The Southern Highland Fold and Thrust Belt(SHFTB),the boundary of the Australian plate and the New Guinea Highland block,significantly contributes to the convergent deformation along the plate bound-ary.However,due to...The Southern Highland Fold and Thrust Belt(SHFTB),the boundary of the Australian plate and the New Guinea Highland block,significantly contributes to the convergent deformation along the plate bound-ary.However,due to the lack of observation data,the detailed slip pattern of the SHFTB and the orogenic mechanism beneath the New Guinea Highlands remains controversial.On 25 February 2018,the M_(w)7.5 Papua New Guinea(PNG)earthquake struck the southeastern segment of the SHFTB.The detailed rupture characteristics of this event is significant for further clarifying the inter-seismic slip pattern along the SHFTB.Here,the coseismic deformation field of this earthquake was obtained using high-resolution ALOS-2 satellite images.We find that the 2018 M_(w)7.5 PNG earthquake ruptured a large-scaled fault(SHFTB)extending to the lower crust(deeper than 20 km)beneath the New Guinea Highlands,with a dip angle of 24°.The slips on the fault plane are equivalent to moment magnitudes of M_(w)7.51.Three major asperities with thrust-dominated slip of up to 3.94 m are detected on the fault plane.This finding implies that the slip pattern on the eastern segment of the SHFTB is dominated by thrust,rather than with significant sinistral movement,as previously reported.The tectonic deformation across the New Guinea Highlands is possibly concentrated on the large-scale fault SHFTB and primarily controls the intra-continental orogeny in the central Papua New Guinea.展开更多
The Debao MS4.8 earthquake occurred in western Guangxi on August 5,2021,near where the Jingxi MS5.2 earthquake occurred in 2019.To study the increasing seismicity in western Guangxi,it is necessary to determine whethe...The Debao MS4.8 earthquake occurred in western Guangxi on August 5,2021,near where the Jingxi MS5.2 earthquake occurred in 2019.To study the increasing seismicity in western Guangxi,it is necessary to determine whether there was an anomaly related to the earthquake source near the Pingxiang gravity station,which is located approximately 100 km from the epicenter of the Debao MS4.8 earthquake.In this study,the R-value scoring method was used to analyze the anomaly and evaluate the prediction efficiency of the double frequency(DF)micro-seismic signal vertical displacement(referred to as vertical displacement,VD)and the absolute value of monthly extreme rate(referred to as the monthly rate).Results show that earthquakes larger than MS4.0 in the 350 km range from the Pingxiang station tend to coincide with yearly typhoons,and the VD of micro-seismic signals correspondingly changes from low to high.The Debao MS4.8 earthquake occurred during a gradual VD increase from 0.05×10^(-6)to 0.10×10^(-6)m.When discussing the relationships among R,the rate threshold,and the effective duration of prediction,the rate threshold of the micro-seismic signal converges from 0.00039×10^(-6)to 0.00031×10^(-6)m/month,the effective duration of prediction is approximately 6-10 months,and R also converges from 0.29 to 0.31.By comparing the results of three gPhone gravity stations in Guangxi,we found that the increase of short-term VD before the Debao earthquake was related to the enhancement of the DF micro-seismic signal excited by the typhoon.When the typhoon track was perpendicular to the coastline of China,the possibility of an earthquake occurring was increased.This study provides evidence and reference for the future occurrence period of earthquakes above MS4.0 in western Guangxi.展开更多
On September 5,2022,the Luding M6.8 earthquake occurred in the Moxi-Shimian segment of the Xianshuihe fault,coinciding with the historical ruptured zone of the 1786 Moxi earthquake.Its seis-mogenic environment provide...On September 5,2022,the Luding M6.8 earthquake occurred in the Moxi-Shimian segment of the Xianshuihe fault,coinciding with the historical ruptured zone of the 1786 Moxi earthquake.Its seis-mogenic environment provides a foundation for comprehending the mechanism of the earthquake and its future hazard.In the Moxi-Shimian segment,we establish a series of near-field Global Navigation Satellite Systems(GNsS)stations to enhance the spatial resolution of observational data for the inversion of the interseismic kinematic parameters.In this study,with an elastic screw dislocation model con-strained by GNsS observations,the slip rate of the Moxi-Shimian segment is estimated to be 10.9±1.0 mm/yr,while the locking depth is 15.7±6.2 km.Additionally,we utilize a block-dislocation model to invert the interseismic fault coupling along the Kangding-Moxi-Shimian segment.The result indicates a gradual deepening of the locking depth along the section from Kangding to Shimian.The coseismic rupture of the 2022 event occurred within the high coupling regions in the Kangding-Moxi-Shimian segment,which indicates that the rupture kinematics in this event might be controlled by the interseismic deformation.The seismic moment accumulated within the ruptured zone of the Luding earthquake since 1786 ranges in[1.42-3.40]×10^(19) N-m,which is significantly greater than the seismic moment released during the 2022 event.As a result,we infer that the Luding earthquake released only a portion of the accumulated energy within the original rupture zone since 1786,indicating that the 2022 event has not caused a complete rupture in the Moxi-Shimian segment.Consequently,there remains a substantial seismic hazard in this area.展开更多
The focal mechanism solutions of the MS. 1 Badong earthquake and subsequent 34 aftershocks at ML 2.0 or more were calculated using the P-wave first motion method; the main earthquake was normal fault dip slip type, an...The focal mechanism solutions of the MS. 1 Badong earthquake and subsequent 34 aftershocks at ML 2.0 or more were calculated using the P-wave first motion method; the main earthquake was normal fault dip slip type, and the slip types of the seismogenic rupture surfaces of the subsequent aftershocks primarily include normal dip slip （14 times）, reverse dip slip （9 times）, normal strike slip （9 times） and reverse strike slip （2 times）. The MS. 1 Badong earthquake activities may be related to the stress adjustment caused by the rise of the groundwater level and the decrease of the frictional resistance between structural planes of rock forma- tions due to the effect of reservoir water penetration, and related to the joint activities of the NE-strike Gaoqiao fault and the near EW-strike Daping fault.展开更多
Because only a small near-field coseismie gravity change signal remains after removal of noise from the accuracy of observations and the time and spatial resolution of the earth＇s surface gravity observation system, ...Because only a small near-field coseismie gravity change signal remains after removal of noise from the accuracy of observations and the time and spatial resolution of the earth＇s surface gravity observation system, it is difficult to verify simulations of dislocation theory. In this study, it is shown that the GS15 gravimeter, located 99.5 km from the epicenter of the Ms7.0 Lushan earthquake on April 20, 2013 at 08 ： 04 UTC ＋ 8, showed the influence of the earthquake from 2013-04-16 to 2013-04-26 after a time calibration, tide correc- tions, drift correction, period correction and relaxation correction were applied to its data. The post-seismic relaxation process of the spring in the gravimeter took approximately 430 minutes and showed a 2. 5 ×10^-8 ms^-2 gravity change. After correcting for the relaxation process, it is shown that a coseismic gravity change of approximately ＋0.59 ＋-0. 4 ~ 10-Sms-2 was observed by the GS15 gravimeter; this agrees with the simulated gravity change of approximately 0.31 ~ 10 -8 ms-2. The rate of the coseismie gravity change and the coseismic vertical displacement, as measured by one-second and one-day sampling interval GPS units, is also consistent with the theoretical rate of change. Therefore, the GS15 gravimeter at the Pixian Station observed a coseismic gravity change after the Ms7.0 Lushan earthquake. This and similar measurements could be applied to test and confirm the theory used for these simulations.展开更多
Satellite laser ranging （SLR） is one of the major space geodetic instruments, which has various applications in earth science. In this paper, we introduce several issues regarding the key technology implementation o...Satellite laser ranging （SLR） is one of the major space geodetic instruments, which has various applications in earth science. In this paper, we introduce several issues regarding the key technology implementation of high-repetition-rate SLR system. Compared with traditional technology, using kHz and 8ps pulse width laser component, the data quantity and quality of high-repetition-rate satellite laser ranging （SLR） can be significantly improved. The characteristics of high-repetition-rate laser ranging and the key technologies are presented, including the event timer with the precision of picosecond, the generation of range gate signal, and so on. All of them are based on the Field Programmable Gate Arrays （FPGA） and tested on China mobile SLR system-TROS1000. Finally, the observations of satellite Beacon-C are given.展开更多
The spatial and temporal slip distribution of the Lushan earthquake was estimated using teleseismic body wave data. To perform a stable inversion, we applied smoothing constraints and determined their optimal relative...The spatial and temporal slip distribution of the Lushan earthquake was estimated using teleseismic body wave data. To perform a stable inversion, we applied smoothing constraints and determined their optimal relative weights on the observed data using an optimized Akaike＇ s Bayesian Information Criterion （ABIC）. The inversion generated the source parameters. Strike, dip and slip were 218°, 39° and 100. 8° ,respectively. A seismic moment （M0） was 2. 1 × 10^20 Nm with a moment magnitude （Mw） of 6. 8, and a source duration was approximately 30 second. The rupture propagated along the dip direction, and the maximum slip occurred at the hypocenter. The maximum slip was approximately 2. 1 m, although this earthquake did not cause an apparent surface rupture. The energy was mainly released within 10 second. In addition, the Lushan earthquake was apparently related to the 2008 Wenchuan earthquake. However, the question of whether it was an aftershock of the Wenchuan earthquake requires further study.展开更多
The seismic intensities, lithologic characteristics and terrain features from a 3000 km2-region near the epicenter of the Lushan earthquake are used to analyze earthquake-induced geological disaster. The preliminary r...The seismic intensities, lithologic characteristics and terrain features from a 3000 km2-region near the epicenter of the Lushan earthquake are used to analyze earthquake-induced geological disaster. The preliminary results indicate that secondary effects of the earthquake will affect specific areas, including those with glutenite and carbonate bedrock, a seismic intensity of IX, slopes between 40° and 50°, elevations of less than 2500 m, slope change rates between 20° and 30°, slope curvatures from - 1 to -0.5 and 0. 5 to 1, and relief between 50 and 100 m. Regions with susceptibility indices greater than 0.71 are prone to landslides and collapses. The secondary features are mainly distributed on both sides of the ridges that extend from Baosheng to Shuangshi and from Baosheng to Longxing. Other features are scattered on both sides of the ridges that extend from Qishuping to Baosheng and from Masangping to Lingguan. The distribution of the earthquake-related features trends in the NE direction, and the area that was most affected by the Lushan earthquake covers approximately 52.4 km^2.展开更多
The Wenchuan Ms8.0 earthquake and the Lushan M7.0 earthquake occurred in the north and south segments of the Longmenshan nappe tectonic belt, respectively. Based on the focal mechanism and finite fault model of the We...The Wenchuan Ms8.0 earthquake and the Lushan M7.0 earthquake occurred in the north and south segments of the Longmenshan nappe tectonic belt, respectively. Based on the focal mechanism and finite fault model of the Wenchuan Ms8.0 earthquake, we calculated the coulomb failure stress change. The inverted coulomb stress changes based on the Nishimura and Chenji models both show that the Lushan MT. 0 earth- quake occurred in the increased area of coulomb failure stress induced by the Wenchuan Ms8. 0 earthquake. The coulomb failure stress increased by approximately 0. 135 - 0. 152 bar in the source of the Lushan M7.0 earthquake, which is far more than the stress triggering threshold. Therefore, the Lushan M7.0 earthquake was most likely triggered by the coulomb failure stress change.展开更多
Using plane dislocation theory and the seismic-wave inversion results from the Institute of Geophysics, China Earthquake Administration and the Institute of Geodesy and Geophysics, Chinese Academy of Sciences models, ...Using plane dislocation theory and the seismic-wave inversion results from the Institute of Geophysics, China Earthquake Administration and the Institute of Geodesy and Geophysics, Chinese Academy of Sciences models, the surface coseismic deformation and gravity changes caused by the 2013 Ms7.0 Lushan earthquake are simulated. The simulations of coseismic gravity change and deformation indicate that the dislocation has dip-slip characteristics. The results also show that the coseismic deformation exhibits a symmetrical, positive-and-negative distribution, with the deformation usually being less than 10 mm in the far- field but up to 140 mm in the near-field. The gravity changes are concentrated on the fault-projection area, which is greatly affected by the vertical surface deformation. The gravity change and vertical deformation in the far field are usually less than and 5 mm, respectively, but reach and 330 mm, respectively, in the near field. The simulated results agree well with the measured resuhs, which suggests a theoretical basis for the observed change in gravity before and after this earthquake.展开更多
The May 222021 M_(W)7.4 Madoi,Qinghai,China earthquake presented a rare opportunity to apply the modern unmanned aerial vehicle(UAV)photography method in extreme altitude and weather conditions to image surface ruptur...The May 222021 M_(W)7.4 Madoi,Qinghai,China earthquake presented a rare opportunity to apply the modern unmanned aerial vehicle(UAV)photography method in extreme altitude and weather conditions to image surface ruptures and near-field effects of earthquake-related surface deformations in the remote Tibet.High-resolution aerial photographs were acquired in the days immediately following the mainshock.The complex surface rupture patterns associated with this event were covered comprehensively at 3-6 cm resolution.This effort represents the first time that an earthquake rupture in the interior of the Qinghai-Tibetan Plateau has been fully and systematically captured by such high-resolution imagery,with an unprecedented level of detail,over its entire length.The dataset has proven valuable in documenting subtle and transient rupture features,such as the significant mole-tracks and opening fissures,which were ubiquitous coseismically but degraded during the subsequent summer storm season.Such high-quality imagery also helps to document with high fidelity the fractures of the surface rupture zone(supplements of this paper),the pattern related to how the faults ruptured to the ground surface,and the distribution of off-fault damage.In combination with other ground-based mapping efforts,the data will be analyzed in the following months to better understand the mechanics of earthquake rupture related to the fault zone rheology,rupture dynamics,and frictional properties along with the fault interface.展开更多
The temporal distribution characteristics of COSMIC occultation data are analyzed in detail, and the limitations in earthquake-ionosphere anomaly detection caused by the temporal distribution characteristics of COSMIC...The temporal distribution characteristics of COSMIC occultation data are analyzed in detail, and the limitations in earthquake-ionosphere anomaly detection caused by the temporal distribution characteristics of COSMIC occultation data are discussed using the example of the Wenchuan earthquake. The results demonstrate that there is no fixed temporal resolution for COSMIC occultation data when compared with other ionospheric observation techniques. Therefore, occultation data cannot currently be independently utilized in research studies but can only be used as a complement to other ionospheric observation techniques for applications with high temporal resolution demands, such as earthquake-ionosphere anomaly detection.展开更多
The equivalence of geophysical fields, the finiteness of measurements and the measurement errors make the result of geophysical inversion non-unique. For example, the measurements and inversion method used, the priori...The equivalence of geophysical fields, the finiteness of measurements and the measurement errors make the result of geophysical inversion non-unique. For example, the measurements and inversion method used, the priori rupture model determined and the slip distribution smoothing factor selected will have significant influences on the earthquake rupture slip distribution. Using different data and methods, different authors have given different rupture slip distribution models of the 2015 Mw7.9 Nepal earth- quake, with the maximum slip ranging from 3.0 m to 6.8 m. In this paper, geometry parameters of the single rectangular fault model in elastic half-space were inferred constraining with the Global Posi- tioning System （GPS） and Interferometric Synthetic Aperture Radar （InSAR） coseismic deformations and bounding the slip with approximate average value; and then, the single rectangular fault was divided into multiple sub-faults, and the final slip smoothing factor, the final slip distribution and the maximum slip were determined with the misfit-roughness tradeoff curve, the cross-validation sum of squares （CVSS） and the third-party observation data or indexes being comprehensively taken into account. The results show that, the rupture of the Nepal earthquake extended by over 100 km east by south. The maximum slip of the earthquake was about 6.5-6.7 m, and most of the slip is confined at depths of 8 -20 kin, consistent with the depth distribution of aftershocks. The method for reducing the multiplicity of solutions to rupture slip distribution in this paper was ever used in inversion of rupture slip distri- bution for the 2008 Wenchuan and 2013 Lushan earthquakes, and the third-party measurement - surface dislocation has very large effect on reducing the multiplicity of solutions to inversion of the Wenchuan earthquake. Other priori information or indicators, such as fault strike, dip, earthquake magnitude, seismic activity, Coulomb stress, and seismic period, can be used for beneficial validation of and comparison with inversion results.展开更多
Based on the study of high-precision gravity data obtained from recent studies and the regional gravi- ty network for Yunnan province, a variation in the regional gravity field was identified before the occurrence of ...Based on the study of high-precision gravity data obtained from recent studies and the regional gravi- ty network for Yunnan province, a variation in the regional gravity field was identified before the occurrence of the Yunnan Jinggu M6.6 earthquake.展开更多
On 25 April, 2015, an Mw7.9 earthquake occurred in Nepal, which caused great economic loss and casualties. However, almost no surface ruptures were observed. Therefore, in order to interpret the phenomenon, we study t...On 25 April, 2015, an Mw7.9 earthquake occurred in Nepal, which caused great economic loss and casualties. However, almost no surface ruptures were observed. Therefore, in order to interpret the phenomenon, we study the rupture process of the earthquake to seek answers. Inversion of teleseismic body-wave data is applied to estimate the rupture process of the 2015 Nepal earthquake. To obtain stable solutions, smoothing and non-negative constraints are introduced. 48 teleseismic stations with good coverage are chosen. Finite fault model is established with length and width of 195 km and 150 km, and we set the initial seismic source parameters referring to CMT solutions. Inversion results indicate that the focal mechanism of this earthquake is a thrust fault type, and the strike, dip and rake angle are in accordance with CMT results. The seismic moment is 0.9195 ×10^（21）Nm（Mw7.9）, and source duration is about 70s. The rupture nucleated near the hypocenter and then propagated along the dip direction to the southeast, and the maximum slip amounts to 5.2 m. Uncertainties on the amount of slip retrieved by different inversion methods still exist, the overall characteristics are inconsistent. The lack of shallow slip during the 2015 Gorkha earthquake implies future seismic hazard and this region should be paid more attention to.展开更多
Joint inversion of teleseismic body-wave data and strong ground motion waveforms was applied to determine the rupture process of the 2010 Mentawai earthquake. To obtain stable solutions, smoothing and non-negative con...Joint inversion of teleseismic body-wave data and strong ground motion waveforms was applied to determine the rupture process of the 2010 Mentawai earthquake. To obtain stable solutions, smoothing and non-negative constraints were introduced. A total of 33 teleseismic stations and 5 strong ground motion stations supplied data. The teleseismic and strong ground motion data were separately windowed for 150 s and 250 s and bandpass filtered with frequencies of 0.001e1.0 Hz and 0.005e0.5 Hz, respectively. The finitefault model was established with length and width of 190 km and 70 km, and the initial seismic source parameters were set by referring to centroid moment tensor(CMT) solutions. Joint inversion results indicate that the focal mechanism of this earthquake is thrust fault type, and the strike, dip, and rake angles are generally in accordance with CMT results. The seismic moment was determined as 5.814 1020Nm(Mw7.8) and source duration was about 102 s, which is greater than those of other earthquakes of similar magnitude. The rupture nucleated near the hypocenter and then propagated along the strike direction to the northwest, with a maximum slip of 3.9 m. Large uncertainties regarding the amount of slip retrieved using different inversion methods still exist; however, the conclusion that the majority of slip occurred far from the islands at very shallow depths was found to be robust. The 2010 Mentawai earthquake was categorized as a tsunami earthquake because of the long rupture duration and the generation of a tsunami much larger than was expected for an earthquake of its magnitude.展开更多
Based on Continuous GPS （CGPS） observation data of the Crustal Movement Observation Network of China （CMONOC） and the Sichuan Continuous Operational Reference System （ SCCORS）, we calculated the horizontal cosei...Based on Continuous GPS （CGPS） observation data of the Crustal Movement Observation Network of China （CMONOC） and the Sichuan Continuous Operational Reference System （ SCCORS）, we calculated the horizontal coseismic displacements of CGPS sites caused by the 2013 Lushan Mw 6.6 earthquake. The resuits indicate that the horizontal coseismic deformations of CGPS stations are consistent with thrust-compression rupture. Furthermore, the sites closest to the epicenter underwent significant coseismic displacements. Three network stations exhibited displacements greater than 9 mm （ the largest is 20.9 mm at SCTQ） , while the others were displaced approximately 1 -4 mm.展开更多
The observatory network of the Crustal Deformation China Seismological Bureau was equipped with vertical pendulum tiltmeter,borehole tiltmeter,tunnel extension meters,multi-component borehole strainmeter,body strainme...The observatory network of the Crustal Deformation China Seismological Bureau was equipped with vertical pendulum tiltmeter,borehole tiltmeter,tunnel extension meters,multi-component borehole strainmeter,body strainmeter and other tilt and strain observation instruments.All of these instruments have recorded the Earth’s free oscillation excited by the Japan Mw9.0 Earthquake.By analyzing those observations,all of the spheroidal oscillation modes(0S3-0S30)and toroidal oscillation modes(0T3-0T20)excited by the Japan Mw9.0 Earthquake were detected in this paper.In addition,comparing the different observation results which obtained by those instruments,we revealed their capacity to observe different kinds of oscillation and different frequency band modes,and analyzed report the reason.We found that the body strainmeter and the vertical pendulum tiltmeter have better observing results for spheroidal oscillation.Because of high noise in low frequency band,the borehole tiltmeter cannot observe the low-order spheroidal oscillation.In terms of observing the toroidal oscillation,the multi-component borehole strainmeter got a best result.The vertical pendulum tiltmeter observes a few toroidal oscillation modes,and the tunnel extension meters can only observe some low-order modes.展开更多
The Northe South Seismic Belt(NSSB) is a Chinese tectonic boundary with a very complex structure, showing a sharp change in several geophysical field characteristics. To study these characteristics and their relations...The Northe South Seismic Belt(NSSB) is a Chinese tectonic boundary with a very complex structure, showing a sharp change in several geophysical field characteristics. To study these characteristics and their relationship with the distribution of earthquakes and faults in the study area, we first analyze the spatial gravity anomaly to achieve the Bouguer gravity anomaly(EGM2008 BGA) and the regional gravity survey Bouguer gravity anomaly.Next, we ascertain the Moho depth and crustal thickness of the study area using interface inversion with the control points derived from the seismic and magnetotelluric sounding profiles achieved in recent years. In this paper, we summarize the relief, trend, Moho gradient, and crustal nature, in addition to their relationship with the distribution of earthquakes and faults in the study area. The findings show that earthquakes with magnitudes greater than Ms7.0 are mainly distributed in the Moho Bouguer anomaly variation belt and faults. The results of the study are important for future research on tectonic characteristics, geological and geophysical surveys, and seismicity patterns.展开更多
In this study, a classic survey adjustment computation method was used for data obtained in the Inner Mongolia and Ningxia gravimetric networks between September 2013 and April 2015 so as to investigate the variation ...In this study, a classic survey adjustment computation method was used for data obtained in the Inner Mongolia and Ningxia gravimetric networks between September 2013 and April 2015 so as to investigate the variation of gravity before the Alxa Zuoqi M5.8 earthquake. The relationship between gravity variation and the Alxa Zuoqi M5.8 earthquake was analyzed. The results showed that： （1） the severe variation in gravity field at the test sites before the Alxa Zuoqi M5.8 earthquake, as well as the subsequent accelerated rising, might be an earthquake precursor; （2） the Alxa Zuoqi M5.8 earthquake occurred at the turning point where the high-gravity gradient zone changed from the NE direction to NW.展开更多
基金funded by the Natural Science Foundation of Hubei Province(2022CFB260,2021CFB508)the National Natural Science Foundation of China(No.42074007No.42130101).
文摘The Southern Highland Fold and Thrust Belt(SHFTB),the boundary of the Australian plate and the New Guinea Highland block,significantly contributes to the convergent deformation along the plate bound-ary.However,due to the lack of observation data,the detailed slip pattern of the SHFTB and the orogenic mechanism beneath the New Guinea Highlands remains controversial.On 25 February 2018,the M_(w)7.5 Papua New Guinea(PNG)earthquake struck the southeastern segment of the SHFTB.The detailed rupture characteristics of this event is significant for further clarifying the inter-seismic slip pattern along the SHFTB.Here,the coseismic deformation field of this earthquake was obtained using high-resolution ALOS-2 satellite images.We find that the 2018 M_(w)7.5 PNG earthquake ruptured a large-scaled fault(SHFTB)extending to the lower crust(deeper than 20 km)beneath the New Guinea Highlands,with a dip angle of 24°.The slips on the fault plane are equivalent to moment magnitudes of M_(w)7.51.Three major asperities with thrust-dominated slip of up to 3.94 m are detected on the fault plane.This finding implies that the slip pattern on the eastern segment of the SHFTB is dominated by thrust,rather than with significant sinistral movement,as previously reported.The tectonic deformation across the New Guinea Highlands is possibly concentrated on the large-scale fault SHFTB and primarily controls the intra-continental orogeny in the central Papua New Guinea.
基金supported by grants from the Seismological Science and Technology Spark Program of China Seismological Bureau(grant number XH23026C)the National Natural Science Foundation of China(grant number41204058)。
文摘The Debao MS4.8 earthquake occurred in western Guangxi on August 5,2021,near where the Jingxi MS5.2 earthquake occurred in 2019.To study the increasing seismicity in western Guangxi,it is necessary to determine whether there was an anomaly related to the earthquake source near the Pingxiang gravity station,which is located approximately 100 km from the epicenter of the Debao MS4.8 earthquake.In this study,the R-value scoring method was used to analyze the anomaly and evaluate the prediction efficiency of the double frequency(DF)micro-seismic signal vertical displacement(referred to as vertical displacement,VD)and the absolute value of monthly extreme rate(referred to as the monthly rate).Results show that earthquakes larger than MS4.0 in the 350 km range from the Pingxiang station tend to coincide with yearly typhoons,and the VD of micro-seismic signals correspondingly changes from low to high.The Debao MS4.8 earthquake occurred during a gradual VD increase from 0.05×10^(-6)to 0.10×10^(-6)m.When discussing the relationships among R,the rate threshold,and the effective duration of prediction,the rate threshold of the micro-seismic signal converges from 0.00039×10^(-6)to 0.00031×10^(-6)m/month,the effective duration of prediction is approximately 6-10 months,and R also converges from 0.29 to 0.31.By comparing the results of three gPhone gravity stations in Guangxi,we found that the increase of short-term VD before the Debao earthquake was related to the enhancement of the DF micro-seismic signal excited by the typhoon.When the typhoon track was perpendicular to the coastline of China,the possibility of an earthquake occurring was increased.This study provides evidence and reference for the future occurrence period of earthquakes above MS4.0 in western Guangxi.
基金supported by Open Fund of Wuhan,Gravitation and Solid Earth Tides,National Observation and Research Station(WHYWZ202301)Scientific Research Fund from Institute of Seismology,CEA and National Institute of Natural Hazards,Ministry of Emergency Management of China grants IS202216316 and IS202226318+1 种基金State Key Laboratory of Geodesy and Earth's Dynamics,Innovation Academy for Precision Measurement Science and Technology,CAS SKLGED2023-2-5Science for Earthquake Resilience grant XH20038,and NSFC grant 42074015.
文摘On September 5,2022,the Luding M6.8 earthquake occurred in the Moxi-Shimian segment of the Xianshuihe fault,coinciding with the historical ruptured zone of the 1786 Moxi earthquake.Its seis-mogenic environment provides a foundation for comprehending the mechanism of the earthquake and its future hazard.In the Moxi-Shimian segment,we establish a series of near-field Global Navigation Satellite Systems(GNsS)stations to enhance the spatial resolution of observational data for the inversion of the interseismic kinematic parameters.In this study,with an elastic screw dislocation model con-strained by GNsS observations,the slip rate of the Moxi-Shimian segment is estimated to be 10.9±1.0 mm/yr,while the locking depth is 15.7±6.2 km.Additionally,we utilize a block-dislocation model to invert the interseismic fault coupling along the Kangding-Moxi-Shimian segment.The result indicates a gradual deepening of the locking depth along the section from Kangding to Shimian.The coseismic rupture of the 2022 event occurred within the high coupling regions in the Kangding-Moxi-Shimian segment,which indicates that the rupture kinematics in this event might be controlled by the interseismic deformation.The seismic moment accumulated within the ruptured zone of the Luding earthquake since 1786 ranges in[1.42-3.40]×10^(19) N-m,which is significantly greater than the seismic moment released during the 2022 event.As a result,we infer that the Luding earthquake released only a portion of the accumulated energy within the original rupture zone since 1786,indicating that the 2022 event has not caused a complete rupture in the Moxi-Shimian segment.Consequently,there remains a substantial seismic hazard in this area.
基金supported by the Director Foundation of the Institute of Seismology,China Earthquake Adminstration(IS201246114)the Special Fund of China Three Gorges Corporation(SXSN/3354)
文摘The focal mechanism solutions of the MS. 1 Badong earthquake and subsequent 34 aftershocks at ML 2.0 or more were calculated using the P-wave first motion method; the main earthquake was normal fault dip slip type, and the slip types of the seismogenic rupture surfaces of the subsequent aftershocks primarily include normal dip slip （14 times）, reverse dip slip （9 times）, normal strike slip （9 times） and reverse strike slip （2 times）. The MS. 1 Badong earthquake activities may be related to the stress adjustment caused by the rise of the groundwater level and the decrease of the frictional resistance between structural planes of rock forma- tions due to the effect of reservoir water penetration, and related to the joint activities of the NE-strike Gaoqiao fault and the near EW-strike Daping fault.
基金supported by the National Natural Science Foundation of China(41204058)the Running Foundation of the Gravity Network Center of China(201301008)
文摘Because only a small near-field coseismie gravity change signal remains after removal of noise from the accuracy of observations and the time and spatial resolution of the earth＇s surface gravity observation system, it is difficult to verify simulations of dislocation theory. In this study, it is shown that the GS15 gravimeter, located 99.5 km from the epicenter of the Ms7.0 Lushan earthquake on April 20, 2013 at 08 ： 04 UTC ＋ 8, showed the influence of the earthquake from 2013-04-16 to 2013-04-26 after a time calibration, tide correc- tions, drift correction, period correction and relaxation correction were applied to its data. The post-seismic relaxation process of the spring in the gravimeter took approximately 430 minutes and showed a 2. 5 ×10^-8 ms^-2 gravity change. After correcting for the relaxation process, it is shown that a coseismic gravity change of approximately ＋0.59 ＋-0. 4 ~ 10-Sms-2 was observed by the GS15 gravimeter; this agrees with the simulated gravity change of approximately 0.31 ~ 10 -8 ms-2. The rate of the coseismie gravity change and the coseismic vertical displacement, as measured by one-second and one-day sampling interval GPS units, is also consistent with the theoretical rate of change. Therefore, the GS15 gravimeter at the Pixian Station observed a coseismic gravity change after the Ms7.0 Lushan earthquake. This and similar measurements could be applied to test and confirm the theory used for these simulations.
基金supported by the National Natural Science Foundation of China(40774013)
文摘Satellite laser ranging （SLR） is one of the major space geodetic instruments, which has various applications in earth science. In this paper, we introduce several issues regarding the key technology implementation of high-repetition-rate SLR system. Compared with traditional technology, using kHz and 8ps pulse width laser component, the data quantity and quality of high-repetition-rate satellite laser ranging （SLR） can be significantly improved. The characteristics of high-repetition-rate laser ranging and the key technologies are presented, including the event timer with the precision of picosecond, the generation of range gate signal, and so on. All of them are based on the Field Programmable Gate Arrays （FPGA） and tested on China mobile SLR system-TROS1000. Finally, the observations of satellite Beacon-C are given.
基金jointly supported by the Director of the Foundation of the Institute of Seismology,China Earthquake Administration(IS201102643)the National Natural Science Foundation of China(41004020)
文摘The spatial and temporal slip distribution of the Lushan earthquake was estimated using teleseismic body wave data. To perform a stable inversion, we applied smoothing constraints and determined their optimal relative weights on the observed data using an optimized Akaike＇ s Bayesian Information Criterion （ABIC）. The inversion generated the source parameters. Strike, dip and slip were 218°, 39° and 100. 8° ,respectively. A seismic moment （M0） was 2. 1 × 10^20 Nm with a moment magnitude （Mw） of 6. 8, and a source duration was approximately 30 second. The rupture propagated along the dip direction, and the maximum slip occurred at the hypocenter. The maximum slip was approximately 2. 1 m, although this earthquake did not cause an apparent surface rupture. The energy was mainly released within 10 second. In addition, the Lushan earthquake was apparently related to the 2008 Wenchuan earthquake. However, the question of whether it was an aftershock of the Wenchuan earthquake requires further study.
基金supported by the Director Foundation of the Institute of Seismology,China Earthquake Administration(201056076,201116002)
文摘The seismic intensities, lithologic characteristics and terrain features from a 3000 km2-region near the epicenter of the Lushan earthquake are used to analyze earthquake-induced geological disaster. The preliminary results indicate that secondary effects of the earthquake will affect specific areas, including those with glutenite and carbonate bedrock, a seismic intensity of IX, slopes between 40° and 50°, elevations of less than 2500 m, slope change rates between 20° and 30°, slope curvatures from - 1 to -0.5 and 0. 5 to 1, and relief between 50 and 100 m. Regions with susceptibility indices greater than 0.71 are prone to landslides and collapses. The secondary features are mainly distributed on both sides of the ridges that extend from Baosheng to Shuangshi and from Baosheng to Longxing. Other features are scattered on both sides of the ridges that extend from Qishuping to Baosheng and from Masangping to Lingguan. The distribution of the earthquake-related features trends in the NE direction, and the area that was most affected by the Lushan earthquake covers approximately 52.4 km^2.
基金supported by the Director Foundation of Institute of SeismologyChina Earthquake Administration(201056088)
文摘The Wenchuan Ms8.0 earthquake and the Lushan M7.0 earthquake occurred in the north and south segments of the Longmenshan nappe tectonic belt, respectively. Based on the focal mechanism and finite fault model of the Wenchuan Ms8.0 earthquake, we calculated the coulomb failure stress change. The inverted coulomb stress changes based on the Nishimura and Chenji models both show that the Lushan MT. 0 earth- quake occurred in the increased area of coulomb failure stress induced by the Wenchuan Ms8. 0 earthquake. The coulomb failure stress increased by approximately 0. 135 - 0. 152 bar in the source of the Lushan M7.0 earthquake, which is far more than the stress triggering threshold. Therefore, the Lushan M7.0 earthquake was most likely triggered by the coulomb failure stress change.
基金supported by the National Natural Science Foundation of China(41104049)the Seismic Industry Research Project(201008001)the Earthquake Tracking Task of China Earthquake Administration(2013020211)
文摘Using plane dislocation theory and the seismic-wave inversion results from the Institute of Geophysics, China Earthquake Administration and the Institute of Geodesy and Geophysics, Chinese Academy of Sciences models, the surface coseismic deformation and gravity changes caused by the 2013 Ms7.0 Lushan earthquake are simulated. The simulations of coseismic gravity change and deformation indicate that the dislocation has dip-slip characteristics. The results also show that the coseismic deformation exhibits a symmetrical, positive-and-negative distribution, with the deformation usually being less than 10 mm in the far- field but up to 140 mm in the near-field. The gravity changes are concentrated on the fault-projection area, which is greatly affected by the vertical surface deformation. The gravity change and vertical deformation in the far field are usually less than and 5 mm, respectively, but reach and 330 mm, respectively, in the near field. The simulated results agree well with the measured resuhs, which suggests a theoretical basis for the observed change in gravity before and after this earthquake.
基金This work was supported by the National Natural Science Foundation of China(U1839203,42011540385)the National Key Laboratory of Earthquake Dynamics(LED2020B03,IGCEA1812)the Science and Technology Projects of Qinghai Province(2020-ZJ-752).
文摘The May 222021 M_(W)7.4 Madoi,Qinghai,China earthquake presented a rare opportunity to apply the modern unmanned aerial vehicle(UAV)photography method in extreme altitude and weather conditions to image surface ruptures and near-field effects of earthquake-related surface deformations in the remote Tibet.High-resolution aerial photographs were acquired in the days immediately following the mainshock.The complex surface rupture patterns associated with this event were covered comprehensively at 3-6 cm resolution.This effort represents the first time that an earthquake rupture in the interior of the Qinghai-Tibetan Plateau has been fully and systematically captured by such high-resolution imagery,with an unprecedented level of detail,over its entire length.The dataset has proven valuable in documenting subtle and transient rupture features,such as the significant mole-tracks and opening fissures,which were ubiquitous coseismically but degraded during the subsequent summer storm season.Such high-quality imagery also helps to document with high fidelity the fractures of the surface rupture zone(supplements of this paper),the pattern related to how the faults ruptured to the ground surface,and the distribution of off-fault damage.In combination with other ground-based mapping efforts,the data will be analyzed in the following months to better understand the mechanics of earthquake rupture related to the fault zone rheology,rupture dynamics,and frictional properties along with the fault interface.
基金supported by the National Science Foundation of China(41174029,41204028)Chinese Arctic and Antarctic Administration(20110205)the Fundamental Research Funds for the Central Universities(121001)
文摘The temporal distribution characteristics of COSMIC occultation data are analyzed in detail, and the limitations in earthquake-ionosphere anomaly detection caused by the temporal distribution characteristics of COSMIC occultation data are discussed using the example of the Wenchuan earthquake. The results demonstrate that there is no fixed temporal resolution for COSMIC occultation data when compared with other ionospheric observation techniques. Therefore, occultation data cannot currently be independently utilized in research studies but can only be used as a complement to other ionospheric observation techniques for applications with high temporal resolution demands, such as earthquake-ionosphere anomaly detection.
基金supported by the Director Foundation of Institute of Seismology,China Earthquake Adminstration(IS201506220)the National Natural Science Foundation of China(40974012,41304019)the Special Foundation for Seismic Research(201208006)
文摘The equivalence of geophysical fields, the finiteness of measurements and the measurement errors make the result of geophysical inversion non-unique. For example, the measurements and inversion method used, the priori rupture model determined and the slip distribution smoothing factor selected will have significant influences on the earthquake rupture slip distribution. Using different data and methods, different authors have given different rupture slip distribution models of the 2015 Mw7.9 Nepal earth- quake, with the maximum slip ranging from 3.0 m to 6.8 m. In this paper, geometry parameters of the single rectangular fault model in elastic half-space were inferred constraining with the Global Posi- tioning System （GPS） and Interferometric Synthetic Aperture Radar （InSAR） coseismic deformations and bounding the slip with approximate average value; and then, the single rectangular fault was divided into multiple sub-faults, and the final slip smoothing factor, the final slip distribution and the maximum slip were determined with the misfit-roughness tradeoff curve, the cross-validation sum of squares （CVSS） and the third-party observation data or indexes being comprehensively taken into account. The results show that, the rupture of the Nepal earthquake extended by over 100 km east by south. The maximum slip of the earthquake was about 6.5-6.7 m, and most of the slip is confined at depths of 8 -20 kin, consistent with the depth distribution of aftershocks. The method for reducing the multiplicity of solutions to rupture slip distribution in this paper was ever used in inversion of rupture slip distri- bution for the 2008 Wenchuan and 2013 Lushan earthquakes, and the third-party measurement - surface dislocation has very large effect on reducing the multiplicity of solutions to inversion of the Wenchuan earthquake. Other priori information or indicators, such as fault strike, dip, earthquake magnitude, seismic activity, Coulomb stress, and seismic period, can be used for beneficial validation of and comparison with inversion results.
基金supported by the National Natural Science Foundation of China(41304059,41304059)the Seismic Industry Research Project(201308004)
文摘Based on the study of high-precision gravity data obtained from recent studies and the regional gravi- ty network for Yunnan province, a variation in the regional gravity field was identified before the occurrence of the Yunnan Jinggu M6.6 earthquake.
基金supported by National Natural Science Foundation of China (41304046)
文摘On 25 April, 2015, an Mw7.9 earthquake occurred in Nepal, which caused great economic loss and casualties. However, almost no surface ruptures were observed. Therefore, in order to interpret the phenomenon, we study the rupture process of the earthquake to seek answers. Inversion of teleseismic body-wave data is applied to estimate the rupture process of the 2015 Nepal earthquake. To obtain stable solutions, smoothing and non-negative constraints are introduced. 48 teleseismic stations with good coverage are chosen. Finite fault model is established with length and width of 195 km and 150 km, and we set the initial seismic source parameters referring to CMT solutions. Inversion results indicate that the focal mechanism of this earthquake is a thrust fault type, and the strike, dip and rake angle are in accordance with CMT results. The seismic moment is 0.9195 ×10^（21）Nm（Mw7.9）, and source duration is about 70s. The rupture nucleated near the hypocenter and then propagated along the dip direction to the southeast, and the maximum slip amounts to 5.2 m. Uncertainties on the amount of slip retrieved by different inversion methods still exist, the overall characteristics are inconsistent. The lack of shallow slip during the 2015 Gorkha earthquake implies future seismic hazard and this region should be paid more attention to.
基金supported by National Natural Science Foundation of China (41304046)
文摘Joint inversion of teleseismic body-wave data and strong ground motion waveforms was applied to determine the rupture process of the 2010 Mentawai earthquake. To obtain stable solutions, smoothing and non-negative constraints were introduced. A total of 33 teleseismic stations and 5 strong ground motion stations supplied data. The teleseismic and strong ground motion data were separately windowed for 150 s and 250 s and bandpass filtered with frequencies of 0.001e1.0 Hz and 0.005e0.5 Hz, respectively. The finitefault model was established with length and width of 190 km and 70 km, and the initial seismic source parameters were set by referring to centroid moment tensor(CMT) solutions. Joint inversion results indicate that the focal mechanism of this earthquake is thrust fault type, and the strike, dip, and rake angles are generally in accordance with CMT results. The seismic moment was determined as 5.814 1020Nm(Mw7.8) and source duration was about 102 s, which is greater than those of other earthquakes of similar magnitude. The rupture nucleated near the hypocenter and then propagated along the strike direction to the northwest, with a maximum slip of 3.9 m. Large uncertainties regarding the amount of slip retrieved using different inversion methods still exist; however, the conclusion that the majority of slip occurred far from the islands at very shallow depths was found to be robust. The 2010 Mentawai earthquake was categorized as a tsunami earthquake because of the long rupture duration and the generation of a tsunami much larger than was expected for an earthquake of its magnitude.
基金supported by National Natural Science Foundation of China(41074016)
文摘Based on Continuous GPS （CGPS） observation data of the Crustal Movement Observation Network of China （CMONOC） and the Sichuan Continuous Operational Reference System （ SCCORS）, we calculated the horizontal coseismic displacements of CGPS sites caused by the 2013 Lushan Mw 6.6 earthquake. The resuits indicate that the horizontal coseismic deformations of CGPS stations are consistent with thrust-compression rupture. Furthermore, the sites closest to the epicenter underwent significant coseismic displacements. Three network stations exhibited displacements greater than 9 mm （ the largest is 20.9 mm at SCTQ） , while the others were displaced approximately 1 -4 mm.
基金supported by China seismological bureau special scientific research(17A18ZX085)
文摘The observatory network of the Crustal Deformation China Seismological Bureau was equipped with vertical pendulum tiltmeter,borehole tiltmeter,tunnel extension meters,multi-component borehole strainmeter,body strainmeter and other tilt and strain observation instruments.All of these instruments have recorded the Earth’s free oscillation excited by the Japan Mw9.0 Earthquake.By analyzing those observations,all of the spheroidal oscillation modes(0S3-0S30)and toroidal oscillation modes(0T3-0T20)excited by the Japan Mw9.0 Earthquake were detected in this paper.In addition,comparing the different observation results which obtained by those instruments,we revealed their capacity to observe different kinds of oscillation and different frequency band modes,and analyzed report the reason.We found that the body strainmeter and the vertical pendulum tiltmeter have better observing results for spheroidal oscillation.Because of high noise in low frequency band,the borehole tiltmeter cannot observe the low-order spheroidal oscillation.In terms of observing the toroidal oscillation,the multi-component borehole strainmeter got a best result.The vertical pendulum tiltmeter observes a few toroidal oscillation modes,and the tunnel extension meters can only observe some low-order modes.
基金supported by the China Earthquake Administration, Institute of Seismology Foundation (201326126)Institute of Seismology Foundation (201326128)Chinese earthquake scientific array exploration e northern section of North South seismic belt gravity profile Foundation (201308011)
文摘The Northe South Seismic Belt(NSSB) is a Chinese tectonic boundary with a very complex structure, showing a sharp change in several geophysical field characteristics. To study these characteristics and their relationship with the distribution of earthquakes and faults in the study area, we first analyze the spatial gravity anomaly to achieve the Bouguer gravity anomaly(EGM2008 BGA) and the regional gravity survey Bouguer gravity anomaly.Next, we ascertain the Moho depth and crustal thickness of the study area using interface inversion with the control points derived from the seismic and magnetotelluric sounding profiles achieved in recent years. In this paper, we summarize the relief, trend, Moho gradient, and crustal nature, in addition to their relationship with the distribution of earthquakes and faults in the study area. The findings show that earthquakes with magnitudes greater than Ms7.0 are mainly distributed in the Moho Bouguer anomaly variation belt and faults. The results of the study are important for future research on tectonic characteristics, geological and geophysical surveys, and seismicity patterns.
基金supported by the China Earthquake Administration Earthquake Tracking Task Orientation(2016020202,2016010216,and 2016010220)the“Three Combination”project of the China Earthquake Administration(163201)+2 种基金the National Natural Science Foundation of China(41204058,41474064,and 41374088)the special earthquake research,China Earthquake Administration(201508009-08)the Director,Foundation of Institute of Seismology,China Earthquake Administration(IS201326123)
文摘In this study, a classic survey adjustment computation method was used for data obtained in the Inner Mongolia and Ningxia gravimetric networks between September 2013 and April 2015 so as to investigate the variation of gravity before the Alxa Zuoqi M5.8 earthquake. The relationship between gravity variation and the Alxa Zuoqi M5.8 earthquake was analyzed. The results showed that： （1） the severe variation in gravity field at the test sites before the Alxa Zuoqi M5.8 earthquake, as well as the subsequent accelerated rising, might be an earthquake precursor; （2） the Alxa Zuoqi M5.8 earthquake occurred at the turning point where the high-gravity gradient zone changed from the NE direction to NW.
