The selection of wave force models will significantly impact the structural responses of floating wind turbines.In this study,comparisons of wave force model effects on the structural responses and fatigue loads of a ...The selection of wave force models will significantly impact the structural responses of floating wind turbines.In this study,comparisons of wave force model effects on the structural responses and fatigue loads of a semi-submersible floating wind turbine(SFWT)were conducted.Simulations were performed by employing the Morison equation(ME)with linear or second-order wave kinematics and potential flow theory(PFT)with first-or second-order wave forces.A comparison of regular waves,irregular waves,and coupled wind/waves analyses with the experimental data showed that many of the simulation results and experimental data are relatively consistent.However,notable discrepancies are found in the response amplitude operators for platform heave,tower base bending moment,and tension in mooring lines.PFT models give more satisfactory results of heave but more significant discrepan-cies in tower base bending moment than the ME models.In irregular wave analyses,low-frequency resonances were captured by PFT models with second-order difference-frequency terms,and high-frequency resonances were captured by the ME models or PFT models with second-order sum-frequency terms.These force models capture the response frequencies but do not reasonably predict the response amplitudes.The coupled wind/waves analyses showed more satisfactory results than the wave-only analyses.However,an important detail to note is that this satisfactory result is based on the overprediction of wind-induced responses.展开更多
Monitoring and prediction of rockburst remain to be worldwide challenges in geotechnical engineering.In hydropower,transportation and other engineering fields in China,more deep,long and large tunnels have been under ...Monitoring and prediction of rockburst remain to be worldwide challenges in geotechnical engineering.In hydropower,transportation and other engineering fields in China,more deep,long and large tunnels have been under construction in recent years and underground caverns are more evidently featured by "long,large,deep and in group",which bring in many problems associated with rock mechanics problems at great depth,especially rockburst.Rockbursts lead to damages to not only underground structures and equipments but also personnel safety.It has been a major technical bottleneck in future deep underground engineering in China.In this paper,compared with earthquake prediction,the feasibility in principle of monitoring and prediction of rockbursts is discussed,considering the source zones,development cycle and scale.The authors think the feasibility of rockburst prediction can be understood in three aspects:(1) the heterogeneity of rock is the main reason for the existence of rockburst precursors;(2) deformation localization is the intrinsic cause of rockburst;and(3) the interaction between target rock mass and its surrounding rock mass is the external cause of rockburst.As an engineering practice,the application of microseismic monitoring techniques during tunnel construction of Jinping II Hydropower Station was reported.It is found that precursory microcracking exists prior to most rockbursts,which could be captured by the microseismic monitoring system.The stress concentration is evident near structural discontinuities(such as faults or joints),which shall be the focus of rockburst monitoring.It is concluded that,by integrating the microseismic monitoring and the rock failure process simulation,the feasibility of rockburst prediction is expected to be enhanced.展开更多
The conventional 2D design method of culverts separated from 3D model cannot directly visualize the process of creating and renewal process. This paper explores graphics application framework of Open GL based on MFC, ...The conventional 2D design method of culverts separated from 3D model cannot directly visualize the process of creating and renewal process. This paper explores graphics application framework of Open GL based on MFC, developing the 3D visualization system of hydraulic culvert. This system effectively integrats with building design, structural design and parametric design and image processing technology. The results can be shown by 3D visualization design.展开更多
Various regions are becoming increasingly vulnerable to the increased frequency of floods due to the recent changes in climate and precipitation patterns throughout the world.As a result,specific infrastructures,notab...Various regions are becoming increasingly vulnerable to the increased frequency of floods due to the recent changes in climate and precipitation patterns throughout the world.As a result,specific infrastructures,notably bridges,would experience significant flooding for which they were not intended and would be submerged.The flow field and shear stress distribution around tandem bridge piers under pressurized flow conditions for various bridge deck widths are examined using a series of three-dimensional(3D)simulations.It is indicated that scenarios with a deck width to pier diameter(Ld/p)ratio of 3 experience the highest levels of turbulent disturbance.In addition,maximum velocity and shear stresses occur in cases with Ld/p equal to 6.Results indicate that increasing the number of piers from 1 to 2 and 3 results in the increase of bed shear stress by 24%and 20%respectively.Finally,five machine learning algorithms,including Decision Trees(DT),Feed Forward Neural Networks(FFNN),and three Ensemble models,are implemented to estimate the flow field and the turbulent structure.Results indicated that the highest accuracy for estimation of U,and W,were obtained using AdaBoost ensemble with R2=0.946 and 0.951,respectively.Besides,the Random Forest algorithm outperformed AdaBoost slightly in the estimation of V and turbulent kinetic energy(TKE)with R2=0.894 and 0.951,respectively.展开更多
The interaction between axially adjacent defects is more significant than that between circumferentially aligned defects.However,the existing failure pressure assessment methods cannot accurately predict the failure p...The interaction between axially adjacent defects is more significant than that between circumferentially aligned defects.However,the existing failure pressure assessment methods cannot accurately predict the failure pressure of axial adjacent defects.In the paper,the finite element model is adopted to analyze the influence of defect size,distribution mode and spacing between adjacent defects on failure pressure.A new failure pressure evaluation method is proposed by establishing the effective depth calculation model of corrosion colony with different distribution model.The burst test of X52 pipeline is carried out to verify the applicability of the method.It shows that the results of new method are consistent with the test results of pipeline with various defects and steel grades.展开更多
Extreme waves have a profound impact on coastal infrastructure;thus,understanding the variation law of risky analysis and disaster prevention in coastal zones is necessary.This paper analyzed the spatiotemporal charac...Extreme waves have a profound impact on coastal infrastructure;thus,understanding the variation law of risky analysis and disaster prevention in coastal zones is necessary.This paper analyzed the spatiotemporal characteristics of extreme wave heights adjacent to China from 1979 to 2018 based on the ERA5 datasets.Nonstationary extreme value analysis is undertaken in eight repre-sentative points to investigate the trends in the values of 50-and 100-year wave heights.Results show that the mean value of extreme waves is the largest in the eastern part of Taiwan Island and the smallest in the Bohai Sea from 1979 to 2018.Only the extreme wave height in the northeastern part of Taiwan Island shows a significant increase trend in the study area.Nonstationary analysis shows remarkable variations in the values of 50-and 100-year significant wave heights in eight points.Considering the annual mean change,E1,E2,S1,and S2 present an increasing trend,while S3 shows a decreasing trend.Most points for the seasonal mean change demon-strate an increasing trend in spring and winter,while other points show a decreasing trend in summer and autumn.Notably,the E1 point growth rate is large in autumn,which is related to the change in typhoon intensity and the northward movement of the typhoon path.展开更多
The influence of coarse aggregate content on concrete properties was investigated.From the perspective of Frame Concrete Theory,six groups concrete were produced with the same proportion except for coarse aggregate co...The influence of coarse aggregate content on concrete properties was investigated.From the perspective of Frame Concrete Theory,six groups concrete were produced with the same proportion except for coarse aggregate content,with coarse aggregate content of 0%,40%,50%,60%,75%,and 80%,respectively.Slump,compressive and flexural tensile strengths,elastic modulus,and water penetration were tested to research the effect of coarse aggregate content on concrete.The experimental results reveal that slump reduces with increasing of coarse aggregate content,while compressive strength,elastic modulus and flexural tensile strength increase with the coarse aggregate content increasing,and water penetration reduces with coarse aggregate content increasing before 75% then increased.Workability,strength,durability and economical indexes system were established to optimize the coarse aggregate content in concrete based on efficacy coefficient method.The optimization results show that when coarse aggregate content is 60%,the system efficacy coefficient reaches to 0.89,and it expresses the better comprehensive performance.展开更多
The Zipingpu Concrete Faced Rockfill Dam (CFRD) was obviously damaged during the Wenchuan earthquake in 2008. A wide range of dislocations occurred along the horizontal construction joints at EL. 845m, between the fac...The Zipingpu Concrete Faced Rockfill Dam (CFRD) was obviously damaged during the Wenchuan earthquake in 2008. A wide range of dislocations occurred along the horizontal construction joints at EL. 845m, between the face slabs constructed in the second and third stages. The maximum displacement of the dislocations reached 17cm. In this study, the slab dislocations were investigated using finite element (FE) analysis. The method based on strain potential was applied to compute the permanent deformation of the Zipingpu Dam during the Wenchuan earthquake. The calculated magnitude of the slab dislocation showed good agreements with the field measurements. The dislocation mechanism was discussed. The results show that the dislocation of the concrete slab is a subsequent damage after the permanent deformation of the rockfill materials. The effects of the shear strength and the direction of the construction joints, the reservoir water level and the seismic waves were studied. The shear strength and the direction of the construction joints, reservoir water level and have a significant effect on the dislocation displacement. The dislocation can be effectively reduced by measures such as changing the direction of the construction joints or improving the shear strength at the horizontal joints.展开更多
The effect of recycled coarse aggregate on concrete compressive strength was investigated based on the concrete skeleton theory. For this purpose, 30 mix proportions of concrete with target cube compressive strength r...The effect of recycled coarse aggregate on concrete compressive strength was investigated based on the concrete skeleton theory. For this purpose, 30 mix proportions of concrete with target cube compressive strength ranging from 20 to 60 MPa were cast with normal coarse aggregate and recycled coarse aggregate from different strength parent concretes. Results of 28-d test show that the strength of different types of recycled aggregate affects the concrete strength obviously. The coarse aggregate added to mortar matrix plays a skeleton role and improves its compressive strength. The skeleton effect of coarse aggregate increases with the increasing strength of coarse aggregate, and normal coarse aggregate plays the highest, whereas the lowest concrete strength occurs when using the weak recycled coarse aggregate. There is a linear relationship between the concrete strength and the corresponding mortar matrix strength. Coarse aggregate skeleton formula is established, and values from experimental tests match the derived expressions.展开更多
In the last decade, three dimensional discontinuous deformation analyses (3D DDA) has attracted more and more attention of researchers and geotechnical engineers worldwide. The original DDA formulation utilizes a line...In the last decade, three dimensional discontinuous deformation analyses (3D DDA) has attracted more and more attention of researchers and geotechnical engineers worldwide. The original DDA formulation utilizes a linear displacement function to describe the block movement and deformation, which would cause block expansion under rigid body rotation and thus limit its capability to model block deformation. In this paper, 3D DDA is coupled with tetrahedron finite elements to tackle these two problems. Tetrahedron is the simplest in the 3D domain and makes it easy to implement automatic discretization, even for complex topology shape. Furthermore, element faces will remain planar and element edges will remain straight after deformation for tetrahedron finite elements and polyhedral contact detection schemes can be used directly. The matrices of equilibrium equations for this coupled method are given in detail and an effective contact searching algorithm is suggested. Validation is conducted by comparing the results of the proposed coupled method with that of physical model tests using one of the most common failure modes, i.e., wedge failure. Most of the failure modes predicted by the coupled method agree with the physical model results except for 4 cases out of the total 65 cases. Finally, a complex rockslide example demonstrates the robustness and versatility of the coupled method.展开更多
In this study,characteristics of flow field and wave propagation near submerged breakwater on a sloping bed are investigated with numerical model. The governing equations of the vertical twodimensional model are Reyno...In this study,characteristics of flow field and wave propagation near submerged breakwater on a sloping bed are investigated with numerical model. The governing equations of the vertical twodimensional model are Reynolds Averaged Navier Stokes equations. The Reynolds stress terms are closed by a nonlinear k ε turbulence transportation model. The free surface is traced through the PILC-VOF method. The proposed numerical model is verified with experimental results. The numerical result shows that the wave profile may become more asymmetrical when wave propa-gates over breakwater. When wave crest propagates over breakwater,the anticlockwise vortex may generate. On the contrary,when wave hollow propagates over breakwater,the clockwise vortex may generate. Meanwhile,the influenced zone of vortex created by wave crest is larger than that created by wave hollow. All the maximum values of the turbulent kinetic energy,turbulent dissi-pation and eddy viscosity occur on the top of breakwater. Both the turbulent dissipation and eddy viscosity increase as the turbulent kinetic energy increases. Wave energy may rapidly decrease near the breakwater because turbulent dissipation increases and energy in lower harmonics is transferred into higher harmonics.展开更多
Added mass and damping coefficients are very important in hydrodynamic analysis of naval structures. In this paper,a double submerged inclined plates with ‘/\' configuration is firstly considered. By use of the b...Added mass and damping coefficients are very important in hydrodynamic analysis of naval structures. In this paper,a double submerged inclined plates with ‘/\' configuration is firstly considered. By use of the boundary element method(BEM) based on Green function with the wave term, the radiation problem of this special type structure is investigated. The added mass and damping coefficients due to different plate lengths and inclined angles are obtained. The results show that: the added mass and damping coefficients for sway are the largest. Heave is the most sensitive mode to inclined angles. The wave frequencies of the maximal added mass and damping coefficients for sway and roll are the same.展开更多
Structural health monitoring is important to ensuring the health and safety of dams.An inverse analysis method based on a novel hybrid fireworks algorithm (FWA) and the radial basis function (RBF) model is proposed to...Structural health monitoring is important to ensuring the health and safety of dams.An inverse analysis method based on a novel hybrid fireworks algorithm (FWA) and the radial basis function (RBF) model is proposed to diagnose the health condition of concrete dams.The damage of concrete dams is diagnosed by identifying the elastic modulus of materials using the displacement changes at different reservoir water levels.FWA is a global optimization intelligent algorithm.The proposed hybrid algorithm combines the FWA with the pattern search algorithm, which has a high capability for local optimization.Examples of benchmark functions and pseudo-experiment examples of concrete dams illustrate that the hybrid FWA improves the convergence speed and robustness of the original algorithm.To address the time consumption problem, an RBF-based surrogate model was established to replace part of the finite element method in inverse analysis.Numerical examples of concrete dams illustrate that the use of an RBF-based surrogate model significantly reduces the computation time of inverse analysis with little influence on identification accuracy.The presented hybrid FWA combined with the RBF network can quickly and accurately determine the elastic modulus of materials, and then determine the health status of the concrete dam.展开更多
As a new type of submarine pipeline, the piggyback pipeline has been gradually adopted in engineering practice to enhance the performance and safety of submarine pipelines. However, limited simulation work and few exp...As a new type of submarine pipeline, the piggyback pipeline has been gradually adopted in engineering practice to enhance the performance and safety of submarine pipelines. However, limited simulation work and few experimental studies have been published on the scour around the piggyback pipeline under steady current. This study numerically and experimentally investigates the local scour of the piggyback pipe under steady current. The influence of prominent factors such as pipe diameter, inflow Reynolds number, and gap between the main and small pipes, on the maximum scour depth have been examined and discussed in detail. Furthermore, one formula to predict the maximum scour depth under the piggyback pipeline has been derived based on the theoretical analysis of scour equilibrium. The feasibility of the proposed formula has been effectively calibrated by both experimental data and numerical results. The findings drawn from this study are instructive in the future design and application of the piggyback pipeline.展开更多
To determine the grid resolutions of the WRF model in the typhoon simulation,some sensitivity analysis of horizontal and vertical resolutions in different conditions has been carried out.Different horizontal resolutio...To determine the grid resolutions of the WRF model in the typhoon simulation,some sensitivity analysis of horizontal and vertical resolutions in different conditions has been carried out.Different horizontal resolutions(5,10,20,30 km),nesting grids(15 and 5 km),different vertical resolutions(35-layers,28-layers,20-layers)and different top maximum pressures(1 000,2 000,3 500,5 000 Pa)had been used in the mesoscale numerical model WRF to simulate the Typhoon Kai-tak.The simulation results of typhoon track,wind speed and sea level pressure at different horizontal and vertical resolutions have been compared and analyzed.The horizontal and vertical resolutions of the model have limited effect on the simulation effect of the typhoon track.Different horizontal and vertical resolutions have obvious effects on typhoon strength(defined by wind speed)and intensity(defined by sea level pressure,SLP),especially for sea level pressure.The typhoon intensity simulated by the high-resolution model is closer to the real situation and the nesting grids can improve computational accuracy and efficiency.The simulation results affected by vertical resolution using 35-layers is better than the simulation results using 20-layers and 28-layers simulations.Through comparison and analysis,the horizontal and vertical resolutions of WRF model are finally determined as follows:the two-way nesting grid of 15 and 5 km is comprehensively determined,and the vertical layers is 35-layers,the top maximum pressure is 2 000 Pa.展开更多
The simulating waves nearshore(SWAN) model has typically been designed for wave simulations in near-shore regions. In this study, the model's applicability to the simulation of typhoon waves in the South China Sea...The simulating waves nearshore(SWAN) model has typically been designed for wave simulations in near-shore regions. In this study, the model's applicability to the simulation of typhoon waves in the South China Sea(SCS) was evaluated. A blended wind field, consisting of an interior domain based on Fujita's model and an exterior domain based on Takahashi's model, was used as the driving wind field. The waves driven by Typhoon Kai-tak over the SCS that occurred in 2012 were selected for the numerical simulation research. Sensitivity analyses of time step, grid resolution, and angle resolution were performed in order to obtain optimal model settings. Through sensitivity analyses, it can be found that the time step has a large influence on the results, while grid resolution and angle resolution have a little effect on the results.展开更多
Vertical axis tidal current turbine is a promising device to extract energy from ocean current. One of the important components of the turbine is the connecting arm, which can bring about a significant effect on the p...Vertical axis tidal current turbine is a promising device to extract energy from ocean current. One of the important components of the turbine is the connecting arm, which can bring about a significant effect on the pressure distribution along the span of the turbine blade, herein we call it 3D effect. However, so far the effect is rarely reported in the research, moreover, in numerical simulation. In the present study, a 3D numerical model of the turbine with the connecting arm was developed by using FLUENT software compiling the UDF(User Defined Function) command. The simulation results show that the pressure distribution along the span of blade with the connecting arm model is significantly different from those without the connecting arm. To facilitate the validation of numerical model, the laboratory experiment has been carried out by using three different types of NACA aerofoil connecting arm and circle section connecting arm. And results show that the turbine with NACA0012 connecting arm has the best start-up performance which is 0.346 m/s and the peak point of power conversion coefficient is around 0.33. A further study has been performed and a conclusion is drawn that the aerofoil and thickness of connecting arm are the most important factors on the power conversion coefficient of the vertical axis tidal current turbine.展开更多
The coupling numerical model of wave interaction with porous medium is used to study waveinduced pore water pressure in high permeability seabed.In the model,the wave field solver is based on the two dimensional Reyno...The coupling numerical model of wave interaction with porous medium is used to study waveinduced pore water pressure in high permeability seabed.In the model,the wave field solver is based on the two dimensional Reynolds-averaged Navier-Stokes(RANS) equations with a k-ε closure,and Forchheimer equations are adopted for flow within the porous media.By introducing a Velocity-Pressure Correction equation for the wave flow and porous flow,a highly efficient coupling between the two flows is implemented.The numerical tests are conducted to study the effects of seabed thickness,porosity,particle size and intrinsic permeability coefficient on regular wave and solitary wave-induced pore water pressure response.The results indicate that,as compared with regular wave-induced,solitary wave-induced pore water pressure has larger values and stronger action on seabed with different parameters.The results also clearly show the flow characteristics of pore water flow within seabed and water wave flow on seabed.The maximum pore water flow velocities within seabed under solitary wave action are higher than those under regular wave action.展开更多
This paper investigates the wave attenuation properties of the double trapezoidal submerged breakwaters on the flat-bed by conducting physical experiments subjected to linear and cnoidal incident waves.The method of G...This paper investigates the wave attenuation properties of the double trapezoidal submerged breakwaters on the flat-bed by conducting physical experiments subjected to linear and cnoidal incident waves.The method of Goda's two points is used to separate the heights of incident,reflected and transmitted waves based on the experimental data.The possible factors affecting the wave attenuation properties of the double trapezoidal submerged breakwaters(i.e.,the relative submerged water depth,relative breakwater spacing,wave steepness and relative wave height) are investigated with respect to the reflection and transmission coefficients.The results show that there is a range,within which the breakwater spacing has little impact on the reflection coefficient,and the transmission coefficient tends to be a constant.The influence of the wave steepness is reduced while the breakwater spacing is too large or too small.Within the range of the relative wave height tested in this study,the reflection and transmission coefficients increase and decrease with the relative wave height,respectively.The double trapezoidal submerged breakwaters model indicates a good attenuation effect for larger wave steepness,big relative wave height and within the range of the relative breakwater spacing between 12.5 and 14 according to linear and cnoidal waves.The changes of wave energy spectra between the double submerged breakwaters on the flat-bed are investigated by the fast Fourier transform(FFT) method,showing that wave energy dissipation can be reached more effectively when the relative breakwater spacing is 12.5.展开更多
Owing to the stochastic behavior of earthquakes and complex crustal structure,wave type and incident direction are uncertain when seismic waves arrive at a structure.In addition,because of the different types of the s...Owing to the stochastic behavior of earthquakes and complex crustal structure,wave type and incident direction are uncertain when seismic waves arrive at a structure.In addition,because of the different types of the structures and terrains,the traveling wave effects have different influences on the dynamic response of the structures.For the tall concrete-faced rockfill dam(CFRD),it is not only built in the complex terrain such as river valley,but also its height has reached 300 m level,which puts forward higher requirements for the seismic safety of the anti-seepage system mainly comprising concrete face slabs,especially the accurate location of the weak area in seism.Considering the limitations of the traditional uniform vibration analysis method,we implemented an efficient dynamic interaction analysis between a tall CFRD and its foundation using a non-uniform wave input method with a viscous-spring artificial boundary and equivalent nodal loads.This method was then applied to investigate the dynamic stress distribution on the concrete face slabs for different seismic wave types and incident directions.The results indicate that dam-foundation interactions behave differently at different wave incident angles,and that the traveling wave effect becomes more evident in valley topography.Seismic wave type and incident direction dramatically influenced stress in the face slab,and the extreme stress values and distribution law will vary under oblique wave incidence.The influence of the incident direction on slab stress was particularly apparent when SH-waves arrived from the left bank.Specifically,the extreme stress values in the face slab increased with an increasing incident angle.Interestingly,the locations of the extreme stress values changed mainly along the axis of the dam,and did not exhibit large changes in height.The seismic safety of CFRDs is therefore lower at higher incident angles from an anti-seepage perspective.Therefore,it is necessary to consider both the seismic wave type and incident direction during seismic capacity evaluations of tall CFRDs.展开更多
基金funded by the National Natural Science Foundation of China(No.51809135)the Shandong Provincial Natural Science Foundation(No.ZR2018BEE 047)+1 种基金the National Natural Science Foundation of China–Shandong Joint Fund(No.U2006229)the SKL of HESS(No.HESS-1808).
文摘The selection of wave force models will significantly impact the structural responses of floating wind turbines.In this study,comparisons of wave force model effects on the structural responses and fatigue loads of a semi-submersible floating wind turbine(SFWT)were conducted.Simulations were performed by employing the Morison equation(ME)with linear or second-order wave kinematics and potential flow theory(PFT)with first-or second-order wave forces.A comparison of regular waves,irregular waves,and coupled wind/waves analyses with the experimental data showed that many of the simulation results and experimental data are relatively consistent.However,notable discrepancies are found in the response amplitude operators for platform heave,tower base bending moment,and tension in mooring lines.PFT models give more satisfactory results of heave but more significant discrepan-cies in tower base bending moment than the ME models.In irregular wave analyses,low-frequency resonances were captured by PFT models with second-order difference-frequency terms,and high-frequency resonances were captured by the ME models or PFT models with second-order sum-frequency terms.These force models capture the response frequencies but do not reasonably predict the response amplitudes.The coupled wind/waves analyses showed more satisfactory results than the wave-only analyses.However,an important detail to note is that this satisfactory result is based on the overprediction of wind-induced responses.
基金Supported by the State Key Program of the National Natural Science Foundation of China(40638040)the Major Program of the National Natural Science Foundation of China(50820125405)
文摘Monitoring and prediction of rockburst remain to be worldwide challenges in geotechnical engineering.In hydropower,transportation and other engineering fields in China,more deep,long and large tunnels have been under construction in recent years and underground caverns are more evidently featured by "long,large,deep and in group",which bring in many problems associated with rock mechanics problems at great depth,especially rockburst.Rockbursts lead to damages to not only underground structures and equipments but also personnel safety.It has been a major technical bottleneck in future deep underground engineering in China.In this paper,compared with earthquake prediction,the feasibility in principle of monitoring and prediction of rockbursts is discussed,considering the source zones,development cycle and scale.The authors think the feasibility of rockburst prediction can be understood in three aspects:(1) the heterogeneity of rock is the main reason for the existence of rockburst precursors;(2) deformation localization is the intrinsic cause of rockburst;and(3) the interaction between target rock mass and its surrounding rock mass is the external cause of rockburst.As an engineering practice,the application of microseismic monitoring techniques during tunnel construction of Jinping II Hydropower Station was reported.It is found that precursory microcracking exists prior to most rockbursts,which could be captured by the microseismic monitoring system.The stress concentration is evident near structural discontinuities(such as faults or joints),which shall be the focus of rockburst monitoring.It is concluded that,by integrating the microseismic monitoring and the rock failure process simulation,the feasibility of rockburst prediction is expected to be enhanced.
文摘The conventional 2D design method of culverts separated from 3D model cannot directly visualize the process of creating and renewal process. This paper explores graphics application framework of Open GL based on MFC, developing the 3D visualization system of hydraulic culvert. This system effectively integrats with building design, structural design and parametric design and image processing technology. The results can be shown by 3D visualization design.
基金supported by the National Natural Science Foundation of China (Grant Nos.52179060 and 51909024).
文摘Various regions are becoming increasingly vulnerable to the increased frequency of floods due to the recent changes in climate and precipitation patterns throughout the world.As a result,specific infrastructures,notably bridges,would experience significant flooding for which they were not intended and would be submerged.The flow field and shear stress distribution around tandem bridge piers under pressurized flow conditions for various bridge deck widths are examined using a series of three-dimensional(3D)simulations.It is indicated that scenarios with a deck width to pier diameter(Ld/p)ratio of 3 experience the highest levels of turbulent disturbance.In addition,maximum velocity and shear stresses occur in cases with Ld/p equal to 6.Results indicate that increasing the number of piers from 1 to 2 and 3 results in the increase of bed shear stress by 24%and 20%respectively.Finally,five machine learning algorithms,including Decision Trees(DT),Feed Forward Neural Networks(FFNN),and three Ensemble models,are implemented to estimate the flow field and the turbulent structure.Results indicated that the highest accuracy for estimation of U,and W,were obtained using AdaBoost ensemble with R2=0.946 and 0.951,respectively.Besides,the Random Forest algorithm outperformed AdaBoost slightly in the estimation of V and turbulent kinetic energy(TKE)with R2=0.894 and 0.951,respectively.
基金supported by the Key Scientific Research Projects of Colleges and Universities in Henan Province(Grant No.23A560013)the National Key R&D Program of the“14th Five-Year Plan”(Grant No.2022YFC3801001)+1 种基金Henan Provincial Youth Science Foundation(Grant No.232300421328)the Leading Talents in Zhongyuan Technology Innovation(Grant No.234200510014).
文摘The interaction between axially adjacent defects is more significant than that between circumferentially aligned defects.However,the existing failure pressure assessment methods cannot accurately predict the failure pressure of axial adjacent defects.In the paper,the finite element model is adopted to analyze the influence of defect size,distribution mode and spacing between adjacent defects on failure pressure.A new failure pressure evaluation method is proposed by establishing the effective depth calculation model of corrosion colony with different distribution model.The burst test of X52 pipeline is carried out to verify the applicability of the method.It shows that the results of new method are consistent with the test results of pipeline with various defects and steel grades.
基金support of the Natural Science Foundation of China(No.51909114)the Major Research Grant(Nos.U1806227,U1906231)from the National Natural Science Foundation of China(NSFC).
文摘Extreme waves have a profound impact on coastal infrastructure;thus,understanding the variation law of risky analysis and disaster prevention in coastal zones is necessary.This paper analyzed the spatiotemporal characteristics of extreme wave heights adjacent to China from 1979 to 2018 based on the ERA5 datasets.Nonstationary extreme value analysis is undertaken in eight repre-sentative points to investigate the trends in the values of 50-and 100-year wave heights.Results show that the mean value of extreme waves is the largest in the eastern part of Taiwan Island and the smallest in the Bohai Sea from 1979 to 2018.Only the extreme wave height in the northeastern part of Taiwan Island shows a significant increase trend in the study area.Nonstationary analysis shows remarkable variations in the values of 50-and 100-year significant wave heights in eight points.Considering the annual mean change,E1,E2,S1,and S2 present an increasing trend,while S3 shows a decreasing trend.Most points for the seasonal mean change demon-strate an increasing trend in spring and winter,while other points show a decreasing trend in summer and autumn.Notably,the E1 point growth rate is large in autumn,which is related to the change in typhoon intensity and the northward movement of the typhoon path.
基金Funded by the National Mega-project of Scientific & Technical Supporting Programs,Ministry of Science & Technology of China(No.2006BAJ04A04)the Education Department of Liaoning Province,China(No. 2008282)
文摘The influence of coarse aggregate content on concrete properties was investigated.From the perspective of Frame Concrete Theory,six groups concrete were produced with the same proportion except for coarse aggregate content,with coarse aggregate content of 0%,40%,50%,60%,75%,and 80%,respectively.Slump,compressive and flexural tensile strengths,elastic modulus,and water penetration were tested to research the effect of coarse aggregate content on concrete.The experimental results reveal that slump reduces with increasing of coarse aggregate content,while compressive strength,elastic modulus and flexural tensile strength increase with the coarse aggregate content increasing,and water penetration reduces with coarse aggregate content increasing before 75% then increased.Workability,strength,durability and economical indexes system were established to optimize the coarse aggregate content in concrete based on efficacy coefficient method.The optimization results show that when coarse aggregate content is 60%,the system efficacy coefficient reaches to 0.89,and it expresses the better comprehensive performance.
基金Science Fund for Creative Research Groups of the National Natural Science Foundation of China Under Grant No.51121005National Natural Science Foundation of China Under Grant No.51138001,90815024,50808032 and 50908032the Fundamental Research Funds for the Central Universities of China Under Grant No.DUT11ZD110
文摘The Zipingpu Concrete Faced Rockfill Dam (CFRD) was obviously damaged during the Wenchuan earthquake in 2008. A wide range of dislocations occurred along the horizontal construction joints at EL. 845m, between the face slabs constructed in the second and third stages. The maximum displacement of the dislocations reached 17cm. In this study, the slab dislocations were investigated using finite element (FE) analysis. The method based on strain potential was applied to compute the permanent deformation of the Zipingpu Dam during the Wenchuan earthquake. The calculated magnitude of the slab dislocation showed good agreements with the field measurements. The dislocation mechanism was discussed. The results show that the dislocation of the concrete slab is a subsequent damage after the permanent deformation of the rockfill materials. The effects of the shear strength and the direction of the construction joints, the reservoir water level and the seismic waves were studied. The shear strength and the direction of the construction joints, reservoir water level and have a significant effect on the dislocation displacement. The dislocation can be effectively reduced by measures such as changing the direction of the construction joints or improving the shear strength at the horizontal joints.
基金Supported by the National Mega-Project of Key Technology R&D Program in the 11th Five-Year Plan of China (No.2006BAJ04A04)the Education Department of Liaoning Province, China (No. 2008282)
文摘The effect of recycled coarse aggregate on concrete compressive strength was investigated based on the concrete skeleton theory. For this purpose, 30 mix proportions of concrete with target cube compressive strength ranging from 20 to 60 MPa were cast with normal coarse aggregate and recycled coarse aggregate from different strength parent concretes. Results of 28-d test show that the strength of different types of recycled aggregate affects the concrete strength obviously. The coarse aggregate added to mortar matrix plays a skeleton role and improves its compressive strength. The skeleton effect of coarse aggregate increases with the increasing strength of coarse aggregate, and normal coarse aggregate plays the highest, whereas the lowest concrete strength occurs when using the weak recycled coarse aggregate. There is a linear relationship between the concrete strength and the corresponding mortar matrix strength. Coarse aggregate skeleton formula is established, and values from experimental tests match the derived expressions.
基金supported by the Key Project of Chinese National Programs for Fundamental Research and Development(2010CB731502)the National Natural Science Foundation of China(50978745)
文摘In the last decade, three dimensional discontinuous deformation analyses (3D DDA) has attracted more and more attention of researchers and geotechnical engineers worldwide. The original DDA formulation utilizes a linear displacement function to describe the block movement and deformation, which would cause block expansion under rigid body rotation and thus limit its capability to model block deformation. In this paper, 3D DDA is coupled with tetrahedron finite elements to tackle these two problems. Tetrahedron is the simplest in the 3D domain and makes it easy to implement automatic discretization, even for complex topology shape. Furthermore, element faces will remain planar and element edges will remain straight after deformation for tetrahedron finite elements and polyhedral contact detection schemes can be used directly. The matrices of equilibrium equations for this coupled method are given in detail and an effective contact searching algorithm is suggested. Validation is conducted by comparing the results of the proposed coupled method with that of physical model tests using one of the most common failure modes, i.e., wedge failure. Most of the failure modes predicted by the coupled method agree with the physical model results except for 4 cases out of the total 65 cases. Finally, a complex rockslide example demonstrates the robustness and versatility of the coupled method.
基金The National Natural Science Foundation of China under contract Nos 50979008 and 50909009Program for Hunan Province Key Laboratory of WaterSediment Sciences & Flood Hazard Prevention and Open Research Fund Program of State Key Laboratory of Hydrology-Water Resources and Hydraulic Engineering,Hohai University No.2008490911
文摘In this study,characteristics of flow field and wave propagation near submerged breakwater on a sloping bed are investigated with numerical model. The governing equations of the vertical twodimensional model are Reynolds Averaged Navier Stokes equations. The Reynolds stress terms are closed by a nonlinear k ε turbulence transportation model. The free surface is traced through the PILC-VOF method. The proposed numerical model is verified with experimental results. The numerical result shows that the wave profile may become more asymmetrical when wave propa-gates over breakwater. When wave crest propagates over breakwater,the anticlockwise vortex may generate. On the contrary,when wave hollow propagates over breakwater,the clockwise vortex may generate. Meanwhile,the influenced zone of vortex created by wave crest is larger than that created by wave hollow. All the maximum values of the turbulent kinetic energy,turbulent dissi-pation and eddy viscosity occur on the top of breakwater. Both the turbulent dissipation and eddy viscosity increase as the turbulent kinetic energy increases. Wave energy may rapidly decrease near the breakwater because turbulent dissipation increases and energy in lower harmonics is transferred into higher harmonics.
基金financially supported by the National Key Basic Research Program of China(Grant No.2013CB036101)the National Natural Science Foundation of China(Grant No.51379037)
文摘Added mass and damping coefficients are very important in hydrodynamic analysis of naval structures. In this paper,a double submerged inclined plates with ‘/\' configuration is firstly considered. By use of the boundary element method(BEM) based on Green function with the wave term, the radiation problem of this special type structure is investigated. The added mass and damping coefficients due to different plate lengths and inclined angles are obtained. The results show that: the added mass and damping coefficients for sway are the largest. Heave is the most sensitive mode to inclined angles. The wave frequencies of the maximal added mass and damping coefficients for sway and roll are the same.
基金supported by the National Key Research and Development Program of China(Grants No.2016YFC0401600 and 2017YFC0404906)the National Natural Science Foundation of China(Grants No.51769033 and 51779035)the Fundamental Research Funds for the Central Universities(Grants No.DUT17ZD205 and DUT19LK14)
文摘Structural health monitoring is important to ensuring the health and safety of dams.An inverse analysis method based on a novel hybrid fireworks algorithm (FWA) and the radial basis function (RBF) model is proposed to diagnose the health condition of concrete dams.The damage of concrete dams is diagnosed by identifying the elastic modulus of materials using the displacement changes at different reservoir water levels.FWA is a global optimization intelligent algorithm.The proposed hybrid algorithm combines the FWA with the pattern search algorithm, which has a high capability for local optimization.Examples of benchmark functions and pseudo-experiment examples of concrete dams illustrate that the hybrid FWA improves the convergence speed and robustness of the original algorithm.To address the time consumption problem, an RBF-based surrogate model was established to replace part of the finite element method in inverse analysis.Numerical examples of concrete dams illustrate that the use of an RBF-based surrogate model significantly reduces the computation time of inverse analysis with little influence on identification accuracy.The presented hybrid FWA combined with the RBF network can quickly and accurately determine the elastic modulus of materials, and then determine the health status of the concrete dam.
基金financially supported by the National Key Research and Development Program of China (No.2017YFC1404700)the National Natural Science Foundation of China (Nos.51279189,51239001 and 51509023)the China Scholarship Council
文摘As a new type of submarine pipeline, the piggyback pipeline has been gradually adopted in engineering practice to enhance the performance and safety of submarine pipelines. However, limited simulation work and few experimental studies have been published on the scour around the piggyback pipeline under steady current. This study numerically and experimentally investigates the local scour of the piggyback pipe under steady current. The influence of prominent factors such as pipe diameter, inflow Reynolds number, and gap between the main and small pipes, on the maximum scour depth have been examined and discussed in detail. Furthermore, one formula to predict the maximum scour depth under the piggyback pipeline has been derived based on the theoretical analysis of scour equilibrium. The feasibility of the proposed formula has been effectively calibrated by both experimental data and numerical results. The findings drawn from this study are instructive in the future design and application of the piggyback pipeline.
基金The National Natural Science Foundation of China under contract Nos 51809023,51839002 and 51879015the Open Research Foundation of the Key Laboratory of the Pearl River Estuarine Dynamics and Associated Process Regulation,the Ministry of Water Resources under contract No.2018KJ03
文摘To determine the grid resolutions of the WRF model in the typhoon simulation,some sensitivity analysis of horizontal and vertical resolutions in different conditions has been carried out.Different horizontal resolutions(5,10,20,30 km),nesting grids(15 and 5 km),different vertical resolutions(35-layers,28-layers,20-layers)and different top maximum pressures(1 000,2 000,3 500,5 000 Pa)had been used in the mesoscale numerical model WRF to simulate the Typhoon Kai-tak.The simulation results of typhoon track,wind speed and sea level pressure at different horizontal and vertical resolutions have been compared and analyzed.The horizontal and vertical resolutions of the model have limited effect on the simulation effect of the typhoon track.Different horizontal and vertical resolutions have obvious effects on typhoon strength(defined by wind speed)and intensity(defined by sea level pressure,SLP),especially for sea level pressure.The typhoon intensity simulated by the high-resolution model is closer to the real situation and the nesting grids can improve computational accuracy and efficiency.The simulation results affected by vertical resolution using 35-layers is better than the simulation results using 20-layers and 28-layers simulations.Through comparison and analysis,the horizontal and vertical resolutions of WRF model are finally determined as follows:the two-way nesting grid of 15 and 5 km is comprehensively determined,and the vertical layers is 35-layers,the top maximum pressure is 2 000 Pa.
基金supported by the National Natural Science Foundation of China(Grants No.51239001,51179015,and 51509023)the Open Research Foundation of the Key Laboratory of the Pearl River Estuarine Dynamics and Associated Process Regulation,the Ministry of Water Resources(Grant No.2018KJ03)+1 种基金the Key Laboratory of Water-Sediment Sciences and Water Disaster Prevention of Hunan Province(Grant No.2017SS04)the Key Laboratory of Technology for Safeguarding of Maritime Rights and Interests and Application,State Oceanic Administration(Grant No.SCS1606)
文摘The simulating waves nearshore(SWAN) model has typically been designed for wave simulations in near-shore regions. In this study, the model's applicability to the simulation of typhoon waves in the South China Sea(SCS) was evaluated. A blended wind field, consisting of an interior domain based on Fujita's model and an exterior domain based on Takahashi's model, was used as the driving wind field. The waves driven by Typhoon Kai-tak over the SCS that occurred in 2012 were selected for the numerical simulation research. Sensitivity analyses of time step, grid resolution, and angle resolution were performed in order to obtain optimal model settings. Through sensitivity analyses, it can be found that the time step has a large influence on the results, while grid resolution and angle resolution have a little effect on the results.
基金financially supported by the State Oceanic Administration of China(Grant No.GHME2011CL01)the Program of State Key Laboratory of Coastal and Offshore Engineering(Grant No.LP1102)
文摘Vertical axis tidal current turbine is a promising device to extract energy from ocean current. One of the important components of the turbine is the connecting arm, which can bring about a significant effect on the pressure distribution along the span of the turbine blade, herein we call it 3D effect. However, so far the effect is rarely reported in the research, moreover, in numerical simulation. In the present study, a 3D numerical model of the turbine with the connecting arm was developed by using FLUENT software compiling the UDF(User Defined Function) command. The simulation results show that the pressure distribution along the span of blade with the connecting arm model is significantly different from those without the connecting arm. To facilitate the validation of numerical model, the laboratory experiment has been carried out by using three different types of NACA aerofoil connecting arm and circle section connecting arm. And results show that the turbine with NACA0012 connecting arm has the best start-up performance which is 0.346 m/s and the peak point of power conversion coefficient is around 0.33. A further study has been performed and a conclusion is drawn that the aerofoil and thickness of connecting arm are the most important factors on the power conversion coefficient of the vertical axis tidal current turbine.
基金The National Natural Science Foundation of China under contract Nos 50909009,50979008 and 41176072the Open Foundation of the State Key Laboratory of Coastal and Offshore Engineering in Dalian University of Technology of China under contract No. LP1004the Ph.D. Program Foundation of Ministry of Education of China under contract No. 20094316110002
文摘The coupling numerical model of wave interaction with porous medium is used to study waveinduced pore water pressure in high permeability seabed.In the model,the wave field solver is based on the two dimensional Reynolds-averaged Navier-Stokes(RANS) equations with a k-ε closure,and Forchheimer equations are adopted for flow within the porous media.By introducing a Velocity-Pressure Correction equation for the wave flow and porous flow,a highly efficient coupling between the two flows is implemented.The numerical tests are conducted to study the effects of seabed thickness,porosity,particle size and intrinsic permeability coefficient on regular wave and solitary wave-induced pore water pressure response.The results indicate that,as compared with regular wave-induced,solitary wave-induced pore water pressure has larger values and stronger action on seabed with different parameters.The results also clearly show the flow characteristics of pore water flow within seabed and water wave flow on seabed.The maximum pore water flow velocities within seabed under solitary wave action are higher than those under regular wave action.
基金Supported by the General Program of National Natural Science Foundation of China(No.50979066 and No.50979008)Ph.D.Programs Foundation of Ministry of Education of China(No.20094316110002)Scientific Research Fund of Department of Education, Hunan Province(No.10A006)
文摘This paper investigates the wave attenuation properties of the double trapezoidal submerged breakwaters on the flat-bed by conducting physical experiments subjected to linear and cnoidal incident waves.The method of Goda's two points is used to separate the heights of incident,reflected and transmitted waves based on the experimental data.The possible factors affecting the wave attenuation properties of the double trapezoidal submerged breakwaters(i.e.,the relative submerged water depth,relative breakwater spacing,wave steepness and relative wave height) are investigated with respect to the reflection and transmission coefficients.The results show that there is a range,within which the breakwater spacing has little impact on the reflection coefficient,and the transmission coefficient tends to be a constant.The influence of the wave steepness is reduced while the breakwater spacing is too large or too small.Within the range of the relative wave height tested in this study,the reflection and transmission coefficients increase and decrease with the relative wave height,respectively.The double trapezoidal submerged breakwaters model indicates a good attenuation effect for larger wave steepness,big relative wave height and within the range of the relative breakwater spacing between 12.5 and 14 according to linear and cnoidal waves.The changes of wave energy spectra between the double submerged breakwaters on the flat-bed are investigated by the fast Fourier transform(FFT) method,showing that wave energy dissipation can be reached more effectively when the relative breakwater spacing is 12.5.
基金supported by the National Natural Science Foundation of China(Nos.52192674,U1965206,U2240211)the Fundamental Research Funds for the Central Universities(No.DUT21TD106)。
文摘Owing to the stochastic behavior of earthquakes and complex crustal structure,wave type and incident direction are uncertain when seismic waves arrive at a structure.In addition,because of the different types of the structures and terrains,the traveling wave effects have different influences on the dynamic response of the structures.For the tall concrete-faced rockfill dam(CFRD),it is not only built in the complex terrain such as river valley,but also its height has reached 300 m level,which puts forward higher requirements for the seismic safety of the anti-seepage system mainly comprising concrete face slabs,especially the accurate location of the weak area in seism.Considering the limitations of the traditional uniform vibration analysis method,we implemented an efficient dynamic interaction analysis between a tall CFRD and its foundation using a non-uniform wave input method with a viscous-spring artificial boundary and equivalent nodal loads.This method was then applied to investigate the dynamic stress distribution on the concrete face slabs for different seismic wave types and incident directions.The results indicate that dam-foundation interactions behave differently at different wave incident angles,and that the traveling wave effect becomes more evident in valley topography.Seismic wave type and incident direction dramatically influenced stress in the face slab,and the extreme stress values and distribution law will vary under oblique wave incidence.The influence of the incident direction on slab stress was particularly apparent when SH-waves arrived from the left bank.Specifically,the extreme stress values in the face slab increased with an increasing incident angle.Interestingly,the locations of the extreme stress values changed mainly along the axis of the dam,and did not exhibit large changes in height.The seismic safety of CFRDs is therefore lower at higher incident angles from an anti-seepage perspective.Therefore,it is necessary to consider both the seismic wave type and incident direction during seismic capacity evaluations of tall CFRDs.