kept polarized,so as to ensure linearly polarized laser output.Stable SLM linearly polarized Q-switching operation at 1064.6 nm is successfully achieved,producing a laser with a shortest pulse width of 1.36μs,a linewidth of 28.4 MHz,a repetition rate of 28.3 kHz-95.9 kHz,and a polarization extinction ratio of about 30 dB.It is believed that the single-frequency linearly polarized pulsed fiber laser studied in this paper has great application value in gravitational wave detection,beam combining,nonlinear frequency conversion,and other fields.
