Bi3.15Nd0.85Ti3O12 （BNT） powder and thin film were prepared by metal organic decomposition （MOD） method. The heat flow curve of BNT powder was measured with a modulated temperature differential scanning calorimete...Bi3.15Nd0.85Ti3O12 （BNT） powder and thin film were prepared by metal organic decomposition （MOD） method. The heat flow curve of BNT powder was measured with a modulated temperature differential scanning calorimeter, and thermal physical parameters such as thermal conductivity coefficient and thermal diffusion coefficient were obtained from the heat flow curve. The phase identification, ferroelectric, and piezoelectric properties of BNT thin film annealed at 700℃ were investigated with X-ray diffractometer, ferroelectric analyzer, and scanning probe microscope. The results show that the thin films consisting of a single phase of bismuth-layered perovskite are polycrystalline, without a preferred orientation. Remnant polarization 2Pr is 63.2 μC/cm2 under 530 kV/cm applied field, and the effective piezoelectric coefficient d33 is 30 pm/V.展开更多
Considering the characteristics of perovskite structure, a kinetic Monte Carlo(KMC) model, in which Born-Mayer- Huggins(BMH) potential was introduced to calculate the interatomic interactions and the bonding ratio was...Considering the characteristics of perovskite structure, a kinetic Monte Carlo(KMC) model, in which Born-Mayer- Huggins(BMH) potential was introduced to calculate the interatomic interactions and the bonding ratio was defined to reflect the crystallinity, was developed to simulate the growth of BaTiO3 thin film via pulsed laser deposition(PLD). Not only the atoms deposition and adatoms diffusion, but also the bonding of adatoms were considered distinguishing with the traditional algorithm. The effects of substrate temperature, laser pulse repetition rate and incident kinetic energy on BaTiO3 thin film growth were investigated at submonolayer regime. The results show that the island density decreases and the bonding ratio increases with the increase of substrate temperature from 700 to 850 K. With the laser pulse repetition rate increasing, the island density decreases while the bonding ratio increases. With the incident kinetic energy increasing, the island density decreases except 6.2 eV<Ek<9.6 eV, and the bonding ratio increases at Ek<9.6 eV. The simulation results were discussed compared with the previous experimental results.展开更多
基金Projects(10825209,50872117) supported by the National Natural Science Foundation of ChinaProject([2009]17) supported by Changjiang Scholar Incentive Program,China+2 种基金Project([2007]362) supported by Hunan’s Prestigious Furong Scholar Award,ChinaProject supported by Aid Program for Science and Technology Innovative Research Team in Higher Educational Instituions of Hunan Province,ChinaProject(09JJ7004) supported by the Natural Science Foundation of Hunan Province for Innovation Group,China
文摘Bi3.15Nd0.85Ti3O12 （BNT） powder and thin film were prepared by metal organic decomposition （MOD） method. The heat flow curve of BNT powder was measured with a modulated temperature differential scanning calorimeter, and thermal physical parameters such as thermal conductivity coefficient and thermal diffusion coefficient were obtained from the heat flow curve. The phase identification, ferroelectric, and piezoelectric properties of BNT thin film annealed at 700℃ were investigated with X-ray diffractometer, ferroelectric analyzer, and scanning probe microscope. The results show that the thin films consisting of a single phase of bismuth-layered perovskite are polycrystalline, without a preferred orientation. Remnant polarization 2Pr is 63.2 μC/cm2 under 530 kV/cm applied field, and the effective piezoelectric coefficient d33 is 30 pm/V.
基金Projects(10472099 10672139) supported by the National Natural Science Foundation of China+2 种基金Project(207079) supported by the Key Project of Ministry of Education of PRCProject(05FJ2005) supported by Key Project of Scientific Technological Department of Hunan Province, ChinaProject(06A072) supported by the Key Project of Education Department of Hunan Province, China
文摘Considering the characteristics of perovskite structure, a kinetic Monte Carlo(KMC) model, in which Born-Mayer- Huggins(BMH) potential was introduced to calculate the interatomic interactions and the bonding ratio was defined to reflect the crystallinity, was developed to simulate the growth of BaTiO3 thin film via pulsed laser deposition(PLD). Not only the atoms deposition and adatoms diffusion, but also the bonding of adatoms were considered distinguishing with the traditional algorithm. The effects of substrate temperature, laser pulse repetition rate and incident kinetic energy on BaTiO3 thin film growth were investigated at submonolayer regime. The results show that the island density decreases and the bonding ratio increases with the increase of substrate temperature from 700 to 850 K. With the laser pulse repetition rate increasing, the island density decreases while the bonding ratio increases. With the incident kinetic energy increasing, the island density decreases except 6.2 eV<Ek<9.6 eV, and the bonding ratio increases at Ek<9.6 eV. The simulation results were discussed compared with the previous experimental results.
