Impact of amplified spontaneous emission(ASE)noise on the stimulated Raman scattering(SRS)threshold of highpower fiber amplifiers is demonstrated numerically through a spectral evolution approach.The simulation result...Impact of amplified spontaneous emission(ASE)noise on the stimulated Raman scattering(SRS)threshold of highpower fiber amplifiers is demonstrated numerically through a spectral evolution approach.The simulation results confirm that ASE noise in the Raman wavelength band could reduce the SRS threshold of high-power fiber amplifiers significantly.As for ASE noise originated the main amplifier,it becomes stronger and reduces the SRS threshold at shorter operation wavelength below 1052 nm.As for ASE noise originated from the seed laser,it reduces the SRS threshold at different operation wavelength under the condition that the Raman ratio is over-90 dB in the seed laser.The theoretical method and results in this work could provide a well reference to extend the operation wavelength of high-power fiber lasers.展开更多
Generation of noise-like rectangular pulse was investigated systematically in an Er–Yb co-doped fiber laser based on an intra-cavity coupler with different coupling ratios.When the coupling ratio was 5/95,stable mode...Generation of noise-like rectangular pulse was investigated systematically in an Er–Yb co-doped fiber laser based on an intra-cavity coupler with different coupling ratios.When the coupling ratio was 5/95,stable mode-locked pulses could be obtained with the pulse packet duration tunable from 4.86 ns to 80 ns.The repetition frequency was 1.186 MHz with the output spectrum centered at 1.6μm.The average output power and single pulse energy reached a record 1.43 W and1.21μJ,respectively.Pulse characteristics under different coupling ratios(5/95,10/90,20/80,30/70,40/60)were also presented and discussed.展开更多
As metallic nanoparticles are arranged to form a 2D periodic nano-array,the coupling of the localized surface plasmonic resonance(LSPR)results in the well-known phenomenon of surface lattice resonances(SLRs).We theore...As metallic nanoparticles are arranged to form a 2D periodic nano-array,the coupling of the localized surface plasmonic resonance(LSPR)results in the well-known phenomenon of surface lattice resonances(SLRs).We theoretically investigate the SLR effect of the circular nano-array fabricated on the fiber tips.The difference between the 2D periodic and circular periodic arrays results in different resonant characteristics.For both structures,the resonant peaks due to the SLRs shift continuously as the array structures are adjusted.For some specific arrangements,the circular nano-array may generate a single sharp resonant peak with extremely high enhancement,which originates from the collective coupling of the whole array.More interestingly,the spatial pattern of the vector near-field corresponding to the sharp peak is independent of the polarization state of the incidence,facilitating its excitation and regulation.This finding may be helpful for designing multifunctional all-fiber devices.展开更多
We propose a 2.1μm high-energy dissipative soliton resonant(DSR)fiber laser system based on a mode-locked seed laser and dual-stage amplifiers.In the seed laser,the nonlinear amplifying loop mirror technique is emplo...We propose a 2.1μm high-energy dissipative soliton resonant(DSR)fiber laser system based on a mode-locked seed laser and dual-stage amplifiers.In the seed laser,the nonlinear amplifying loop mirror technique is employed to realize mode-locking.The utilization of an in-band pump scheme and long gain fiber enables effectively exciting 2.1μm pulses.A section of ultra-high numerical aperture fiber(UHNAF)with normal dispersion and high nonlinearity and an output coupler with a large coupling ratio are used to achieve a high-energy DSR system.By optimizing the UHNAF length to55 m,a 2103.7 nm,88.1 nJ DSR laser with a 3-dB spectral bandwidth of 0.48 nm and a pulse width of 17.1 ns is obtained under a proper intracavity polarization state and pump power.The output power and conversion efficiency are 0.233W and 4.57%,respectively,both an order of magnitude higher than those of previously reported holmium-doped DSR seed lasers.Thanks to the high output power and nanosecond pulse width of the seed laser,the average power of the DSR laser is linearly scaled up to 50.4 W via a dual-stage master oscillator power amplifier system.The 3-dB spectral bandwidth broadens slightly to 0.52 nm,and no distortion occurs in the amplified pulse waveform.The corresponding pulse energy reaches 19.1μJ,which is the highest pulse energy in a holmium-doped mode-locked fiber laser system to the best of our knowledge.Such a 2.1μm,high-energy DSR laser with relatively wide pulse width has prospective applications in mid-infrared nonlinear frequency conversion.展开更多
It is well-established that waves are inhomogeneous in a lossy isotropic medium, and the validation of the classical Snell's law is still questionable for light refraction at the dissipative and dispersive interfa...It is well-established that waves are inhomogeneous in a lossy isotropic medium, and the validation of the classical Snell's law is still questionable for light refraction at the dissipative and dispersive interface. With high absorption, direct experimental investigation is rather difficult due to the extremely short penetration depth; i.e., the skin depth. In this paper, a simple and unified description of this issue is proposed, which can be applied to both materials with anomalous dispersion and in the Drude region. The gradient ▽_k~ω is found to be incident angle θ_i-dependent, and the direction of the group velocity may deviate significantly from the phase velocity due to the loss induced permittivity structure. The physics behind the negative refraction effect is explained, and a novel loss induced super-prism effect is also predicted.展开更多
In this work, we investigate suppressing mode instability in detail by varying the seed power in a large mode area all-fiber amplifier with a fiber core diameter of 25 μm. The transverse mode instability(TMI) thresho...In this work, we investigate suppressing mode instability in detail by varying the seed power in a large mode area all-fiber amplifier with a fiber core diameter of 25 μm. The transverse mode instability(TMI) thresholds are systematically measured for different seed power. Our experimental results reveal that increasing the seed power has a positive influence on enhancing the output power before the TMI effect appears, and finally the TMI threshold is approximately doubled from1030 W to 2280 W when the seed power is increased from 27 W to 875 W. Almost 84.7% slope efficiency is reached with different seed power before the TMI threshold power. During our operation, we also find that in this type of LMA fiber the beam quality of the amplifier is degraded gradually instead of a sudden change as the pump power increases.展开更多
The superfluorescent Yb-doped fiber source operating near 980 nm is studied. The design requirement is theoretically discussed aiming to suppress the amplified spontaneous emission around 1030 nm in the 980-nm superfl...The superfluorescent Yb-doped fiber source operating near 980 nm is studied. The design requirement is theoretically discussed aiming to suppress the amplified spontaneous emission around 1030 nm in the 980-nm superfluorescent fiber source. Based on the theoretical study, a multi-Watt, all-fiber, bi-directional, pumped, superfluorescent source operating near 980 nm is designed and experimentally demonstrated for the first time, to the best of our knowledge. The recorded 8.38-W combined output power is obtained with a 3-dB bandwidth about 3.5 nm. The power scaling of the 980-nm superfluorescent fiber source is limited by the parasitic laser oscillation.展开更多
An all-fiber dumbbell-shaped dual-amplifier mode-locked Er-doped laser that can function in dissipative soliton resonance(DSR)regime is demonstrated.A nonlinear optical loop mirror(NOLM)and a nonlinear amplifying loop...An all-fiber dumbbell-shaped dual-amplifier mode-locked Er-doped laser that can function in dissipative soliton resonance(DSR)regime is demonstrated.A nonlinear optical loop mirror(NOLM)and a nonlinear amplifying loop mirror(NALM)are employed to initiate the mode-locking pulses.Unlike conventional single-amplifier structure,the output peak power of which remains unchanged when pump power is varied,the proposed structure allows its output peak power to be tuned by changing the pump power of the two amplifiers while the pulse duration is directly determined by the amplifier of nonlinear amplifying loop mirror.The entire distribution maps of peak power and pulse duration clearly demonstrate that the two amplifiers are related to each other,and they supply directly a guideline for designing tunable peak power DSR fiber laser.Pulse width can change from 800 ps to 2.6 ns and peak power varies from 13 W to 27 W.To the best of our knowledge,the peak power tunable DSR pulse is observed for the first time in dumbbell-shaped Er-doped all-fiber mode-locked lasers.展开更多
We fabricate a pair of fiber Bragg gratings(FBGs)by a visible femtosecond laser phase mask scanning technique on passive large-mode-area double-cladding fibers for multi-kilowatt fiber oscillators.The bandwidth of hig...We fabricate a pair of fiber Bragg gratings(FBGs)by a visible femtosecond laser phase mask scanning technique on passive large-mode-area double-cladding fibers for multi-kilowatt fiber oscillators.The bandwidth of high-reflection(HR)and lowreflection(LR)FBG is~1.6 nm and 0.3 nm,respectively.The reflection of the HR-FBG is higher than 99%,and that of the LR-FBG is about 10%.A bidirectional pumped all-fiber oscillator is constructed using this pair of FBGs,a record output power of 5027 W located in the signal core is achieved with a slope efficiency of~82.1%,and the beam quality factor M2is measured to be~1.6 at the maximum power.The FBGs are simply fixed on a water cooling plate without a special package,and the thermal efficiency of the HR-FBG and the LR-FBG is 2.76℃/kW and 1℃/kW,respectively.Our research provides an effective solution for robust high-power all-fiber laser oscillators.展开更多
Fiber gas lasers based on gas-filled hollow-core fibers(HCFs)perfectly combine the advantages of fiber lasers and gas lasers and have obtained fast development in the past years.However,stable and efficient coupling o...Fiber gas lasers based on gas-filled hollow-core fibers(HCFs)perfectly combine the advantages of fiber lasers and gas lasers and have obtained fast development in the past years.However,stable and efficient coupling of high-power pump lasers into the HCFs is one of the key problems to be solved.In this paper,we study the coupling of high-power continuous wave fiber lasers into anti-resonant HCFs through an end-cap.By optimizing the splicing parameters,a maximum laser power of 1167 W was injected into the 1-m-long HCFs,and 1021W was obtained at the output end,giving a total transmission efficiency of〜87.5%.A more than 1 h test showed the stability of such a coupling method.Meanwhile,the laser beam quality was well maintained.This work opens new opportunities for stable and highly efficient coupling of high-power lasers into HCFs,which is significant for its applications in many other fields besides high-power fiber gas lasers,such as high-power laser delivering.展开更多
Narrowband microwave generation with tuneable frequency is demonstrated by illuminating a photoconductive semiconductor switch(PCSS)with a burst-mode fibre laser.The whole system is composed of a high-power linearly p...Narrowband microwave generation with tuneable frequency is demonstrated by illuminating a photoconductive semiconductor switch(PCSS)with a burst-mode fibre laser.The whole system is composed of a high-power linearly polarized burst-mode pulsed fibre laser and a linear-state PCSS.To obtain a high-performance microwave signal,a desired envelope of burst is necessary and a pulse pre-compensation technique is adopted to avoid envelope distortion induced by the gain-saturation effect.Resulting from the technique,homogenous peak power distribution in each burst is ensured.The maximum energy of the laser burst pulse reaches 200μJ with a burst duration of 100 ns at the average power of 10 W,corresponding to a peak power of 4 kW.When the PCSS is illuminated by the burst-mode fibre laser,narrowband microwave generation with tuneable frequency(0.80-1.12 GHz)is obtained with a power up to 300 W.To the best of the authors’knowledge,it is the first demonstration of frequency-tuneable narrowband microwave generation based on a fibre laser.The high-power burst-mode fibre laser reported here has great potential for generating high-power arbitrary microwave signals for a great deal of applicable demands such as smart adaptive radar and intelligent high-power microwave systems.展开更多
We propose a novel model to explain the physical process of the thermally induced core laser leakage(TICLL) effect in a high power co-pumped ytterbium doped fiber(YDF) amplifier. This model considers the thermally ind...We propose a novel model to explain the physical process of the thermally induced core laser leakage(TICLL) effect in a high power co-pumped ytterbium doped fiber(YDF) amplifier. This model considers the thermally induced mode bending loss decrease and the thermally induced mode instability(TMI) in the coiled YDF, and is further used to reproduce the TICLL effect in the high power co-pumped step-index 20/400 fiber amplifier. Besides, the TICLL effect in the copumping scheme and counter-pumping scheme is compared. The result proves that the TICLL effect is caused by the combined effect of the thermally induced mode bending loss decrease and the TMI, and could be mitigated by adopting the counter-pumping scheme. To our best knowledge, this is the first theoretical explanation of the TICLL effect in high power fiber amplifier.展开更多
The high-power mode-programmable orbital angular momentum(OAM)beam has attracted significant attention in a wide range of applications,such as long-distance optical communication,nonlinear frequency conversion,and bea...The high-power mode-programmable orbital angular momentum(OAM)beam has attracted significant attention in a wide range of applications,such as long-distance optical communication,nonlinear frequency conversion,and beam shaping.Coherent beam combining(CBC)of an optical phased array(OPA)can offer a promising solution for both generating the high-power OAM beam and rapidly switching the OAM modes.However,achieving real-time phase noise locking and formation of desired phase structures in a high-power CBC system faces significant challenges.Here,an internal phase-sensing technique was utilized to generate the high-power OAM beam,which effectively mitigated thermal effects and eliminated the need for large optical devices.An OPA with six elements was employed for experimental demonstration.The first effective generation of over 1.5 kW mode-programmable OAM beam in a continuous-wave domain was presented.Moreover,the results demonstrated that the generated OAM beam could be modulated with multiple dimensions.The topological charge can be switched in real time from-1 to-2.Notably,this OAM beam emitter could function as an OAM beam copier by easily transforming a single OAM beam into an OAM beam array.More importantly,a comprehensive analysis was conducted on power scaling,mode switching speed,and expansion of OAM modes.Additionally,the system’s compact design enabled it to function as a packageable OAM beam emitter.Owing to the advantages of having high power and programmable modes with multiple dimension modulation in phase structures and intensity distribution,this work can pave the way for producing high-power structured light beams and advancing their applications.展开更多
The average power of fiber lasers has been scaled deeply into the kW regime in the past years. However, stimulated Raman scattering(SRS) is still a major factor limiting further power scaling. Here, we have demonstrat...The average power of fiber lasers has been scaled deeply into the kW regime in the past years. However, stimulated Raman scattering(SRS) is still a major factor limiting further power scaling. Here, we have demonstrated for the first time, to the best of our knowledge, the suppression of SRS in a half 10 kW tandem pumping fiber amplifier using chirped and tilted fiber Bragg gratings(CTFBGs). With specially self-designed and manufactured CTFBGs inserted between the seed laser and the amplifier stage, a maximum SRS suppression ratio of >15 dB in spectrum is observed with no reduction in laser efficiency. With one CTFBG, the effective output power is improved to3.9 kW with a beam quality M2 factor of ~1.7 from <3.5 k W with an M2 factor of >2; with two CTFBGs, the effective laser power reaches 4.2 kW with an increasing ratio of 20% and an M2 factor of ~1.8, and further power improvement is limited by the power and performance of the 1018 nm pump sources. This work provides an effective SRS suppression method for high-power all-fiber lasers, which is useful for further power scaling of these systems.展开更多
High-peak-power transform-limited narrow-linewidth nanosecond all-fiber lasers are desired in a range of applications.However,their linewidths will be broadened by self-phase modulation(SPM).We propose a novel concept...High-peak-power transform-limited narrow-linewidth nanosecond all-fiber lasers are desired in a range of applications.However,their linewidths will be broadened by self-phase modulation(SPM).We propose a novel concept that generates transform-limited laser pulses by temporally shaping the pulse seed.The impact of the pulse shape on SPM-induced spectral broadening was studied numerically and experimentally.It was found theoretically that the square-shape pulsed laser is immune to SPM-induced spectral broadening.Based on this principle,we built a high-peak-power,linearly polarized,square-shape nanosecond all-fiber laser in a master oscillator power amplifier(MOPA)configuration.Stimulated Brillouin scattering(SBS)limited peak powers of 4.02 kW,5.06 kW,6.52 kW and 9.30 kW were obtained at pulse widths of 8 ns,7 ns,6 ns and 5 ns.Thanks to the square-shape pulsed seed,the linewidths at maximum peak power remained at 129.5 MHz,137.6 MHz,156.2 MHz and 200.1 MHz,respectively,close to the transform-limited values of110.8 MHz,126.6 MHz,147.7 MHz and 177.3 MHz.展开更多
Side pumping combiners are widely used in fiber laser schemes for their high coupling efficiency, low insertion loss, and multi-point pumping capability. However, side pumping combiners perform differently in coupling...Side pumping combiners are widely used in fiber laser schemes for their high coupling efficiency, low insertion loss, and multi-point pumping capability. However, side pumping combiners perform differently in coupling efficiency when pumping with a laser diode(LD) and a high-brightness 1018 nm Yb-doped fiber laser(YDFL). In this paper, for the first time, to the best of our knowledge, we investigated the different parameters to fabricate the(2 + 1) × 1 combiner with high coupling efficiency when pumping with an LD and a YDFL, respectively. After optimization, the maximum coupled pump power from one single-pump port of the combiner was 1200 W and 2730 W when pumping with a LD and a YDFL, respectively.展开更多
We report here an ultra-broadband linearly polarized(LP)LP01-LP11 mode converter operating at 1μm based on a long period fiber grating(LPFG)fabricated in a conventional two-mode fiber(TMF)by a line-focused CO2 laser....We report here an ultra-broadband linearly polarized(LP)LP01-LP11 mode converter operating at 1μm based on a long period fiber grating(LPFG)fabricated in a conventional two-mode fiber(TMF)by a line-focused CO2 laser.The measured 3d B bandwidth is about 240 nm,which is the broadest bandwidth for such fiber mode converters.The maximum conversion efficiency between the LP01 and LP11 modes is>99%over the range of 1000 nm to 1085 nm,almost covering the whole emission band of Yb3+,which is useful for further power scaling of high-power fiber lasers operating at the 1μm band.展开更多
We demonstrate efficient supercontinuum generation extending into mid-infrared spectral range by pumping a twomode As2S3 fiber in the normal dispersion regime. The As2S3 fiber is fusion spliced to the pigtail of a nea...We demonstrate efficient supercontinuum generation extending into mid-infrared spectral range by pumping a twomode As2S3 fiber in the normal dispersion regime. The As2S3 fiber is fusion spliced to the pigtail of a near-infrared supercontinuum pump source with ultra-low splicing loss of 0.125 dB, which enables a monolithic all-fiber mid-infrared supercontinuum source. By two-mode excitation and mixed-mode cascaded stimulated Raman scattering, a supercontinuum spanning from 1.8 μm to 4.2 μm is obtained. Over 70% of the supercontinuum power is converted to wavelengths beyond2.4 μm. This is the first experimental report with respect to the multimode mid-infrared supercontinuum generation in a step-index two-mode chalcogenide fiber.展开更多
Fiber-based mid-infrared(MIR)supercontinuum(SC)sources benefit from their spectral brightness and spatial coherence that are needed for many applications,such as spectroscopy and metrology.In this paper,an SC spanning...Fiber-based mid-infrared(MIR)supercontinuum(SC)sources benefit from their spectral brightness and spatial coherence that are needed for many applications,such as spectroscopy and metrology.In this paper,an SC spanning from 2μm to 6μm is demonstrated in cascaded ZrF4-BaF2-LaF3-AlF3-NaF(ZBLAN)and As2Se3 step-index fibers.The pump source is a ZBLAN fiber-based MIR SC laser with abundant high-peak-power soliton pulses between 3000 nm and 4200 nm.By concatenating the ZBLAN fiber and the As2 Se3 fiber,efficient cascading red-shifts are obtained in the normal dispersion region of the As2 Se3 fiber.The spectral behavior of cascaded SC generation shows that the long-wavelength proportion of MIR SC generated in the ZBLAN fiber plays a critical role for further spectral extension in the As2 Se3 fiber.展开更多
In this work,a high-energy and high peak power chirped pulse amplifcation system with near difraction-limited beam quality based on tapered confned-doped fber(TCF)is experimentally demonstrated.The TCF has a core nume...In this work,a high-energy and high peak power chirped pulse amplifcation system with near difraction-limited beam quality based on tapered confned-doped fber(TCF)is experimentally demonstrated.The TCF has a core numerical aperture of 0.07 with core/cladding diameter of 35/250µm at the thin end and 56/400μm at the thick end.With a backward-pumping confguration,a maximum single pulse energy of 177.9μJ at a repetition rate of 504 kHz is realized,corresponding to an average power of 89.7 W.Through partially compensating for the accumulated nonlinear phase during the amplifcation process via adjusting the high order dispersion of the stretching chirped fber Bragg grating,the duration of the amplifed pulse is compressed to 401 fs with a pulse energy of 126.3μJ and a peak power of 207 MW,which to the best of our knowledge represents the highest peak power ever reported from a monolithic ultrafast fber laser.At the highest energy,the polarization extinction ratio and the M2 factor were respectively measured to be~19 dB and 1.20.In addition,the corresponding intensity noise properties as well as the short-and long-term stability were also examined,verifying a stable operation of the system.It is believed that the demonstrated laser source could fnd important applications in,for example,advanced manufacturing and photomedicine.展开更多
基金the National Natural Science Foundation of China(Grant Nos.62005313 and 62061136013).
文摘Impact of amplified spontaneous emission(ASE)noise on the stimulated Raman scattering(SRS)threshold of highpower fiber amplifiers is demonstrated numerically through a spectral evolution approach.The simulation results confirm that ASE noise in the Raman wavelength band could reduce the SRS threshold of high-power fiber amplifiers significantly.As for ASE noise originated the main amplifier,it becomes stronger and reduces the SRS threshold at shorter operation wavelength below 1052 nm.As for ASE noise originated from the seed laser,it reduces the SRS threshold at different operation wavelength under the condition that the Raman ratio is over-90 dB in the seed laser.The theoretical method and results in this work could provide a well reference to extend the operation wavelength of high-power fiber lasers.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61435009,61235008,and 61405254)
文摘Generation of noise-like rectangular pulse was investigated systematically in an Er–Yb co-doped fiber laser based on an intra-cavity coupler with different coupling ratios.When the coupling ratio was 5/95,stable mode-locked pulses could be obtained with the pulse packet duration tunable from 4.86 ns to 80 ns.The repetition frequency was 1.186 MHz with the output spectrum centered at 1.6μm.The average output power and single pulse energy reached a record 1.43 W and1.21μJ,respectively.Pulse characteristics under different coupling ratios(5/95,10/90,20/80,30/70,40/60)were also presented and discussed.
基金supported by the National Natural Science Foundation of China (Grant No.12174085)the Fundamental Research Funds for the Central Universities (Grant No.B220202018)+1 种基金the Changzhou Science and Technology Program (Grant No.CJ20210130)CAS Key Laboratory of Nanodevices and Applications (Grant No.21YZ03)。
文摘As metallic nanoparticles are arranged to form a 2D periodic nano-array,the coupling of the localized surface plasmonic resonance(LSPR)results in the well-known phenomenon of surface lattice resonances(SLRs).We theoretically investigate the SLR effect of the circular nano-array fabricated on the fiber tips.The difference between the 2D periodic and circular periodic arrays results in different resonant characteristics.For both structures,the resonant peaks due to the SLRs shift continuously as the array structures are adjusted.For some specific arrangements,the circular nano-array may generate a single sharp resonant peak with extremely high enhancement,which originates from the collective coupling of the whole array.More interestingly,the spatial pattern of the vector near-field corresponding to the sharp peak is independent of the polarization state of the incidence,facilitating its excitation and regulation.This finding may be helpful for designing multifunctional all-fiber devices.
基金supported by the State Key Laboratory of Pulsed Power Laser Technology,China(Nos.SKL2021KF07 and SKL2020ZR06)the Postgraduate Scientific Research Innovation Project of Hunan Province,China(Nos.CX2022078 and CX2022080)
文摘We propose a 2.1μm high-energy dissipative soliton resonant(DSR)fiber laser system based on a mode-locked seed laser and dual-stage amplifiers.In the seed laser,the nonlinear amplifying loop mirror technique is employed to realize mode-locking.The utilization of an in-band pump scheme and long gain fiber enables effectively exciting 2.1μm pulses.A section of ultra-high numerical aperture fiber(UHNAF)with normal dispersion and high nonlinearity and an output coupler with a large coupling ratio are used to achieve a high-energy DSR system.By optimizing the UHNAF length to55 m,a 2103.7 nm,88.1 nJ DSR laser with a 3-dB spectral bandwidth of 0.48 nm and a pulse width of 17.1 ns is obtained under a proper intracavity polarization state and pump power.The output power and conversion efficiency are 0.233W and 4.57%,respectively,both an order of magnitude higher than those of previously reported holmium-doped DSR seed lasers.Thanks to the high output power and nanosecond pulse width of the seed laser,the average power of the DSR laser is linearly scaled up to 50.4 W via a dual-stage master oscillator power amplifier system.The 3-dB spectral bandwidth broadens slightly to 0.52 nm,and no distortion occurs in the amplified pulse waveform.The corresponding pulse energy reaches 19.1μJ,which is the highest pulse energy in a holmium-doped mode-locked fiber laser system to the best of our knowledge.Such a 2.1μm,high-energy DSR laser with relatively wide pulse width has prospective applications in mid-infrared nonlinear frequency conversion.
基金Project supported by the China Postdoctoral Science Foundation(Grant No.2016M601586)the National Natural Science Foundation of China(Grant No.11404092)the Opening Funding of Hunan Provincial Key Laboratory of High Energy Laser Technology,China(Grant No.GNJGJS07)
文摘It is well-established that waves are inhomogeneous in a lossy isotropic medium, and the validation of the classical Snell's law is still questionable for light refraction at the dissipative and dispersive interface. With high absorption, direct experimental investigation is rather difficult due to the extremely short penetration depth; i.e., the skin depth. In this paper, a simple and unified description of this issue is proposed, which can be applied to both materials with anomalous dispersion and in the Drude region. The gradient ▽_k~ω is found to be incident angle θ_i-dependent, and the direction of the group velocity may deviate significantly from the phase velocity due to the loss induced permittivity structure. The physics behind the negative refraction effect is explained, and a novel loss induced super-prism effect is also predicted.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61735007 and 61505260)
文摘In this work, we investigate suppressing mode instability in detail by varying the seed power in a large mode area all-fiber amplifier with a fiber core diameter of 25 μm. The transverse mode instability(TMI) thresholds are systematically measured for different seed power. Our experimental results reveal that increasing the seed power has a positive influence on enhancing the output power before the TMI effect appears, and finally the TMI threshold is approximately doubled from1030 W to 2280 W when the seed power is increased from 27 W to 875 W. Almost 84.7% slope efficiency is reached with different seed power before the TMI threshold power. During our operation, we also find that in this type of LMA fiber the beam quality of the amplifier is degraded gradually instead of a sudden change as the pump power increases.
基金Project supported by the National Natural Science Foundation of China(Grant No.61405249)
文摘The superfluorescent Yb-doped fiber source operating near 980 nm is studied. The design requirement is theoretically discussed aiming to suppress the amplified spontaneous emission around 1030 nm in the 980-nm superfluorescent fiber source. Based on the theoretical study, a multi-Watt, all-fiber, bi-directional, pumped, superfluorescent source operating near 980 nm is designed and experimentally demonstrated for the first time, to the best of our knowledge. The recorded 8.38-W combined output power is obtained with a 3-dB bandwidth about 3.5 nm. The power scaling of the 980-nm superfluorescent fiber source is limited by the parasitic laser oscillation.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61435009,61235008,and 61405254).
文摘An all-fiber dumbbell-shaped dual-amplifier mode-locked Er-doped laser that can function in dissipative soliton resonance(DSR)regime is demonstrated.A nonlinear optical loop mirror(NOLM)and a nonlinear amplifying loop mirror(NALM)are employed to initiate the mode-locking pulses.Unlike conventional single-amplifier structure,the output peak power of which remains unchanged when pump power is varied,the proposed structure allows its output peak power to be tuned by changing the pump power of the two amplifiers while the pulse duration is directly determined by the amplifier of nonlinear amplifying loop mirror.The entire distribution maps of peak power and pulse duration clearly demonstrate that the two amplifiers are related to each other,and they supply directly a guideline for designing tunable peak power DSR fiber laser.Pulse width can change from 800 ps to 2.6 ns and peak power varies from 13 W to 27 W.To the best of our knowledge,the peak power tunable DSR pulse is observed for the first time in dumbbell-shaped Er-doped all-fiber mode-locked lasers.
基金supported by the National Natural Science Foundation of China(NSFC)(Nos.11974427 and 12004431)State Key Laboratory of Pulsed Power Laser(Nos.SKL-2020ZR05 and SKL2021ZR01)Postgraduate Scientific Research Innovation Project of Hunan Province(No.CX20200046)。
文摘We fabricate a pair of fiber Bragg gratings(FBGs)by a visible femtosecond laser phase mask scanning technique on passive large-mode-area double-cladding fibers for multi-kilowatt fiber oscillators.The bandwidth of high-reflection(HR)and lowreflection(LR)FBG is~1.6 nm and 0.3 nm,respectively.The reflection of the HR-FBG is higher than 99%,and that of the LR-FBG is about 10%.A bidirectional pumped all-fiber oscillator is constructed using this pair of FBGs,a record output power of 5027 W located in the signal core is achieved with a slope efficiency of~82.1%,and the beam quality factor M2is measured to be~1.6 at the maximum power.The FBGs are simply fixed on a water cooling plate without a special package,and the thermal efficiency of the HR-FBG and the LR-FBG is 2.76℃/kW and 1℃/kW,respectively.Our research provides an effective solution for robust high-power all-fiber laser oscillators.
基金This work was supported by the Outstanding Youth Science Fund of Hunan Provincial Natural Science Foundation(No.2019JJ20023)National Natural Science Foundation of China(NSFC)(Nos.11974427 and 12004431)+2 种基金State Key Laboratory of Pulsed Power Laser(Nos.SKL2020ZR05 and SKL2021ZR01)Science and Technology Innovation Program of Hunan Province(No.2021RC4027)Postgraduate Scientific Research Innovation Project of Hunan Province(No.CX20200017).
文摘Fiber gas lasers based on gas-filled hollow-core fibers(HCFs)perfectly combine the advantages of fiber lasers and gas lasers and have obtained fast development in the past years.However,stable and efficient coupling of high-power pump lasers into the HCFs is one of the key problems to be solved.In this paper,we study the coupling of high-power continuous wave fiber lasers into anti-resonant HCFs through an end-cap.By optimizing the splicing parameters,a maximum laser power of 1167 W was injected into the 1-m-long HCFs,and 1021W was obtained at the output end,giving a total transmission efficiency of〜87.5%.A more than 1 h test showed the stability of such a coupling method.Meanwhile,the laser beam quality was well maintained.This work opens new opportunities for stable and highly efficient coupling of high-power lasers into HCFs,which is significant for its applications in many other fields besides high-power fiber gas lasers,such as high-power laser delivering.
文摘Narrowband microwave generation with tuneable frequency is demonstrated by illuminating a photoconductive semiconductor switch(PCSS)with a burst-mode fibre laser.The whole system is composed of a high-power linearly polarized burst-mode pulsed fibre laser and a linear-state PCSS.To obtain a high-performance microwave signal,a desired envelope of burst is necessary and a pulse pre-compensation technique is adopted to avoid envelope distortion induced by the gain-saturation effect.Resulting from the technique,homogenous peak power distribution in each burst is ensured.The maximum energy of the laser burst pulse reaches 200μJ with a burst duration of 100 ns at the average power of 10 W,corresponding to a peak power of 4 kW.When the PCSS is illuminated by the burst-mode fibre laser,narrowband microwave generation with tuneable frequency(0.80-1.12 GHz)is obtained with a power up to 300 W.To the best of the authors’knowledge,it is the first demonstration of frequency-tuneable narrowband microwave generation based on a fibre laser.The high-power burst-mode fibre laser reported here has great potential for generating high-power arbitrary microwave signals for a great deal of applicable demands such as smart adaptive radar and intelligent high-power microwave systems.
基金the support of National Natural Science Foundation of China(NSFC)(No.61605246)
文摘We propose a novel model to explain the physical process of the thermally induced core laser leakage(TICLL) effect in a high power co-pumped ytterbium doped fiber(YDF) amplifier. This model considers the thermally induced mode bending loss decrease and the thermally induced mode instability(TMI) in the coiled YDF, and is further used to reproduce the TICLL effect in the high power co-pumped step-index 20/400 fiber amplifier. Besides, the TICLL effect in the copumping scheme and counter-pumping scheme is compared. The result proves that the TICLL effect is caused by the combined effect of the thermally induced mode bending loss decrease and the TMI, and could be mitigated by adopting the counter-pumping scheme. To our best knowledge, this is the first theoretical explanation of the TICLL effect in high power fiber amplifier.
基金supported by the National Natural Science Foundation of China(Nos.62275272 and 62075242)Natural ScienceFoundationofHunanProvince,China(No.2019JJ10005)+1 种基金Training Program for Excellent Young Innovators of Changsha(No.kq2206003)Postgraduate Scientific Research Innovation Project of Hunan Province(No.QL20220013)。
文摘The high-power mode-programmable orbital angular momentum(OAM)beam has attracted significant attention in a wide range of applications,such as long-distance optical communication,nonlinear frequency conversion,and beam shaping.Coherent beam combining(CBC)of an optical phased array(OPA)can offer a promising solution for both generating the high-power OAM beam and rapidly switching the OAM modes.However,achieving real-time phase noise locking and formation of desired phase structures in a high-power CBC system faces significant challenges.Here,an internal phase-sensing technique was utilized to generate the high-power OAM beam,which effectively mitigated thermal effects and eliminated the need for large optical devices.An OPA with six elements was employed for experimental demonstration.The first effective generation of over 1.5 kW mode-programmable OAM beam in a continuous-wave domain was presented.Moreover,the results demonstrated that the generated OAM beam could be modulated with multiple dimensions.The topological charge can be switched in real time from-1 to-2.Notably,this OAM beam emitter could function as an OAM beam copier by easily transforming a single OAM beam into an OAM beam array.More importantly,a comprehensive analysis was conducted on power scaling,mode switching speed,and expansion of OAM modes.Additionally,the system’s compact design enabled it to function as a packageable OAM beam emitter.Owing to the advantages of having high power and programmable modes with multiple dimension modulation in phase structures and intensity distribution,this work can pave the way for producing high-power structured light beams and advancing their applications.
基金National Natural Science Foundation of China(NSFC)(11274385)
文摘The average power of fiber lasers has been scaled deeply into the kW regime in the past years. However, stimulated Raman scattering(SRS) is still a major factor limiting further power scaling. Here, we have demonstrated for the first time, to the best of our knowledge, the suppression of SRS in a half 10 kW tandem pumping fiber amplifier using chirped and tilted fiber Bragg gratings(CTFBGs). With specially self-designed and manufactured CTFBGs inserted between the seed laser and the amplifier stage, a maximum SRS suppression ratio of >15 dB in spectrum is observed with no reduction in laser efficiency. With one CTFBG, the effective output power is improved to3.9 kW with a beam quality M2 factor of ~1.7 from <3.5 k W with an M2 factor of >2; with two CTFBGs, the effective laser power reaches 4.2 kW with an increasing ratio of 20% and an M2 factor of ~1.8, and further power improvement is limited by the power and performance of the 1018 nm pump sources. This work provides an effective SRS suppression method for high-power all-fiber lasers, which is useful for further power scaling of these systems.
基金supported by the National Natural Science Foundation of China(Nos.61705265 and 61705264)the National Key R&D Programme of China(No.2017YFF0104603)the China Postdoctoral Science Foundation(No.2017M620070)
文摘High-peak-power transform-limited narrow-linewidth nanosecond all-fiber lasers are desired in a range of applications.However,their linewidths will be broadened by self-phase modulation(SPM).We propose a novel concept that generates transform-limited laser pulses by temporally shaping the pulse seed.The impact of the pulse shape on SPM-induced spectral broadening was studied numerically and experimentally.It was found theoretically that the square-shape pulsed laser is immune to SPM-induced spectral broadening.Based on this principle,we built a high-peak-power,linearly polarized,square-shape nanosecond all-fiber laser in a master oscillator power amplifier(MOPA)configuration.Stimulated Brillouin scattering(SBS)limited peak powers of 4.02 kW,5.06 kW,6.52 kW and 9.30 kW were obtained at pulse widths of 8 ns,7 ns,6 ns and 5 ns.Thanks to the square-shape pulsed seed,the linewidths at maximum peak power remained at 129.5 MHz,137.6 MHz,156.2 MHz and 200.1 MHz,respectively,close to the transform-limited values of110.8 MHz,126.6 MHz,147.7 MHz and 177.3 MHz.
文摘Side pumping combiners are widely used in fiber laser schemes for their high coupling efficiency, low insertion loss, and multi-point pumping capability. However, side pumping combiners perform differently in coupling efficiency when pumping with a laser diode(LD) and a high-brightness 1018 nm Yb-doped fiber laser(YDFL). In this paper, for the first time, to the best of our knowledge, we investigated the different parameters to fabricate the(2 + 1) × 1 combiner with high coupling efficiency when pumping with an LD and a YDFL, respectively. After optimization, the maximum coupled pump power from one single-pump port of the combiner was 1200 W and 2730 W when pumping with a LD and a YDFL, respectively.
基金supported by the Outstanding Youth Science Fund of Natural Science Foundation of Hunan Province(No.2019JJ20023)the National Natural Science Foundation of China(No.11974427)
文摘We report here an ultra-broadband linearly polarized(LP)LP01-LP11 mode converter operating at 1μm based on a long period fiber grating(LPFG)fabricated in a conventional two-mode fiber(TMF)by a line-focused CO2 laser.The measured 3d B bandwidth is about 240 nm,which is the broadest bandwidth for such fiber mode converters.The maximum conversion efficiency between the LP01 and LP11 modes is>99%over the range of 1000 nm to 1085 nm,almost covering the whole emission band of Yb3+,which is useful for further power scaling of high-power fiber lasers operating at the 1μm band.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61435009,61235008,and 61405254)
文摘We demonstrate efficient supercontinuum generation extending into mid-infrared spectral range by pumping a twomode As2S3 fiber in the normal dispersion regime. The As2S3 fiber is fusion spliced to the pigtail of a near-infrared supercontinuum pump source with ultra-low splicing loss of 0.125 dB, which enables a monolithic all-fiber mid-infrared supercontinuum source. By two-mode excitation and mixed-mode cascaded stimulated Raman scattering, a supercontinuum spanning from 1.8 μm to 4.2 μm is obtained. Over 70% of the supercontinuum power is converted to wavelengths beyond2.4 μm. This is the first experimental report with respect to the multimode mid-infrared supercontinuum generation in a step-index two-mode chalcogenide fiber.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61435009,61235008,and 61405254)the Fund from China Scholarship Council(Grant No.201803170210)Hunan Provincial Innovation Foundation for Postgraduate(Grant No.CX2018B008)
文摘Fiber-based mid-infrared(MIR)supercontinuum(SC)sources benefit from their spectral brightness and spatial coherence that are needed for many applications,such as spectroscopy and metrology.In this paper,an SC spanning from 2μm to 6μm is demonstrated in cascaded ZrF4-BaF2-LaF3-AlF3-NaF(ZBLAN)and As2Se3 step-index fibers.The pump source is a ZBLAN fiber-based MIR SC laser with abundant high-peak-power soliton pulses between 3000 nm and 4200 nm.By concatenating the ZBLAN fiber and the As2 Se3 fiber,efficient cascading red-shifts are obtained in the normal dispersion region of the As2 Se3 fiber.The spectral behavior of cascaded SC generation shows that the long-wavelength proportion of MIR SC generated in the ZBLAN fiber plays a critical role for further spectral extension in the As2 Se3 fiber.
基金the Director Fund of State Key Laboratory of Pulsed Power Laser Technology(No.SKL2020ZR02)the Postgraduate Scientifc Research Innovation Project of Hunan Province(No.QL20220007).
文摘In this work,a high-energy and high peak power chirped pulse amplifcation system with near difraction-limited beam quality based on tapered confned-doped fber(TCF)is experimentally demonstrated.The TCF has a core numerical aperture of 0.07 with core/cladding diameter of 35/250µm at the thin end and 56/400μm at the thick end.With a backward-pumping confguration,a maximum single pulse energy of 177.9μJ at a repetition rate of 504 kHz is realized,corresponding to an average power of 89.7 W.Through partially compensating for the accumulated nonlinear phase during the amplifcation process via adjusting the high order dispersion of the stretching chirped fber Bragg grating,the duration of the amplifed pulse is compressed to 401 fs with a pulse energy of 126.3μJ and a peak power of 207 MW,which to the best of our knowledge represents the highest peak power ever reported from a monolithic ultrafast fber laser.At the highest energy,the polarization extinction ratio and the M2 factor were respectively measured to be~19 dB and 1.20.In addition,the corresponding intensity noise properties as well as the short-and long-term stability were also examined,verifying a stable operation of the system.It is believed that the demonstrated laser source could fnd important applications in,for example,advanced manufacturing and photomedicine.