Metal–N–C single‐atom catalysts,mostly prepared from pyrolysis of metalorganic precursors,are widely used in heterogeneous electrocatalysis.Since metal sites with diverse local structures coexist in this type of ma...Metal–N–C single‐atom catalysts,mostly prepared from pyrolysis of metalorganic precursors,are widely used in heterogeneous electrocatalysis.Since metal sites with diverse local structures coexist in this type of material and it is challenging to characterize the local structure,a reliable structure–property relationship is difficult to establish.Conjugated macrocyclic complexes adsorbed on carbon support are well‐defined models to mimic the singleatom catalysts.Metal–N_(4) site with four electroneutral pyridine‐type ligands embedded in a graphene layer is the most commonly proposed structure of the active site of single‐atom catalysts,but its molecular counterpart has not been reported.In this work,we synthesized the conjugated macrocyclic complexes with a metal center(Co,Fe,or Ni)coordinated with four electroneutral pyridinic ligands as model catalysts for CO_(2) electroreduction.For comparison,the complexes with anionic quadri‐pyridine macrocyclic ligand were also prepared.The Co complex with the electroneutral ligand expressed a turnover frequency of CO formation more than an order of magnitude higher than that of the Co complex with the anionic ligand.Constrained ab initio molecular dynamics simulations based on the well‐defined structures of the model catalysts indicate that the Co complex with the electroneutral ligand possesses a stronger ability to mediate electron transfer from carbon to CO_(2).展开更多
This special column hosts four contributions in celebration of great success of the International Symposium on Novel Catalysts for Energy and Environmental Issues,which was held in Sapporo on June 30 and July 1,2016.T...This special column hosts four contributions in celebration of great success of the International Symposium on Novel Catalysts for Energy and Environmental Issues,which was held in Sapporo on June 30 and July 1,2016.This was one of satellite展开更多
Highly dispersed palladium nanoparticles were synthesized in the presence of immobilized ionic liquid on mesoporous silica SBA-15.PdNPs(2.4 nm)_me-Im@SBA-15 catalyst was prepared by the reduction using NaBH_4 as the r...Highly dispersed palladium nanoparticles were synthesized in the presence of immobilized ionic liquid on mesoporous silica SBA-15.PdNPs(2.4 nm)_me-Im@SBA-15 catalyst was prepared by the reduction using NaBH_4 as the reducing agent with controlled feed rate and has been investigated as ligand-free catalyst for Suzuki–Miyaura cross-coupling reaction at room temperature in aqueous solution under air.PdNPs catalyst was also prepared in situ from PdCl4_me-Im@SBA-15 during the reaction and demonstrated high activity and stability towards nitrobenzene hydrogenation at high temperature. Both catalysts were reusable at least for four recycle processes without significant loss in activity with simple procedure. The catalysts were characterized by TEM, EXAFS, FTIR and XPS.展开更多
Thermal decomposition of formic acid on SiO2, CeO2 and γ-Al2O3 was studied as an elementary step of reverse water–gas shit reaction（RWGS） over supported Au catalysts. γ-Al2O3 showed the highest CO selectivity amo...Thermal decomposition of formic acid on SiO2, CeO2 and γ-Al2O3 was studied as an elementary step of reverse water–gas shit reaction（RWGS） over supported Au catalysts. γ-Al2O3 showed the highest CO selectivity among the tested oxides in the decomposition of formic acid. Infrared spectroscopy showed the formation of four formate species on γ-Al2O3： three η~1-type and one μ~2-type species, and these formates decomposed to CO at 473 K or higher. Au-loaded γ-Al2O3 samples were prepared by a depositionprecipitation method and used as catalysts for RWGS. The supported Au catalyst gave CO with high selectivity over 99% from CO2 and H2, which is attributed to the formation of formates on Au and subsequent decomposition to CO on γ-Al2O3.展开更多
Polyoxymethylene dimethyl ethers(OMEs)with physical properties similar to those of diesel has received significant attention as green additives for soot emission suppression.Herein,series of SO_(4)^(2-)/ZrO_(2)-TiO_(2...Polyoxymethylene dimethyl ethers(OMEs)with physical properties similar to those of diesel has received significant attention as green additives for soot emission suppression.Herein,series of SO_(4)^(2-)/ZrO_(2)-TiO_(2)catalysts were developed for OMEs production from dimethoxymethane(DMM)and1,3,5-trioxane through sequential formaldehyde monomer insertion into C-O bond of DMM.Not Lewis but Bronsted acid sites were identified to be active for the decomposition of 1,3,5-trioxane into formaldehyde unit,however,both of them are effective for the chain propagation of DMM via formaldehyde unit insertion into C-O bond.Kinetic studies indicated each chain growth step exhibited the same parameters and activation barrier on corresponding Bronsted and Lewis acid sites due to the same reaction mechanism and very similar chemical structure of OMEs.Also,the catalytic stability investigation suggested the deactivation behavior was derived from the carbon deposition,and the decay factor could be exponentially correlated with the amount of coke accumulation.展开更多
Opportunity to harmonize aspects of oxygen reduction reaction(ORR)performance and structure,and morphology,as well as composition,is urgent for the commercialization of proton exchange membrane fuel cells.Herein,we de...Opportunity to harmonize aspects of oxygen reduction reaction(ORR)performance and structure,and morphology,as well as composition,is urgent for the commercialization of proton exchange membrane fuel cells.Herein,we demonstrate the design and synthesis of a functionalized-supported-Pt catalyst(Pt@HNC)featuring a hollow nitrogen-modified dodecahedral carbon substrate obtained by a stress-induced-shrink tailoring route.The as-obtained Pt@HNC catalyst possesses enhanced ORR per-formance,in particular with half-wave potential,mass activity(MA)and specific activity,which greatly exceed the commercial Pt/C.The density functional theory(DFT)calculations further confirmed that the charge redistribution induced by the electronegativity differences improved the electron interaction between Pt and HNC support.The optimized electronic structure of Pt weakens the reaction energy barrier on the Pt@HNC surface and adsorption of^(*)OH species,thus cooperatively improving the intrinsic activity toward ORR.Additionally,our work indeed provides a guide for the future design of functional nanomaterials in the field of catalysts and clean energy.展开更多
PtCo nanoalloys(NAs)deposited on carbon black are emerging as robust electrocatalysts for addressing the sluggish kinetic issue of oxygen reduction reaction(ORR).However,developing a simple and low-cost method to synt...PtCo nanoalloys(NAs)deposited on carbon black are emerging as robust electrocatalysts for addressing the sluggish kinetic issue of oxygen reduction reaction(ORR).However,developing a simple and low-cost method to synthesize PtCo/C with excellent performance is still a great challenge.In this work,a one-pot method was used to successfully obtain the PtCo NAs on commercial carbon supports of acetylene black and Ketjenblack ECP600JD,respectively.Compared with those grown on Ketjenblack ECP600JD,the PtCo NAs grown on acetylene black exhibited higher electrochemical surface area(ECSA)and mass activity(MA),which may be attributed to the different particle sizes of PtCo NAs,distinct hydrophilicity,electroconductivity and charge distribution between the carbon supports and PtCo NAs.Our study provides valuable insights into the optimal design of carbon-supported ORR electrocatalysts with exceptional activity and durability.展开更多
In recent decades,the environmental protection and long-term sustainability have become the focus of attention due to the increasing pollution generated by the intense industrialization.To overcome these issues,enviro...In recent decades,the environmental protection and long-term sustainability have become the focus of attention due to the increasing pollution generated by the intense industrialization.To overcome these issues,environmental catalysis has increasingly been used to solve the negative impact of pollutants emission on the global environment and human health.Supported platinum-metal-group(PGM)materials are commonly utilized as the state-of-the-art catalysts to eliminate gaseous pollutants but large quantities of PGMs are required.By comparison,single-atom site catalysts(SACs)have attracted much attention in catalysis owing to their 100%atom efficiency and unique catalytic performances towards various reactions.Over the past decade,we have witnessed burgeoning interests of SACs in heterogeneous catalysis.However,to the best of our knowledge,the systematic summary and analysis of SACs in catalytic elimination of environmental pollutants has not yet been reported.In this paper,we summarize and discuss the environmental catalysis applications of SACs.Particular focus was paid to automotive and stationary emission control,including model reaction(CO oxidation,NO reduction and hydrocarbon oxidation),overall reaction(three-way catalytic and diesel oxidation reaction),elimination of volatile organic compounds(formaldehyde,benzene,and toluene),and removal/decomposition of other pollutants(Hg0 and SO3).Perspectives related to further challenges,directions and design strategies of single-atom site catalysts in environmental catalysis were also provided.展开更多
Dimethoxymethane(DMM),a diesel blend fuel,is being researched with high interest recently due to its unique fuel properties.It is commercially produced via a two step-process of methanol oxidation to make formaldehyde...Dimethoxymethane(DMM),a diesel blend fuel,is being researched with high interest recently due to its unique fuel properties.It is commercially produced via a two step-process of methanol oxidation to make formaldehyde,followed by its condensation with methanol.This study presents a one-pot method of DMM synthesis from methanol mediated carbon dioxide hydrogenation over novel heterogeneous catalysts.The effect of catalyst pore structure was investigated by synthesizing 3 wt%Ru over novel hierarchical zeolite beta(HBEASX)and comparing against Ru doped commercial zeolite beta(CBEA)and desilicated hierarchical zeolite beta(HBZDS).The results showed that 3%Ru/HBEASX provided the best activity for DMM production due to its large average pore size.It also showed the decisive role of SiO_(2)/Al_(2)O_(3)molar ratio,with SiO_(2)/Al_(2)O_(3)=75 providing the highest DMM yield of 13.2 mmol/gcat.LMeOH with ca.100%selectivity.The activity of 3%Ru/HBEAS3 after 5 recycle steps demonstrated the reusability of this catalyst.展开更多
A novel pH gradient methodology was used to synthesise a series of Cu–ZrO2 catalysts containing different quantities of Cu and Zr.All of the catalysts were highly selective to the desired product,γ-valerolactone, an...A novel pH gradient methodology was used to synthesise a series of Cu–ZrO2 catalysts containing different quantities of Cu and Zr.All of the catalysts were highly selective to the desired product,γ-valerolactone, and are considerably more stable than Cu–ZrO2 catalysts prepared by other co-precipitation methods for this reaction.Characterisation and further investigation of these catalysts by XRD, BET, SEM and XPS provided insight into the nature of the catalytic active site and the physicochemical properties that lead to catalyst stability.We consider the active site to be the interface between Cu/CuOxand ZrOx and that lattice Cu species assist with the dispersion of surface Cu through the promotion of a strong metal support interaction.This enhanced understanding of the active site and roles of lattice and surface Cu will assist with future catalyst design.As such, we conclude that the activity of Cu–ZrO2 catalysts in this reaction is dictated by the quantity of Cu–Zr interface sites.展开更多
Two series of bimetallic Ni-Co catalysts and corresponding monometallic catalysts with ca. 20 wt% metal loading were evaluated in hydrodeoxygenation (HDO) of phenol as a model compound for bio-oil. The bimetallic cata...Two series of bimetallic Ni-Co catalysts and corresponding monometallic catalysts with ca. 20 wt% metal loading were evaluated in hydrodeoxygenation (HDO) of phenol as a model compound for bio-oil. The bimetallic catalysts outperformed the corresponding monometallic catalyst in terms of conversion and cyclohexane selectivity. This could be attributed to the formation of Ni-Co alloy, which caused a decrease in metal particle size and stabilized Ni active sites in the near surface region. The balanced combination of formed Ni-Co alloy with acidity from supports allowed performing all individual steps in the reaction network toward desired products at high rate. Consequently, the two best-performing catalysts were tested in HDO of wood based bio-oil, showing that the bimetallic catalyst 10Ni10Co/HZSM-5 was more effective than 20Ni/HZSM-5 in terms of degree of deoxygenation and upgraded bio-oil yield. These findings might open an opportunity for development of a novel cheap but effective catalyst for a key step in the process chain from biomass to renewable liquid fuels.展开更多
Supported metal-group materials are commonly utilized as state-of-the-art catalysts in industry.Atomic-sites catalysts(ASCs)have attracted increasing attention in catalysis owing to their 100%atom efficiency and uniqu...Supported metal-group materials are commonly utilized as state-of-the-art catalysts in industry.Atomic-sites catalysts(ASCs)have attracted increasing attention in catalysis owing to their 100%atom efficiency and unique catalytic performances toward various reactions.In particular,atomic dispersion of bulk and nano metals has become the focus of research and development in the synthesis of ASCs.Over the past decade,burgeoning interests have been paid to atomic dispersion in ASCs and their applications in catalysis.However,to the best of our knowledge,the systematic summary and analysis of atomic dispersion were rarely reported.In this review,recently developed ASCs by atomic dispersion were discussed in terms of synthetic atmosphere,driving force,applications in thermal catalytic reactions.Perspectives related to challenges and directions as well as design strategies of ASCs in atomic dispersion were also provided.展开更多
Ethylene carbonate(EC) liquid and its vapor-liquid interface were investigated using a combination of molecular dynamics(MD)simulation and vibrational IR, Raman and sum frequency generation(SFG)spectroscopies. The MD ...Ethylene carbonate(EC) liquid and its vapor-liquid interface were investigated using a combination of molecular dynamics(MD)simulation and vibrational IR, Raman and sum frequency generation(SFG)spectroscopies. The MD simulation was performed with a flexible and polarizable model of the EC molecule newly developed for the computation of vibrational spectra. The internal vibration of the model was described on the basis of the harmonic couplings of vibrational modes, including the anharmonicity and Fermi resonance coupling of C=O stretching. The polarizable model was represented by the charge response kernel(CRK),which is based on ab initio molecular orbital calculations and can be readily applied to other systems. The flexible and polarizable model can also accurately reproduce the structural and thermodynamic properties of EC liquid. Meanwhile, a comprehensive set of vibrational spectra of EC liquid, including the IR and Raman spectra of the bulk liquid as well as the SFG spectra of the liquid interface, were experimentally measured and reported. The set of experimental vibrational spectra provided valuable information for validating the model, and the MD simulation using the model comprehensively elucidates the observed vibrational IR, Raman, and SFG spectra of EC liquid. Further MD analysis of the interface region revealed that EC molecules tend to orientate themselves with the C=O bond parallel to the interface. The MD simulation explains the positive Im[χ^((2))](ssp) band of the C=O stretching region in the SFG spectrum in terms of the preferential orientation of EC molecules at the interface. This work also elucidates the distinct lineshapes of the C=O stretching band in the IR, Raman, and SFG spectra. The lineshapes of the C=O band are split by the Fermi resonance of the C=O fundamental and the overtone of skeletal stretching. The Fermi resonance of C=O stretching was fully analyzed using the empirical potential parameter shift analysis(EPSA) method. The apparently different lineshapes of the C=O stretching band in the IR, Raman, and SFG spectra were attributed to the frequency shift of the C=O fundamental in different solvation environments in the bulk liquid and at the interface. This work proposes a systematic procedure for investigating the interface structure and SFG spectra, including general modeling procedure based on ab initio calculations, validation of the model using available experimental data, and simultaneous analysis of molecular orientation and SFG spectra through MD trajectories. The proposed procedure provides microscopic information on the EC interface in this study, and can be further applied to investigate other interface systems, such as liquid-liquid and solid-liquid interfaces.展开更多
Metal oxides have been used as the supports for heterogeneous catalysis formany years,but they still suffer from coking in some high-temperature applications.The main reasons for coking are the uncontrollable dissocia...Metal oxides have been used as the supports for heterogeneous catalysis formany years,but they still suffer from coking in some high-temperature applications.The main reasons for coking are the uncontrollable dissociation of C-H and the overbalance between carbon deposition and removal.Herein,we find a boron nitride(BN)-immobilized Ni catalyst shows unprecedented coking resistance in dry reforming of methane via the incomplete decomposition of methane.Unlike the Ni-based catalysts supported by traditional metal oxides,BN-supported Ni accelerates the first C-H dissociation while inhibiting the breaking of the final C-H bond;hence,the suppression of the complete decomposition of methane thoroughly addresses the coking issue.This work reveals the fundamental reason for the coking resistance over BN-supported Ni catalysts is selective activation of the C-H bond,which can provide an inspiring idea for other applications.展开更多
We report herein that a commercially available CeO2 is an active and reusable catalyst for the C3-selective alkenylation of oxindole with aldehydes under solvent-free conditions. This catalytic method is generally app...We report herein that a commercially available CeO2 is an active and reusable catalyst for the C3-selective alkenylation of oxindole with aldehydes under solvent-free conditions. This catalytic method is generally applicable to different aromatic and aliphatic aldehydes, giving 3-alkyledene-oxindoles in high yields(87%–99%) and high stereoselectivities(79%–93% to E-isomers). This is the first example of the catalytic synthesis of 3-alkenyl-oxindoles from oxindole and various aliphatic aldehydes. The Lewis acid-base interaction between Lewis acid sites on CeO2 and benzaldehyde was studied by in situ IR. The structure-activity relationship study using CeO2 catalysts with different sizes suggests that defect-free CeO2 surface is the active site for this reaction.展开更多
An effective strategy was proposed to control the formation of the interfacial bonding between Ru and molybdenum oxide support to stabilize the Ru atoms with the aim to enhance the hydrogen evolution reaction(HER)acti...An effective strategy was proposed to control the formation of the interfacial bonding between Ru and molybdenum oxide support to stabilize the Ru atoms with the aim to enhance the hydrogen evolution reaction(HER)activity of the resultant catalysts in alkaline medium.The different interfacial chemical bonds,including Ru–O,Ru–O–Mo,and mixed Ru–Mo/Ru–O–Mo,were prepared using an induced activation strategy by controlling the composition of reducing agents in the calcination process.And the regulation mechanism of the interfacial chemical bonds in molybdenum oxide supported Ru catalysts for optimizing HER activity was investigated by density functional theory(DFT)and experimental studies.We found that a controlled interfacial chemical Ru–O–Mo bonding in Ru-MoO_(2)/C manifests a 12-fold activity increase in catalyzing the hydrogen evolution reaction relative to the conventional metal/metal oxide catalyst(Ru-O-MoO_(2)/C).In a bifunctional effect,the interfacial chemical Ru-O-Mo sites promoted the dissociation of water and the production of hydrogen intermediates that were then adsorbed on the nearby Ru surfaces and recombined into molecular hydrogen.As compared,the nearby Ru surfaces in Ru–Mo bonding have weak adsorption capacity for the generation of these hydrogen intermediates,resulting in a 5-fold increase HER activity for Ru-Mo-MoO_(2)/C catalyst compared with Ru-O-MoO_(2)/C.展开更多
Fundamental knowledge of structure-activity correlations for heterogeneous single-atom catalysts(SACs)is essential in guiding catalytic design.While linear scaling relations are powerful for predicting the performance...Fundamental knowledge of structure-activity correlations for heterogeneous single-atom catalysts(SACs)is essential in guiding catalytic design.While linear scaling relations are powerful for predicting the performance of traditionalmetal catalysts,they appear to fail with the involvement of SACs.Comparing the catalytic CO oxidation activity of different atomically dispersed metals(3d,4d,and 5d)in conjunction with computational modeling enabled us to establish multiple scaling relations between the activity and simply calculated descriptors.展开更多
Potassium titanate nanostructures were synthesised by hydrothermal treatment of TiO2 （P25） in KOH and H2O2. As-produced powders were characterised by scanning electron microscopy, energy-dispersive X-ray spectroscop...Potassium titanate nanostructures were synthesised by hydrothermal treatment of TiO2 （P25） in KOH and H2O2. As-produced powders were characterised by scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy, X-ray diffraction, and nitrogen adsorption-desorption methods. Longitudinally-oriented-wire-like structures with a length up to several micrometres and diameters ranging from 10 to 30 nm were obtained. Larger size fibrous nanowires resulting from the hydrotherrnal treatment showed high affinity in adsorbing crystal violet （CV）, which was mainly due to their high surface area. The photocatalytic bleaching of CV solution revealed that the wires are photoactive under ultraviolet light irradiation. Macroporous nanowires are considered as effective adsorbents of CV, capable of photocatalvtic degradation, and they can be easily separated from the solution by settling.展开更多
The progress of modern chemistry heavily relies on the profound comprehension and sophisticated manipulation of reactive intermediates,such as carbanions,carbocations,radicals,and carbenes.Each of these species posses...The progress of modern chemistry heavily relies on the profound comprehension and sophisticated manipulation of reactive intermediates,such as carbanions,carbocations,radicals,and carbenes.Each of these species possesses a distinct pattern of reactivity,which contributes significantly to the advancements of modern chemistry.In this context,the exploration and application of the carbon dioxide radical anion(CO_(2)^(·-))in organic synthesis have garnered significant interest from both the academia and industry.展开更多
Engineering of defects in semiconductors provides an effective protocol for improving photocatalytic N_(2) conversion efficiency.This review focuses on the state-of-the-art progress in defect engineering of photocatal...Engineering of defects in semiconductors provides an effective protocol for improving photocatalytic N_(2) conversion efficiency.This review focuses on the state-of-the-art progress in defect engineering of photocatalysts for the N_(2) reduction toward ammonia.The basic principles and mechanisms of thermal catalyzed and photon-induced N_(2) reduction are first concisely recapped,including relevant properties of the N_(2) molecule,reaction pathways,and NH3 quantification methods.Subsequently,defect classification,synthesis strategies,and identification techniques are compendiously summarized.Advances of in situ characterization techniques for monitoring defect state during the N_(2) reduction process are also described.Especially,various surface defect strategies and their critical roles in improving the N_(2) photoreduction performance are highlighted,including surface vacancies(i.e.,anionic vacancies and cationic vacancies),heteroatom doping(i.e.,metal element doping and nonmetal element doping),and atomically defined surface sites.Finally,future opportunities and challenges as well as perspectives on further development of defect-engineered photocatalysts for the nitrogen reduction to ammonia are presented.It is expected that this review can provide a profound guidance for more specialized design of defect-engineered catalysts with high activity and stability for nitrogen photochemical fixation.展开更多
基金Guangdong Grants,Grant/Award Number:2021ZT09C064National Natural Science Foundation of China,Grant/Award Numbers:22272073,22373045,22373045+2 种基金Shenzhen Science and Technology Program,Grant/Award Numbers:JCYJ20210324104414039,JCYJ20220818100410023,KCXST20221021111207017Guangdong Basic and Applied Basic Research Foundation,Grant/Award Numbers:2021A1515110360,2022A1515011976China Postdoctoral Science Foundation,Grant/Award Number:2022M721469。
文摘Metal–N–C single‐atom catalysts,mostly prepared from pyrolysis of metalorganic precursors,are widely used in heterogeneous electrocatalysis.Since metal sites with diverse local structures coexist in this type of material and it is challenging to characterize the local structure,a reliable structure–property relationship is difficult to establish.Conjugated macrocyclic complexes adsorbed on carbon support are well‐defined models to mimic the singleatom catalysts.Metal–N_(4) site with four electroneutral pyridine‐type ligands embedded in a graphene layer is the most commonly proposed structure of the active site of single‐atom catalysts,but its molecular counterpart has not been reported.In this work,we synthesized the conjugated macrocyclic complexes with a metal center(Co,Fe,or Ni)coordinated with four electroneutral pyridinic ligands as model catalysts for CO_(2) electroreduction.For comparison,the complexes with anionic quadri‐pyridine macrocyclic ligand were also prepared.The Co complex with the electroneutral ligand expressed a turnover frequency of CO formation more than an order of magnitude higher than that of the Co complex with the anionic ligand.Constrained ab initio molecular dynamics simulations based on the well‐defined structures of the model catalysts indicate that the Co complex with the electroneutral ligand possesses a stronger ability to mediate electron transfer from carbon to CO_(2).
文摘This special column hosts four contributions in celebration of great success of the International Symposium on Novel Catalysts for Energy and Environmental Issues,which was held in Sapporo on June 30 and July 1,2016.This was one of satellite
基金the financial support from the Institute for Quantum Chemical Exploration(IQCE)
文摘Highly dispersed palladium nanoparticles were synthesized in the presence of immobilized ionic liquid on mesoporous silica SBA-15.PdNPs(2.4 nm)_me-Im@SBA-15 catalyst was prepared by the reduction using NaBH_4 as the reducing agent with controlled feed rate and has been investigated as ligand-free catalyst for Suzuki–Miyaura cross-coupling reaction at room temperature in aqueous solution under air.PdNPs catalyst was also prepared in situ from PdCl4_me-Im@SBA-15 during the reaction and demonstrated high activity and stability towards nitrobenzene hydrogenation at high temperature. Both catalysts were reusable at least for four recycle processes without significant loss in activity with simple procedure. The catalysts were characterized by TEM, EXAFS, FTIR and XPS.
文摘Thermal decomposition of formic acid on SiO2, CeO2 and γ-Al2O3 was studied as an elementary step of reverse water–gas shit reaction（RWGS） over supported Au catalysts. γ-Al2O3 showed the highest CO selectivity among the tested oxides in the decomposition of formic acid. Infrared spectroscopy showed the formation of four formate species on γ-Al2O3： three η~1-type and one μ~2-type species, and these formates decomposed to CO at 473 K or higher. Au-loaded γ-Al2O3 samples were prepared by a depositionprecipitation method and used as catalysts for RWGS. The supported Au catalyst gave CO with high selectivity over 99% from CO2 and H2, which is attributed to the formation of formates on Au and subsequent decomposition to CO on γ-Al2O3.
基金the fund from the National Natural Science Foundation of China(22208349)the Innovation Academy for Green Manufacture(Chinese Academy of Sciences,IAGM2020C20)+1 种基金Shandong Provincial Natural Science Youth Fund(ZR2022QB244)Japan Society for the Promotion of Science(P20345)。
文摘Polyoxymethylene dimethyl ethers(OMEs)with physical properties similar to those of diesel has received significant attention as green additives for soot emission suppression.Herein,series of SO_(4)^(2-)/ZrO_(2)-TiO_(2)catalysts were developed for OMEs production from dimethoxymethane(DMM)and1,3,5-trioxane through sequential formaldehyde monomer insertion into C-O bond of DMM.Not Lewis but Bronsted acid sites were identified to be active for the decomposition of 1,3,5-trioxane into formaldehyde unit,however,both of them are effective for the chain propagation of DMM via formaldehyde unit insertion into C-O bond.Kinetic studies indicated each chain growth step exhibited the same parameters and activation barrier on corresponding Bronsted and Lewis acid sites due to the same reaction mechanism and very similar chemical structure of OMEs.Also,the catalytic stability investigation suggested the deactivation behavior was derived from the carbon deposition,and the decay factor could be exponentially correlated with the amount of coke accumulation.
基金financially supported by the Natural Science Foundation of China(Nos.22169005,22068009 and22262006)the Natural Science Special Foundation of Guizhou University(Nos.202017 Special Post A and 702775203301)+1 种基金the Science and Technology Support Project of Guizhou Provincial Science and Technology Department(Nos.ZK[2023]050,ZK[2023]403)The Open Project of Institute of Dual-carbon and New Energy Technology Innovation and Development of Guizhou Province(No.DCRE-2023-06)。
文摘Opportunity to harmonize aspects of oxygen reduction reaction(ORR)performance and structure,and morphology,as well as composition,is urgent for the commercialization of proton exchange membrane fuel cells.Herein,we demonstrate the design and synthesis of a functionalized-supported-Pt catalyst(Pt@HNC)featuring a hollow nitrogen-modified dodecahedral carbon substrate obtained by a stress-induced-shrink tailoring route.The as-obtained Pt@HNC catalyst possesses enhanced ORR per-formance,in particular with half-wave potential,mass activity(MA)and specific activity,which greatly exceed the commercial Pt/C.The density functional theory(DFT)calculations further confirmed that the charge redistribution induced by the electronegativity differences improved the electron interaction between Pt and HNC support.The optimized electronic structure of Pt weakens the reaction energy barrier on the Pt@HNC surface and adsorption of^(*)OH species,thus cooperatively improving the intrinsic activity toward ORR.Additionally,our work indeed provides a guide for the future design of functional nanomaterials in the field of catalysts and clean energy.
基金supported by National Natural Science Foundation of China(No.22102086)the Shandong Provincial Natural Science Fund for Excellent Young Scientists Fund Program(Overseas),China(No.2023HWYQ-059)+5 种基金the Shandong Provincial Natural Science Foundation,China(No.ZR2022MB028)the Major Fundamental Research Project of Shandong Natural Science Fund,China(No.ZR2023ZD54)the Taishan Scholar Program of Shandong Province,China(No.tsqnz20221113)the Fundamental Research Funds for the Central Universities,China(Nos.862201013152,202412008)the Youth Innovation Plan of Shandong Province,China(No.2022KJ054)the Alexander von Humboldt Foundation.
文摘PtCo nanoalloys(NAs)deposited on carbon black are emerging as robust electrocatalysts for addressing the sluggish kinetic issue of oxygen reduction reaction(ORR).However,developing a simple and low-cost method to synthesize PtCo/C with excellent performance is still a great challenge.In this work,a one-pot method was used to successfully obtain the PtCo NAs on commercial carbon supports of acetylene black and Ketjenblack ECP600JD,respectively.Compared with those grown on Ketjenblack ECP600JD,the PtCo NAs grown on acetylene black exhibited higher electrochemical surface area(ECSA)and mass activity(MA),which may be attributed to the different particle sizes of PtCo NAs,distinct hydrophilicity,electroconductivity and charge distribution between the carbon supports and PtCo NAs.Our study provides valuable insights into the optimal design of carbon-supported ORR electrocatalysts with exceptional activity and durability.
基金This work was supported by the China Postdoctoral Science Foundation(No.2020M670355)the National Key R&D Program of China(No.2018YFA0702003)+2 种基金the National Natural Science Foundation of China(Nos.21890383,21671117,and 21871159)the Science and Technology Key Project of Guangdong Province of China(No.2020B010188002)Beijing Municipal Science&Technology Commission(No.Z191100007219003).
文摘In recent decades,the environmental protection and long-term sustainability have become the focus of attention due to the increasing pollution generated by the intense industrialization.To overcome these issues,environmental catalysis has increasingly been used to solve the negative impact of pollutants emission on the global environment and human health.Supported platinum-metal-group(PGM)materials are commonly utilized as the state-of-the-art catalysts to eliminate gaseous pollutants but large quantities of PGMs are required.By comparison,single-atom site catalysts(SACs)have attracted much attention in catalysis owing to their 100%atom efficiency and unique catalytic performances towards various reactions.Over the past decade,we have witnessed burgeoning interests of SACs in heterogeneous catalysis.However,to the best of our knowledge,the systematic summary and analysis of SACs in catalytic elimination of environmental pollutants has not yet been reported.In this paper,we summarize and discuss the environmental catalysis applications of SACs.Particular focus was paid to automotive and stationary emission control,including model reaction(CO oxidation,NO reduction and hydrocarbon oxidation),overall reaction(three-way catalytic and diesel oxidation reaction),elimination of volatile organic compounds(formaldehyde,benzene,and toluene),and removal/decomposition of other pollutants(Hg0 and SO3).Perspectives related to further challenges,directions and design strategies of single-atom site catalysts in environmental catalysis were also provided.
基金Australian Research Council(Grant No.DP170104017)for the financial support of this projectAT and AS received financial support from the Institute for Catalysis,Hokkaido University as part of their Strategic Research Fellowship grant schemesupported by the Cooperative Research Program of Institute for Catalysis,Hokkaido University(Proposal No.19A1005)。
文摘Dimethoxymethane(DMM),a diesel blend fuel,is being researched with high interest recently due to its unique fuel properties.It is commercially produced via a two step-process of methanol oxidation to make formaldehyde,followed by its condensation with methanol.This study presents a one-pot method of DMM synthesis from methanol mediated carbon dioxide hydrogenation over novel heterogeneous catalysts.The effect of catalyst pore structure was investigated by synthesizing 3 wt%Ru over novel hierarchical zeolite beta(HBEASX)and comparing against Ru doped commercial zeolite beta(CBEA)and desilicated hierarchical zeolite beta(HBZDS).The results showed that 3%Ru/HBEASX provided the best activity for DMM production due to its large average pore size.It also showed the decisive role of SiO_(2)/Al_(2)O_(3)molar ratio,with SiO_(2)/Al_(2)O_(3)=75 providing the highest DMM yield of 13.2 mmol/gcat.LMeOH with ca.100%selectivity.The activity of 3%Ru/HBEAS3 after 5 recycle steps demonstrated the reusability of this catalyst.
基金financially supported by the European Union FP7 NMP project NOVACAM (Novel cheap and abundant EU-Japan604319)
文摘A novel pH gradient methodology was used to synthesise a series of Cu–ZrO2 catalysts containing different quantities of Cu and Zr.All of the catalysts were highly selective to the desired product,γ-valerolactone, and are considerably more stable than Cu–ZrO2 catalysts prepared by other co-precipitation methods for this reaction.Characterisation and further investigation of these catalysts by XRD, BET, SEM and XPS provided insight into the nature of the catalytic active site and the physicochemical properties that lead to catalyst stability.We consider the active site to be the interface between Cu/CuOxand ZrOx and that lattice Cu species assist with the dispersion of surface Cu through the promotion of a strong metal support interaction.This enhanced understanding of the active site and roles of lattice and surface Cu will assist with future catalyst design.As such, we conclude that the activity of Cu–ZrO2 catalysts in this reaction is dictated by the quantity of Cu–Zr interface sites.
文摘Two series of bimetallic Ni-Co catalysts and corresponding monometallic catalysts with ca. 20 wt% metal loading were evaluated in hydrodeoxygenation (HDO) of phenol as a model compound for bio-oil. The bimetallic catalysts outperformed the corresponding monometallic catalyst in terms of conversion and cyclohexane selectivity. This could be attributed to the formation of Ni-Co alloy, which caused a decrease in metal particle size and stabilized Ni active sites in the near surface region. The balanced combination of formed Ni-Co alloy with acidity from supports allowed performing all individual steps in the reaction network toward desired products at high rate. Consequently, the two best-performing catalysts were tested in HDO of wood based bio-oil, showing that the bimetallic catalyst 10Ni10Co/HZSM-5 was more effective than 20Ni/HZSM-5 in terms of degree of deoxygenation and upgraded bio-oil yield. These findings might open an opportunity for development of a novel cheap but effective catalyst for a key step in the process chain from biomass to renewable liquid fuels.
基金Japan Society of Promotion of Science(JSPS)(Nos.P21354 and P22049).
文摘Supported metal-group materials are commonly utilized as state-of-the-art catalysts in industry.Atomic-sites catalysts(ASCs)have attracted increasing attention in catalysis owing to their 100%atom efficiency and unique catalytic performances toward various reactions.In particular,atomic dispersion of bulk and nano metals has become the focus of research and development in the synthesis of ASCs.Over the past decade,burgeoning interests have been paid to atomic dispersion in ASCs and their applications in catalysis.However,to the best of our knowledge,the systematic summary and analysis of atomic dispersion were rarely reported.In this review,recently developed ASCs by atomic dispersion were discussed in terms of synthetic atmosphere,driving force,applications in thermal catalytic reactions.Perspectives related to challenges and directions as well as design strategies of ASCs in atomic dispersion were also provided.
基金supported by Elements Strategy Initiative for Catalysts and Batteries,Kyoto University,Cooperative Research Program of Institute for Catalysis,Hokkaido University,Japan and the Grants-in-Aids(JP25104003,JP26288003)by the Japan Society for the Promotion of Science(JSPS)and Ministry of Education,Culture,Sports and Technology(MEXT),Japan
文摘Ethylene carbonate(EC) liquid and its vapor-liquid interface were investigated using a combination of molecular dynamics(MD)simulation and vibrational IR, Raman and sum frequency generation(SFG)spectroscopies. The MD simulation was performed with a flexible and polarizable model of the EC molecule newly developed for the computation of vibrational spectra. The internal vibration of the model was described on the basis of the harmonic couplings of vibrational modes, including the anharmonicity and Fermi resonance coupling of C=O stretching. The polarizable model was represented by the charge response kernel(CRK),which is based on ab initio molecular orbital calculations and can be readily applied to other systems. The flexible and polarizable model can also accurately reproduce the structural and thermodynamic properties of EC liquid. Meanwhile, a comprehensive set of vibrational spectra of EC liquid, including the IR and Raman spectra of the bulk liquid as well as the SFG spectra of the liquid interface, were experimentally measured and reported. The set of experimental vibrational spectra provided valuable information for validating the model, and the MD simulation using the model comprehensively elucidates the observed vibrational IR, Raman, and SFG spectra of EC liquid. Further MD analysis of the interface region revealed that EC molecules tend to orientate themselves with the C=O bond parallel to the interface. The MD simulation explains the positive Im[χ^((2))](ssp) band of the C=O stretching region in the SFG spectrum in terms of the preferential orientation of EC molecules at the interface. This work also elucidates the distinct lineshapes of the C=O stretching band in the IR, Raman, and SFG spectra. The lineshapes of the C=O band are split by the Fermi resonance of the C=O fundamental and the overtone of skeletal stretching. The Fermi resonance of C=O stretching was fully analyzed using the empirical potential parameter shift analysis(EPSA) method. The apparently different lineshapes of the C=O stretching band in the IR, Raman, and SFG spectra were attributed to the frequency shift of the C=O fundamental in different solvation environments in the bulk liquid and at the interface. This work proposes a systematic procedure for investigating the interface structure and SFG spectra, including general modeling procedure based on ab initio calculations, validation of the model using available experimental data, and simultaneous analysis of molecular orientation and SFG spectra through MD trajectories. The proposed procedure provides microscopic information on the EC interface in this study, and can be further applied to investigate other interface systems, such as liquid-liquid and solid-liquid interfaces.
基金financial support from the National Natural Science Foundation of China(grant nos.22006098 and 22125604)Shanghai Sailing Program(grant no.20YF1413300)+1 种基金J.D.thanks Dr.Lei Xie at Fudan University for fruitful discussions.The computational part is also supported by the JSPS KAKENHI(grant no.JP20K05217)the supercomputer at RCCS(grant no.22-IMS-C002),Okazaki,Japan.
文摘Metal oxides have been used as the supports for heterogeneous catalysis formany years,but they still suffer from coking in some high-temperature applications.The main reasons for coking are the uncontrollable dissociation of C-H and the overbalance between carbon deposition and removal.Herein,we find a boron nitride(BN)-immobilized Ni catalyst shows unprecedented coking resistance in dry reforming of methane via the incomplete decomposition of methane.Unlike the Ni-based catalysts supported by traditional metal oxides,BN-supported Ni accelerates the first C-H dissociation while inhibiting the breaking of the final C-H bond;hence,the suppression of the complete decomposition of methane thoroughly addresses the coking issue.This work reveals the fundamental reason for the coking resistance over BN-supported Ni catalysts is selective activation of the C-H bond,which can provide an inspiring idea for other applications.
基金supported financially by a series of JSPS KAKENHI grants:17H01341,18K14051,18K14057,and 19K05556 from the Japan Society for the Promotion of Science(JSPS)by the Japanese Ministry of Education,Culture,Sports,Science,and Technology(MEXT)within the projects"Integrated Research Consortium on Chemical Sciences(IRCCS)"and"Elements Strategy Initiative to Form Core Research Center"by the JST-CREST project JPMJCR17J3。
文摘We report herein that a commercially available CeO2 is an active and reusable catalyst for the C3-selective alkenylation of oxindole with aldehydes under solvent-free conditions. This catalytic method is generally applicable to different aromatic and aliphatic aldehydes, giving 3-alkyledene-oxindoles in high yields(87%–99%) and high stereoselectivities(79%–93% to E-isomers). This is the first example of the catalytic synthesis of 3-alkenyl-oxindoles from oxindole and various aliphatic aldehydes. The Lewis acid-base interaction between Lewis acid sites on CeO2 and benzaldehyde was studied by in situ IR. The structure-activity relationship study using CeO2 catalysts with different sizes suggests that defect-free CeO2 surface is the active site for this reaction.
基金supports by the National Natural Science Foundation of China(No.21978126).
文摘An effective strategy was proposed to control the formation of the interfacial bonding between Ru and molybdenum oxide support to stabilize the Ru atoms with the aim to enhance the hydrogen evolution reaction(HER)activity of the resultant catalysts in alkaline medium.The different interfacial chemical bonds,including Ru–O,Ru–O–Mo,and mixed Ru–Mo/Ru–O–Mo,were prepared using an induced activation strategy by controlling the composition of reducing agents in the calcination process.And the regulation mechanism of the interfacial chemical bonds in molybdenum oxide supported Ru catalysts for optimizing HER activity was investigated by density functional theory(DFT)and experimental studies.We found that a controlled interfacial chemical Ru–O–Mo bonding in Ru-MoO_(2)/C manifests a 12-fold activity increase in catalyzing the hydrogen evolution reaction relative to the conventional metal/metal oxide catalyst(Ru-O-MoO_(2)/C).In a bifunctional effect,the interfacial chemical Ru-O-Mo sites promoted the dissociation of water and the production of hydrogen intermediates that were then adsorbed on the nearby Ru surfaces and recombined into molecular hydrogen.As compared,the nearby Ru surfaces in Ru–Mo bonding have weak adsorption capacity for the generation of these hydrogen intermediates,resulting in a 5-fold increase HER activity for Ru-Mo-MoO_(2)/C catalyst compared with Ru-O-MoO_(2)/C.
基金the National University of Singapore(NUS)Flagship Green Energy Program(grant nos.R-279-000-553-646 and R-279-000-553-731)and the National Natural Science Foundation of China(grant nos.92061109,22033005,and 22038002)for their financial support.N.Y.and J.L.thank the Asian Universities Alliance(AUA)Scholars Award for the sponsorship.Q.Y.acknowledges the hospitality of NUS and Tsinghua University during her sabbatical visit.This work was partially sponsored by the Guangdong Provincial Key Laboratory of Catalysis(grant no.2020B121201002)and the Natural Science Basic Research Program of Shaanxi(2021JCW-20 and S2020-JC-WT-0001).
文摘Fundamental knowledge of structure-activity correlations for heterogeneous single-atom catalysts(SACs)is essential in guiding catalytic design.While linear scaling relations are powerful for predicting the performance of traditionalmetal catalysts,they appear to fail with the involvement of SACs.Comparing the catalytic CO oxidation activity of different atomically dispersed metals(3d,4d,and 5d)in conjunction with computational modeling enabled us to establish multiple scaling relations between the activity and simply calculated descriptors.
基金funded by an Australian Research Council-Linkage Project (No. LP0991544)a UTSAustralian Postgraduate Award scholarship
文摘Potassium titanate nanostructures were synthesised by hydrothermal treatment of TiO2 （P25） in KOH and H2O2. As-produced powders were characterised by scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy, X-ray diffraction, and nitrogen adsorption-desorption methods. Longitudinally-oriented-wire-like structures with a length up to several micrometres and diameters ranging from 10 to 30 nm were obtained. Larger size fibrous nanowires resulting from the hydrotherrnal treatment showed high affinity in adsorbing crystal violet （CV）, which was mainly due to their high surface area. The photocatalytic bleaching of CV solution revealed that the wires are photoactive under ultraviolet light irradiation. Macroporous nanowires are considered as effective adsorbents of CV, capable of photocatalvtic degradation, and they can be easily separated from the solution by settling.
基金supported by the National Natural Science Foundation of China(22101192,22101191,and 22225106)。
文摘The progress of modern chemistry heavily relies on the profound comprehension and sophisticated manipulation of reactive intermediates,such as carbanions,carbocations,radicals,and carbenes.Each of these species possesses a distinct pattern of reactivity,which contributes significantly to the advancements of modern chemistry.In this context,the exploration and application of the carbon dioxide radical anion(CO_(2)^(·-))in organic synthesis have garnered significant interest from both the academia and industry.
基金This work was supported by the National Natural Science Foundation of China(No.21972010)Beijing Natural Science Foundation(No.2192039)+1 种基金the Foundation of Key Laboratory of Low-Carbon Conversion Science&Engineering,Shanghai Advanced Research Institute,the Chinese Academy of Sciences(No.KLLCCSE-201901,SARI,CAS)Beijing University of Chemical Technology(XK180301,XK1804-2).
文摘Engineering of defects in semiconductors provides an effective protocol for improving photocatalytic N_(2) conversion efficiency.This review focuses on the state-of-the-art progress in defect engineering of photocatalysts for the N_(2) reduction toward ammonia.The basic principles and mechanisms of thermal catalyzed and photon-induced N_(2) reduction are first concisely recapped,including relevant properties of the N_(2) molecule,reaction pathways,and NH3 quantification methods.Subsequently,defect classification,synthesis strategies,and identification techniques are compendiously summarized.Advances of in situ characterization techniques for monitoring defect state during the N_(2) reduction process are also described.Especially,various surface defect strategies and their critical roles in improving the N_(2) photoreduction performance are highlighted,including surface vacancies(i.e.,anionic vacancies and cationic vacancies),heteroatom doping(i.e.,metal element doping and nonmetal element doping),and atomically defined surface sites.Finally,future opportunities and challenges as well as perspectives on further development of defect-engineered photocatalysts for the nitrogen reduction to ammonia are presented.It is expected that this review can provide a profound guidance for more specialized design of defect-engineered catalysts with high activity and stability for nitrogen photochemical fixation.
