A proper control and management of dust dispersion is essential to ensure safe and productive underground working environment. Brattice installation to direct the flow from main shaft to the mining face was found to b...A proper control and management of dust dispersion is essential to ensure safe and productive underground working environment. Brattice installation to direct the flow from main shaft to the mining face was found to be the most effective method to disperse dust particle away from the mining face. However,it limits the movement and disturbs the flexibility of the mining fleets and operators at the tunnel. This study proposes a hybrid brattice system- a combination of a physical brattice together with suitable and flexible directed and located air curtains- to mitigate dust dispersion from the mining face and reduce dust concentration to a safe level for the working operators. A validated three-dimensional computational fluid dynamic model utilizing Eulerian–Lagrangian approach is employed to track the dispersion of dust particle. Several possible hybrid brattice scenarios are evaluated with the objective to improve dust management in underground mine. The results suggest that implementation of hybrid brattice is beneficial for the mining operation: up to three times lower dust concentration is achieved as compared to that of the physical brattice without air curtain.展开更多
In underground coal mines, uncontrolled accumulation of methane and fine coal dust often leads to serious incidents such as explosion. Therefore, methane and dust dispersion in underground mines is closely monitored a...In underground coal mines, uncontrolled accumulation of methane and fine coal dust often leads to serious incidents such as explosion. Therefore, methane and dust dispersion in underground mines is closely monitored and strictly regulated. Accordingly, significant efforts have been devoted to study methane and dust dispersion in underground mines. In this study, methane emission and dust concentration are numerically investigated using a computational fluid dynamics(CFD) approach. Various possible scenarios of underground mine configurations are evaluated. The results indicate that the presence of continuous miner adversely affects the air flow and leads to increased methane and dust concentrations.Nevertheless, it is found that such negative effect can be minimized or even neutralized by operating the scrubber fan in suction mode. In addition, it was found that the combination of scrubber fan in suction mode and brattice results in the best performance in terms of methane and dust removal from the mining face.展开更多
This article introduces a novel approach for tricone bit wear condition monitoring and failure prediction for surface mining applications.A successful bit health monitoring system is essential to achieve fully autonom...This article introduces a novel approach for tricone bit wear condition monitoring and failure prediction for surface mining applications.A successful bit health monitoring system is essential to achieve fully autonomous blasthole drilling.In this research in-situ vibration signals were analyzed in timefrequency domain and signals trend during tricone bit life span were investigated and introduced to support the development of artificial intelligence(AI)models.In addition to the signal statistical features,wavelet packet energy distribution proved to be a powerful indicator for bit wear assessment.Backpropagation artificial neural network(ANN)models were designed,trained and evaluated for bit state classification.Finally,an ANN architecture and feature vector were introduced to classify the bit condition and predict the bit failure.展开更多
This study aims to investigate the benefcial efects of surface retaining elements (SREs) on the mechanical behaviors of bolted rock and roadway stability. 3D printing (3DP) technology is utilized to create rock analog...This study aims to investigate the benefcial efects of surface retaining elements (SREs) on the mechanical behaviors of bolted rock and roadway stability. 3D printing (3DP) technology is utilized to create rock analogue prismatic specimens for conducting this investigation. Uniaxial compression tests with acoustic emission (AE) and digital image correlation techniques have been conducted on 3DP specimens bolted with diferent SREs. The results demonstrate that the strength and modulus of elasticity of the bolted specimens show a positive correlation with the area of the SRE;the AE characteristics of the bolted specimens are higher than those of the unbolted specimen, but they decrease with an increase in SRE area, thus further improving the integrity of the bolted specimens. The reinforcement efect of SREs on the surrounding rock of roadways is further analyzed using numerical modelling and feld test. The results provide a better understanding of the role of SREs in rock bolting and the optimization of rock bolting design. Furthermore, they verify the feasibility of 3DP for rock analogues in rock mechanics tests.展开更多
Despite the extensive studies conducted on the effectiveness of microwave treatment as a novel rock preconditioning method,there is yet to find reliable data on the rock failure mechanisms due to microwave heating.In ...Despite the extensive studies conducted on the effectiveness of microwave treatment as a novel rock preconditioning method,there is yet to find reliable data on the rock failure mechanisms due to microwave heating.In addition,there is no significant discussion on the energy efficiency of the method as one of the important factors among the mining and geotechnical engineers in the industry.This study presents a novel experimental method to evaluate two main rock failure mechanisms due to microwave treatment without applying any mechanical forces,i.e.distributed and concentrated heating.The result shows that the existence of a small and concentrated fraction of a strong microwave absorbing mineral will change the failure mechanism from the distributed heating to the concentrated heating,which can increase the weakening over microwave efficiency(WOME)by more than 10 folds.This observation is further investigated using the developed coupled numerical model.It is shown that at the same input energy,the existence of microwave absorbing minerals can cause major heat concentration inside the rock and increase the maximum temperature by up to three times.展开更多
Repair welding of AA 6082-T6 joints was carried out using ER 4043 filler through the TIG welding process with or without pulsed current.Microstructure and mechanical characteristics of the joints before and after repa...Repair welding of AA 6082-T6 joints was carried out using ER 4043 filler through the TIG welding process with or without pulsed current.Microstructure and mechanical characteristics of the joints before and after repairing were investigated by examining macrostructure,microstructure,and distributions of porosity in the weld metal(WM),and by hardness,tensile,and bending tests.We observed that the welding current,phase transformations in heat-affected zone(HAZ)and porosity introduced in the WM during welding influence on its mechanical properties in sequence.The experimental results showed that the bead width and penetration as well as size of pores in the joints were mainly influenced by the welding currents.The sound joints were obtained at a welding current of 140 A with or without pulsed current when welding speed and gas flow rate were set at 20 cm·min-1 and 15 L·min-1,respectively.Among them,the decrease in mechanical properties of repair weld(RW)was directly related to the phase transformations in the over-ageing zone due to the double welding thermal cycles and elevated distribution of porosity in the WM.In addition,it was observed that the comparatively smaller grain size and lower porosity in WM of the RW produced by pulsed TIG welding gave a positive effect on its mechanical properties.展开更多
Induced seismicity is strongly related to various engineering projects that cause anthropogenic in-situ stress change at a great depth.Hence,there is a need to estimate and mitigate the associated risks.In the past,va...Induced seismicity is strongly related to various engineering projects that cause anthropogenic in-situ stress change at a great depth.Hence,there is a need to estimate and mitigate the associated risks.In the past,various simulation methods have been developed and applied to induced seismicity analysis,but there is still a fundamental diference between simulation results and feld observations in terms of the spatial distribution of seismic events and its frequency.The present study aims to develop a method to simulate spatially distributed on-fault seismicity whilst reproducing a complex stress state in the fault zone.Hence,an equivalent continuum model is constructed,based on a discrete fracture network within a fault damage zone,by employing the crack tensor theory.A fault core is simulated at the center of the model as a discontinuous plane.Using the model,a heterogeneous stress state with stress anomalies in the fault zone is frst simulated by applying tractions on the model outer boundaries.Subsequently,the efective normal stress on the fault plane is decreased in a stepwise manner to induce slip.The simulation result is validated in terms of the b-value and other seismic source parameters,hence demonstrating that the model can reproduce spatially and temporally distributed on-fault seismicity.Further analysis on the parameters shows the variation of frequency-magnitude distribution before the occurrence of large seismic events.This variation is found to be consistent with feld observations,thus suggesting the potential use of this simulation method in evaluating the risk for seismic hazards in various engineering projects.展开更多
The customarily discarded exhaust from the fossil fuel-based power plants of the off-grid mines holds the thermal potential to fulfill the heating requirement of the underground operation.This present research fills i...The customarily discarded exhaust from the fossil fuel-based power plants of the off-grid mines holds the thermal potential to fulfill the heating requirement of the underground operation.This present research fills in an important research gap by investigating the coupling effect between a diesel exhaust heat recovery and an intake air heating system employed in a remote mine.An integrative approach comprising analytical,numerical,and experimental assessment has been adapted.The novel analytical model developed here establishes the reliability of the proposed mine heating system by providing comparative analysis between a coupled and a decoupled system.The effect of working fluid variation has been examined by the numerical analysis and the possible improvement has been identified.Experimental investigations present a demonstration of the successful lab-scale implementation of the concept and validate the numerical and analytical models developed.Successful deployment of the fully coupled mine heating system proposed here will assist the mining industry on its journey towards energy-efficient,and sustainable mining practices through nearly 70%reduction in fossil fuel consumption for heating intentions.展开更多
Presence of fine dust in air causes serious health hazard for mine operators resulting in such serious problems as coal workers’pneumoconiosis and silicosis.Major sources of dust appear of course along the mining fac...Presence of fine dust in air causes serious health hazard for mine operators resulting in such serious problems as coal workers’pneumoconiosis and silicosis.Major sources of dust appear of course along the mining face where the minerals are extracted.Proper control and management are required to ensure safe working environment in the mine.Here,we utilize the computational fluid dynamic(CFD)approach to evaluate various methods used for mitigating dust dispersion from the mining face and for ensuring safe level of dust concentration in the mine tunnel for safety of the operators.The methods used include:application of blowing and exhaust fans,application of brattice and combination of both.The results suggest that among the examined methods,implementation of appropriately located brattice to direct the flow from the main shaft to the mining face is the most effective method to direct dust particles away from the mining face.展开更多
An approach which combines particle swarm optimization and support vector machine(PSO–SVM)is proposed to forecast large-scale goaf instability(LSGI).Firstly,influencing factors of goaf safety are analyzed,and followi...An approach which combines particle swarm optimization and support vector machine(PSO–SVM)is proposed to forecast large-scale goaf instability(LSGI).Firstly,influencing factors of goaf safety are analyzed,and following parameters were selected as evaluation indexes in the LSGI:uniaxial compressive strength(UCS)of rock,elastic modulus(E)of rock,rock quality designation(RQD),area ration of pillar(Sp),the ratio of width to height of the pillar(w/h),depth of ore body(H),volume of goaf(V),dip of ore body(a)and area of goaf(Sg).Then LSGI forecasting model by PSO-SVM was established according to the influencing factors.The performance of hybrid model(PSO+SVM=PSO–SVM)has been compared with the grid search method of support vector machine(GSM–SVM)model.The actual data of 40 goafs are applied to research the forecasting ability of the proposed method,and two cases of underground mine are also validated by the proposed model.The results indicated that the heuristic algorithm of PSO can speed up the SVM parameter optimization search,and the predictive ability of the PSO–SVM model with the RBF kernel function is acceptable and robust,which might hold a high potential to become a useful tool in goaf risky prediction research.展开更多
This paper aims to improve the accuracy and applicability of gas diffusion mathematical models from coal particles. Firstly, a new constitutive model for gas diffusion from coal particles with tri-disperse pore struct...This paper aims to improve the accuracy and applicability of gas diffusion mathematical models from coal particles. Firstly, a new constitutive model for gas diffusion from coal particles with tri-disperse pore structure is constructed by considering the difference in characteristics between soft coal and hard coal.The analytical solution is then derived, that is, the quantitative relationship between gas diffusion rate(Qt/Q_∞) and diffusion time(t), The pore structure parameters of soft coal and hard coal from Juji coal mine are determined. Gas diffusion rules are numerically calculated and investigated by physical simulation methods. Lastly, the applicability of this model is verified. The results show that the homogeneous model only applies to the gas diffusion process of hard coal during the initial 10 min. The calculation results from this model and the physical experimental results of soft coal and hard coal are nearly identical during the initial 30 min.展开更多
Froth flotation is a widely used process of particle separation exploiting differences in surface properties. It is important to point out that overall flotation performance(grade and recovery) is a consequence of the...Froth flotation is a widely used process of particle separation exploiting differences in surface properties. It is important to point out that overall flotation performance(grade and recovery) is a consequence of the quality and quantity of the solid particles collected from the pulp phase, transported into the froth phase, and surviving as bubble-particle aggregates into the overflow. This work will focus on studying these phenomena and will incorporate the effects of particle hydrophobicities in the 3-phase system. Solids are classed as either hydrophilic non-sulphide gangue(e.g. silica, talc), hydrophilic sulphide(e.g. pyrite), or hydrophobic sulphide(e.g. sphalerite). Talc is a surface-active species of gangue that has been shown to behave differently from silica(frother adsorbs on the surface of talc particles). Both are common components of ores and will be studied in detail. The focus of this work is to investigate the role of solids on pulp hydrodynamics, froth bubble coalescence intensity, water overflow rate with solids present, and in particular, the interactions between solids, frother and gas on the gas dispersion parameters. The results show that in the pulp zone there is no effect of solids on bubble size and gas holdup; in the froth zone, although hydrophilic particles solely do not effect on the water overflow rate, hydrophobic particles produce higher intensity of rates on water overflow and bubble coalescence, and many be attributed to the water reattachment.展开更多
Several rheocasting processes are developed or applied worldwide in the metal forming industry.One of the new rheocasting processes is the gas induced semi-solid(GISS) process.The GISS process utilizes the principle o...Several rheocasting processes are developed or applied worldwide in the metal forming industry.One of the new rheocasting processes is the gas induced semi-solid(GISS) process.The GISS process utilizes the principle of rapid heat extraction and vigorous local extraction using the injection of fine gas bubbles through a graphite diffuser.Several forming processes such as die casting,squeeze casting,gravity casting,and rheo-extrusion of the semi-solid slurries prepared by the GISS process have also been conducted.The GISS process is capable of processing various alloys including cast aluminum alloys,die casting aluminum alloys,wrought aluminum alloys,and zinc alloys.The GISS process is currently developed to be used commercially in the industry with the focus on forming semi-solid slurries containing low fractions solid(< 0.25) into parts.The research and development activities of the GISS process were discussed and the status of the industrial developments of this process was reported.展开更多
The production cycle of open-cast coal mines generally in eludes drilling, blasting, loading, hauling and coal preparation activities. Individual optimization of these activities does not mean that the whole system is...The production cycle of open-cast coal mines generally in eludes drilling, blasting, loading, hauling and coal preparation activities. Individual optimization of these activities does not mean that the whole system is optimized. This paper proposes a cost model considering all activities in mining cycle and system-wide approach to minimize the total mining cost of bench production. Since the fragmentation size and blast-hole diameter are linked to all activities of mining system, they are considered as decision variables in the problem form ul at io n. The operatio n costs are then minimized by using the evolutionary algorithm. Moreover, the impact of the change in the explosive price, and the hourly unit cost of equipment on total mining cost is quantified by sensitivity analysis. A case study is implemented to demonstrate the developed model.展开更多
The size of bubbles created in the flotation process is of great importance to the efficiency of the mineral separation achieved.Meanwhile,it is believed that frother transport between phases is perhaps the most impor...The size of bubbles created in the flotation process is of great importance to the efficiency of the mineral separation achieved.Meanwhile,it is believed that frother transport between phases is perhaps the most important reason for the interactive nature of the phenomena occurring in the bulk and froth phases in flotation,as frother adsorbed in the surface of rising bubbles is removed from the bulk phase and then released into the froth as a fraction of the bubbles burst.This causes the increased concentration in the froth compared to the bulk concentration,named as frother partitioning.Partitioning reflects the adsorption of frother on bubbles and how to influence bubble size is not known.There currently exists no such a topic aiming to link these two key parameters.To fill this vacancy,the correspondence between bubble size and frother partitioning was examined.Bubble size was measured by sampling-for-imaging(SFI)technique.Using total organic carbon(TOC)analysis to measure the frother partitioning between froth and bulk phases was determined.Measurements have shown,with no exceptions including four different frothers,higher frother concentration is in the bulk than in the froth.The results also show strong partitioning giving an increase in bubble size which implies there is a compelling relationship between these two,represented by CFroth/CBulk and D32.The CFroth/CBulkand D32 curves show similar exponential decay relationships as a function of added frother in the system,strongly suggesting that the frother concentration gradient between the bulk solution and the bubble interface is the driving force contributing to bubble size reduction.展开更多
Coal seam gas content is frequently measured in quantity during underground coal mining operation and coalbed methane(CBM)exploration as a significant basic parameter.Due to the calculation error of lost gas and resid...Coal seam gas content is frequently measured in quantity during underground coal mining operation and coalbed methane(CBM)exploration as a significant basic parameter.Due to the calculation error of lost gas and residual gas in the direct method,the efficiency and accuracy of the current methods are not inadequate to the large area multi-point measurement of coal seam gas content.This paper firstly deduces a simplified theoretical dynamic model for calculating lost gas based on gas dynamic diffusion theory.Secondly,the effects of various factors on gas dynamic diffusion from coal particle are experimentally studied.And sampling procedure of representative coal particle is improved.Thirdly,a new estimation method of residual gas content based on excess adsorption and competitive adsorption theory is proposed.The results showed that the maximum error of calculating the losing gas content by using the new simplified model is only 4%.Considering the influence of particle size on gas diffusion law,the particle size of the collected coal sample is below 0.25 mm,which improves the measurement speed and reflects the safety representativeness of the sample.The determination time of gas content reduced from 36 to 3 h/piece.Moreover,the absolute error is 0.15–0.50 m^3/t,and the relative error is within 5%.A new engineering method for determining the coal seam gas content is developed according to the above research.展开更多
The paper presents the influence of varying immediate roof thickness on the lower strong roof strata movement and failure pattern in longwall coal mining with large mining height. The investigation is based on 58 geol...The paper presents the influence of varying immediate roof thickness on the lower strong roof strata movement and failure pattern in longwall coal mining with large mining height. The investigation is based on 58 geological drill holes and hydraulic shield pressure measurements around the longwall Panel 42105 of the Buertai Mine in Inner Mongolia Autonomous Region, China. The longwall Panel 42105 is characterized by relatively soft immediate roof strata of varying thickness superposed by strong strata,herein defined as lower strong roof. A voussoir beam model is adopted to interpret the structural movement of the lower strong roof strata and shield pressure measurements. It is shown that when the immediate roof is relatively thick, the broken overlying lower strong roof tends to form a stable voussoir beam with previously broken layer, thus not exerting high pressure on the hydraulic shield and working face. When the immediate roof is relatively thin, the broken overlying lower strong roof tends to behave as a cantilever beam, thus exerting higher pressure on the hydraulic shield and working face. Comparison of model predictions with measured time-weighted average shield pressure(TWAP) shows good agreement.展开更多
This study is a part of an overall research project on the effects of microwave(MW)irradiation on rocks for assisted rock breaking systems as well as mineral processing at McGill University.For the first time,this pap...This study is a part of an overall research project on the effects of microwave(MW)irradiation on rocks for assisted rock breaking systems as well as mineral processing at McGill University.For the first time,this paper highlights a comprehensive investigation on the effects of microwave irradiation on Canadian kimberlites.Potential contribution to the continuous rock excavation and rock weakening effect prior to implementation of mechanical techniques was explored.Two different kimberlite rocks,i.e.volcaniclastic kimberlite(VK)and hypabyssal kimberlite(HK),and granite samples were studied.Some important physical properties of the rock samples were measured including rock quality designation(RQD),specific gravity,porosity,and specific heat capacity.Rock samples were treated for various exposure times using a multi-mode MWunit at different power levels ranging from 2 kW to 15 kW.The effect of MW irradiation on rock samples was investigated.The results indicate that the mechanical properties including unconfined compressive strength(UCS)and Brazilian tensile strength(BTS)were significantly dropped as a result of MWirradiation.Finally,the effect on rock abrasivity using the Cerchar abrasivity index(CAI)has also been discussed.展开更多
Owing to safety issue and low energy density of liquid lithium-ion batteries(LIBs),all-solid-state lithium metal batteries(ASLMBs)with unique all-solid-state electrolytes(SEs)have attracted wide attentions.This arises...Owing to safety issue and low energy density of liquid lithium-ion batteries(LIBs),all-solid-state lithium metal batteries(ASLMBs)with unique all-solid-state electrolytes(SEs)have attracted wide attentions.This arises mainly from the advantages of the SEs in the suppression of lithium dendrite growth,long cycle life,and broad working temperature range,showing huge potential applications in electronic devices,electric vehicles,smart grids,and biomedical devices.However,SEs suffer from low lithiumion conductivity and low mechanical integrity,slowing down the development of practical ASLMBs.Nanostructure engineering is of great efficiency in tuning the structure and composition of the SEs with improved lithium-ion conductivity and mechanical integrity.Among various available technologies for nanostructure engineering,electrospinning is a promising technique because of its simple operation,cost-effectiveness,and efficient integration with different components.In this review,we will first give a simple description of the electrospinning process.Then,the use of electrospinning technique in the synthesis of various SEs is summarized,for example,organic nanofibrous matrix,organic/inorganic nanofibrous matrix,and inorganic nanofibrous matrix combined with other components.The current development of the advanced architectures of SEs through electrospinning technology is also presented to provide references and ideas for designing high-performance ASLMBs.Finally,an outlook and further challenges in the preparation of advanced SEs for ASLMBs through electrospinning engineering are given.展开更多
7XXX series aluminium alloys generally present low weldability by fusion welding methods because of the sensitivity to weld solidification cracking, vaporization of strengthening alloys and other defects in the fusion...7XXX series aluminium alloys generally present low weldability by fusion welding methods because of the sensitivity to weld solidification cracking, vaporization of strengthening alloys and other defects in the fusion zone. Friction stir welding(FSW) can be deployed successfully with aluminium alloys. We presented the effect of post-weld heat treatment(PWHT) on the microstructure and mechanical properties of SSM7075 joints. Semi solid plates were butt-welded by FSW at a rotation speed of 1110 r/min, welding speeds of 70 and 110 mm/min. Solution treatment, artificial aging, and T6(solution treatment and artificial aging combined) were applied to the welded joints, each with three samples. It was found that the T6 joints at the speed of 70 mm/min yielded the highest tensile strength of 459.23 MPa. This condition best enhanced the mechanical properties of FSW SSM7075 aluminium alloy joints.展开更多
基金financially supported by the Singapore Economic Development Board(EDB)through the Minerals Metals and Materials Technology Centre(M3TC)Research Grant R-261-501-013-414
文摘A proper control and management of dust dispersion is essential to ensure safe and productive underground working environment. Brattice installation to direct the flow from main shaft to the mining face was found to be the most effective method to disperse dust particle away from the mining face. However,it limits the movement and disturbs the flexibility of the mining fleets and operators at the tunnel. This study proposes a hybrid brattice system- a combination of a physical brattice together with suitable and flexible directed and located air curtains- to mitigate dust dispersion from the mining face and reduce dust concentration to a safe level for the working operators. A validated three-dimensional computational fluid dynamic model utilizing Eulerian–Lagrangian approach is employed to track the dispersion of dust particle. Several possible hybrid brattice scenarios are evaluated with the objective to improve dust management in underground mine. The results suggest that implementation of hybrid brattice is beneficial for the mining operation: up to three times lower dust concentration is achieved as compared to that of the physical brattice without air curtain.
基金financial support from McGill University-Canada and NSERC-Discovery Grant RGPIN-2015-03945
文摘In underground coal mines, uncontrolled accumulation of methane and fine coal dust often leads to serious incidents such as explosion. Therefore, methane and dust dispersion in underground mines is closely monitored and strictly regulated. Accordingly, significant efforts have been devoted to study methane and dust dispersion in underground mines. In this study, methane emission and dust concentration are numerically investigated using a computational fluid dynamics(CFD) approach. Various possible scenarios of underground mine configurations are evaluated. The results indicate that the presence of continuous miner adversely affects the air flow and leads to increased methane and dust concentrations.Nevertheless, it is found that such negative effect can be minimized or even neutralized by operating the scrubber fan in suction mode. In addition, it was found that the combination of scrubber fan in suction mode and brattice results in the best performance in terms of methane and dust removal from the mining face.
基金The authors appreciate generous supports from Canada Natural Sciences and Engineering Research Council,McGill University Engine Centre as well as Faculty of Engineering.
文摘This article introduces a novel approach for tricone bit wear condition monitoring and failure prediction for surface mining applications.A successful bit health monitoring system is essential to achieve fully autonomous blasthole drilling.In this research in-situ vibration signals were analyzed in timefrequency domain and signals trend during tricone bit life span were investigated and introduced to support the development of artificial intelligence(AI)models.In addition to the signal statistical features,wavelet packet energy distribution proved to be a powerful indicator for bit wear assessment.Backpropagation artificial neural network(ANN)models were designed,trained and evaluated for bit state classification.Finally,an ANN architecture and feature vector were introduced to classify the bit condition and predict the bit failure.
基金supported by the Young Scientist Project of National Key Research and Development Program of China(2021YFC2900600)the National Natural Science Foundation of China(52074166)Shandong Province(ZR2021YQ38).
文摘This study aims to investigate the benefcial efects of surface retaining elements (SREs) on the mechanical behaviors of bolted rock and roadway stability. 3D printing (3DP) technology is utilized to create rock analogue prismatic specimens for conducting this investigation. Uniaxial compression tests with acoustic emission (AE) and digital image correlation techniques have been conducted on 3DP specimens bolted with diferent SREs. The results demonstrate that the strength and modulus of elasticity of the bolted specimens show a positive correlation with the area of the SRE;the AE characteristics of the bolted specimens are higher than those of the unbolted specimen, but they decrease with an increase in SRE area, thus further improving the integrity of the bolted specimens. The reinforcement efect of SREs on the surrounding rock of roadways is further analyzed using numerical modelling and feld test. The results provide a better understanding of the role of SREs in rock bolting and the optimization of rock bolting design. Furthermore, they verify the feasibility of 3DP for rock analogues in rock mechanics tests.
基金The authors extend their appreciation to the Deputyship for Research&Innovation,Ministry of Education in Saudi Arabia,for funding this research work through the project number(IFPRC036-135-2020)and King Abdulaziz University,DSR,Jeddah,Saudi Arabia.
文摘Despite the extensive studies conducted on the effectiveness of microwave treatment as a novel rock preconditioning method,there is yet to find reliable data on the rock failure mechanisms due to microwave heating.In addition,there is no significant discussion on the energy efficiency of the method as one of the important factors among the mining and geotechnical engineers in the industry.This study presents a novel experimental method to evaluate two main rock failure mechanisms due to microwave treatment without applying any mechanical forces,i.e.distributed and concentrated heating.The result shows that the existence of a small and concentrated fraction of a strong microwave absorbing mineral will change the failure mechanism from the distributed heating to the concentrated heating,which can increase the weakening over microwave efficiency(WOME)by more than 10 folds.This observation is further investigated using the developed coupled numerical model.It is shown that at the same input energy,the existence of microwave absorbing minerals can cause major heat concentration inside the rock and increase the maximum temperature by up to three times.
基金Funded by the Center of Excellence in Metals and Materials Engineering(CEMME),Faculty of Engineering,Prince of Songkla UniversitySupported by the National Science,Research and Innovation Fund(NSRF)and Prince of Songkla University(No.ENG6505079S)。
文摘Repair welding of AA 6082-T6 joints was carried out using ER 4043 filler through the TIG welding process with or without pulsed current.Microstructure and mechanical characteristics of the joints before and after repairing were investigated by examining macrostructure,microstructure,and distributions of porosity in the weld metal(WM),and by hardness,tensile,and bending tests.We observed that the welding current,phase transformations in heat-affected zone(HAZ)and porosity introduced in the WM during welding influence on its mechanical properties in sequence.The experimental results showed that the bead width and penetration as well as size of pores in the joints were mainly influenced by the welding currents.The sound joints were obtained at a welding current of 140 A with or without pulsed current when welding speed and gas flow rate were set at 20 cm·min-1 and 15 L·min-1,respectively.Among them,the decrease in mechanical properties of repair weld(RW)was directly related to the phase transformations in the over-ageing zone due to the double welding thermal cycles and elevated distribution of porosity in the WM.In addition,it was observed that the comparatively smaller grain size and lower porosity in WM of the RW produced by pulsed TIG welding gave a positive effect on its mechanical properties.
文摘Induced seismicity is strongly related to various engineering projects that cause anthropogenic in-situ stress change at a great depth.Hence,there is a need to estimate and mitigate the associated risks.In the past,various simulation methods have been developed and applied to induced seismicity analysis,but there is still a fundamental diference between simulation results and feld observations in terms of the spatial distribution of seismic events and its frequency.The present study aims to develop a method to simulate spatially distributed on-fault seismicity whilst reproducing a complex stress state in the fault zone.Hence,an equivalent continuum model is constructed,based on a discrete fracture network within a fault damage zone,by employing the crack tensor theory.A fault core is simulated at the center of the model as a discontinuous plane.Using the model,a heterogeneous stress state with stress anomalies in the fault zone is frst simulated by applying tractions on the model outer boundaries.Subsequently,the efective normal stress on the fault plane is decreased in a stepwise manner to induce slip.The simulation result is validated in terms of the b-value and other seismic source parameters,hence demonstrating that the model can reproduce spatially and temporally distributed on-fault seismicity.Further analysis on the parameters shows the variation of frequency-magnitude distribution before the occurrence of large seismic events.This variation is found to be consistent with feld observations,thus suggesting the potential use of this simulation method in evaluating the risk for seismic hazards in various engineering projects.
文摘The customarily discarded exhaust from the fossil fuel-based power plants of the off-grid mines holds the thermal potential to fulfill the heating requirement of the underground operation.This present research fills in an important research gap by investigating the coupling effect between a diesel exhaust heat recovery and an intake air heating system employed in a remote mine.An integrative approach comprising analytical,numerical,and experimental assessment has been adapted.The novel analytical model developed here establishes the reliability of the proposed mine heating system by providing comparative analysis between a coupled and a decoupled system.The effect of working fluid variation has been examined by the numerical analysis and the possible improvement has been identified.Experimental investigations present a demonstration of the successful lab-scale implementation of the concept and validate the numerical and analytical models developed.Successful deployment of the fully coupled mine heating system proposed here will assist the mining industry on its journey towards energy-efficient,and sustainable mining practices through nearly 70%reduction in fossil fuel consumption for heating intentions.
基金financially supported by the Singapore Economic Development Board (EDB) through Minerals Metals and Materials Technology Centre (M3TC) (No.R261501013414)
文摘Presence of fine dust in air causes serious health hazard for mine operators resulting in such serious problems as coal workers’pneumoconiosis and silicosis.Major sources of dust appear of course along the mining face where the minerals are extracted.Proper control and management are required to ensure safe working environment in the mine.Here,we utilize the computational fluid dynamic(CFD)approach to evaluate various methods used for mitigating dust dispersion from the mining face and for ensuring safe level of dust concentration in the mine tunnel for safety of the operators.The methods used include:application of blowing and exhaust fans,application of brattice and combination of both.The results suggest that among the examined methods,implementation of appropriately located brattice to direct the flow from the main shaft to the mining face is the most effective method to direct dust particles away from the mining face.
基金supported by the National Basic Research Program Project of China(No.2010CB732004)the National Natural Science Foundation Project of China(Nos.50934006 and41272304)+2 种基金the Graduated Students’ResearchInnovation Fund Project of Hunan Province of China(No.CX2011B119)the Scholarship Award for Excellent Doctoral Student of Ministry of Education of China and the Valuable Equipment Open Sharing Fund of Central South University(No.1343-76140000022)
文摘An approach which combines particle swarm optimization and support vector machine(PSO–SVM)is proposed to forecast large-scale goaf instability(LSGI).Firstly,influencing factors of goaf safety are analyzed,and following parameters were selected as evaluation indexes in the LSGI:uniaxial compressive strength(UCS)of rock,elastic modulus(E)of rock,rock quality designation(RQD),area ration of pillar(Sp),the ratio of width to height of the pillar(w/h),depth of ore body(H),volume of goaf(V),dip of ore body(a)and area of goaf(Sg).Then LSGI forecasting model by PSO-SVM was established according to the influencing factors.The performance of hybrid model(PSO+SVM=PSO–SVM)has been compared with the grid search method of support vector machine(GSM–SVM)model.The actual data of 40 goafs are applied to research the forecasting ability of the proposed method,and two cases of underground mine are also validated by the proposed model.The results indicated that the heuristic algorithm of PSO can speed up the SVM parameter optimization search,and the predictive ability of the PSO–SVM model with the RBF kernel function is acceptable and robust,which might hold a high potential to become a useful tool in goaf risky prediction research.
基金the National Natural Science Foundation of China(Nos.51374095 and 51404099)the Program for Innovative Research Team in University of Ministry of Education of China(IRT_16R22)+1 种基金the Henan Provincial Key Scientific and Technological Project(No.092102310314)China Scholarship Council
文摘This paper aims to improve the accuracy and applicability of gas diffusion mathematical models from coal particles. Firstly, a new constitutive model for gas diffusion from coal particles with tri-disperse pore structure is constructed by considering the difference in characteristics between soft coal and hard coal.The analytical solution is then derived, that is, the quantitative relationship between gas diffusion rate(Qt/Q_∞) and diffusion time(t), The pore structure parameters of soft coal and hard coal from Juji coal mine are determined. Gas diffusion rules are numerically calculated and investigated by physical simulation methods. Lastly, the applicability of this model is verified. The results show that the homogeneous model only applies to the gas diffusion process of hard coal during the initial 10 min. The calculation results from this model and the physical experimental results of soft coal and hard coal are nearly identical during the initial 30 min.
基金financially supported by the Chair in Mineral Processing at McGill University, under the Collaborative Research and Development program of NSERC (Natural Sciences and Engineering Research Council of Canada) with industrial sponsorship from Vale, Teck Cominco, Xstrata Process Support, Agnico-Eagle, Shell Canada, Barrick Gold, COREM, SGS Lakefield Research and Flottec
文摘Froth flotation is a widely used process of particle separation exploiting differences in surface properties. It is important to point out that overall flotation performance(grade and recovery) is a consequence of the quality and quantity of the solid particles collected from the pulp phase, transported into the froth phase, and surviving as bubble-particle aggregates into the overflow. This work will focus on studying these phenomena and will incorporate the effects of particle hydrophobicities in the 3-phase system. Solids are classed as either hydrophilic non-sulphide gangue(e.g. silica, talc), hydrophilic sulphide(e.g. pyrite), or hydrophobic sulphide(e.g. sphalerite). Talc is a surface-active species of gangue that has been shown to behave differently from silica(frother adsorbs on the surface of talc particles). Both are common components of ores and will be studied in detail. The focus of this work is to investigate the role of solids on pulp hydrodynamics, froth bubble coalescence intensity, water overflow rate with solids present, and in particular, the interactions between solids, frother and gas on the gas dispersion parameters. The results show that in the pulp zone there is no effect of solids on bubble size and gas holdup; in the froth zone, although hydrophilic particles solely do not effect on the water overflow rate, hydrophobic particles produce higher intensity of rates on water overflow and bubble coalescence, and many be attributed to the water reattachment.
基金supports from several sources including the Thai Research Fund (No. MRG5280215)Prince of Songkla University (No. AGR530031M)the Royal Golden Jubilee Ph.D. Program (No. PHD/0134/2551 and PHD/0173/2550)
文摘Several rheocasting processes are developed or applied worldwide in the metal forming industry.One of the new rheocasting processes is the gas induced semi-solid(GISS) process.The GISS process utilizes the principle of rapid heat extraction and vigorous local extraction using the injection of fine gas bubbles through a graphite diffuser.Several forming processes such as die casting,squeeze casting,gravity casting,and rheo-extrusion of the semi-solid slurries prepared by the GISS process have also been conducted.The GISS process is capable of processing various alloys including cast aluminum alloys,die casting aluminum alloys,wrought aluminum alloys,and zinc alloys.The GISS process is currently developed to be used commercially in the industry with the focus on forming semi-solid slurries containing low fractions solid(< 0.25) into parts.The research and development activities of the GISS process were discussed and the status of the industrial developments of this process was reported.
文摘The production cycle of open-cast coal mines generally in eludes drilling, blasting, loading, hauling and coal preparation activities. Individual optimization of these activities does not mean that the whole system is optimized. This paper proposes a cost model considering all activities in mining cycle and system-wide approach to minimize the total mining cost of bench production. Since the fragmentation size and blast-hole diameter are linked to all activities of mining system, they are considered as decision variables in the problem form ul at io n. The operatio n costs are then minimized by using the evolutionary algorithm. Moreover, the impact of the change in the explosive price, and the hourly unit cost of equipment on total mining cost is quantified by sensitivity analysis. A case study is implemented to demonstrate the developed model.
基金Project supported by the Collaborative Research and Development Program of Natural Sciences and Engineering Research Council of Canada
文摘The size of bubbles created in the flotation process is of great importance to the efficiency of the mineral separation achieved.Meanwhile,it is believed that frother transport between phases is perhaps the most important reason for the interactive nature of the phenomena occurring in the bulk and froth phases in flotation,as frother adsorbed in the surface of rising bubbles is removed from the bulk phase and then released into the froth as a fraction of the bubbles burst.This causes the increased concentration in the froth compared to the bulk concentration,named as frother partitioning.Partitioning reflects the adsorption of frother on bubbles and how to influence bubble size is not known.There currently exists no such a topic aiming to link these two key parameters.To fill this vacancy,the correspondence between bubble size and frother partitioning was examined.Bubble size was measured by sampling-for-imaging(SFI)technique.Using total organic carbon(TOC)analysis to measure the frother partitioning between froth and bulk phases was determined.Measurements have shown,with no exceptions including four different frothers,higher frother concentration is in the bulk than in the froth.The results also show strong partitioning giving an increase in bubble size which implies there is a compelling relationship between these two,represented by CFroth/CBulk and D32.The CFroth/CBulkand D32 curves show similar exponential decay relationships as a function of added frother in the system,strongly suggesting that the frother concentration gradient between the bulk solution and the bubble interface is the driving force contributing to bubble size reduction.
基金the National Natural Science Foundation of China(51774119,51374095,and 51604092)the primary research projects of critical scientific research in Henan Colleges and Universities(19zx003)+1 种基金Program for Innovative Research Team in University of Ministry of Education of China(IRT_16R22)State Key Laboratory Cultivation Base for Gas Geology and Gas Control(Henan Polytechnic University)(WS2018A02)。
文摘Coal seam gas content is frequently measured in quantity during underground coal mining operation and coalbed methane(CBM)exploration as a significant basic parameter.Due to the calculation error of lost gas and residual gas in the direct method,the efficiency and accuracy of the current methods are not inadequate to the large area multi-point measurement of coal seam gas content.This paper firstly deduces a simplified theoretical dynamic model for calculating lost gas based on gas dynamic diffusion theory.Secondly,the effects of various factors on gas dynamic diffusion from coal particle are experimentally studied.And sampling procedure of representative coal particle is improved.Thirdly,a new estimation method of residual gas content based on excess adsorption and competitive adsorption theory is proposed.The results showed that the maximum error of calculating the losing gas content by using the new simplified model is only 4%.Considering the influence of particle size on gas diffusion law,the particle size of the collected coal sample is below 0.25 mm,which improves the measurement speed and reflects the safety representativeness of the sample.The determination time of gas content reduced from 36 to 3 h/piece.Moreover,the absolute error is 0.15–0.50 m^3/t,and the relative error is within 5%.A new engineering method for determining the coal seam gas content is developed according to the above research.
基金the fund supported by the National Natural Science Foundation of China(Grant No.U1261207)
文摘The paper presents the influence of varying immediate roof thickness on the lower strong roof strata movement and failure pattern in longwall coal mining with large mining height. The investigation is based on 58 geological drill holes and hydraulic shield pressure measurements around the longwall Panel 42105 of the Buertai Mine in Inner Mongolia Autonomous Region, China. The longwall Panel 42105 is characterized by relatively soft immediate roof strata of varying thickness superposed by strong strata,herein defined as lower strong roof. A voussoir beam model is adopted to interpret the structural movement of the lower strong roof strata and shield pressure measurements. It is shown that when the immediate roof is relatively thick, the broken overlying lower strong roof tends to form a stable voussoir beam with previously broken layer, thus not exerting high pressure on the hydraulic shield and working face. When the immediate roof is relatively thin, the broken overlying lower strong roof tends to behave as a cantilever beam, thus exerting higher pressure on the hydraulic shield and working face. Comparison of model predictions with measured time-weighted average shield pressure(TWAP) shows good agreement.
基金The financial support from the Natural Sciences and Engineering Research Council of Canada(NSERC)and our industrial partners,DeBeers,Metso,and Argex companies as well as PhD scholarship to Mr.Samir Deyab from the department of mining engineering,Tripoli University are gratefully acknowledged.
文摘This study is a part of an overall research project on the effects of microwave(MW)irradiation on rocks for assisted rock breaking systems as well as mineral processing at McGill University.For the first time,this paper highlights a comprehensive investigation on the effects of microwave irradiation on Canadian kimberlites.Potential contribution to the continuous rock excavation and rock weakening effect prior to implementation of mechanical techniques was explored.Two different kimberlite rocks,i.e.volcaniclastic kimberlite(VK)and hypabyssal kimberlite(HK),and granite samples were studied.Some important physical properties of the rock samples were measured including rock quality designation(RQD),specific gravity,porosity,and specific heat capacity.Rock samples were treated for various exposure times using a multi-mode MWunit at different power levels ranging from 2 kW to 15 kW.The effect of MW irradiation on rock samples was investigated.The results indicate that the mechanical properties including unconfined compressive strength(UCS)and Brazilian tensile strength(BTS)were significantly dropped as a result of MWirradiation.Finally,the effect on rock abrasivity using the Cerchar abrasivity index(CAI)has also been discussed.
基金financially supported by the National Key Research and Development Project of China for Demonstration of Integrated Utilization of Solid Waste in Distinctive Convergent Areas of Southeast Light Industry Building Materials(2019YFC1904500)the National Natural Science Foundation of China(Grant No.81770222)+4 种基金the Social Development Industry University Research Cooperation Project from the Department of Science and Technology in Fujian(2018Y4002)support by the Award Program for Fujian Minjiang Scholar Professorshipsupport from the Australian Research Grants Council(DP130104648)support from the NSERC Discovery Grant(NSERC RGPIN-2020-04463)McGill Start-Up Grant。
文摘Owing to safety issue and low energy density of liquid lithium-ion batteries(LIBs),all-solid-state lithium metal batteries(ASLMBs)with unique all-solid-state electrolytes(SEs)have attracted wide attentions.This arises mainly from the advantages of the SEs in the suppression of lithium dendrite growth,long cycle life,and broad working temperature range,showing huge potential applications in electronic devices,electric vehicles,smart grids,and biomedical devices.However,SEs suffer from low lithiumion conductivity and low mechanical integrity,slowing down the development of practical ASLMBs.Nanostructure engineering is of great efficiency in tuning the structure and composition of the SEs with improved lithium-ion conductivity and mechanical integrity.Among various available technologies for nanostructure engineering,electrospinning is a promising technique because of its simple operation,cost-effectiveness,and efficient integration with different components.In this review,we will first give a simple description of the electrospinning process.Then,the use of electrospinning technique in the synthesis of various SEs is summarized,for example,organic nanofibrous matrix,organic/inorganic nanofibrous matrix,and inorganic nanofibrous matrix combined with other components.The current development of the advanced architectures of SEs through electrospinning technology is also presented to provide references and ideas for designing high-performance ASLMBs.Finally,an outlook and further challenges in the preparation of advanced SEs for ASLMBs through electrospinning engineering are given.
基金Partially Funded by National Research Universities(NRU)(ENG 5805855)Faculty of Engineering,Prince of Songkla University,Hatyai Songkhla,Thailand
文摘7XXX series aluminium alloys generally present low weldability by fusion welding methods because of the sensitivity to weld solidification cracking, vaporization of strengthening alloys and other defects in the fusion zone. Friction stir welding(FSW) can be deployed successfully with aluminium alloys. We presented the effect of post-weld heat treatment(PWHT) on the microstructure and mechanical properties of SSM7075 joints. Semi solid plates were butt-welded by FSW at a rotation speed of 1110 r/min, welding speeds of 70 and 110 mm/min. Solution treatment, artificial aging, and T6(solution treatment and artificial aging combined) were applied to the welded joints, each with three samples. It was found that the T6 joints at the speed of 70 mm/min yielded the highest tensile strength of 459.23 MPa. This condition best enhanced the mechanical properties of FSW SSM7075 aluminium alloy joints.
