In the seismic profile interpretation process,as the seismic data are big and the small geological features are difficult to identify,improvement of the efficiency is needed. In this study,structure tensor method in c...In the seismic profile interpretation process,as the seismic data are big and the small geological features are difficult to identify,improvement of the efficiency is needed. In this study,structure tensor method in computer image edge detection processing is applied into the 2D seismic profile. Coherent attribute is used to extract formation edge. At the same time,extracting the eigenvalues and eigenvectors to calculate the seismic geometric properties which include dip and apparent dip,automatic identification is achieved. Testing the Gaussian kernel function with synthetic models and comparing the coherent attribute and dip attribute extraction results before and after,the conclusion that Gaussian filter can remove the random noise is obtained.展开更多
Demigration refers to directly applying a specific imaging technique to a migrated section. It is applied primarily to seismic data mapping. In a previous research study,a time-efficient implementation technology of d...Demigration refers to directly applying a specific imaging technique to a migrated section. It is applied primarily to seismic data mapping. In a previous research study,a time-efficient implementation technology of demigration was expounded. In the present study,the Fast Marching Method( FMM) used for traveltime computation in the isochrone-stack demigration,is developed. Furthermore,other key techniques( such as selection of aperture and antialiasing filtering factor) are analyzed in detail. Besides,the detail implementation method and program flow are given,which is shown their good computational efficiency and high-quality demigration effect. This implementation technique is illustrated with both the V( z) model and Marmousi model. It provides a basic method for implementing demigration in the application of seismic data mapping.展开更多
Shallow gas is composed of all kinds of shallow buried natural gas resources( < 1500 m) with relatively small reserve for each gas resource. It has some advantages such as shallow burial depth,good physical propert...Shallow gas is composed of all kinds of shallow buried natural gas resources( < 1500 m) with relatively small reserve for each gas resource. It has some advantages such as shallow burial depth,good physical properties and the huge accumulations. Based on the Wigner-Vill distribution,a general spectral decomposition method is applied in the shallow gas detection. Cone-shaped kernel function filtering method is used to suppress cross-terms of the Wigner-Ville distribution,which is tested on field seismic data. Because of shallow gas reservoir has a characteristic that low frequency energy is stronger and high frequency energy is weaker,it indicates the presence of shallow gas successfully.展开更多
Most fault-block reservoirs in Xinmu oilfield belong to heterogeneous sandstone in characters which has low permeability, and reservoir pollution is a common phenomenon in this area. Acidizing deplugging in oil wells ...Most fault-block reservoirs in Xinmu oilfield belong to heterogeneous sandstone in characters which has low permeability, and reservoir pollution is a common phenomenon in this area. Acidizing deplugging in oil wells has become one of the major measures to improve production efficiency in the field. A compound deplugging technology in high efficiency low corrosion is developed for this kind of low permeability sandstone reservoir. On the basis of profoundly understanding of the reservoir's physical properties and sensitivity, along with comprehensive analysis of the cause for jams in oil wells, a series of experiments are carried out in order to investigate the dissolution reaction among samples and deplugging inhibitor, sample dissolving speed, formation fluid compatibility, reduction of secondary pollution, etc. Considered reservoir condition in nearby wells the optimized compositional deplugging liquid formula is selected for this reservoir. It is featured by reducing the deplugging reaction speed, extending solution for processing radius, preventing secondary damage in dissolution processing, and removing plug pollution effectively. To implement this high efficiency low corrosion deplugging measure based on reservoir condition in the borehole and nearby wells, a relatively better result of deplugging and production increasing is achieved, which enriches the measures to increase production in Xinmu oilfield, and this method can be applied to other similar oilfields for the purpose of maintaining the crude oil production and providing assistant for increasing the production significantly.展开更多
The aperture of natural rock fractures significantly affects the deformation and strength properties of rock masses,as well as the hydrodynamic properties of fractured rock masses.The conventional measurement methods ...The aperture of natural rock fractures significantly affects the deformation and strength properties of rock masses,as well as the hydrodynamic properties of fractured rock masses.The conventional measurement methods are inadequate for collecting data on high-steep rock slopes in complex mountainous regions.This study establishes a high-resolution three-dimensional model of a rock slope using unmanned aerial vehicle(UAV)multi-angle nap-of-the-object photogrammetry to obtain edge feature points of fractures.Fracture opening morphology is characterized using coordinate projection and transformation.Fracture central axis is determined using vertical measuring lines,allowing for the interpretation of aperture of adaptive fracture shape.The feasibility and reliability of the new method are verified at a construction site of a railway in southeast Tibet,China.The study shows that the fracture aperture has a significant interval effect and size effect.The optimal sampling length for fractures is approximately 0.5e1 m,and the optimal aperture interpretation results can be achieved when the measuring line spacing is 1%of the sampling length.Tensile fractures in the study area generally have larger apertures than shear fractures,and their tendency to increase with slope height is also greater than that of shear fractures.The aperture of tensile fractures is generally positively correlated with their trace length,while the correlation between the aperture of shear fractures and their trace length appears to be weak.Fractures of different orientations exhibit certain differences in their distribution of aperture,but generally follow the forms of normal,log-normal,and gamma distributions.This study provides essential data support for rock and slope stability evaluation,which is of significant practical importance.展开更多
There are abundant igneous gas reservoirs in the South China Sea with significant value of research,and lithology classification,mineral analysis and porosity inversion are important links in reservoir evaluation.Howe...There are abundant igneous gas reservoirs in the South China Sea with significant value of research,and lithology classification,mineral analysis and porosity inversion are important links in reservoir evaluation.However,affected by the diverse lithology,complicated mineral and widespread alteration,conventional logging lithology classification and mineral inversion become considerably difficult.At the same time,owing to the limitation of the wireline log response equation,the quantity and accuracy of minerals can hardly meet the exploration requirements of igneous formations.To overcome those issues,this study takes the South China Sea as an example,and combines multi-scale data such as micro rock slices,petrophysical experiments,wireline log and element cutting log to establish a set of joint inversion methods for minerals and porosity of altered igneous rocks.Specifically,we define the lithology and mineral characteristics through core slices and mineral data,and establish an igneous multi-mineral volumetric model.Then we determine element cutting log correction method based on core element data,and combine wireline log and corrected element cutting log to perform the lithology classification and joint inversion of minerals and porosity.However,it is always difficult to determine the elemental eigenvalues of different minerals in inversion.This paper uses multiple linear regression methods to solve this problem.Finally,an integrated inversion technique for altered igneous formations was developed.The results show that the corrected element cutting log are in good agreement with the core element data,and the mineral and porosity results obtained from the joint inversion based on the wireline log and corrected element cutting log are also in good agreement with the core data from X-ray diffraction.The results demonstrate that the inversion technique is applicable and this study provides a new direction for the mineral inversion research of altered igneous formations.展开更多
The Trans-North China Orogen is a major Neoarchean Paleoproterozoic collisional orogenic belt above the North China Craton, formed due to prolonged and complex processes. Even though many NeoarcheanPaleoproterozoic ma...The Trans-North China Orogen is a major Neoarchean Paleoproterozoic collisional orogenic belt above the North China Craton, formed due to prolonged and complex processes. Even though many NeoarcheanPaleoproterozoic magmatic and metamorphic activities have been reported, due to the Huozhou Complex’s small outcropping range, little attention has been paid to the origin of various igneous rocks of the Huozhou Complex in the center of the Trans-North China Orogen. The Huozhou Complex, located south of the Luè liang, Wutai, and Hengshan complexes, is an important window into the Early Precambrian structure and evolution of the North China Craton. Its magma and metamorphism are crucial to understanding the development of the structural evolution of the Trans-North China Orogen. The Huozhou metamorphic complex area exposes a range of Precambrian metamorphic rocks, among which the most extensively dispersed is felsic biotite plagioclase gneiss. In this study comprehensive geological field survey, micropetrology,chronology, geochemistry, and Hf isotope analysis were carried out for the Qinggangping and Anziping gneiss in the north of the Huozhou Complex. The results show that the magmatic zircon age of the Qinggangping gneiss is2196 ± 14 Ma, and its protolith is I-type granite, formed by partial melting of igneous rocks in the absence of weathering. Its source is mainly the juvenile crust from depleted mantle dating 2431–2719 Ma, with a small amount of mantle-derived material. The Anziping gneiss has a metamorphic zircon age of 1931 ± 13 Ma with an S-type granite protolith belonging to peraluminous granite.The Anziping gneiss is formed by recycling pre-existing crustal components at 2613–2848 Ma. A minor quantity of mantle-derived magma is also introduced to the crust simultaneously. The samples of Qinggangping gneiss and Anziping gneiss show the characteristics of obvious negative Nb, Ti, and P elements in the spider diagram of primitive mantle standardization. This implies that the rocks have the characteristics of magmatic rocks in an island arc or subduction environment, which could have formed in the tectonic environment of the continental margin arc.展开更多
Cultivated land is an important natural resource to ensure food,ecological and economic security.The cultivated land quality evaluation(CQE)is greatly significant for protecting and managing cultivated land.In this st...Cultivated land is an important natural resource to ensure food,ecological and economic security.The cultivated land quality evaluation(CQE)is greatly significant for protecting and managing cultivated land.In this study,320 counties in the black soil region of Northeast China(BSRNC)represent the research units used to construct the CQE system measuring the soil properties(SP),cultivated land productivity(CLP),ecological environment(EE)and social economy(SE).The total of 19 factors were selected to calculate the integrated fertility index(IFI)and divided into grades.Simultaneously,we used the coupling coordination degree model to comprehensively analyze the spatial pattern of the cultivated land quality(CLQ)in the BSRNC,and use the structural equation model(SEM)to analyze the driving mechanism.The results show the following:1)The CLQ of 262 counties in the BSRNC is in a state of coupling and coordination,and the coupling and coordination degree presents a spatial distribution pattern of‘high in the southwest and northeast,low in the northwest and southeast’.The coordinated development degree of 271 counties is between 0.4 and 0.6,which is in a transitional state between coordination and disorder.2)The CLQ in the BSRNC is generally good,with an average grade of 3.High-quality cultivated land accounts for 58.45%of all counties,middle-and upper-quality cultivated land accounts for 27.05%,and poor-quality cultivated land accounts for 14.49%.3)The SEM analysis shows that the SP,CLP,EE,and SE all influence the CLQ.Among them,the SP has the largest driving force on the CLQ,while the SE has the smallest driving force on it.The results confirm that the main factors affecting the evaluation results are crop productivity level,normalized difference vegetation index,ratio vegetation index,difference vegetation index,and organic carbon content.When implementing protection measures in counties with a low CLQ,considering a balanced coordination of multiple systems and reasonably controlling the quality degradation are important.This study provides the current situation and driving factors of the CLQ in the BSRNC and will play an important role in black soil governance and utilization.展开更多
Clastic rock reservoir is the main reservoir type in the oil and gas field.Archie formula or various conductive models developed on the basis of Archie’s formula are usually used to interpret this kind of reservoir,a...Clastic rock reservoir is the main reservoir type in the oil and gas field.Archie formula or various conductive models developed on the basis of Archie’s formula are usually used to interpret this kind of reservoir,and the three-water model is widely used as well.However,there are many parameters in the threewater model,and some of them are difficult to determine.Most of the determination methods are based on the statistics of large amount of experimental data.In this study,the authors determine the value of the parameters of the new three-water model based on the nuclear magnetic data and the genetic optimization algorithm.The relative error between the resistivity calculated based on these parameters and the resistivity measured experimentally at 100%water content is 0.9024.The method studied in this paper can be easily applied without much experimental data.It can provide reference for other regions to determine the parameters of the new three-water model.展开更多
The hidden water-bearing structures near the roadway tunnelling face are very likely to cause water seepage accidents in coal mines.Currently,transient electromagnetic(EM)technology has be-come an important method to ...The hidden water-bearing structures near the roadway tunnelling face are very likely to cause water seepage accidents in coal mines.Currently,transient electromagnetic(EM)technology has be-come an important method to detect water damage in advance of roadway excavation.In this paper,the time-domain finite element algorithm based on unstructured tetrahedron grids is used to accurate-ly simulate the geological body in front of the roadway excavation face and analyze its response.The authors detect the distance between the roadway excavation face and the low-resistivity water-bearing body,the resistivity difference between the low-resistivity body and surrounding rock,and the influence of the size of the low-resistivity body on the transient EM response.Furthermore,the common types of low-resistivity bodies in the roadway drivage process are used for modeling to analyze the attenuation of the detected EM response when there are low-resistivity bodies in front of the roadway.The research in this paper can help effectively detecting the water-bearing low-resistivity body in front of the roadway drivage and lay a foundation for reducing the risk of water seepage accidents.展开更多
Altered igneous reservoirs have low porosity and permeability,compact structure and certain heterogeneity.A simple digital core with certain generality and multi-parameter constraints can be con-structed to characteri...Altered igneous reservoirs have low porosity and permeability,compact structure and certain heterogeneity.A simple digital core with certain generality and multi-parameter constraints can be con-structed to characterize the microscopic pore structure and mineral composition.In this paper,based on core X-ray,CT images and whole-rock mineral analysis,threshold segmentation of mass content and grayscale distribution of various minerals in different lithologies of igneous rocks in the buried hill of Huizhou depression is carried out to construct digital core of altered igneous rocks.The results show that after converting the mineral mass content into volume content,the minerals of altered igneous rocks in Huizhou depression can be classified into components.According to the range of grayscale value,components can be divided into six parts.Due to the difference of the content of components in different lithologies of igneous rocks,differentiated grayscale threshold segmentation is needed to obtain the digital core for a single lithology.The final digital core generation process includes two steps:building a single component digital core,and stacking and combining.This kind of universal digital core model can support the subsequent pore scale numerical simulation and comprehensive rock physics research.展开更多
Highly accurate vegetative type distribution information is of great significance for forestry resource monitoring and management.In order to improve the classification accuracy of forest types,Sentinel-1 and 2 data o...Highly accurate vegetative type distribution information is of great significance for forestry resource monitoring and management.In order to improve the classification accuracy of forest types,Sentinel-1 and 2 data of Changbai Mountain protection development zone were selected,and combined with DEM to construct a multi-featured random forest type classification model incorporating fusing intensity,texture,spectral,vegetation index and topography information and using random forest Gini index(GI)for optimization.The overall accuracy of classification was 94.60%and the Kappa coefficient was 0.933.Comparing the classification results before and after feature optimization,it shows that feature optimization has a greater impact on the classification accuracy.Comparing the classification results of random forest,maximum likelihood method and CART decision tree under the same conditions,it shows that the random forest has a higher performance and can be applied to forestry research work such as forest resource survey and monitoring.展开更多
Kerogen content and kerogen porosity play a significant role in elastic properties of organic-rich shales.We construct a rock physics model for organic-rich shales to quantify the effect of kerogen content and kerogen...Kerogen content and kerogen porosity play a significant role in elastic properties of organic-rich shales.We construct a rock physics model for organic-rich shales to quantify the effect of kerogen content and kerogen porosity using the Kuster and Toksoz theory and the selfconsistent approximation method.Rock physics modeling results show that with the increase of kerogen content and kerogen-related porosity,the velocity and density of shales decrease,and the effect of kerogen porosity becomes more obvious only for higher kerogen content.We also find that the Poisson's ratio of the shale is not sensitive to kerogen porosity for the case of gas saturation.Finally,for the seismic reflection responses of an organic-rich shale layer,forward modeling results indicate the fifth type AVO responses which correspond to a negative intercept and a positive gradient.The absolute values of intercept and gradient increase with kerogen content and kerogen porosity,and present predictable variations associated with velocities and density.展开更多
Temperature curves reflect geothermal gradients and local temperature anomalies, thus providing a new understanding of the underground reservoir conditions. When encountering caverns or fractures and fissures during d...Temperature curves reflect geothermal gradients and local temperature anomalies, thus providing a new understanding of the underground reservoir conditions. When encountering caverns or fractures and fissures during drilling, lost circulation may occur and result in a change to the original formation temperature field, and in severe cases, even the conventional open hole well logging data cannot be obtained. This paper uses finite element analysis software COMSOL to establish a heat transfer model for the wellbore/reservoir formation system during drilling and shut-in in the presence of lost circulation, and a case study is made in a carbonate reservoir in the Tahe oilfield. On the basis of the above, we analyze the temperature distribution in the leakage zone, and the studies have shown that the leakage and petrophysical properties have an impact on the temperature of the wellbore and formation, hence we can estimate the reservoir permeability using the temperature data. In addition, the determination of the temperature recovery time after some drilling fluids have leaked into the formation will help in recognizing the subsurface temperature field of the carbonate formation correctly, thus enhancing production logging interpretation accuracy and improving the understanding of later measurements.展开更多
We propose a new 3D inversion scheme to invert the near-and transition-zone data of CSAMT with topography accurately.In this new method,the earth was discretized into unstructured tetrahedra to fit the ragged topograp...We propose a new 3D inversion scheme to invert the near-and transition-zone data of CSAMT with topography accurately.In this new method,the earth was discretized into unstructured tetrahedra to fit the ragged topography and the vector fi nite-element method was adopted to obtain precise responses and good sensitivity.To simulate the attitude and shape of the transmitter,we divided a long-grounded transmitter into dipoles and integrated these dipoles to obtain good responses in the near-and transition-fi eld zones.Next,we designed an L2 norm-based objective functional and applied a standard quasi-Newton method as the optimization method to solve the inverse problem and guarantee steady convergence.We tested our 3D inversion method first on synthetic data and then on a field dataset acquired from select sites near Changbai Mountain,China.In both tests,the new inversion algorithm achieved excellent fitting between the predicted and observed data,even in near-and transition-fi eld zones,and the inversion results agreed well with the true model.These fi ndings reveal that the proposed algorithm is eff ective for 3D inversion of CSAMT data.展开更多
The Multi-angle imaging spectroradiometer(MISR) land-surface(LS) bidirectional reflectance factor(BRF) product(MILS_BRF) has unique semi-simultaneous multi-angle sampling and global coverage. However, unlike on-satell...The Multi-angle imaging spectroradiometer(MISR) land-surface(LS) bidirectional reflectance factor(BRF) product(MILS_BRF) has unique semi-simultaneous multi-angle sampling and global coverage. However, unlike on-satellite observations, the spatio-temporal characteristics of MILS_BRF data have rarely been explicitly and comprehensively analysed. Results from 5-yr(2011–2015) of MILS_BRF dataset from a typical region in central Northeast Asia as the study area showed that the monthly area coverage as well as MILS_BRF data quantity varies significantly, from the highest in October(99.05%) through median in June/July(78.09%/75.21%) to lowest in January(18.97%), and a large data-vacant area exists in the study area during four consecutive winter months(December through March). The data-vacant area is mainly composed of crop lands and cropland/natural vegetation mosaic. The amount of data within the principal plane(PP)±30°(nPP) or cross PP ±30°(nCP), varies intra-annually with significant differences from different view zeniths or forward/backward scattering directions. For example, multiple off-nadir cameras have nPP but no nCP data for up to six months(September through February), with the opposite occurring in June and July. This study provides explicit and comprehensive information about the spatio-temporal characteristics of product coverage and observation geometry of MILS_BRF in the study area. Results provide required user reference information for MILS_BRF to evaluate performance of BRDF models or to compare with other satellite-derived BRF or albedo products. Comparing this final product to on-satellite observations, what was found here reveals a new perspective on product spatial coverage and observation geometry for multi-angle remote sensing.展开更多
1 Introduction Vegetation indices(VIs)derived from satellite observations are an essential source of information for operational monitoring of the Earth’s vegetation(Qu et al.,2018;Yan et al.,2008).However,soil backg...1 Introduction Vegetation indices(VIs)derived from satellite observations are an essential source of information for operational monitoring of the Earth’s vegetation(Qu et al.,2018;Yan et al.,2008).However,soil background dramatically affects the performances ofⅥs(Baret and Guyot,1991;Gilabert et al.,2002;Huete,1988;Qi et al,1994).展开更多
BP( Back Propagation) neural network and PSO( Particle Swarm Optimization) are two main heuristic optimization methods,and are usually used as nonlinear inversion methods in geophysics. The authors applied BP neural n...BP( Back Propagation) neural network and PSO( Particle Swarm Optimization) are two main heuristic optimization methods,and are usually used as nonlinear inversion methods in geophysics. The authors applied BP neural network and BP neural network optimized with PSO into the inversion of 3D density interface respectively,and a comparison was drawn to demonstrate the inversion results. To start with,a synthetic density interface model was created and we used the proceeding inversion methods to test their effectiveness. And then two methods were applied into the inversion of the depth of Moho interface. According to the results,it is clear to find that the application effect of PSO-BP is better than that of BP network. The BP network structures used in both synthetic and field data are consistent in order to obtain preferable inversion results. The applications in synthetic and field tests demonstrate that PSO-BP is a fast and effective method in the inversion of 3D density interface and the optimization effect is evident compared with BP neural network merely,and thus,this method has practical value.展开更多
基金Support by National Natural Science Foundation of China(No.41274120)
文摘In the seismic profile interpretation process,as the seismic data are big and the small geological features are difficult to identify,improvement of the efficiency is needed. In this study,structure tensor method in computer image edge detection processing is applied into the 2D seismic profile. Coherent attribute is used to extract formation edge. At the same time,extracting the eigenvalues and eigenvectors to calculate the seismic geometric properties which include dip and apparent dip,automatic identification is achieved. Testing the Gaussian kernel function with synthetic models and comparing the coherent attribute and dip attribute extraction results before and after,the conclusion that Gaussian filter can remove the random noise is obtained.
基金Supported by the National Natural Science Foundation of China(No.41274120)
文摘Demigration refers to directly applying a specific imaging technique to a migrated section. It is applied primarily to seismic data mapping. In a previous research study,a time-efficient implementation technology of demigration was expounded. In the present study,the Fast Marching Method( FMM) used for traveltime computation in the isochrone-stack demigration,is developed. Furthermore,other key techniques( such as selection of aperture and antialiasing filtering factor) are analyzed in detail. Besides,the detail implementation method and program flow are given,which is shown their good computational efficiency and high-quality demigration effect. This implementation technique is illustrated with both the V( z) model and Marmousi model. It provides a basic method for implementing demigration in the application of seismic data mapping.
文摘Shallow gas is composed of all kinds of shallow buried natural gas resources( < 1500 m) with relatively small reserve for each gas resource. It has some advantages such as shallow burial depth,good physical properties and the huge accumulations. Based on the Wigner-Vill distribution,a general spectral decomposition method is applied in the shallow gas detection. Cone-shaped kernel function filtering method is used to suppress cross-terms of the Wigner-Ville distribution,which is tested on field seismic data. Because of shallow gas reservoir has a characteristic that low frequency energy is stronger and high frequency energy is weaker,it indicates the presence of shallow gas successfully.
文摘Most fault-block reservoirs in Xinmu oilfield belong to heterogeneous sandstone in characters which has low permeability, and reservoir pollution is a common phenomenon in this area. Acidizing deplugging in oil wells has become one of the major measures to improve production efficiency in the field. A compound deplugging technology in high efficiency low corrosion is developed for this kind of low permeability sandstone reservoir. On the basis of profoundly understanding of the reservoir's physical properties and sensitivity, along with comprehensive analysis of the cause for jams in oil wells, a series of experiments are carried out in order to investigate the dissolution reaction among samples and deplugging inhibitor, sample dissolving speed, formation fluid compatibility, reduction of secondary pollution, etc. Considered reservoir condition in nearby wells the optimized compositional deplugging liquid formula is selected for this reservoir. It is featured by reducing the deplugging reaction speed, extending solution for processing radius, preventing secondary damage in dissolution processing, and removing plug pollution effectively. To implement this high efficiency low corrosion deplugging measure based on reservoir condition in the borehole and nearby wells, a relatively better result of deplugging and production increasing is achieved, which enriches the measures to increase production in Xinmu oilfield, and this method can be applied to other similar oilfields for the purpose of maintaining the crude oil production and providing assistant for increasing the production significantly.
基金This work was supported by the National Nature Science Foundation of China(Grant Nos.42177139 and 41941017)the Natural Science Foundation Project of Jilin Province,China(Grant No.20230101088JC).The authors would like to thank the anonymous reviewers for their comments and suggestions.
文摘The aperture of natural rock fractures significantly affects the deformation and strength properties of rock masses,as well as the hydrodynamic properties of fractured rock masses.The conventional measurement methods are inadequate for collecting data on high-steep rock slopes in complex mountainous regions.This study establishes a high-resolution three-dimensional model of a rock slope using unmanned aerial vehicle(UAV)multi-angle nap-of-the-object photogrammetry to obtain edge feature points of fractures.Fracture opening morphology is characterized using coordinate projection and transformation.Fracture central axis is determined using vertical measuring lines,allowing for the interpretation of aperture of adaptive fracture shape.The feasibility and reliability of the new method are verified at a construction site of a railway in southeast Tibet,China.The study shows that the fracture aperture has a significant interval effect and size effect.The optimal sampling length for fractures is approximately 0.5e1 m,and the optimal aperture interpretation results can be achieved when the measuring line spacing is 1%of the sampling length.Tensile fractures in the study area generally have larger apertures than shear fractures,and their tendency to increase with slope height is also greater than that of shear fractures.The aperture of tensile fractures is generally positively correlated with their trace length,while the correlation between the aperture of shear fractures and their trace length appears to be weak.Fractures of different orientations exhibit certain differences in their distribution of aperture,but generally follow the forms of normal,log-normal,and gamma distributions.This study provides essential data support for rock and slope stability evaluation,which is of significant practical importance.
基金The project was supported by the National Natural Science Foundation of China(Grant No.42204122).
文摘There are abundant igneous gas reservoirs in the South China Sea with significant value of research,and lithology classification,mineral analysis and porosity inversion are important links in reservoir evaluation.However,affected by the diverse lithology,complicated mineral and widespread alteration,conventional logging lithology classification and mineral inversion become considerably difficult.At the same time,owing to the limitation of the wireline log response equation,the quantity and accuracy of minerals can hardly meet the exploration requirements of igneous formations.To overcome those issues,this study takes the South China Sea as an example,and combines multi-scale data such as micro rock slices,petrophysical experiments,wireline log and element cutting log to establish a set of joint inversion methods for minerals and porosity of altered igneous rocks.Specifically,we define the lithology and mineral characteristics through core slices and mineral data,and establish an igneous multi-mineral volumetric model.Then we determine element cutting log correction method based on core element data,and combine wireline log and corrected element cutting log to perform the lithology classification and joint inversion of minerals and porosity.However,it is always difficult to determine the elemental eigenvalues of different minerals in inversion.This paper uses multiple linear regression methods to solve this problem.Finally,an integrated inversion technique for altered igneous formations was developed.The results show that the corrected element cutting log are in good agreement with the core element data,and the mineral and porosity results obtained from the joint inversion based on the wireline log and corrected element cutting log are also in good agreement with the core data from X-ray diffraction.The results demonstrate that the inversion technique is applicable and this study provides a new direction for the mineral inversion research of altered igneous formations.
基金supported by the open fund from the Key Laboratory of Deep-Earth Dynamics of Ministry of Natural Resources,Institute of Geology,Chinese Academy of Geological Sciences (Number J1901-16)the project of graduate education and teaching reform in Shanxi Province (Award Number 2021YJJG147)+3 种基金the teaching reform project ‘‘Geographic Modeling,Simulation and Visualization’’ established by Shanxi Normal University (Number 2019JGXM-39)‘‘The Research Start-up Fund of Shanxi Normal University for Dr. Peng Chong in 2016’’(Number0505/02070438)‘‘The Research Start-up Fund of Shanxi Normal University for Dr. Liu Haiyan in 2017’’(Number 0505/02070458)‘‘The Research Fund for Outstanding Doctor in 2017’’(Number0503/02010168)。
文摘The Trans-North China Orogen is a major Neoarchean Paleoproterozoic collisional orogenic belt above the North China Craton, formed due to prolonged and complex processes. Even though many NeoarcheanPaleoproterozoic magmatic and metamorphic activities have been reported, due to the Huozhou Complex’s small outcropping range, little attention has been paid to the origin of various igneous rocks of the Huozhou Complex in the center of the Trans-North China Orogen. The Huozhou Complex, located south of the Luè liang, Wutai, and Hengshan complexes, is an important window into the Early Precambrian structure and evolution of the North China Craton. Its magma and metamorphism are crucial to understanding the development of the structural evolution of the Trans-North China Orogen. The Huozhou metamorphic complex area exposes a range of Precambrian metamorphic rocks, among which the most extensively dispersed is felsic biotite plagioclase gneiss. In this study comprehensive geological field survey, micropetrology,chronology, geochemistry, and Hf isotope analysis were carried out for the Qinggangping and Anziping gneiss in the north of the Huozhou Complex. The results show that the magmatic zircon age of the Qinggangping gneiss is2196 ± 14 Ma, and its protolith is I-type granite, formed by partial melting of igneous rocks in the absence of weathering. Its source is mainly the juvenile crust from depleted mantle dating 2431–2719 Ma, with a small amount of mantle-derived material. The Anziping gneiss has a metamorphic zircon age of 1931 ± 13 Ma with an S-type granite protolith belonging to peraluminous granite.The Anziping gneiss is formed by recycling pre-existing crustal components at 2613–2848 Ma. A minor quantity of mantle-derived magma is also introduced to the crust simultaneously. The samples of Qinggangping gneiss and Anziping gneiss show the characteristics of obvious negative Nb, Ti, and P elements in the spider diagram of primitive mantle standardization. This implies that the rocks have the characteristics of magmatic rocks in an island arc or subduction environment, which could have formed in the tectonic environment of the continental margin arc.
基金Under the auspices of National Key R&D Program of China(No.2021YFD1500104-4)National Natural Science Foundation of China(No.42171407,42077242)+1 种基金Natural Science Foundation of Jilin Province(No.20210101098JC)Special Investigation on Basic Science and Technology Resources(No.2021FY100406)。
文摘Cultivated land is an important natural resource to ensure food,ecological and economic security.The cultivated land quality evaluation(CQE)is greatly significant for protecting and managing cultivated land.In this study,320 counties in the black soil region of Northeast China(BSRNC)represent the research units used to construct the CQE system measuring the soil properties(SP),cultivated land productivity(CLP),ecological environment(EE)and social economy(SE).The total of 19 factors were selected to calculate the integrated fertility index(IFI)and divided into grades.Simultaneously,we used the coupling coordination degree model to comprehensively analyze the spatial pattern of the cultivated land quality(CLQ)in the BSRNC,and use the structural equation model(SEM)to analyze the driving mechanism.The results show the following:1)The CLQ of 262 counties in the BSRNC is in a state of coupling and coordination,and the coupling and coordination degree presents a spatial distribution pattern of‘high in the southwest and northeast,low in the northwest and southeast’.The coordinated development degree of 271 counties is between 0.4 and 0.6,which is in a transitional state between coordination and disorder.2)The CLQ in the BSRNC is generally good,with an average grade of 3.High-quality cultivated land accounts for 58.45%of all counties,middle-and upper-quality cultivated land accounts for 27.05%,and poor-quality cultivated land accounts for 14.49%.3)The SEM analysis shows that the SP,CLP,EE,and SE all influence the CLQ.Among them,the SP has the largest driving force on the CLQ,while the SE has the smallest driving force on it.The results confirm that the main factors affecting the evaluation results are crop productivity level,normalized difference vegetation index,ratio vegetation index,difference vegetation index,and organic carbon content.When implementing protection measures in counties with a low CLQ,considering a balanced coordination of multiple systems and reasonably controlling the quality degradation are important.This study provides the current situation and driving factors of the CLQ in the BSRNC and will play an important role in black soil governance and utilization.
文摘Clastic rock reservoir is the main reservoir type in the oil and gas field.Archie formula or various conductive models developed on the basis of Archie’s formula are usually used to interpret this kind of reservoir,and the three-water model is widely used as well.However,there are many parameters in the threewater model,and some of them are difficult to determine.Most of the determination methods are based on the statistics of large amount of experimental data.In this study,the authors determine the value of the parameters of the new three-water model based on the nuclear magnetic data and the genetic optimization algorithm.The relative error between the resistivity calculated based on these parameters and the resistivity measured experimentally at 100%water content is 0.9024.The method studied in this paper can be easily applied without much experimental data.It can provide reference for other regions to determine the parameters of the new three-water model.
文摘The hidden water-bearing structures near the roadway tunnelling face are very likely to cause water seepage accidents in coal mines.Currently,transient electromagnetic(EM)technology has be-come an important method to detect water damage in advance of roadway excavation.In this paper,the time-domain finite element algorithm based on unstructured tetrahedron grids is used to accurate-ly simulate the geological body in front of the roadway excavation face and analyze its response.The authors detect the distance between the roadway excavation face and the low-resistivity water-bearing body,the resistivity difference between the low-resistivity body and surrounding rock,and the influence of the size of the low-resistivity body on the transient EM response.Furthermore,the common types of low-resistivity bodies in the roadway drivage process are used for modeling to analyze the attenuation of the detected EM response when there are low-resistivity bodies in front of the roadway.The research in this paper can help effectively detecting the water-bearing low-resistivity body in front of the roadway drivage and lay a foundation for reducing the risk of water seepage accidents.
基金Supported by Project of the National Natural Science Foundation of China (No. 42072323)
文摘Altered igneous reservoirs have low porosity and permeability,compact structure and certain heterogeneity.A simple digital core with certain generality and multi-parameter constraints can be con-structed to characterize the microscopic pore structure and mineral composition.In this paper,based on core X-ray,CT images and whole-rock mineral analysis,threshold segmentation of mass content and grayscale distribution of various minerals in different lithologies of igneous rocks in the buried hill of Huizhou depression is carried out to construct digital core of altered igneous rocks.The results show that after converting the mineral mass content into volume content,the minerals of altered igneous rocks in Huizhou depression can be classified into components.According to the range of grayscale value,components can be divided into six parts.Due to the difference of the content of components in different lithologies of igneous rocks,differentiated grayscale threshold segmentation is needed to obtain the digital core for a single lithology.The final digital core generation process includes two steps:building a single component digital core,and stacking and combining.This kind of universal digital core model can support the subsequent pore scale numerical simulation and comprehensive rock physics research.
基金Supported by projects of National Natural Science Foundation of China(Nos.42171407,42077242)Natural Science Foundation of Jilin Province(No.20210101098JC)+1 种基金Open Fund of Key Laboratory of Urban Land Resources Monitoring and Simulation,MNR(No.KF-2020-05-024)National Key R&D Program of China(No.2021YFD1500100).
文摘Highly accurate vegetative type distribution information is of great significance for forestry resource monitoring and management.In order to improve the classification accuracy of forest types,Sentinel-1 and 2 data of Changbai Mountain protection development zone were selected,and combined with DEM to construct a multi-featured random forest type classification model incorporating fusing intensity,texture,spectral,vegetation index and topography information and using random forest Gini index(GI)for optimization.The overall accuracy of classification was 94.60%and the Kappa coefficient was 0.933.Comparing the classification results before and after feature optimization,it shows that feature optimization has a greater impact on the classification accuracy.Comparing the classification results of random forest,maximum likelihood method and CART decision tree under the same conditions,it shows that the random forest has a higher performance and can be applied to forestry research work such as forest resource survey and monitoring.
基金financially supported by the National Natural Science Foundation of China(No.41774125)Key Program of National Natural Science Foundation of China(No.41530320)+1 种基金the Key National Research Project of China(Nos.2016YFC0303100 and 2017YFC0601900)the Strategic Priority Research Program of Chinese Academy of Sciences Pilot Special(No.XDA 14020102)
基金supported by the National Natural Science Foundation of China under Grants U1262208the National Natural Science Foundation of China under Grants 41404090
文摘Kerogen content and kerogen porosity play a significant role in elastic properties of organic-rich shales.We construct a rock physics model for organic-rich shales to quantify the effect of kerogen content and kerogen porosity using the Kuster and Toksoz theory and the selfconsistent approximation method.Rock physics modeling results show that with the increase of kerogen content and kerogen-related porosity,the velocity and density of shales decrease,and the effect of kerogen porosity becomes more obvious only for higher kerogen content.We also find that the Poisson's ratio of the shale is not sensitive to kerogen porosity for the case of gas saturation.Finally,for the seismic reflection responses of an organic-rich shale layer,forward modeling results indicate the fifth type AVO responses which correspond to a negative intercept and a positive gradient.The absolute values of intercept and gradient increase with kerogen content and kerogen porosity,and present predictable variations associated with velocities and density.
文摘Temperature curves reflect geothermal gradients and local temperature anomalies, thus providing a new understanding of the underground reservoir conditions. When encountering caverns or fractures and fissures during drilling, lost circulation may occur and result in a change to the original formation temperature field, and in severe cases, even the conventional open hole well logging data cannot be obtained. This paper uses finite element analysis software COMSOL to establish a heat transfer model for the wellbore/reservoir formation system during drilling and shut-in in the presence of lost circulation, and a case study is made in a carbonate reservoir in the Tahe oilfield. On the basis of the above, we analyze the temperature distribution in the leakage zone, and the studies have shown that the leakage and petrophysical properties have an impact on the temperature of the wellbore and formation, hence we can estimate the reservoir permeability using the temperature data. In addition, the determination of the temperature recovery time after some drilling fluids have leaked into the formation will help in recognizing the subsurface temperature field of the carbonate formation correctly, thus enhancing production logging interpretation accuracy and improving the understanding of later measurements.
基金the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDA14020102)the National Natural Science Foundation of China(Nos.41774125,41530320,41904104)+1 种基金the Key National Research Project of China(No.2018YFC0603300)the S&T Program of Beijing(No.Z181100005718001).
文摘We propose a new 3D inversion scheme to invert the near-and transition-zone data of CSAMT with topography accurately.In this new method,the earth was discretized into unstructured tetrahedra to fit the ragged topography and the vector fi nite-element method was adopted to obtain precise responses and good sensitivity.To simulate the attitude and shape of the transmitter,we divided a long-grounded transmitter into dipoles and integrated these dipoles to obtain good responses in the near-and transition-fi eld zones.Next,we designed an L2 norm-based objective functional and applied a standard quasi-Newton method as the optimization method to solve the inverse problem and guarantee steady convergence.We tested our 3D inversion method first on synthetic data and then on a field dataset acquired from select sites near Changbai Mountain,China.In both tests,the new inversion algorithm achieved excellent fitting between the predicted and observed data,even in near-and transition-fi eld zones,and the inversion results agreed well with the true model.These fi ndings reveal that the proposed algorithm is eff ective for 3D inversion of CSAMT data.
基金Under the auspices the Fundamental Research Funds for the Central Universities,China(No.2017TD-26)the Plan for Changbai Mountain Scholars of Jilin Province,China(No.JJLZ[2015]54)
文摘The Multi-angle imaging spectroradiometer(MISR) land-surface(LS) bidirectional reflectance factor(BRF) product(MILS_BRF) has unique semi-simultaneous multi-angle sampling and global coverage. However, unlike on-satellite observations, the spatio-temporal characteristics of MILS_BRF data have rarely been explicitly and comprehensively analysed. Results from 5-yr(2011–2015) of MILS_BRF dataset from a typical region in central Northeast Asia as the study area showed that the monthly area coverage as well as MILS_BRF data quantity varies significantly, from the highest in October(99.05%) through median in June/July(78.09%/75.21%) to lowest in January(18.97%), and a large data-vacant area exists in the study area during four consecutive winter months(December through March). The data-vacant area is mainly composed of crop lands and cropland/natural vegetation mosaic. The amount of data within the principal plane(PP)±30°(nPP) or cross PP ±30°(nCP), varies intra-annually with significant differences from different view zeniths or forward/backward scattering directions. For example, multiple off-nadir cameras have nPP but no nCP data for up to six months(September through February), with the opposite occurring in June and July. This study provides explicit and comprehensive information about the spatio-temporal characteristics of product coverage and observation geometry of MILS_BRF in the study area. Results provide required user reference information for MILS_BRF to evaluate performance of BRDF models or to compare with other satellite-derived BRF or albedo products. Comparing this final product to on-satellite observations, what was found here reveals a new perspective on product spatial coverage and observation geometry for multi-angle remote sensing.
基金granted by Land Resources Evolution Mechanism and Sustainable Use in Global Black Soil Critical Zone(IGCP 665)Geochemical Survey of Land Quality in 1:25 Northeast China Black Soil(Grant No.DD20160316).
文摘1 Introduction Vegetation indices(VIs)derived from satellite observations are an essential source of information for operational monitoring of the Earth’s vegetation(Qu et al.,2018;Yan et al.,2008).However,soil background dramatically affects the performances ofⅥs(Baret and Guyot,1991;Gilabert et al.,2002;Huete,1988;Qi et al,1994).
基金Supported by National High-tech Research&Development Program of China(863 Project)(No.2014AA06A613)
文摘BP( Back Propagation) neural network and PSO( Particle Swarm Optimization) are two main heuristic optimization methods,and are usually used as nonlinear inversion methods in geophysics. The authors applied BP neural network and BP neural network optimized with PSO into the inversion of 3D density interface respectively,and a comparison was drawn to demonstrate the inversion results. To start with,a synthetic density interface model was created and we used the proceeding inversion methods to test their effectiveness. And then two methods were applied into the inversion of the depth of Moho interface. According to the results,it is clear to find that the application effect of PSO-BP is better than that of BP network. The BP network structures used in both synthetic and field data are consistent in order to obtain preferable inversion results. The applications in synthetic and field tests demonstrate that PSO-BP is a fast and effective method in the inversion of 3D density interface and the optimization effect is evident compared with BP neural network merely,and thus,this method has practical value.
