Deep and ultra-deep reservoirs have gradually become the primary focus of hydrocarbon exploration as a result of a series of significant discoveries in deep hydrocarbon exploration worldwide.These reservoirs present u...Deep and ultra-deep reservoirs have gradually become the primary focus of hydrocarbon exploration as a result of a series of significant discoveries in deep hydrocarbon exploration worldwide.These reservoirs present unique challenges due to their deep burial depth(4500-8882 m),low matrix permeability,complex crustal stress conditions,high temperature and pressure(HTHP,150-200℃,105-155 MPa),coupled with high salinity of formation water.Consequently,the costs associated with their exploitation and development are exceptionally high.In deep and ultra-deep reservoirs,hydraulic fracturing is commonly used to achieve high and stable production.During hydraulic fracturing,a substantial volume of fluid is injected into the reservoir.However,statistical analysis reveals that the flowback rate is typically less than 30%,leaving the majority of the fluid trapped within the reservoir.Therefore,hydraulic fracturing in deep reservoirs not only enhances the reservoir permeability by creating artificial fractures but also damages reservoirs due to the fracturing fluids involved.The challenging“three-high”environment of a deep reservoir,characterized by high temperature,high pressure,and high salinity,exacerbates conventional forms of damage,including water sensitivity,retention of fracturing fluids,rock creep,and proppant breakage.In addition,specific damage mechanisms come into play,such as fracturing fluid decomposition at elevated temperatures and proppant diagenetic reactions at HTHP conditions.Presently,the foremost concern in deep oil and gas development lies in effectively assessing the damage inflicted on these reservoirs by hydraulic fracturing,comprehending the underlying mechanisms,and selecting appropriate solutions.It's noteworthy that the majority of existing studies on reservoir damage primarily focus on conventional reservoirs,with limited attention given to deep reservoirs and a lack of systematic summaries.In light of this,our approach entails initially summarizing the current knowledge pertaining to the types of fracturing fluids employed in deep and ultra-deep reservoirs.Subsequently,we delve into a systematic examination of the damage processes and mechanisms caused by fracturing fluids within the context of hydraulic fracturing in deep reservoirs,taking into account the unique reservoir characteristics of high temperature,high pressure,and high in-situ stress.In addition,we provide an overview of research progress related to high-temperature deep reservoir fracturing fluid and the damage of aqueous fracturing fluids to rock matrix,both artificial and natural fractures,and sand-packed fractures.We conclude by offering a summary of current research advancements and future directions,which hold significant potential for facilitating the efficient development of deep oil and gas reservoirs while effectively mitigating reservoir damage.展开更多
Fracture propagation in shale under in situ conditions is a critical but poorly understood mechanical process in hydraulic fracturing for deep shale gas reservoirs. To address this, hydraulic fracturing experiments we...Fracture propagation in shale under in situ conditions is a critical but poorly understood mechanical process in hydraulic fracturing for deep shale gas reservoirs. To address this, hydraulic fracturing experiments were conducted on hollow double-wing crack specimens of the Longmaxi shale under conditions simulating the ground surface(confining pressure σ_(cp)=0, room temperature(Tr)) and at depths of 1600 m(σ_(cp)=40 MPa, Ti=70 ℃) and 3300 m(σ_(cp)=80 MPa, high temperature Ti=110 ℃) in the study area.High in situ stress was found to significantly increase fracture toughness through constrained microcracking and particle frictional bridging mechanisms. Increasing the temperature enhances rather than weakens the fracture resistance because it increases the grain debonding length, which dissipates more plastic energy and enlarges grains to close microdefects and generate compressive stress to inhibit microcracking. Interestingly, the fracture toughness anisotropy in the shale was found to be nearly constant across burial depths, despite reported variations with increasing confining pressure. Heated water was not found to be as important as the in situ environment in influencing shale fracture. These findings emphasize the need to test the fracture toughness of deep shales under coupled in situ stress and temperature conditions rather than focusing on either in situ stress or temperature alone.展开更多
Deep shale gas reserves that have been fractured typically have many relatively close perforation holes. Due to theproximity of each fracture during the formation of the fracture network, there is significant stress i...Deep shale gas reserves that have been fractured typically have many relatively close perforation holes. Due to theproximity of each fracture during the formation of the fracture network, there is significant stress interference,which results in uneven fracture propagation. It is common practice to use “balls” to temporarily plug fractureopenings in order to lessen liquid intake and achieve uniform propagation in each cluster. In this study, a diameteroptimization model is introduced for these plugging balls based on a multi-cluster fracture propagationmodel and a perforation dynamic abrasion model. This approach relies on proper consideration of the multiphasenature of the considered problem and the interaction force between the involved fluid and solid phases. Accordingly,it can take into account the behavior of the gradually changing hole diameter due to proppant continuousperforation erosion. Moreover, it can provide useful information about the fluid-dynamic behavior of the consideredsystem before and after plugging. It is shown that when the diameter of the temporary plugging ball is1.2 times that of the perforation hole, the perforation holes of each cluster can be effectively blocked.展开更多
No shale-rock physical model has been established in the observation coordinate system.To this end,this paper carried out anisotropic wave velocity tests on shale rock and compared the Thomsen,Daley,and Berryman solut...No shale-rock physical model has been established in the observation coordinate system.To this end,this paper carried out anisotropic wave velocity tests on shale rock and compared the Thomsen,Daley,and Berryman solutions to characterize anisotropic acoustic wave velocity.Finally,the Daley solution was selected.Based on basic rock physical models,such as SCA and DEM methods,and combined with the Daley solution,an anisotropic shale-rock physical model was established in the observation coordinate system and applied in Well B1 in the Luzhou area,Sichuan Basin.Our research conclusions were as follows:1.for the samples from the same core,the P-wave velocities in three directions were in the order VP11>VP45>VP33,shear wave velocity VS11 was the largest,but VS33 and VS45 did not follow the law of Vs33>Vs45 for some samples;2.the Daley solution,which not only considers the accuracy requirements but also has a complete expression of P-,SV-,and SH-waves,is most suitable for characterization of anisotropic wave velocity in this study area;3.the rock physical model constructed in the observation coordinate system has high accuracy,in which the absolute value of the relative error of the P-wave slowness was between 0%and 5.05%(0.55%on average),and that of shear-wave slowness was between 0%and 6.05%(0.59%on average);4.the acoustic waves recorded in Well B1 in the observation coordinate system were very different from those in the constitutive coordinate system.The relative difference of the P-wave was between 6.76%and 30.84%(14.68%on average),and that of the S-wave was between 7.00%and 23.44%(13.99%on average).The acoustic slowness measured in the observation coordinate system,such as in a deviated well or a horizontal well section,must be converted to the constitutive coordinate system before it can be used in subsequent engineering applications;5.the anisotropic shale-rock physical model built in the observation coordinate system proposed in this paper can provide basic data and guidance for subsequent pore pressure prediction,geomechanical modeling,and fracturing stimulation design for deviated and horizontal wells.展开更多
In oilfield fracturing construction, to solve the technical problems such as poor dissolution effect and long dissolution time of polymer drag reducer powder, the rheological regulator, phase transfer agent, organic s...In oilfield fracturing construction, to solve the technical problems such as poor dissolution effect and long dissolution time of polymer drag reducer powder, the rheological regulator, phase transfer agent, organic solvent, and drag reducer powder were compounded to prepare a drag reducer emulsion that was soluble in water. The stability of the drag reducer emulsion was observed at room temperature for 90 days. The effects of the rheological regulator, phase transfer agent, and organic solvent on the stability and solubility of the drag reducer emulsion were studied. The dissolution time, dissolution effect, viscosity of the aqueous solution, and drag reduction performance of the drag reducer emulsion were evaluated. The results show the stability rate of the drag reducer emulsion prepared by MOST-1 rheological regulator, BHJ-8 and BHJ-6 compound phase inversion agent, ethylene glycol ether and 120 - 140 mesh powder can reach 97% at room temperature for 90 days. Compared with the drag reducer powder, when the aqueous solution concentration is 0.1%, the dissolution time is only 28 s, the viscosity can be increased by 30%, and the drag reduction rate can be increased by up to 8%.展开更多
A new quantitative risk assessment method for hot work is proposed based on the analytic hierarchy process(AHP)and fuzzy comprehensive evaluation(FCE).It can help pipeline companies realize the risk management of hot ...A new quantitative risk assessment method for hot work is proposed based on the analytic hierarchy process(AHP)and fuzzy comprehensive evaluation(FCE).It can help pipeline companies realize the risk management of hot work and further ensure the safe operation of oil and gas pipelines.Taking one natural gas pipeline in China as an example,this paper evaluates the risk of a single hot work in the spring of one natural gas pipeline in a high consequence region.First of all,the risk factors are determined with reference to the job safety analysis(JSA),and then experts were invited to fill out a questionnaire to collect their opinions.According to the results of the questionnaire,AHP is used to calculate the weight coefficients of the evaluation indicators,and FCE is used to evaluate the risk level of hot work.After calculation,the comprehensive risk score of hot work is 40.888.It belongs to a"general risk".This method can not only quantitatively evaluate the risk levels of hot work,but also reasonably sort the importance of various risk factors.It is helpful for the effective management of hot work and provides suggestions for implementing control measures.展开更多
In this work,numerical models were developed to investigate the critical inclination of a pipeline to eliminate the water accumulation at the floor of the pipe carrying oil-water fluid.Computational fluid dynamics sof...In this work,numerical models were developed to investigate the critical inclination of a pipeline to eliminate the water accumulation at the floor of the pipe carrying oil-water fluid.Computational fluid dynamics software was used to establish a geometric model of the pipe with various inclination angles,and a grid-independent verification was conducted to determine a reasonable meshing method.Quantitative relationships were determined between the pipe inclination angle and the affecting factors including the flow velocity,viscosity and the pipe diameter,where the water accumulation would not be able to occur.Generally,the critical inclination angle increases with the fluid flow velocity.The refluxing of water is the key mechanism causing the water accumulation at the bottom of the pipe.In addition to the fluid flow velocity,an increase in fluid viscosity and a decrease in the pipe diameter cause an increase of the critical inclination angle that the water phase can be carried away by oil.The model can be used to determine the critical inclination of pipelines carrying oil-water fluid to cause the water accumulation and the operating conditions that can eliminate the accumulation of water phase at the pipe floor.展开更多
基金Dao-Bing Wang was supported by the Beijing Natural Science Foundation Project(No.3222030)the National Natural Science Foundation of China(No.52274002)+1 种基金the PetroChina Science and Technology Innovation Foundation Project(No.2021DQ02-0201)Fu-Jian Zhou was supported by the National Natural Science Foundation of China(No.52174045).
文摘Deep and ultra-deep reservoirs have gradually become the primary focus of hydrocarbon exploration as a result of a series of significant discoveries in deep hydrocarbon exploration worldwide.These reservoirs present unique challenges due to their deep burial depth(4500-8882 m),low matrix permeability,complex crustal stress conditions,high temperature and pressure(HTHP,150-200℃,105-155 MPa),coupled with high salinity of formation water.Consequently,the costs associated with their exploitation and development are exceptionally high.In deep and ultra-deep reservoirs,hydraulic fracturing is commonly used to achieve high and stable production.During hydraulic fracturing,a substantial volume of fluid is injected into the reservoir.However,statistical analysis reveals that the flowback rate is typically less than 30%,leaving the majority of the fluid trapped within the reservoir.Therefore,hydraulic fracturing in deep reservoirs not only enhances the reservoir permeability by creating artificial fractures but also damages reservoirs due to the fracturing fluids involved.The challenging“three-high”environment of a deep reservoir,characterized by high temperature,high pressure,and high salinity,exacerbates conventional forms of damage,including water sensitivity,retention of fracturing fluids,rock creep,and proppant breakage.In addition,specific damage mechanisms come into play,such as fracturing fluid decomposition at elevated temperatures and proppant diagenetic reactions at HTHP conditions.Presently,the foremost concern in deep oil and gas development lies in effectively assessing the damage inflicted on these reservoirs by hydraulic fracturing,comprehending the underlying mechanisms,and selecting appropriate solutions.It's noteworthy that the majority of existing studies on reservoir damage primarily focus on conventional reservoirs,with limited attention given to deep reservoirs and a lack of systematic summaries.In light of this,our approach entails initially summarizing the current knowledge pertaining to the types of fracturing fluids employed in deep and ultra-deep reservoirs.Subsequently,we delve into a systematic examination of the damage processes and mechanisms caused by fracturing fluids within the context of hydraulic fracturing in deep reservoirs,taking into account the unique reservoir characteristics of high temperature,high pressure,and high in-situ stress.In addition,we provide an overview of research progress related to high-temperature deep reservoir fracturing fluid and the damage of aqueous fracturing fluids to rock matrix,both artificial and natural fractures,and sand-packed fractures.We conclude by offering a summary of current research advancements and future directions,which hold significant potential for facilitating the efficient development of deep oil and gas reservoirs while effectively mitigating reservoir damage.
基金supported by the National Natural Science Foundation of China(No.12172240).
文摘Fracture propagation in shale under in situ conditions is a critical but poorly understood mechanical process in hydraulic fracturing for deep shale gas reservoirs. To address this, hydraulic fracturing experiments were conducted on hollow double-wing crack specimens of the Longmaxi shale under conditions simulating the ground surface(confining pressure σ_(cp)=0, room temperature(Tr)) and at depths of 1600 m(σ_(cp)=40 MPa, Ti=70 ℃) and 3300 m(σ_(cp)=80 MPa, high temperature Ti=110 ℃) in the study area.High in situ stress was found to significantly increase fracture toughness through constrained microcracking and particle frictional bridging mechanisms. Increasing the temperature enhances rather than weakens the fracture resistance because it increases the grain debonding length, which dissipates more plastic energy and enlarges grains to close microdefects and generate compressive stress to inhibit microcracking. Interestingly, the fracture toughness anisotropy in the shale was found to be nearly constant across burial depths, despite reported variations with increasing confining pressure. Heated water was not found to be as important as the in situ environment in influencing shale fracture. These findings emphasize the need to test the fracture toughness of deep shales under coupled in situ stress and temperature conditions rather than focusing on either in situ stress or temperature alone.
基金supported by the National Natural Science Foundation of China (No.U21B2071).
文摘Deep shale gas reserves that have been fractured typically have many relatively close perforation holes. Due to theproximity of each fracture during the formation of the fracture network, there is significant stress interference,which results in uneven fracture propagation. It is common practice to use “balls” to temporarily plug fractureopenings in order to lessen liquid intake and achieve uniform propagation in each cluster. In this study, a diameteroptimization model is introduced for these plugging balls based on a multi-cluster fracture propagationmodel and a perforation dynamic abrasion model. This approach relies on proper consideration of the multiphasenature of the considered problem and the interaction force between the involved fluid and solid phases. Accordingly,it can take into account the behavior of the gradually changing hole diameter due to proppant continuousperforation erosion. Moreover, it can provide useful information about the fluid-dynamic behavior of the consideredsystem before and after plugging. It is shown that when the diameter of the temporary plugging ball is1.2 times that of the perforation hole, the perforation holes of each cluster can be effectively blocked.
基金supported by the Post Doctoral Project of Southwest Oil and Gas Field Research on Geomechanics and Effective Fracturing Factors of Deep Shale” (No. 20210302-31)the Scientific Research Project of Southwest Oil and Gas Field Branch “Geological Engineering Integration of Well Block Yang101”。
文摘No shale-rock physical model has been established in the observation coordinate system.To this end,this paper carried out anisotropic wave velocity tests on shale rock and compared the Thomsen,Daley,and Berryman solutions to characterize anisotropic acoustic wave velocity.Finally,the Daley solution was selected.Based on basic rock physical models,such as SCA and DEM methods,and combined with the Daley solution,an anisotropic shale-rock physical model was established in the observation coordinate system and applied in Well B1 in the Luzhou area,Sichuan Basin.Our research conclusions were as follows:1.for the samples from the same core,the P-wave velocities in three directions were in the order VP11>VP45>VP33,shear wave velocity VS11 was the largest,but VS33 and VS45 did not follow the law of Vs33>Vs45 for some samples;2.the Daley solution,which not only considers the accuracy requirements but also has a complete expression of P-,SV-,and SH-waves,is most suitable for characterization of anisotropic wave velocity in this study area;3.the rock physical model constructed in the observation coordinate system has high accuracy,in which the absolute value of the relative error of the P-wave slowness was between 0%and 5.05%(0.55%on average),and that of shear-wave slowness was between 0%and 6.05%(0.59%on average);4.the acoustic waves recorded in Well B1 in the observation coordinate system were very different from those in the constitutive coordinate system.The relative difference of the P-wave was between 6.76%and 30.84%(14.68%on average),and that of the S-wave was between 7.00%and 23.44%(13.99%on average).The acoustic slowness measured in the observation coordinate system,such as in a deviated well or a horizontal well section,must be converted to the constitutive coordinate system before it can be used in subsequent engineering applications;5.the anisotropic shale-rock physical model built in the observation coordinate system proposed in this paper can provide basic data and guidance for subsequent pore pressure prediction,geomechanical modeling,and fracturing stimulation design for deviated and horizontal wells.
文摘In oilfield fracturing construction, to solve the technical problems such as poor dissolution effect and long dissolution time of polymer drag reducer powder, the rheological regulator, phase transfer agent, organic solvent, and drag reducer powder were compounded to prepare a drag reducer emulsion that was soluble in water. The stability of the drag reducer emulsion was observed at room temperature for 90 days. The effects of the rheological regulator, phase transfer agent, and organic solvent on the stability and solubility of the drag reducer emulsion were studied. The dissolution time, dissolution effect, viscosity of the aqueous solution, and drag reduction performance of the drag reducer emulsion were evaluated. The results show the stability rate of the drag reducer emulsion prepared by MOST-1 rheological regulator, BHJ-8 and BHJ-6 compound phase inversion agent, ethylene glycol ether and 120 - 140 mesh powder can reach 97% at room temperature for 90 days. Compared with the drag reducer powder, when the aqueous solution concentration is 0.1%, the dissolution time is only 28 s, the viscosity can be increased by 30%, and the drag reduction rate can be increased by up to 8%.
文摘A new quantitative risk assessment method for hot work is proposed based on the analytic hierarchy process(AHP)and fuzzy comprehensive evaluation(FCE).It can help pipeline companies realize the risk management of hot work and further ensure the safe operation of oil and gas pipelines.Taking one natural gas pipeline in China as an example,this paper evaluates the risk of a single hot work in the spring of one natural gas pipeline in a high consequence region.First of all,the risk factors are determined with reference to the job safety analysis(JSA),and then experts were invited to fill out a questionnaire to collect their opinions.According to the results of the questionnaire,AHP is used to calculate the weight coefficients of the evaluation indicators,and FCE is used to evaluate the risk level of hot work.After calculation,the comprehensive risk score of hot work is 40.888.It belongs to a"general risk".This method can not only quantitatively evaluate the risk levels of hot work,but also reasonably sort the importance of various risk factors.It is helpful for the effective management of hot work and provides suggestions for implementing control measures.
文摘In this work,numerical models were developed to investigate the critical inclination of a pipeline to eliminate the water accumulation at the floor of the pipe carrying oil-water fluid.Computational fluid dynamics software was used to establish a geometric model of the pipe with various inclination angles,and a grid-independent verification was conducted to determine a reasonable meshing method.Quantitative relationships were determined between the pipe inclination angle and the affecting factors including the flow velocity,viscosity and the pipe diameter,where the water accumulation would not be able to occur.Generally,the critical inclination angle increases with the fluid flow velocity.The refluxing of water is the key mechanism causing the water accumulation at the bottom of the pipe.In addition to the fluid flow velocity,an increase in fluid viscosity and a decrease in the pipe diameter cause an increase of the critical inclination angle that the water phase can be carried away by oil.The model can be used to determine the critical inclination of pipelines carrying oil-water fluid to cause the water accumulation and the operating conditions that can eliminate the accumulation of water phase at the pipe floor.
