This study aims to beneficiate low grade goethitic iron ore fines using a selective flocculation process. Selective flocculation studies were conducted using different polymers such as starch amylopectin(AP), poly acr...This study aims to beneficiate low grade goethitic iron ore fines using a selective flocculation process. Selective flocculation studies were conducted using different polymers such as starch amylopectin(AP), poly acrylic acid(PAA), and a graft copolymer(AP-g-PAA). The obtained results were analyzed; they indicate the enhancement of the iron ore grade from 58.49% to 67.52% using AP-g-PAA with a recovery of 95.08%. In addition, 64.45% Fe with a recovery of 88.79% was obtained using AP. Similarly, using PAA, the grade increased to 63.46% Fe with a recovery of 82.10%. The findings are also supported by characterizing concentrates using X-ray diffraction(XRD) and electron probe microanalysis(EPMA) techniques.展开更多
A new polymer-supported metallocene catalyst has been prepared, The polymer-supported metallocene displayed considerably high activity in ethylene polymerization, the highest being 3.62x10(7) gPE/molZr.h, the molecula...A new polymer-supported metallocene catalyst has been prepared, The polymer-supported metallocene displayed considerably high activity in ethylene polymerization, the highest being 3.62x10(7) gPE/molZr.h, the molecular weight of the polyethylene produced was Mn = 1.29x10(5). about 3-4 times those of corresponding homogeneous zirconocenes. The polymer-supported metallocene keeps the characteristics of homogeneous metallocene catalysts, and offers some features, such as adaptable to gas phase and slurry processes: easy to prepare in low cost: relatively high activity and lower MAO/Zr ratio; lower inorganic residues in the polyolefins as compared to cases of SiO2, Al2O3 or MgCl2; unitary active structure, no complex surface as with SiO2; good control of morphology of the resulting polymer.展开更多
The polymerization mechanism is described by the conductance change with the time during the polymerization. The mechanism can be explained by the equilibrium feature (i.e. main ion-pairs) between the free ions and th...The polymerization mechanism is described by the conductance change with the time during the polymerization. The mechanism can be explained by the equilibrium feature (i.e. main ion-pairs) between the free ions and the ion-pairs dissociated by the organic salt (-) Sp*(+)(+) CSA*(-) (An asterisk represents the chirality) and the scheme of the polymerization process is described mainly by the charge transfer complexes having chiral induction power.展开更多
By covalently binding chromophore NPP, N-(4-nitrophenyl)-(L)-prolinol, to a structurally controlled cage-like cross-linking polymer (SCCP), a modified nonlinear optical (NLO) polymeric film prepared by 'in situ po...By covalently binding chromophore NPP, N-(4-nitrophenyl)-(L)-prolinol, to a structurally controlled cage-like cross-linking polymer (SCCP), a modified nonlinear optical (NLO) polymeric film prepared by 'in situ poling and sol-gel' process successfully overcame the fundamental problem of NPP chromophores subliming out from the cages of the 'doped'' NLO polymeric film when heated or placed under UV light. Its d(33) (coefficient of second harmonic generation) is 2.0 X 10(-8) esu. measured by IR dichroism. The modified film has a low decay of the SHG signal and preserves 94% of the initial value after 50 days at room temperature These properties match that of the 'doped' film, indicating that the modified film also retains the main advantages of the 'doped' film.展开更多
Facile and rapid polycondensation reactions of N,N'-(pyromellitoyl)-bis-L-leucine diacid chloride 1 with eight different derivatives of hydantoin compounds 2a-h were developed by using a domestic microwave oven in...Facile and rapid polycondensation reactions of N,N'-(pyromellitoyl)-bis-L-leucine diacid chloride 1 with eight different derivatives of hydantoin compounds 2a-h were developed by using a domestic microwave oven in the presence of a small amount of polar organic medium such as o-cresol. The polycondensation reactions proceeded rapidly, compared with the conventional solution polycondensation, and was completed within 7-10 min, producing a series of novel optically active poly(amide-imide)s 3a-h with high yield and inherent viscosity of 0.35-0.65 dL/g. All of the above polymers were fully characterized by FT-IR, elemental analyses, inherent viscosity (η inh ), solubility test and specific rotation. Some structural characterization and physical properties of these optically active poly(amide-imide)s are reported.展开更多
The structure and properties of poly(N-vinylcarbazole) (PVCZ) obtained via asymmetrically stereoselective polymerization have been studied by using **1H NMR spectra, UV spectra, DSC analysis and GPC. The steric micro...The structure and properties of poly(N-vinylcarbazole) (PVCZ) obtained via asymmetrically stereoselective polymerization have been studied by using **1H NMR spectra, UV spectra, DSC analysis and GPC. The steric microstructure i.e. the content of isotactic sequences was found to be increased by using AIBN to ( minus )Sp***** plus ( plus )CSA***** minus as the initiators or catalysts and the mole extinction coefficient to be decreased. Bimodal molecular weight distribution (MWD)s of the obtained PVCZs were caused by two propagating species of the free ions and the ion-pairs associated with the organic salts during polymerization. (Author abstract) 19 Refs.展开更多
Six new thermally stable polyesters (4a-f) were synthesized through the solution polycondensation reaction of 2,5-pyridine dicarbonyldichloride (2) with six aromatic diols in N,N'-dimethyl acetamide (DMAc) solu...Six new thermally stable polyesters (4a-f) were synthesized through the solution polycondensation reaction of 2,5-pyridine dicarbonyldichloride (2) with six aromatic diols in N,N'-dimethyl acetamide (DMAc) solution and in the presence of pyridine as a base. The polycondensation reactions produce a series of new polyesters (4a-f) in high yields, and inherent viscosity between 0.30 and 0.55 dL/g. The resulting polyesters were characterized by elemental analysis, viscosity measurements, thermal gravimetric analysis (TGA and DTG), solubility test, Fourier transform infrared (FT-IR) spectroscopy and gel permeation chromatography (GPC). C 2009 Khalil Faghihi. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.展开更多
A novel supramolecular polysiloxane clathrate, POS/C, has been preparedby in-situ encapsulating rodlike p-butoxybenzylidene-p ' - dodecoxyaniline (BBDA ) , one kindof Schiff base liquid crystal molecule, within th...A novel supramolecular polysiloxane clathrate, POS/C, has been preparedby in-situ encapsulating rodlike p-butoxybenzylidene-p ' - dodecoxyaniline (BBDA ) , one kindof Schiff base liquid crystal molecule, within the pore of polyorganosiloxane (POS) whichis prepared by hydrosilylation coupling reaction of polyvinylsilsesquioxane (Vi- T ) withtetramethyldisiloxane (H-MM). Investigation by polarized light microscopy (PLM), differ-ential scanning calorimetry (DSC), infrared spectroscopy (IR), atomic force microscopy(AFM) and molecular simulation gives a preliminary support to the existence of the titlesupramolecular clathrate.展开更多
It is necessary to synthesize new material for the advancements of the technology. In this study, new and novel poly(2-anisidine)@zirconium tungstate(P2A/ZrW_2O_8) was synthesized by simple so-gel method. Physicochemi...It is necessary to synthesize new material for the advancements of the technology. In this study, new and novel poly(2-anisidine)@zirconium tungstate(P2A/ZrW_2O_8) was synthesized by simple so-gel method. Physicochemical characterization of P2A/ZrW_2O_8 was done by thermogravimetric analysis(TGA), scanning electron microscopy(SEM), X-ray powder diffraction(XRD), Fourier transform infrared spectroscopy(FTIR), ion exchange and simultaneous four probe dc conductivity studies. The conductivity study revealed its highly semiconducting nature, in the range of 10^(-1)–10^(-2) S·cm^(-1). Ion-exchange capabilities of the composite make it applicable for cation-exchange studies. The result of distribution studies(Kd) revealed its selectivity towards Cd^(2+) compared to other metal ions. This property of the composite was utilized for designing Cd^(2+) selective membrane electrode. Several important physical parameters of the ion-selective electrode were determined, such as Nernstian slope(32.32 mV·decade^(-1)), working pH range was 2.0–4.0 and response time was found ~ 17 s.The analytical utility of this wave like composite membrane electrode was as, indicator electrode in various potentiometric titrations.展开更多
Fluorescence spectra of ladderlike polyphenylsilsesquioxane (LPPS) and ladderlike 1,4-phenylene-bridged polyvinylsiloxane (LPPVS) have been measured as a function of temperature (4-55 degreesC), in dilute tetrahydrofu...Fluorescence spectra of ladderlike polyphenylsilsesquioxane (LPPS) and ladderlike 1,4-phenylene-bridged polyvinylsiloxane (LPPVS) have been measured as a function of temperature (4-55 degreesC), in dilute tetrahydrofuran solution. The excimer (IF) to monomer (I-M) intensity ratio (I-E/I-M) of LPPS dilute solution shows a double linear Arrhenius plot with a break point ascribable to a transition temperature Tt. This behavior has not been found for single chain polyorganosiloxanes. When In/(E) of LPPS was plotted against 1/T, it also gave a double linear plot with one break point, which was found in single chain polyorganosiloxanes. The different behaviors between LPPS and single chain polyorganosiloxanes may be mainly attributed to the relatively rigid double-chain macromolecular backbone of LPPS. However, the 1n(I-E/I-M) of dilute LPPVS solution versus 1/T shows a simple linear variation with a positive slope which confirms our proposition. The difference between the fluorescence results of LPPS and those of LPPVS may possibly derive from their structure differences and cooperative motion in backbone chain bonds.展开更多
Poly(arylene ether diketone)s were prepared by the aromatic nucleophilic displacement reaction of 4,4'-difluorobenzil with different bisphenols in the presence of anhydrous potassium carbonate in diphenylsulfone a...Poly(arylene ether diketone)s were prepared by the aromatic nucleophilic displacement reaction of 4,4'-difluorobenzil with different bisphenols in the presence of anhydrous potassium carbonate in diphenylsulfone at elevated temperature. The polymers obtained had inherent viscosity of 0.51 similar to 0.63 dL/g, and exhibited glass transition temperature ranging from 136 similar to 217 degrees C mainly depending on the bisphenols used in the polymer synthesis. Thermogravimetry of these polymers showed excellent thermal stability, indicating that 10% weight losses of the polymers were observed in the range above 428 degrees C and 438 degrees C in air and nitrogen, respectively. The mechanical properties of these polymers were also described and the permeability of five polymers for H-2, O-2 and N-2 was determined at 30 degrees C.展开更多
The one plus one (1 + 1) mode of hydrosilation reaction of ladderlike cis-isotatic polyallylsilsesquioxane (Allyl-T) and polyhydrosilsesquioxane (H-T) using dicyclopentadienylplatinumdichloride (Cp2PtCl2) as the catal...The one plus one (1 + 1) mode of hydrosilation reaction of ladderlike cis-isotatic polyallylsilsesquioxane (Allyl-T) and polyhydrosilsesquioxane (H-T) using dicyclopentadienylplatinumdichloride (Cp2PtCl2) as the catalyst leads to the formation of a new polyorganosiloxane (POS). The presence of nanoscale tubular structure in the product POS was preliminarily proved by IR, H-1-NMR, differential scanning calorimetry (DSC), X-ray diffraction (XRD), gel permeation chromatography (GPC), atomic force microscopy (AFM) and molecular simulation.展开更多
The hydrosilylation reaction of ladderlike polyvinylsilsesquioxane (Vi-T) with 1, 1, 3, 3-tetramethyldisiloxane (H-MM) catalyzed by dicyclopentadienyl-dichloroplatinium (Cp2PtCl2) was carried out well in tetrahydrofur...The hydrosilylation reaction of ladderlike polyvinylsilsesquioxane (Vi-T) with 1, 1, 3, 3-tetramethyldisiloxane (H-MM) catalyzed by dicyclopentadienyl-dichloroplatinium (Cp2PtCl2) was carried out well in tetrahydrofuran (THF) to produce a soluble white solid. This product was characterized by IR, H-1-NMR, C-13-NMR, Si-29-NMR, DSC, X-ray diffraction method, gel permeation chromatography (GPC), vapour pressure osmometry (VPO), atomic force microscopy (AFM) and molecular simulation. These results prove that the product contains nanoscale tubular structure.展开更多
A novel soluble ladderlike polysilsesquioxane containing reactive ester groups (Ester-T) was synthesized for the first time by stepwise coupling polymerization including preammonolysis, controlled hydrolysis and polyc...A novel soluble ladderlike polysilsesquioxane containing reactive ester groups (Ester-T) was synthesized for the first time by stepwise coupling polymerization including preammonolysis, controlled hydrolysis and polycondensation. The monomer, 3-trichlorosilylpropoxy 4-acetoxybenzoate (M), was synthesized by hydrosilylation of allyloxy 4-acetoxybenzoate with trichlorosilane in the presence of dicyclopentadienylplatinum (II) chloride (Cp2PtCl2) catalyst. Combination of FTIR, H-1-NMR, C-13-NMR, Si-29-NMR, XRD, DSC, TGA and VPO methods was used to demonstrate that the polymer obtained has an ordered ladderlike structure. The synthesized Ester-T may have promising applications as a precursor of advanced functional polymers.展开更多
Fluorescent molecules - p-dimethylaminobenzonitrile (DMABN) and trans-stilbene (TSB ) - were used as probes to investigate the inner structure of the nanotubular cavities contained in a new polyorganosiloxane (POS) wh...Fluorescent molecules - p-dimethylaminobenzonitrile (DMABN) and trans-stilbene (TSB ) - were used as probes to investigate the inner structure of the nanotubular cavities contained in a new polyorganosiloxane (POS) which was prepared by the hydrosilylation coupling reaction of cis-isotactic ladderlike polyvinylsilsesquioxane (Vi-T) with 1,1,3,3-tetramethyldisiloxane (H-MM) as coupling agent in the presence of catalyst dicyclopentadienyldichloroplatinum (Cp2PtCl2). The results from FTIR spectra and fluorescence spectra in combination with molecular simulation reveal that the cross-section of the nanotubular cavity is nearly rectangular in shape, and is about 0.62 nm in width and about 0.38 nm in height. This work gains in-depth knowledge into the inner structure of the nanotubular cavities of POS and furthermore provides a guide to the selection of proper guest molecules in constructing functional supramolecular clathrate based upon POS.展开更多
The target compound BCH-189 was synthesized with high yield via four steps from benzoyloxy acetylaldehyde and p-dithiane-2,5-diol as starting materials. The synthetic route is preferable to what literature reported.
Six new optically active poly(amide-imide)s (5a-f) were synthesized through the direct polycondensation reaction of N,N′-(4,4′- diphthaloyl)-bis-L-leucine (3) with six hydantoin derivatives (4a-f). Tripben...Six new optically active poly(amide-imide)s (5a-f) were synthesized through the direct polycondensation reaction of N,N′-(4,4′- diphthaloyl)-bis-L-leucine (3) with six hydantoin derivatives (4a-f). Tripbenyl phosphite (TPP)/pyridine in the presence of calcium chloride (CaCl2) and N-methyl-2-pyrrolidone (NMP) were successfully applied for direct polycondensation. The polycondensation reactions produce a series of new poly(amide-imide)s (5a-f) in high yields, and inherent viscosity between 0.42 and 0,55 dL/g. The resulting poly(amide-imide)s (5a-f) were characterized by elemental analysis, viscosity measurements, thermal gravimetric analysis (TGA and DTG), solubility test and FT-IR spectroscopy.展开更多
Electrochemical polymerizations of various ratios of pyrrole and methylpyrrole monomers were performed in aqueous toluene-4-sulfinic acid sodium salt (T4SNa) electrolyte, using galvanostatic method. pH of electrolyte ...Electrochemical polymerizations of various ratios of pyrrole and methylpyrrole monomers were performed in aqueous toluene-4-sulfinic acid sodium salt (T4SNa) electrolyte, using galvanostatic method. pH of electrolyte was adjusted by p-toluene sulfonic acid (PTSA). In order to prevent corrosion of mild steel substrates during coating deposition, specimens were pretreated in 0.5M oxalic acid solution, employing galvanostatic method. This would passivate the steel substrate and facilitate the coating process as well. Corrosion resistance of coated substrates was investigated in 1M NaCl solution using Tafel polarization technique. In addition, using scanning electron microscopy (SEM), morphological characterization of coatings produced, was investigated. Regarding the corrosion characteristics, results obtained revealed that the ratio of 1 to 1 (Pyrrole/Methylpyrrole) could play an important role.展开更多
Eight novel poly(amide-imide)s were synthesized under microwave irradiation by using a domestic microwaveoven from the polycondensation reactions of N.N'-(pyromellitoyl)-bis-L-alanine diacid chloride(1)with eight ...Eight novel poly(amide-imide)s were synthesized under microwave irradiation by using a domestic microwaveoven from the polycondensation reactions of N.N'-(pyromellitoyl)-bis-L-alanine diacid chloride(1)with eight differentderivatives of hydantoin compounds(2a-h)in the presence of a small amount of a polar organic medium such as o-cresol.The polycondensation proceeded rapidly,compared with the conventional solution polycondensation and was completedwithin 8-10 min,producing a series of new poly(amide-imide)s(3a-h)with inherent viscosities about 0.35-0.68 dL/g inhigh yields.The obtained PAIs(3a-h)were fully characterized by means of FT-IR spectroscopy,elemental analyses,inherentviscosity(ηinh),solubility and specific rotation measurements.All of the resulting polymers show optical rotation and areoptically active.Thermal properties of the poly(amide-imide)s were investigated by using thermal gravimetric analysis(TGA).展开更多
基金the National Metallurgical Laboratory,Jamshedpur for their kind support
文摘This study aims to beneficiate low grade goethitic iron ore fines using a selective flocculation process. Selective flocculation studies were conducted using different polymers such as starch amylopectin(AP), poly acrylic acid(PAA), and a graft copolymer(AP-g-PAA). The obtained results were analyzed; they indicate the enhancement of the iron ore grade from 58.49% to 67.52% using AP-g-PAA with a recovery of 95.08%. In addition, 64.45% Fe with a recovery of 88.79% was obtained using AP. Similarly, using PAA, the grade increased to 63.46% Fe with a recovery of 82.10%. The findings are also supported by characterizing concentrates using X-ray diffraction(XRD) and electron probe microanalysis(EPMA) techniques.
文摘A new polymer-supported metallocene catalyst has been prepared, The polymer-supported metallocene displayed considerably high activity in ethylene polymerization, the highest being 3.62x10(7) gPE/molZr.h, the molecular weight of the polyethylene produced was Mn = 1.29x10(5). about 3-4 times those of corresponding homogeneous zirconocenes. The polymer-supported metallocene keeps the characteristics of homogeneous metallocene catalysts, and offers some features, such as adaptable to gas phase and slurry processes: easy to prepare in low cost: relatively high activity and lower MAO/Zr ratio; lower inorganic residues in the polyolefins as compared to cases of SiO2, Al2O3 or MgCl2; unitary active structure, no complex surface as with SiO2; good control of morphology of the resulting polymer.
基金Financial Support by the National Science Foundation of China,Grant No.:29774039
文摘The polymerization mechanism is described by the conductance change with the time during the polymerization. The mechanism can be explained by the equilibrium feature (i.e. main ion-pairs) between the free ions and the ion-pairs dissociated by the organic salt (-) Sp*(+)(+) CSA*(-) (An asterisk represents the chirality) and the scheme of the polymerization process is described mainly by the charge transfer complexes having chiral induction power.
基金The project was supported by the National Natural Science Foundation of China (No. 59483001).
文摘By covalently binding chromophore NPP, N-(4-nitrophenyl)-(L)-prolinol, to a structurally controlled cage-like cross-linking polymer (SCCP), a modified nonlinear optical (NLO) polymeric film prepared by 'in situ poling and sol-gel' process successfully overcame the fundamental problem of NPP chromophores subliming out from the cages of the 'doped'' NLO polymeric film when heated or placed under UV light. Its d(33) (coefficient of second harmonic generation) is 2.0 X 10(-8) esu. measured by IR dichroism. The modified film has a low decay of the SHG signal and preserves 94% of the initial value after 50 days at room temperature These properties match that of the 'doped' film, indicating that the modified film also retains the main advantages of the 'doped' film.
基金This project was supported by the Research Affairs Division of Arak University.
文摘Facile and rapid polycondensation reactions of N,N'-(pyromellitoyl)-bis-L-leucine diacid chloride 1 with eight different derivatives of hydantoin compounds 2a-h were developed by using a domestic microwave oven in the presence of a small amount of polar organic medium such as o-cresol. The polycondensation reactions proceeded rapidly, compared with the conventional solution polycondensation, and was completed within 7-10 min, producing a series of novel optically active poly(amide-imide)s 3a-h with high yield and inherent viscosity of 0.35-0.65 dL/g. All of the above polymers were fully characterized by FT-IR, elemental analyses, inherent viscosity (η inh ), solubility test and specific rotation. Some structural characterization and physical properties of these optically active poly(amide-imide)s are reported.
基金Project 29774039 was supported by the National Natural Science Foundation of China
文摘The structure and properties of poly(N-vinylcarbazole) (PVCZ) obtained via asymmetrically stereoselective polymerization have been studied by using **1H NMR spectra, UV spectra, DSC analysis and GPC. The steric microstructure i.e. the content of isotactic sequences was found to be increased by using AIBN to ( minus )Sp***** plus ( plus )CSA***** minus as the initiators or catalysts and the mole extinction coefficient to be decreased. Bimodal molecular weight distribution (MWD)s of the obtained PVCZs were caused by two propagating species of the free ions and the ion-pairs associated with the organic salts during polymerization. (Author abstract) 19 Refs.
文摘Six new thermally stable polyesters (4a-f) were synthesized through the solution polycondensation reaction of 2,5-pyridine dicarbonyldichloride (2) with six aromatic diols in N,N'-dimethyl acetamide (DMAc) solution and in the presence of pyridine as a base. The polycondensation reactions produce a series of new polyesters (4a-f) in high yields, and inherent viscosity between 0.30 and 0.55 dL/g. The resulting polyesters were characterized by elemental analysis, viscosity measurements, thermal gravimetric analysis (TGA and DTG), solubility test, Fourier transform infrared (FT-IR) spectroscopy and gel permeation chromatography (GPC). C 2009 Khalil Faghihi. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.
基金the Research Affairs Division of Isfahan University of Technology(IUT)National Elite Foundation(NEF)Center of Excellency in Sensors and Green Chemistry Research(IUT)
基金This project is financially supported by NSFC(59483001 & 29574187),Chinese Academy of Sciences(KJ-952-S1-508)and Organic Solids Laboratory,ICCAS.
文摘A novel supramolecular polysiloxane clathrate, POS/C, has been preparedby in-situ encapsulating rodlike p-butoxybenzylidene-p ' - dodecoxyaniline (BBDA ) , one kindof Schiff base liquid crystal molecule, within the pore of polyorganosiloxane (POS) whichis prepared by hydrosilylation coupling reaction of polyvinylsilsesquioxane (Vi- T ) withtetramethyldisiloxane (H-MM). Investigation by polarized light microscopy (PLM), differ-ential scanning calorimetry (DSC), infrared spectroscopy (IR), atomic force microscopy(AFM) and molecular simulation gives a preliminary support to the existence of the titlesupramolecular clathrate.
文摘It is necessary to synthesize new material for the advancements of the technology. In this study, new and novel poly(2-anisidine)@zirconium tungstate(P2A/ZrW_2O_8) was synthesized by simple so-gel method. Physicochemical characterization of P2A/ZrW_2O_8 was done by thermogravimetric analysis(TGA), scanning electron microscopy(SEM), X-ray powder diffraction(XRD), Fourier transform infrared spectroscopy(FTIR), ion exchange and simultaneous four probe dc conductivity studies. The conductivity study revealed its highly semiconducting nature, in the range of 10^(-1)–10^(-2) S·cm^(-1). Ion-exchange capabilities of the composite make it applicable for cation-exchange studies. The result of distribution studies(Kd) revealed its selectivity towards Cd^(2+) compared to other metal ions. This property of the composite was utilized for designing Cd^(2+) selective membrane electrode. Several important physical parameters of the ion-selective electrode were determined, such as Nernstian slope(32.32 mV·decade^(-1)), working pH range was 2.0–4.0 and response time was found ~ 17 s.The analytical utility of this wave like composite membrane electrode was as, indicator electrode in various potentiometric titrations.
基金The authors gratefully thank the National Natural Science Foundation of China (No. 29874034, 29992530, 29873060) and Dow Corning Corporation for their financial support.
文摘Fluorescence spectra of ladderlike polyphenylsilsesquioxane (LPPS) and ladderlike 1,4-phenylene-bridged polyvinylsiloxane (LPPVS) have been measured as a function of temperature (4-55 degreesC), in dilute tetrahydrofuran solution. The excimer (IF) to monomer (I-M) intensity ratio (I-E/I-M) of LPPS dilute solution shows a double linear Arrhenius plot with a break point ascribable to a transition temperature Tt. This behavior has not been found for single chain polyorganosiloxanes. When In/(E) of LPPS was plotted against 1/T, it also gave a double linear plot with one break point, which was found in single chain polyorganosiloxanes. The different behaviors between LPPS and single chain polyorganosiloxanes may be mainly attributed to the relatively rigid double-chain macromolecular backbone of LPPS. However, the 1n(I-E/I-M) of dilute LPPVS solution versus 1/T shows a simple linear variation with a positive slope which confirms our proposition. The difference between the fluorescence results of LPPS and those of LPPVS may possibly derive from their structure differences and cooperative motion in backbone chain bonds.
文摘Poly(arylene ether diketone)s were prepared by the aromatic nucleophilic displacement reaction of 4,4'-difluorobenzil with different bisphenols in the presence of anhydrous potassium carbonate in diphenylsulfone at elevated temperature. The polymers obtained had inherent viscosity of 0.51 similar to 0.63 dL/g, and exhibited glass transition temperature ranging from 136 similar to 217 degrees C mainly depending on the bisphenols used in the polymer synthesis. Thermogravimetry of these polymers showed excellent thermal stability, indicating that 10% weight losses of the polymers were observed in the range above 428 degrees C and 438 degrees C in air and nitrogen, respectively. The mechanical properties of these polymers were also described and the permeability of five polymers for H-2, O-2 and N-2 was determined at 30 degrees C.
基金This project was supported by the National Natural Science Foundation of China (No. 59483001).
文摘The one plus one (1 + 1) mode of hydrosilation reaction of ladderlike cis-isotatic polyallylsilsesquioxane (Allyl-T) and polyhydrosilsesquioxane (H-T) using dicyclopentadienylplatinumdichloride (Cp2PtCl2) as the catalyst leads to the formation of a new polyorganosiloxane (POS). The presence of nanoscale tubular structure in the product POS was preliminarily proved by IR, H-1-NMR, differential scanning calorimetry (DSC), X-ray diffraction (XRD), gel permeation chromatography (GPC), atomic force microscopy (AFM) and molecular simulation.
基金This project was supported by NSFC(59483001 & 29574187)& Chinese Academy of Sciences(KJ-952-S1-508)
文摘The hydrosilylation reaction of ladderlike polyvinylsilsesquioxane (Vi-T) with 1, 1, 3, 3-tetramethyldisiloxane (H-MM) catalyzed by dicyclopentadienyl-dichloroplatinium (Cp2PtCl2) was carried out well in tetrahydrofuran (THF) to produce a soluble white solid. This product was characterized by IR, H-1-NMR, C-13-NMR, Si-29-NMR, DSC, X-ray diffraction method, gel permeation chromatography (GPC), vapour pressure osmometry (VPO), atomic force microscopy (AFM) and molecular simulation. These results prove that the product contains nanoscale tubular structure.
基金The authors are grateful to the National Natural Science Foundation of China(No.29874034),Dow Coming Corporation and Institute of Materials Research and Engineering,National University of Singapore for their financial supports.
文摘A novel soluble ladderlike polysilsesquioxane containing reactive ester groups (Ester-T) was synthesized for the first time by stepwise coupling polymerization including preammonolysis, controlled hydrolysis and polycondensation. The monomer, 3-trichlorosilylpropoxy 4-acetoxybenzoate (M), was synthesized by hydrosilylation of allyloxy 4-acetoxybenzoate with trichlorosilane in the presence of dicyclopentadienylplatinum (II) chloride (Cp2PtCl2) catalyst. Combination of FTIR, H-1-NMR, C-13-NMR, Si-29-NMR, XRD, DSC, TGA and VPO methods was used to demonstrate that the polymer obtained has an ordered ladderlike structure. The synthesized Ester-T may have promising applications as a precursor of advanced functional polymers.
基金This project was co-funded by National Natural Science Foundation of China,Research Foundation of Molecular Science Centre and Director of Institute of Chemistry,Chinese Academy of Sciences and Foundation of Organic Solid Laboratory,Chinese Academy of Sc
文摘Fluorescent molecules - p-dimethylaminobenzonitrile (DMABN) and trans-stilbene (TSB ) - were used as probes to investigate the inner structure of the nanotubular cavities contained in a new polyorganosiloxane (POS) which was prepared by the hydrosilylation coupling reaction of cis-isotactic ladderlike polyvinylsilsesquioxane (Vi-T) with 1,1,3,3-tetramethyldisiloxane (H-MM) as coupling agent in the presence of catalyst dicyclopentadienyldichloroplatinum (Cp2PtCl2). The results from FTIR spectra and fluorescence spectra in combination with molecular simulation reveal that the cross-section of the nanotubular cavity is nearly rectangular in shape, and is about 0.62 nm in width and about 0.38 nm in height. This work gains in-depth knowledge into the inner structure of the nanotubular cavities of POS and furthermore provides a guide to the selection of proper guest molecules in constructing functional supramolecular clathrate based upon POS.
文摘The target compound BCH-189 was synthesized with high yield via four steps from benzoyloxy acetylaldehyde and p-dithiane-2,5-diol as starting materials. The synthetic route is preferable to what literature reported.
文摘Six new optically active poly(amide-imide)s (5a-f) were synthesized through the direct polycondensation reaction of N,N′-(4,4′- diphthaloyl)-bis-L-leucine (3) with six hydantoin derivatives (4a-f). Tripbenyl phosphite (TPP)/pyridine in the presence of calcium chloride (CaCl2) and N-methyl-2-pyrrolidone (NMP) were successfully applied for direct polycondensation. The polycondensation reactions produce a series of new poly(amide-imide)s (5a-f) in high yields, and inherent viscosity between 0.42 and 0,55 dL/g. The resulting poly(amide-imide)s (5a-f) were characterized by elemental analysis, viscosity measurements, thermal gravimetric analysis (TGA and DTG), solubility test and FT-IR spectroscopy.
文摘Electrochemical polymerizations of various ratios of pyrrole and methylpyrrole monomers were performed in aqueous toluene-4-sulfinic acid sodium salt (T4SNa) electrolyte, using galvanostatic method. pH of electrolyte was adjusted by p-toluene sulfonic acid (PTSA). In order to prevent corrosion of mild steel substrates during coating deposition, specimens were pretreated in 0.5M oxalic acid solution, employing galvanostatic method. This would passivate the steel substrate and facilitate the coating process as well. Corrosion resistance of coated substrates was investigated in 1M NaCl solution using Tafel polarization technique. In addition, using scanning electron microscopy (SEM), morphological characterization of coatings produced, was investigated. Regarding the corrosion characteristics, results obtained revealed that the ratio of 1 to 1 (Pyrrole/Methylpyrrole) could play an important role.
基金This work was supported by the Research Affairs Division of Arak University.
文摘Eight novel poly(amide-imide)s were synthesized under microwave irradiation by using a domestic microwaveoven from the polycondensation reactions of N.N'-(pyromellitoyl)-bis-L-alanine diacid chloride(1)with eight differentderivatives of hydantoin compounds(2a-h)in the presence of a small amount of a polar organic medium such as o-cresol.The polycondensation proceeded rapidly,compared with the conventional solution polycondensation and was completedwithin 8-10 min,producing a series of new poly(amide-imide)s(3a-h)with inherent viscosities about 0.35-0.68 dL/g inhigh yields.The obtained PAIs(3a-h)were fully characterized by means of FT-IR spectroscopy,elemental analyses,inherentviscosity(ηinh),solubility and specific rotation measurements.All of the resulting polymers show optical rotation and areoptically active.Thermal properties of the poly(amide-imide)s were investigated by using thermal gravimetric analysis(TGA).