Manual investigation of chest radiography(CXR)images by physicians is crucial for effective decision-making in COVID-19 diagnosis.However,the high demand during the pandemic necessitates auxiliary help through image a...Manual investigation of chest radiography(CXR)images by physicians is crucial for effective decision-making in COVID-19 diagnosis.However,the high demand during the pandemic necessitates auxiliary help through image analysis and machine learning techniques.This study presents a multi-threshold-based segmentation technique to probe high pixel intensity regions in CXR images of various pathologies,including normal cases.Texture information is extracted using gray co-occurrence matrix(GLCM)-based features,while vessel-like features are obtained using Frangi,Sato,and Meijering filters.Machine learning models employing Decision Tree(DT)and RandomForest(RF)approaches are designed to categorize CXR images into common lung infections,lung opacity(LO),COVID-19,and viral pneumonia(VP).The results demonstrate that the fusion of texture and vesselbased features provides an effective ML model for aiding diagnosis.The ML model validation using performance measures,including an accuracy of approximately 91.8%with an RF-based classifier,supports the usefulness of the feature set and classifier model in categorizing the four different pathologies.Furthermore,the study investigates the importance of the devised features in identifying the underlying pathology and incorporates histogrambased analysis.This analysis reveals varying natural pixel distributions in CXR images belonging to the normal,COVID-19,LO,and VP groups,motivating the incorporation of additional features such as mean,standard deviation,skewness,and percentile based on the filtered images.Notably,the study achieves a considerable improvement in categorizing COVID-19 from LO,with a true positive rate of 97%,further substantiating the effectiveness of the methodology implemented.展开更多
This manuscript explores the behavior of a junctionless tri-gate FinFET at the nano-scale region using SiGe material for the channel.For the analysis,three different channel structures are used:(a)tri-layer stack chan...This manuscript explores the behavior of a junctionless tri-gate FinFET at the nano-scale region using SiGe material for the channel.For the analysis,three different channel structures are used:(a)tri-layer stack channel(TLSC)(Si-SiGe-Si),(b)double layer stack channel(DLSC)(SiGe-Si),(c)single layer channel(SLC)(S_(i)).The I−V characteristics,subthreshold swing(SS),drain-induced barrier lowering(DIBL),threshold voltage(V_(t)),drain current(ION),OFF current(IOFF),and ON-OFF current ratio(ION/IOFF)are observed for the structures at a 20 nm gate length.It is seen that TLSC provides 21.3%and 14.3%more ON current than DLSC and SLC,respectively.The paper also explores the analog and RF factors such as input transconductance(g_(m)),output transconductance(gds),gain(gm/gds),transconductance generation factor(TGF),cut-off frequency(f_(T)),maximum oscillation frequency(f_(max)),gain frequency product(GFP)and linearity performance parameters such as second and third-order harmonics(g_(m2),g_(m3)),voltage intercept points(VIP_(2),VIP_(3))and 1-dB compression points for the three structures.The results show that the TLSC has a high analog performance due to more gm and provides 16.3%,48.4%more gain than SLC and DLSC,respectively and it also provides better linearity.All the results are obtained using the VisualTCAD tool.展开更多
At 12.8 MHz center frequency,the advanced miniaturized polymer-based planar high quality factor(Q)passive elements embedded bandpassfilter works in the L-band.Because most of the demands operate inside the spectrum,the...At 12.8 MHz center frequency,the advanced miniaturized polymer-based planar high quality factor(Q)passive elements embedded bandpassfilter works in the L-band.Because most of the demands operate inside the spectrum,the wideband or high-speed operation necessary to enhance must be acquired in microwave frequency ranges.The channel has a quiet,high-performance micro-filter with wideband rejection.Capacitors and inductors are used in the high quality factor(Q)passive components,and related networks are incorporated in thefilter.Embedded layers are concatenated using Three-Dimensional Integrated Circuit(3D-IC)integration,parasitics are removed,and interconnection losses are negotiated using de-embedding methods.A wireless application-based Liquid Crystalline Polymer(LCP)viewpoint is employed as a substrate material in this work.The polymer processes,their properties,and the incorporated high-Q Band Pass Filter Framework.The suggestedfilter model is computed and manufactured utilizing the L-band frequency spectrum,decreasing total physical length by 31%while increasing bandwidth by 45%.展开更多
Interference is a key factor in radar return misdetection.Strong interference might make it difficult to detect the signal or targets.When interference occurs in the sidelobes of the antenna pattern,Sidelobe Cancellat...Interference is a key factor in radar return misdetection.Strong interference might make it difficult to detect the signal or targets.When interference occurs in the sidelobes of the antenna pattern,Sidelobe Cancellation(SLC)and Sidelobe Blanking are two unique solutions to solve this problem(SLB).Aside from this approach,the probability of false alert and likelihood of detection are the most essential parameters in radar.The chance of a false alarm for any radar system should be minimal,and as a result,the probability of detection should be high.There are several interference cancellation strategies in the literature that are used to sustain consistent false alarms regardless of the clutter environment.With the necessity for interference cancellation methods and the constant false alarm rate(CFAR),the Maisel SLC algorithm has been modified to create a new algorithm for recognizing targets in the presence of severe interference.The received radar returns and interference are simulated as non-stationary in this approach,and side-lobe interference is cancelled using an adaptive algorithm.By comparing the performance of adaptive algorithms,simulation results are shown.In a severe clutter situation,the simulation results demonstrate a considerable increase in target recognition and signal to noise ratio when compared to the previous technique.展开更多
In recent years,there has been a rapid growth in Underwater Wireless Sensor Networks(UWSNs).The focus of research in this area is now on solving the problems associated with large-scale UWSN.One of the major issues in...In recent years,there has been a rapid growth in Underwater Wireless Sensor Networks(UWSNs).The focus of research in this area is now on solving the problems associated with large-scale UWSN.One of the major issues in such a network is the localization of underwater nodes.Localization is required for tracking objects and detecting the target.It is also considered tagging of data where sensed contents are not found of any use without localization.This is useless for application until the position of sensed content is confirmed.This article’s major goal is to review and analyze underwater node localization to solve the localization issues in UWSN.The present paper describes various existing localization schemes and broadly categorizes these schemes as Centralized and Distributed localization schemes underwater.Also,a detailed subdivision of these localization schemes is given.Further,these localization schemes are compared from different perspectives.The detailed analysis of these schemes in terms of certain performance metrics has been discussed in this paper.At the end,the paper addresses several future directions for potential research in improving localization problems of UWSN.展开更多
In the field of robotics to enhance the interaction with humans in real-time and in the bioengineering field to develop prosthetic devices, the need for artificial skin is in high demand. In this work, the hydrogen-bo...In the field of robotics to enhance the interaction with humans in real-time and in the bioengineering field to develop prosthetic devices, the need for artificial skin is in high demand. In this work, the hydrogen-bonded complex network structure of the Pectin/PEG composite has been designed, resulting in the free-standing film functioning as a temperature-sensing device. With the gelation technique and the addition of PEG, the film’s flexibility and conductivity were enhanced. The fabricated device worked at a low voltage of 1 V supply with high throughput. With different dimensions, three devices were fabricated, and the maximum-induced ionic current was 34 µA ± 5%. The device has an average sensitivity of 1.3–2.7 µA/°C over the range of 30 °C to 42 °C. The device's fastest response time to sense the temperature change was 2 s ± 5%. The present device exhibits good stability for a long duration of time. These pectin/PEG films can be used as biomimetic skin to improve the efficiency in sensing the temperature.展开更多
The demand for the exploration of ocean resources is increasing exponentially.Underwater image data plays a significant role in many research areas.Despite this,the visual quality of underwater images is degraded beca...The demand for the exploration of ocean resources is increasing exponentially.Underwater image data plays a significant role in many research areas.Despite this,the visual quality of underwater images is degraded because of two main factors namely,backscattering and attenuation.Therefore,visual enhancement has become an essential process to recover the required data from the images.Many algorithms had been proposed in a decade for improving the quality of images.This paper aims to propose a single image enhancement technique without the use of any external datasets.For that,the degraded images are subjected to two main processes namely,color correction and image fusion.Initially,veiling light and transmission light is estimated tofind the color required for correction.Veiling light refers to unwanted light,whereas transmission light refers to the required light for color correction.These estimated outputs are applied in the scene recovery equation.The image obtained from color correction is subjected to a fusion process where the image is categorized into two versions and applied to white balance and contrast enhancement techniques.The resultants are divided into three weight maps namely,luminance,saliency,chromaticity and fused using the Laplacian pyramid.The results obtained are graphically compared with their input data using RGB Histogram plot.Finally,image quality is measured and tabulated using underwater image quality measures.展开更多
Frequency selective surfaces(FSSs)play an important role in wireless systems as these can be used as filters,in isolating the unwanted radiation,in microstrip patch antennas for improving the performance of these ante...Frequency selective surfaces(FSSs)play an important role in wireless systems as these can be used as filters,in isolating the unwanted radiation,in microstrip patch antennas for improving the performance of these antennas and in other 5G applications.The analysis and design of the double concentric ring frequency selective surface(DCRFSS)is presented in this research.In the sub-6 GHz 5G FR1 spectrum,a computational synthesis technique for creating DCRFSS based spatial filters is proposed.The analytical tools presented in this study can be used to gain a better understanding of filtering processes and for constructing the spatial filters.Variation of the loop sizes,angles of incidence,and polarization of the concentric rings are the factors which influence the transmission coefficient as per the thorough investigation performed in this paper.A novel synthesis approach based on mathematical equations that may be used to determine the physical parameters ofDCRFSSbased spatial filters is presented.The proposed synthesis technique is validated by comparing results from high frequency structure simulator(HFSS),Ansys electronic desktop circuit editor,and an experimental setup.Furthermore,the findings acquired from a unit cell are expanded to a 2×2 array,which shows identical performance and therefore proves its stability.展开更多
The fundamental advantages of carbon-based graphene material,such as its high tunnelling probability,symmetric band structure(linear dependence of the energy band on the wave direction),low effective mass,and characte...The fundamental advantages of carbon-based graphene material,such as its high tunnelling probability,symmetric band structure(linear dependence of the energy band on the wave direction),low effective mass,and characteristics of its 2D atomic layers,are the main focus of this research work.The impact of channel thickness,gate under-lap,asymmetric source/drain doping method,workfunction of gate contact,and High-K material on Graphene-based Tunnel Field Effect Transistor(TFET)is analyzed with 20 nm technology.Physical modelling and electrical characteristic performance have been simulated using the Atlas device simulator of SILVACO TCAD with user-defined material syntax for the newly included graphene material in comparison to silicon carbide(SiC).The simulation results in significant suppression of ambipolar current to voltage characteristics of TFET and modelled device exhibits a significant improvement in subthreshold swing(0.0159 V/decade),the ratio of Ion/Ioff(1000),and threshold voltage(-0.2 V with highly doped p-type source and 0.2 V with highly doped n-type drain)with power supply of 0.5 V,which make it useful for low power digital applications.展开更多
In recent years,computer visionfinds wide applications in maritime surveillance with its sophisticated algorithms and advanced architecture.Auto-matic ship detection with computer vision techniques provide an efficien...In recent years,computer visionfinds wide applications in maritime surveillance with its sophisticated algorithms and advanced architecture.Auto-matic ship detection with computer vision techniques provide an efficient means to monitor as well as track ships in water bodies.Waterways being an important medium of transport require continuous monitoring for protection of national security.The remote sensing satellite images of ships in harbours and water bodies are the image data that aid the neural network models to localize ships and to facilitate early identification of possible threats at sea.This paper proposes a deep learning based model capable enough to classify between ships and no-ships as well as to localize ships in the original images using bounding box tech-nique.Furthermore,classified ships are again segmented with deep learning based auto-encoder model.The proposed model,in terms of classification,provides suc-cessful results generating 99.5%and 99.2%validation and training accuracy respectively.The auto-encoder model also produces 85.1%and 84.2%validation and training accuracies.Moreover the IoU metric of the segmented images is found to be of 0.77 value.The experimental results reveal that the model is accu-rate and can be implemented for automatic ship detection in water bodies consid-ering remote sensing satellite images as input to the computer vision system.展开更多
There are numerous goals in next-generation cellular networks(5G),which is expected to be available soon.They want to increase data rates,reduce end-to-end latencies,and improve end-user service quality.Modern network...There are numerous goals in next-generation cellular networks(5G),which is expected to be available soon.They want to increase data rates,reduce end-to-end latencies,and improve end-user service quality.Modern networks need to change because there has been a significant rise in the number of base stations required to meet these needs and put the operators’low-cost constraints to the test.Because it can withstand interference from other wireless networks,and Adaptive Complex Multicarrier Modulation(ACMM)system is being looked at as a possible choice for the 5th Generation(5G)of wireless networks.Many arithmetic units need to be used on the hardware side of multicarrier systems to do the pulse-shaping filters and inverse FFT.The main goal of this study is to adapt complex multicarrier modulation(ACMM)for baseband transmission with low complexity and the ability to change it.We found that this is the first recon-figurable architecture that lets you choose how many subcarriers a subband has while still having the same amount of hardware resources as before.Also,under the new design with a single selection line,it selects from a set of filters.The baseband modulating signal is evaluated and tested using a Field-Programmable Gate Array(FPGA)device.This device is available from a commercial source.New technology outperforms current technology in terms of computational com-plexity,simple design,and ease of implementation.Additionally,it has a higher power spectrum density,spectral efficiency,a lower bit error rate,and a higher peak to average power ratio than existing technology.展开更多
Queuing models are used to assess the functionality and aesthetics of SCADA systems for supervisory control and data collection.Here,the main emphasis is on how the queuing theory can be used in the system’s design a...Queuing models are used to assess the functionality and aesthetics of SCADA systems for supervisory control and data collection.Here,the main emphasis is on how the queuing theory can be used in the system’s design and analysis.The analysis’s findings indicate that by using queuing models,cost-performance ratios close to the ideal might be attained.This article discusses a novel methodology for evaluating the service-oriented survivability of SCADA systems.In order to evaluate the state of service performance and the system’s overall resilience,the framework applies queuing theory to an analytical model.As a result,the SCADA process is translated using the M^(X)/G/1 queuing model,and the queueing theory is used to evaluate this design’s strategy.The supplemental variable technique solves the queuing problem that comes with the subsequent results.The queue size,server idle time,utilization,and probabilistic generating factors of the distinct operating strategies are estimated.Notable examples were examined via numerical analysis using mathematical software.Because it is used frequently and uses a statistical demarcation method,this tactic is completely acceptable.The graphical representation of this perspective offers a thorough analysis of the alleged limits.展开更多
A four-element compact dual-band patch antenna having a common ground plane operating at 28/38 GHz is proposed formillimeter-wave communication systems in this paper.Themultiple-input-multiple-output(MIMO)antenna geom...A four-element compact dual-band patch antenna having a common ground plane operating at 28/38 GHz is proposed formillimeter-wave communication systems in this paper.Themultiple-input-multiple-output(MIMO)antenna geometry consists of a slotted ellipse enclosed within a hollow circle which is orthogonally rotated with a connected partial ground at the back.The overall size of the four elements MIMO antenna is 2.24λ×2.24λ(at 27.12GHz).The prototype of four-element MIMOresonator is designed and printed using Rogers RTDuroid 5880 withε_(r)=2.2 and loss tangent=0.0009 and having a thickness of 0.8 mm.It covers dual-band having a fractional bandwidth of 15.7%(27.12-31.34 GHz)and 4.2%(37.21-38.81 GHz)for millimeter-wave applications with a gain of more than 4 dBi at both bands.The proposed antenna analysis in terms ofMIMOdiversity parameters(Envelope Correlation Coefficient(ECC)and Diversity Gain(DG))is also carried out.The experimental result in terms of reflection coefficient,radiation pattern,gain and MIMOdiversity parameter correlates very well with the simulated ones that show the potential of the proposed design for MIMO applications at millimeter-wave frequencies.展开更多
In this research, we carried out the modeling of the ball and beam system (BBS) within the MATLAB/Simulink framework by applying both proportional-integral-derivative (PID) and fuzzy logic control strategies to govern...In this research, we carried out the modeling of the ball and beam system (BBS) within the MATLAB/Simulink framework by applying both proportional-integral-derivative (PID) and fuzzy logic control strategies to govern the dynamics of this constructed model. The underlying non-linear dynamic equations adjusting the behavior of the BBS system are based on Newton’s second law of motion. The physical installation of the BBS, designed for potential real-time application, comprises a lengthy beam subject to movement through the action of a DC servomotor, with a ball traversing the beam in a reciprocating manner. A distance sensor is strategically placed in front of the beam to determine the exact position of the ball. In this system, an electrical control signal applied to the DC servomotor causes the beam to pivot about its horizontal axis, thereby enabling the ball to move freely along the beam's length. To avoid the risk of losing the ball equilibrium on the beam and to achieve precise system control, a mathematical model was devised and implemented within the MATLAB/Simulink environment. The use of the particle swarm optimization (PSO) algorithm was aimed at tackling the task of refining and optimizing the PID controller specifically designed for the linearized ball and beam control system. The presented system is controlled using both PID and fuzzy logic, and the use of the PSO algorithm enhances the system’s responsiveness efficiency.展开更多
In the recent past power line communication has emerged as an attractive choice for high speed data transfer and is looked upon as inexpensive and reliable media suitable for broadband internet access, home and office...In the recent past power line communication has emerged as an attractive choice for high speed data transfer and is looked upon as inexpensive and reliable media suitable for broadband internet access, home and office automation, in-vehicle data communication etc. In this paper we present an architecture for the physical layer of a PLC transceiver based on Orthogonal Frequency Division Multiplexing (OFDM) and the impact on multipath distortion for PLC transmission in terms of bit error rate. Since there is no standard PLC channel model available, a widely accepted multipath channel model is used for simulation purpose. Simulation results as well as FPGA synthesis verify the effectiveness of the proposed architecture for PLC modem design at 110 Mbps data rate.展开更多
BACKGROUND Diabetes,a globally escalating health concern,necessitates innovative solutions for efficient detection and management.Blood glucose control is an essential aspect of managing diabetes and finding the most ...BACKGROUND Diabetes,a globally escalating health concern,necessitates innovative solutions for efficient detection and management.Blood glucose control is an essential aspect of managing diabetes and finding the most effective ways to control it.The latest findings suggest that a basal insulin administration rate and a single,highconcentration injection before a meal may not be sufficient to maintain healthy blood glucose levels.While the basal insulin rate treatment can stabilize blood glucose levels over the long term,it may not be enough to bring the levels below the post-meal limit after 60 min.The short-term impacts of meals can be greatly reduced by high-concentration injections,which can help stabilize blood glucose levels.Unfortunately,they cannot provide long-term stability to satisfy the postmeal or pre-meal restrictions.However,proportional-integral-derivative(PID)control with basal dose maintains the blood glucose levels within the range for a longer period.AIM To develop a closed-loop electronic system to pump required insulin into the patient's body automatically in synchronization with glucose sensor readings.METHODS The proposed system integrates a glucose sensor,decision unit,and pumping module to specifically address the pumping of insulin and enhance system effectiveness.Serving as the intelligence hub,the decision unit analyzes data from the glucose sensor to determine the optimal insulin dosage,guided by a pre-existing glucose and insulin level table.The artificial intelligence detection block processes this information,providing decision instructions to the pumping module.Equipped with communication antennas,the glucose sensor and micropump operate in a feedback loop,creating a closed-loop system that eliminates the need for manual intervention.RESULTS The incorporation of a PID controller to assess and regulate blood glucose and insulin levels in individuals with diabetes introduces a sophisticated and dynamic element to diabetes management.The simulation not only allows visualization of how the body responds to different inputs but also offers a valuable tool for predicting and testing the effects of various interventions over time.The PID controller's role in adjusting insulin dosage based on the discrepancy between desired setpoints and actual measurements showcases a proactive strategy for maintaining blood glucose levels within a healthy range.This dynamic feedback loop not only delays the onset of steady-state conditions but also effectively counteracts post-meal spikes in blood glucose.CONCLUSION The WiFi-controlled voltage controller and the PID controller simulation collectively underscore the ongoing efforts to enhance efficiency,safety,and personalized care within the realm of diabetes management.These technological advancements not only contribute to the optimization of insulin delivery systems but also have the potential to reshape our understanding of glucose and insulin dynamics,fostering a new era of precision medicine in the treatment of diabetes.展开更多
Quantum dot cellular automata(QCA)is promising nanotechnology due to the three main advantages:faster speed,nanoscale size,and ultrasmall power consumption.This paper proposed a simple data path selector cum router as...Quantum dot cellular automata(QCA)is promising nanotechnology due to the three main advantages:faster speed,nanoscale size,and ultrasmall power consumption.This paper proposed a simple data path selector cum router as the‘multiplexerchannel-demultiplexer’unit using QCA,an unavoidable building block of nano communication.A Simple 2×2 block and the extended 4×4 block of data path selectors have been proposed in this article.The layouts of the proposed designs have been verified in QCADesigner,and the energy dissipation has been evaluated using two tools,QCAPro and QCQDesigner-E(QDE).The suggested designs reached a significant improvement in cell complexity(cell count)and covered area over the existing designs.In precise,the proposed 2×2(4×4)block shows 86%(63%)lower cell complexity and 87%(37%)smaller area than the prior reported similar designs.In addition,the currently reported 2×2(4×4)unit has 86%(60%)lower QDE based energy dissipation compared with prior reported designs.展开更多
Background/Aims: Determining the levels of oral health and the quality of dental care are fundamental to building concepts of oral health. This study aims to assess toothbrushing techniques using a technical and physi...Background/Aims: Determining the levels of oral health and the quality of dental care are fundamental to building concepts of oral health. This study aims to assess toothbrushing techniques using a technical and physical model, clarifying how children and pre-adults learn to brush their teeth. Materials and Methods: Data were recorded from 23 participants, both male and female of various ages, using a proposed electronic toothbrush equipped with X-Y-Z axes pathways. The data, collected before and after training experiments, were processed with MATLAB to generate plots for the three axes. Results: The study revealed that most parameter values, such as Mean Difference Between Amplitudes (MAV, 6.00), Wilson Amplitude (WAMP, 179.419), and Average Amplitude Coupling (AAC, 1.270), decreased from before to after the experiments. Furthermore, the average overall epoch lengths (AVG) showed a 75% reduction in movement amplitude between the two experiments. Conclusion: Dentist observations indicated which brushing methods were acceptable or not. Analytical values suggest that individuals learn the toothbrushing technique effectively, and medical observations clearly demonstrate the success of the proposed method.展开更多
Currently, communication system requires multiband small antennas for 5G mobile applications. Driven this motivation, this paper proposes a multiband patch antenna for Wi-Fi, WiMAX and 5G applications. The proposed an...Currently, communication system requires multiband small antennas for 5G mobile applications. Driven this motivation, this paper proposes a multiband patch antenna for Wi-Fi, WiMAX and 5G applications. The proposed antenna can effectively operate at 2.4 GHz as Wi-Fi, 7.8 GHz as WiMAX and 33.5 GHz as 5G communication purposes. The proposed antenna arrays have given directional radiation patterns, very small voltage standing wave ratio, high gain (VSWR) and directivity for each aforementioned systems operating frequency. This antenna is made for multiband purpose which can be effective for not only Wi-Fi and WiMAX but also 5G applications.展开更多
This paper deals with the design of bidirectional coupler for broadband power line communication and the impedance matching technique with the power line. This coupler can be used for both transmitting and receiving t...This paper deals with the design of bidirectional coupler for broadband power line communication and the impedance matching technique with the power line. This coupler can be used for both transmitting and receiving the data, acting as transceiver. The impedance mismatching problem is also solved here using line trap circuit. The coupler circuit is capable of transmitting or receiving modulated signals with carrier frequency of 15 MHz which can be used for domestic as well as distribution power networks. Laboratory prototype tested using power line network consists of electrical household appliances and results show that the circuit is able to facilitate bidirectional band pass transmission.展开更多
文摘Manual investigation of chest radiography(CXR)images by physicians is crucial for effective decision-making in COVID-19 diagnosis.However,the high demand during the pandemic necessitates auxiliary help through image analysis and machine learning techniques.This study presents a multi-threshold-based segmentation technique to probe high pixel intensity regions in CXR images of various pathologies,including normal cases.Texture information is extracted using gray co-occurrence matrix(GLCM)-based features,while vessel-like features are obtained using Frangi,Sato,and Meijering filters.Machine learning models employing Decision Tree(DT)and RandomForest(RF)approaches are designed to categorize CXR images into common lung infections,lung opacity(LO),COVID-19,and viral pneumonia(VP).The results demonstrate that the fusion of texture and vesselbased features provides an effective ML model for aiding diagnosis.The ML model validation using performance measures,including an accuracy of approximately 91.8%with an RF-based classifier,supports the usefulness of the feature set and classifier model in categorizing the four different pathologies.Furthermore,the study investigates the importance of the devised features in identifying the underlying pathology and incorporates histogrambased analysis.This analysis reveals varying natural pixel distributions in CXR images belonging to the normal,COVID-19,LO,and VP groups,motivating the incorporation of additional features such as mean,standard deviation,skewness,and percentile based on the filtered images.Notably,the study achieves a considerable improvement in categorizing COVID-19 from LO,with a true positive rate of 97%,further substantiating the effectiveness of the methodology implemented.
文摘This manuscript explores the behavior of a junctionless tri-gate FinFET at the nano-scale region using SiGe material for the channel.For the analysis,three different channel structures are used:(a)tri-layer stack channel(TLSC)(Si-SiGe-Si),(b)double layer stack channel(DLSC)(SiGe-Si),(c)single layer channel(SLC)(S_(i)).The I−V characteristics,subthreshold swing(SS),drain-induced barrier lowering(DIBL),threshold voltage(V_(t)),drain current(ION),OFF current(IOFF),and ON-OFF current ratio(ION/IOFF)are observed for the structures at a 20 nm gate length.It is seen that TLSC provides 21.3%and 14.3%more ON current than DLSC and SLC,respectively.The paper also explores the analog and RF factors such as input transconductance(g_(m)),output transconductance(gds),gain(gm/gds),transconductance generation factor(TGF),cut-off frequency(f_(T)),maximum oscillation frequency(f_(max)),gain frequency product(GFP)and linearity performance parameters such as second and third-order harmonics(g_(m2),g_(m3)),voltage intercept points(VIP_(2),VIP_(3))and 1-dB compression points for the three structures.The results show that the TLSC has a high analog performance due to more gm and provides 16.3%,48.4%more gain than SLC and DLSC,respectively and it also provides better linearity.All the results are obtained using the VisualTCAD tool.
文摘At 12.8 MHz center frequency,the advanced miniaturized polymer-based planar high quality factor(Q)passive elements embedded bandpassfilter works in the L-band.Because most of the demands operate inside the spectrum,the wideband or high-speed operation necessary to enhance must be acquired in microwave frequency ranges.The channel has a quiet,high-performance micro-filter with wideband rejection.Capacitors and inductors are used in the high quality factor(Q)passive components,and related networks are incorporated in thefilter.Embedded layers are concatenated using Three-Dimensional Integrated Circuit(3D-IC)integration,parasitics are removed,and interconnection losses are negotiated using de-embedding methods.A wireless application-based Liquid Crystalline Polymer(LCP)viewpoint is employed as a substrate material in this work.The polymer processes,their properties,and the incorporated high-Q Band Pass Filter Framework.The suggestedfilter model is computed and manufactured utilizing the L-band frequency spectrum,decreasing total physical length by 31%while increasing bandwidth by 45%.
文摘Interference is a key factor in radar return misdetection.Strong interference might make it difficult to detect the signal or targets.When interference occurs in the sidelobes of the antenna pattern,Sidelobe Cancellation(SLC)and Sidelobe Blanking are two unique solutions to solve this problem(SLB).Aside from this approach,the probability of false alert and likelihood of detection are the most essential parameters in radar.The chance of a false alarm for any radar system should be minimal,and as a result,the probability of detection should be high.There are several interference cancellation strategies in the literature that are used to sustain consistent false alarms regardless of the clutter environment.With the necessity for interference cancellation methods and the constant false alarm rate(CFAR),the Maisel SLC algorithm has been modified to create a new algorithm for recognizing targets in the presence of severe interference.The received radar returns and interference are simulated as non-stationary in this approach,and side-lobe interference is cancelled using an adaptive algorithm.By comparing the performance of adaptive algorithms,simulation results are shown.In a severe clutter situation,the simulation results demonstrate a considerable increase in target recognition and signal to noise ratio when compared to the previous technique.
文摘In recent years,there has been a rapid growth in Underwater Wireless Sensor Networks(UWSNs).The focus of research in this area is now on solving the problems associated with large-scale UWSN.One of the major issues in such a network is the localization of underwater nodes.Localization is required for tracking objects and detecting the target.It is also considered tagging of data where sensed contents are not found of any use without localization.This is useless for application until the position of sensed content is confirmed.This article’s major goal is to review and analyze underwater node localization to solve the localization issues in UWSN.The present paper describes various existing localization schemes and broadly categorizes these schemes as Centralized and Distributed localization schemes underwater.Also,a detailed subdivision of these localization schemes is given.Further,these localization schemes are compared from different perspectives.The detailed analysis of these schemes in terms of certain performance metrics has been discussed in this paper.At the end,the paper addresses several future directions for potential research in improving localization problems of UWSN.
文摘In the field of robotics to enhance the interaction with humans in real-time and in the bioengineering field to develop prosthetic devices, the need for artificial skin is in high demand. In this work, the hydrogen-bonded complex network structure of the Pectin/PEG composite has been designed, resulting in the free-standing film functioning as a temperature-sensing device. With the gelation technique and the addition of PEG, the film’s flexibility and conductivity were enhanced. The fabricated device worked at a low voltage of 1 V supply with high throughput. With different dimensions, three devices were fabricated, and the maximum-induced ionic current was 34 µA ± 5%. The device has an average sensitivity of 1.3–2.7 µA/°C over the range of 30 °C to 42 °C. The device's fastest response time to sense the temperature change was 2 s ± 5%. The present device exhibits good stability for a long duration of time. These pectin/PEG films can be used as biomimetic skin to improve the efficiency in sensing the temperature.
文摘The demand for the exploration of ocean resources is increasing exponentially.Underwater image data plays a significant role in many research areas.Despite this,the visual quality of underwater images is degraded because of two main factors namely,backscattering and attenuation.Therefore,visual enhancement has become an essential process to recover the required data from the images.Many algorithms had been proposed in a decade for improving the quality of images.This paper aims to propose a single image enhancement technique without the use of any external datasets.For that,the degraded images are subjected to two main processes namely,color correction and image fusion.Initially,veiling light and transmission light is estimated tofind the color required for correction.Veiling light refers to unwanted light,whereas transmission light refers to the required light for color correction.These estimated outputs are applied in the scene recovery equation.The image obtained from color correction is subjected to a fusion process where the image is categorized into two versions and applied to white balance and contrast enhancement techniques.The resultants are divided into three weight maps namely,luminance,saliency,chromaticity and fused using the Laplacian pyramid.The results obtained are graphically compared with their input data using RGB Histogram plot.Finally,image quality is measured and tabulated using underwater image quality measures.
文摘Frequency selective surfaces(FSSs)play an important role in wireless systems as these can be used as filters,in isolating the unwanted radiation,in microstrip patch antennas for improving the performance of these antennas and in other 5G applications.The analysis and design of the double concentric ring frequency selective surface(DCRFSS)is presented in this research.In the sub-6 GHz 5G FR1 spectrum,a computational synthesis technique for creating DCRFSS based spatial filters is proposed.The analytical tools presented in this study can be used to gain a better understanding of filtering processes and for constructing the spatial filters.Variation of the loop sizes,angles of incidence,and polarization of the concentric rings are the factors which influence the transmission coefficient as per the thorough investigation performed in this paper.A novel synthesis approach based on mathematical equations that may be used to determine the physical parameters ofDCRFSSbased spatial filters is presented.The proposed synthesis technique is validated by comparing results from high frequency structure simulator(HFSS),Ansys electronic desktop circuit editor,and an experimental setup.Furthermore,the findings acquired from a unit cell are expanded to a 2×2 array,which shows identical performance and therefore proves its stability.
文摘The fundamental advantages of carbon-based graphene material,such as its high tunnelling probability,symmetric band structure(linear dependence of the energy band on the wave direction),low effective mass,and characteristics of its 2D atomic layers,are the main focus of this research work.The impact of channel thickness,gate under-lap,asymmetric source/drain doping method,workfunction of gate contact,and High-K material on Graphene-based Tunnel Field Effect Transistor(TFET)is analyzed with 20 nm technology.Physical modelling and electrical characteristic performance have been simulated using the Atlas device simulator of SILVACO TCAD with user-defined material syntax for the newly included graphene material in comparison to silicon carbide(SiC).The simulation results in significant suppression of ambipolar current to voltage characteristics of TFET and modelled device exhibits a significant improvement in subthreshold swing(0.0159 V/decade),the ratio of Ion/Ioff(1000),and threshold voltage(-0.2 V with highly doped p-type source and 0.2 V with highly doped n-type drain)with power supply of 0.5 V,which make it useful for low power digital applications.
文摘In recent years,computer visionfinds wide applications in maritime surveillance with its sophisticated algorithms and advanced architecture.Auto-matic ship detection with computer vision techniques provide an efficient means to monitor as well as track ships in water bodies.Waterways being an important medium of transport require continuous monitoring for protection of national security.The remote sensing satellite images of ships in harbours and water bodies are the image data that aid the neural network models to localize ships and to facilitate early identification of possible threats at sea.This paper proposes a deep learning based model capable enough to classify between ships and no-ships as well as to localize ships in the original images using bounding box tech-nique.Furthermore,classified ships are again segmented with deep learning based auto-encoder model.The proposed model,in terms of classification,provides suc-cessful results generating 99.5%and 99.2%validation and training accuracy respectively.The auto-encoder model also produces 85.1%and 84.2%validation and training accuracies.Moreover the IoU metric of the segmented images is found to be of 0.77 value.The experimental results reveal that the model is accu-rate and can be implemented for automatic ship detection in water bodies consid-ering remote sensing satellite images as input to the computer vision system.
文摘There are numerous goals in next-generation cellular networks(5G),which is expected to be available soon.They want to increase data rates,reduce end-to-end latencies,and improve end-user service quality.Modern networks need to change because there has been a significant rise in the number of base stations required to meet these needs and put the operators’low-cost constraints to the test.Because it can withstand interference from other wireless networks,and Adaptive Complex Multicarrier Modulation(ACMM)system is being looked at as a possible choice for the 5th Generation(5G)of wireless networks.Many arithmetic units need to be used on the hardware side of multicarrier systems to do the pulse-shaping filters and inverse FFT.The main goal of this study is to adapt complex multicarrier modulation(ACMM)for baseband transmission with low complexity and the ability to change it.We found that this is the first recon-figurable architecture that lets you choose how many subcarriers a subband has while still having the same amount of hardware resources as before.Also,under the new design with a single selection line,it selects from a set of filters.The baseband modulating signal is evaluated and tested using a Field-Programmable Gate Array(FPGA)device.This device is available from a commercial source.New technology outperforms current technology in terms of computational com-plexity,simple design,and ease of implementation.Additionally,it has a higher power spectrum density,spectral efficiency,a lower bit error rate,and a higher peak to average power ratio than existing technology.
文摘Queuing models are used to assess the functionality and aesthetics of SCADA systems for supervisory control and data collection.Here,the main emphasis is on how the queuing theory can be used in the system’s design and analysis.The analysis’s findings indicate that by using queuing models,cost-performance ratios close to the ideal might be attained.This article discusses a novel methodology for evaluating the service-oriented survivability of SCADA systems.In order to evaluate the state of service performance and the system’s overall resilience,the framework applies queuing theory to an analytical model.As a result,the SCADA process is translated using the M^(X)/G/1 queuing model,and the queueing theory is used to evaluate this design’s strategy.The supplemental variable technique solves the queuing problem that comes with the subsequent results.The queue size,server idle time,utilization,and probabilistic generating factors of the distinct operating strategies are estimated.Notable examples were examined via numerical analysis using mathematical software.Because it is used frequently and uses a statistical demarcation method,this tactic is completely acceptable.The graphical representation of this perspective offers a thorough analysis of the alleged limits.
基金This work is supported by the Moore4Medical Project,funded within ECSEL JU in collaboration with the EU H2020 Framework Programme(H2020/2014-2020)under Grant Agreement H2020-ECSEL-2019-IA-876190Fundacao para a Ciência eTecnologia(ECSEL/0006/2019)This work is also funded by the FCT/MEC through national funds and when applicable co-financed by the ERDF,under the PT2020 Partnership Agreement under the UID/EEA/50008/2020 Project.
文摘A four-element compact dual-band patch antenna having a common ground plane operating at 28/38 GHz is proposed formillimeter-wave communication systems in this paper.Themultiple-input-multiple-output(MIMO)antenna geometry consists of a slotted ellipse enclosed within a hollow circle which is orthogonally rotated with a connected partial ground at the back.The overall size of the four elements MIMO antenna is 2.24λ×2.24λ(at 27.12GHz).The prototype of four-element MIMOresonator is designed and printed using Rogers RTDuroid 5880 withε_(r)=2.2 and loss tangent=0.0009 and having a thickness of 0.8 mm.It covers dual-band having a fractional bandwidth of 15.7%(27.12-31.34 GHz)and 4.2%(37.21-38.81 GHz)for millimeter-wave applications with a gain of more than 4 dBi at both bands.The proposed antenna analysis in terms ofMIMOdiversity parameters(Envelope Correlation Coefficient(ECC)and Diversity Gain(DG))is also carried out.The experimental result in terms of reflection coefficient,radiation pattern,gain and MIMOdiversity parameter correlates very well with the simulated ones that show the potential of the proposed design for MIMO applications at millimeter-wave frequencies.
文摘In this research, we carried out the modeling of the ball and beam system (BBS) within the MATLAB/Simulink framework by applying both proportional-integral-derivative (PID) and fuzzy logic control strategies to govern the dynamics of this constructed model. The underlying non-linear dynamic equations adjusting the behavior of the BBS system are based on Newton’s second law of motion. The physical installation of the BBS, designed for potential real-time application, comprises a lengthy beam subject to movement through the action of a DC servomotor, with a ball traversing the beam in a reciprocating manner. A distance sensor is strategically placed in front of the beam to determine the exact position of the ball. In this system, an electrical control signal applied to the DC servomotor causes the beam to pivot about its horizontal axis, thereby enabling the ball to move freely along the beam's length. To avoid the risk of losing the ball equilibrium on the beam and to achieve precise system control, a mathematical model was devised and implemented within the MATLAB/Simulink environment. The use of the particle swarm optimization (PSO) algorithm was aimed at tackling the task of refining and optimizing the PID controller specifically designed for the linearized ball and beam control system. The presented system is controlled using both PID and fuzzy logic, and the use of the PSO algorithm enhances the system’s responsiveness efficiency.
文摘In the recent past power line communication has emerged as an attractive choice for high speed data transfer and is looked upon as inexpensive and reliable media suitable for broadband internet access, home and office automation, in-vehicle data communication etc. In this paper we present an architecture for the physical layer of a PLC transceiver based on Orthogonal Frequency Division Multiplexing (OFDM) and the impact on multipath distortion for PLC transmission in terms of bit error rate. Since there is no standard PLC channel model available, a widely accepted multipath channel model is used for simulation purpose. Simulation results as well as FPGA synthesis verify the effectiveness of the proposed architecture for PLC modem design at 110 Mbps data rate.
文摘BACKGROUND Diabetes,a globally escalating health concern,necessitates innovative solutions for efficient detection and management.Blood glucose control is an essential aspect of managing diabetes and finding the most effective ways to control it.The latest findings suggest that a basal insulin administration rate and a single,highconcentration injection before a meal may not be sufficient to maintain healthy blood glucose levels.While the basal insulin rate treatment can stabilize blood glucose levels over the long term,it may not be enough to bring the levels below the post-meal limit after 60 min.The short-term impacts of meals can be greatly reduced by high-concentration injections,which can help stabilize blood glucose levels.Unfortunately,they cannot provide long-term stability to satisfy the postmeal or pre-meal restrictions.However,proportional-integral-derivative(PID)control with basal dose maintains the blood glucose levels within the range for a longer period.AIM To develop a closed-loop electronic system to pump required insulin into the patient's body automatically in synchronization with glucose sensor readings.METHODS The proposed system integrates a glucose sensor,decision unit,and pumping module to specifically address the pumping of insulin and enhance system effectiveness.Serving as the intelligence hub,the decision unit analyzes data from the glucose sensor to determine the optimal insulin dosage,guided by a pre-existing glucose and insulin level table.The artificial intelligence detection block processes this information,providing decision instructions to the pumping module.Equipped with communication antennas,the glucose sensor and micropump operate in a feedback loop,creating a closed-loop system that eliminates the need for manual intervention.RESULTS The incorporation of a PID controller to assess and regulate blood glucose and insulin levels in individuals with diabetes introduces a sophisticated and dynamic element to diabetes management.The simulation not only allows visualization of how the body responds to different inputs but also offers a valuable tool for predicting and testing the effects of various interventions over time.The PID controller's role in adjusting insulin dosage based on the discrepancy between desired setpoints and actual measurements showcases a proactive strategy for maintaining blood glucose levels within a healthy range.This dynamic feedback loop not only delays the onset of steady-state conditions but also effectively counteracts post-meal spikes in blood glucose.CONCLUSION The WiFi-controlled voltage controller and the PID controller simulation collectively underscore the ongoing efforts to enhance efficiency,safety,and personalized care within the realm of diabetes management.These technological advancements not only contribute to the optimization of insulin delivery systems but also have the potential to reshape our understanding of glucose and insulin dynamics,fostering a new era of precision medicine in the treatment of diabetes.
文摘Quantum dot cellular automata(QCA)is promising nanotechnology due to the three main advantages:faster speed,nanoscale size,and ultrasmall power consumption.This paper proposed a simple data path selector cum router as the‘multiplexerchannel-demultiplexer’unit using QCA,an unavoidable building block of nano communication.A Simple 2×2 block and the extended 4×4 block of data path selectors have been proposed in this article.The layouts of the proposed designs have been verified in QCADesigner,and the energy dissipation has been evaluated using two tools,QCAPro and QCQDesigner-E(QDE).The suggested designs reached a significant improvement in cell complexity(cell count)and covered area over the existing designs.In precise,the proposed 2×2(4×4)block shows 86%(63%)lower cell complexity and 87%(37%)smaller area than the prior reported similar designs.In addition,the currently reported 2×2(4×4)unit has 86%(60%)lower QDE based energy dissipation compared with prior reported designs.
文摘Background/Aims: Determining the levels of oral health and the quality of dental care are fundamental to building concepts of oral health. This study aims to assess toothbrushing techniques using a technical and physical model, clarifying how children and pre-adults learn to brush their teeth. Materials and Methods: Data were recorded from 23 participants, both male and female of various ages, using a proposed electronic toothbrush equipped with X-Y-Z axes pathways. The data, collected before and after training experiments, were processed with MATLAB to generate plots for the three axes. Results: The study revealed that most parameter values, such as Mean Difference Between Amplitudes (MAV, 6.00), Wilson Amplitude (WAMP, 179.419), and Average Amplitude Coupling (AAC, 1.270), decreased from before to after the experiments. Furthermore, the average overall epoch lengths (AVG) showed a 75% reduction in movement amplitude between the two experiments. Conclusion: Dentist observations indicated which brushing methods were acceptable or not. Analytical values suggest that individuals learn the toothbrushing technique effectively, and medical observations clearly demonstrate the success of the proposed method.
文摘Currently, communication system requires multiband small antennas for 5G mobile applications. Driven this motivation, this paper proposes a multiband patch antenna for Wi-Fi, WiMAX and 5G applications. The proposed antenna can effectively operate at 2.4 GHz as Wi-Fi, 7.8 GHz as WiMAX and 33.5 GHz as 5G communication purposes. The proposed antenna arrays have given directional radiation patterns, very small voltage standing wave ratio, high gain (VSWR) and directivity for each aforementioned systems operating frequency. This antenna is made for multiband purpose which can be effective for not only Wi-Fi and WiMAX but also 5G applications.
文摘This paper deals with the design of bidirectional coupler for broadband power line communication and the impedance matching technique with the power line. This coupler can be used for both transmitting and receiving the data, acting as transceiver. The impedance mismatching problem is also solved here using line trap circuit. The coupler circuit is capable of transmitting or receiving modulated signals with carrier frequency of 15 MHz which can be used for domestic as well as distribution power networks. Laboratory prototype tested using power line network consists of electrical household appliances and results show that the circuit is able to facilitate bidirectional band pass transmission.
