Phosphides possess large reversible capacity, small voltage hysteresis, and high energy efficiency, thus promising to be new anode candidates to replace commercial graphite for Li-ion batteries(LIBs).Through a facile ...Phosphides possess large reversible capacity, small voltage hysteresis, and high energy efficiency, thus promising to be new anode candidates to replace commercial graphite for Li-ion batteries(LIBs).Through a facile mechanochemistry method, we prepare a novel ternary phosphide of Ga0.5Al0.5P whose crystalline structure is determined to be a cation-disordered cubic zinc sulfide structure according to XRD refinement. As an anode for LIBs, the Ga0.5Al0.5P delivers a reversible capacity of 1,352 mA h g^(-1)at100 mA g^(-1)with an initial Coulombic efficiency(ICE) up to 90.0% based on a reversible Li-storage mechanism integrating intercalation and subsequent conversion processes as confirmed by various characterizations techniques including in-situ XRD, ex-situ Raman, and XPS and electrochemical characterizations.Graphite-modified Ga0.5Al0.5P exhibits a long-lasting cycling stability of retaining 1,182 mA h g^(-1)after300 cycles at 100 m A g^(-1), and 625 mA h g^(-1)after 800 cycles at 2,000 mA g^(-1), and a high-rate performance of remaining 342 m A h g^(-1)at 20,000 mA g^(-1). The outstanding electrochemical performances can be attributed to enhanced reaction kinetics enabled by the capacitive behaviors and the faster Liion diffusion enabled by the cation-mixing. Importantly, by tuning the cationic ratio, we develop a novel series of cation-mixed compounds of Ga_(1/3)Al_(2/3)P, Ga_(1/4)Al_(3/4)P, Ga_(1/5)Al_(4/5)P, Ga_(2/3)Al_(1/3)P, Ga_(3/4)Al_(1/4)P, and Ga_(4/5)Al_(1/5)P, which demonstrate large capacity, high ICE, and suitable anode potentials. Broadly, these compounds with disordered lattices probably present novel physicochemical properties, and high electrochemical performances, thus providing a new perspective for new materials design.展开更多
To investigate the effect of void defects on the shock response of hexanitrohexaazaisowurtzitane(CL-20)co-crystals,shock responses of CL-20 co-crystals with energetic materials ligands trinitrotoluene(TNT),1,3-dinitro...To investigate the effect of void defects on the shock response of hexanitrohexaazaisowurtzitane(CL-20)co-crystals,shock responses of CL-20 co-crystals with energetic materials ligands trinitrotoluene(TNT),1,3-dinitrobenzene(DNB),solvents ligands dimethyl carbonate(DMC) and gamma-butyrolactone(GBL)with void were simulated,using molecular dynamics method and reactive force field.It is found that the CL-20 co-crystals with void defects will form hot spots when impacted,significantly affecting the decomposition of molecules around the void.The degree of molecular fragmentation is relatively low under the reflection velocity of 2 km/s,and the main reactions are the formation of dimer and the shedding of nitro groups.The existence of voids reduces the safety of CL-20 co-crystals,which induced the sensitivity of energetic co-crystals CL-20/TNT and CL-20/DNB to increase more significantly.Detonation has occurred under the reflection velocity of 4 km/s,energetic co-crystals are easier to polymerize than solvent co-crystals,and are not obviously affected by voids.The results show that the energy of the wave decreases after sweeping over the void,which reduces the chemical reaction frequency downstream of the void and affects the detonation performance,especially the solvent co-crystals.展开更多
Due to their excellent photoelectron chemical properties and suitable energy level alignment with perovskite,perylene diimide(PDI)derivatives are competitive non-fullerene electron transport material(ETM)candidates fo...Due to their excellent photoelectron chemical properties and suitable energy level alignment with perovskite,perylene diimide(PDI)derivatives are competitive non-fullerene electron transport material(ETM)candidates for perovskite solar cells(PSCs).However,the conjugated rigid plane structure of PDI units result in PDI-based ETMs tending to form large aggregates,limiting their application and photovoltaic performance.In this study,to restrict aggregation and further enhance the photovoltaic performance of PDI-type ETMs,two PDI-based ETMs,termed PDO-PDI2(dimer)and PDO-PDI3(trimer),were constructed by introducing a phenothiazine 5,5-dioxide(PDO)core building block.The research manifests that the optoelectronic properties and film formation property of PDO-PDI2 and PDO-PDI3 were deeply affected by the molecular spatial configuration.Applied in PSCs,PDO-PDI3 with threedimensional spiral molecular structure,exhibits superior electron extraction and transport properties,further achieving the best PCE of 18.72%and maintaining 93%of its initial efficiency after a 720-h aging test under ambient conditions.展开更多
The rational construction of microstructure and composition with enhanced Maxwell-Wagner-Sillars effect(MWSE)is still a challenging direction for reinforcing electromagnetic wave(EMW)absorption performance,and the rel...The rational construction of microstructure and composition with enhanced Maxwell-Wagner-Sillars effect(MWSE)is still a challenging direction for reinforcing electromagnetic wave(EMW)absorption performance,and the related EMW attenuation mechanism has rarely been elucidated.Herein,MWSE boostedβ-chitin/carbon nano-onions/Ni–P composites is prepared according to the heterointerface engineering strategy via facile layer-by-layer electrostatic assembly and electroless plating techniques.The heterogeneous interface is reinforced from the aspect of porous skeleton,nanomaterials and multilayer construction.The composites exhibit competitive EMW response mechanism between the conductive loss and the polarization/magnetic loss,as describing like the story of“The Hare and the Tortoise”.As a result,the composites not only achieve a minimum reflection loss(RL_(min))of−50.83 dB and an effective bandwidth of 6.8 GHz,but also present remarkable EMW interference shielding effectiveness of 66.66 dB.In addition,diverse functions such as good thermal insulation,infrared shielding and photothermal performance were also achieved in the hybrid composites as a result of intrinsic morphology and chemicophysics properties.Therefore,we believe that the boosted MWSE open up a novel orientation toward developing multifunctional composites with high-efficient EMW response and thermal management.展开更多
Metal-organic frameworks(MOFs)are of quite a significance in the field of inorganic-organic hybrid crystals.Especially,MOFs have attracted increasing attention in recent years due to their large specific surface area,...Metal-organic frameworks(MOFs)are of quite a significance in the field of inorganic-organic hybrid crystals.Especially,MOFs have attracted increasing attention in recent years due to their large specific surface area,desirable electrical conductivity,controllable porosity,tunable geometric structure,and excellent thermal/chemical stability.Some recent studies have shown that carbon materials prepared by MOFs as precursors can retain the privileged structure of MOFs,such as large specific surface area and porous structure and,in contrast,realize in situ doping with heteroatoms(eg,N,S,P,and B).Moreover,by selecting appropriate MOF precursors,the composition and morphology of the carbon products can be easily adjusted.These remarkable structural advantages enable the great potential of MOF-derived carbon as high-performance energy materials,which to date have been applied in the fields of energy storage and conversion systems.In this review,we summarize the latest advances in MOF-derived carbon materials for energy storage applications.We first introduce the compositions,structures,and synthesis methods of MOF-derived carbon materials,and then discuss their applications and potentials in energy storage systems,including rechargeable lithium/sodium-ion batteries,lithium-sulfur batteries,supercapacitors,and so forth,in detail.Finally,we put forward our own perspectives on the future development of MOF-derived carbon materials.展开更多
Bi_(2)Te_(3) based alloys have been the most widely used thermoelectric material at low temperature for many decades.Here we report Se doped n-type Mg_(3)Bi_(2) based materials with a thermoelectric figure-of-merit ZT...Bi_(2)Te_(3) based alloys have been the most widely used thermoelectric material at low temperature for many decades.Here we report Se doped n-type Mg_(3)Bi_(2) based materials with a thermoelectric figure-of-merit ZT of 0.82 at 300 K and a peak ZT of 1.24 at 498 K,which is comparable to the n-type Bi_(2)Te_(3) and Te doped Mg_(3)Bi_(1.4)Sb_(0.6).The improved thermoelectric performance is benefited from the high carrier concentration and mobility as well as the thermal conductivity reduction.The reduced resistivity increased the power factor at all measured temperatures,leading to a higher engineering ZT(ZTeng)and engineering power factor(PFeng)for n-type Mg_(3)Bi_(2).The n-type Mg_(3)Bi_(1.4)Sb_(0.6) materials are promising for thermoelectric power generation and cooling applications near room temperature.展开更多
LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM811)layered oxides have been regarded as promising alternative cathodes for the next generation of high-energy lithium ion batteries(LIBs)due to high discharge capacities and energy ...LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM811)layered oxides have been regarded as promising alternative cathodes for the next generation of high-energy lithium ion batteries(LIBs)due to high discharge capacities and energy densities at high operation voltage.However,the capacity fading under high operation voltage still restricts the practical application.Herein,the capacity degradation mechanism of NCM811 at atomic-scale is studied in detail under various cut-off voltages using aberration-corrected scanning transmission electron microscopy(STEM).It is observed that the crystal structure of NCM811 evolution from a layered structure to a rock-salt phase is directly accompanied by serious intergranular cracks under 4.9 V,which is distinguished from the generally accepted structure evolution of layered,disordered layered,defect rock salt and rock salt phases,also observed under 4.3 and 4.7 V.The electron energy loss spectroscopy analysis also confirms the reduction of Ni and Co from the surface to the bulk,not the previously reported only Li/Ni interlayer mixing.The degradation mechanism of NCM811 at a high cut-off voltage of4.9 V is attributed to the formation of intergranular cracks induced by defects,the direct formation of the rock salt phase,and the accompanied reduction of Ni^(2+)and Co^(2+)phases from the surface to the bulk.展开更多
Exploring novel versatile electrode materials with outstanding electrochemical performance is the key to the development of advanced energy conversion and storage devices.In this work,we aim to construct new-fangled o...Exploring novel versatile electrode materials with outstanding electrochemical performance is the key to the development of advanced energy conversion and storage devices.In this work,we aim to construct new-fangled one-dimensional(1D)quasi-layered patronite vanadium tetrasulfide(VS_(4))nanostructures by using different sulfur sources,namely thiourea,thioacetamide,and L-cysteine through an ethyleneaminetetraacetic-acid(EDTA)-mediated solvothermal process.The as-prepared VS4exhibits several unique morphologies such as urchin,fluffy nanoflower,and polyhedron with appropriate surface areas.Among the prepared nanostructures,the VS_(4)-1@NF nanostructure exhibited excellent electrochemical properties in 6 M KOH solution,and we explored its redox electrochemistry in detail.The asprepared VS_(4)-1@NF electrode exhibited battery-type redox characteristics with the highest capacity of280 C g^(-1)in a three-electrode assembly.Moreover,it offered a capacity of 123 F g^(-1)in a hybrid twoelectrode set-up at 1 A g^(-1)with the highest specific energy and specific power of 38.5 W h kg^(-1)and750 W kg^(-1),respectively.Furthermore,to ensure the practical applicability and real-world performance of the prepared hybrid AC@NF//VS_(4)-1@NF cell,we performed a cycling stability test with more than 5,000galvanostatic charge–discharge cycles at 2 A g^(-1),and the cell retained around 84.7%of its capacitance even after 5,000 cycles with a CE of 96.1%.展开更多
The doping of ZnO has attracted lots of attention because it is an important way to tune the properties of ZnO.Postdoping after growth is one of the efficient strategies.Here,we report a unique approach to successfull...The doping of ZnO has attracted lots of attention because it is an important way to tune the properties of ZnO.Postdoping after growth is one of the efficient strategies.Here,we report a unique approach to successfully dope the single crystalline ZnO with Ag by the laser-induced method,which can effectively further post-treat grown samples.Magnetron sputtering was used to coat the Ag film with a thickness of about 50 nm on the single crystalline ZnO.Neodymium-doped yttrium aluminum garnet(Nd:YAG)laser was chosen to irradiate the Ag-capped ZnO samples,followed by annealing at700℃for two hours to form ZnO:Ag.The three-dimensional(3D)information of the elemental distribution of Ag in ZnO was obtained through time-of-flight secondary ion mass spectrometry(TOF-SIMS).TOF-SIMS and core-level x-ray photoelectron spectroscopy(XPS)demonstrated that the Ag impurities could be effectively doped into single crystalline ZnO samples as deep as several hundred nanometers.Obvious broadening of core level XPS profiles of Ag from the surface to depths of hundred nms was observed,indicating the variance of chemical state changes in laser-induced Ag-doped ZnO.Interesting features of electronic mixing states were detected in the valence band XPS of ZnO:Ag,suggesting the strong coupling or interaction of Ag and ZnO in the sample rather than their simple mixture.The Ag-doped ZnO also showed a narrower bandgap and a decrease in thermal diffusion coefficient compared to the pure ZnO,which would be beneficial to thermoelectric performance.展开更多
Room temperature Na-ion batteries(SIBs) show great potential for use as renewable energy storage systems.However, the large-scale application of SIBs has been hindered by the lack of an ideal SIBs anode material. We s...Room temperature Na-ion batteries(SIBs) show great potential for use as renewable energy storage systems.However, the large-scale application of SIBs has been hindered by the lack of an ideal SIBs anode material. We synthesized MoS2 on carbonized graphene-chitosan(G-C) using the hydrothermal method. The strong interaction between the MoS2 and the G-C greatly improved the electron transport rate and maintained the structural stability of the electrode, which lead to both an excellent rate capability and long cycle stability. The G-C monolith was proven to enhance the electrical conductivity of the composites and served as a matrix for uniformly dispersing active MoS2 nanosheets(NSs), as well as being a buffer material to adapt to changes in volume during the cycle.Serving as an anode material for SIBs, the MoS2-G-C electrode showed good cycling stability(527.3mAh g-1 at100 m A g-1 after 200 cycles), excellent rate capability, and a long cycle life(439.1 m Ah g-1 at 1 A g-1 after 200 cycles).展开更多
Transition metal nitrides(TMN)have recently grabbed immensely appealing as ideal active materials in energy storage and catalysis fields on account of their remarkable electrical conductivity,excellent chemical stabil...Transition metal nitrides(TMN)have recently grabbed immensely appealing as ideal active materials in energy storage and catalysis fields on account of their remarkable electrical conductivity,excellent chemical stability,wide band gap and tunable morphology.Both pure TMN and TMN-based materials have been extensively studied concerned with their preparation approaches,nanostructures,and favored performance in various applications.However,the processes towards synthesis of TMN are numerous and complex.Choosing appropriate method to obtain target TMN with desired structure is crucial,which further affects its practical application performance.Herein,this review offers a timely and comprehensive summary of the synthetic ways to TMN and their application in energy related domains.The synthesis section is categorized into in-situ and ex-situ based on where the N element in TMN origins from.Then,overviews on the energy related applications including energy storage,electrocatalysis and photocatalysis are discussed.In the end,the problems to be solved and the development trend of the synthesis and application of transition metal nitrides are prospected.展开更多
The electrochemical performances of cathode play a key role in the marine sediment microbial fuel cells(MSMFCs)as a long lasting power source to drive instruments,especially when the dissolved oxygen concentration is ...The electrochemical performances of cathode play a key role in the marine sediment microbial fuel cells(MSMFCs)as a long lasting power source to drive instruments,especially when the dissolved oxygen concentration is very low in seawater.A CTS-Fe^(3+)modified cathode is prepared here by grafting chitosan(CTS)on a carbon fiber surface and then chelating Fe^(3+)through the coordination process.The electrochemical performance in seawater and the output power of the assembled MSMFCs are both studied.The results show that the exchange current densities of CTS and the CTS-Fe^(3+)group are 5.5 and 6.2 times higher than that of the blank group,respectively.The potential of the CTS-Fe^(3+)modified cathode increases by 138 mV.The output power of the fuel cell(613.0 mW m^(-2))assembled with CTS-Fe^(3+)is 54 times larger than that of the blank group(11.4 mW m^(-2))and the current output corresponding with the maximum power output also increases by 56 times.Due to the valence conversion between Fe^(3+)and Fe^(2+)on the modified cathode,the kinetic activity of the dissolved oxygen reduction is accelerated and the depolarization capability of the cathode is enhanced,resulting higher cell power.On the basis of this study,the new cathode materials will be encouraged to design with the complex of iron ion in natural seawater as the catalysis for oxygen reduction to improve the cell power in deep sea.展开更多
Focused exploration of earth-abundant and cost-efficient non-noble metal electrocatalysts with superior hydrogen evolution reaction(HER)performance is very important for large-scale and efficient electrolysis of water...Focused exploration of earth-abundant and cost-efficient non-noble metal electrocatalysts with superior hydrogen evolution reaction(HER)performance is very important for large-scale and efficient electrolysis of water.Herein,a sandwich composite structure(designed as MS-Mo2C@NCNS)ofβ-Mo2C hollow nanotubes(HNT)and N-doped carbon nanosheets(NCNS)is designed and prepared using a binary NaCl–KCl molten salt(MS)strategy for HER.The temperature-dominant Kirkendall formation mechanism is tentatively proposed for such a three-dimensional hierarchical framework.Due to its attractive structure and componential synergism,MS-Mo2C@NCNS exposes more effective active sites,confers robust structural stability,and shows significant electrocatalytic activity/stability in HER,with a current density of 10 mA cm-2 and an overpotential of only 98 mV in 1 M KOH.Density functional theory calculations point to the synergistic effect of Mo2C HNT and NCNS,leading to enhanced electronic transport and suitable adsorption free energies of H*(ΔGH*)on the surface of electroactive Mo2C.More significantly,the MS-assisted synthetic methodology here provides an enormous perspective for the commercial development of highly active non-noble metal electrocatalysts toward efficient hydrogen evolution.展开更多
The friction judder characteristics during clutch engagement have a significant influence on the NVH of a driveline.In this research,the judder characteristics of automobile clutch friction materials and experimental ...The friction judder characteristics during clutch engagement have a significant influence on the NVH of a driveline.In this research,the judder characteristics of automobile clutch friction materials and experimental verification are studied.First,considering the stick-slip phenomenon in the clutch engagement process,a detailed 9-degrees-of-freedom(DOF)model including the body,each cylinder of the engine,clutch and friction lining,torsional damper,transmission and other driveline parts is established,and the calculation formula of friction torque in the clutch engagement process is determined.Second,the influence of the friction gradient characteristics on the amplification or attenuation of the automobile friction judder is analyzed,and the corresponding stability analysis and the numerical simulation of different friction gradient values are carried out with MATLAB/Simulink software.Finally,judder bench test equipment and a corresponding damping test program are developed,and the relationship between the friction coefficient gradient characteristics and the system damping is analyzed.After a large number of tests,the evaluation basis of the test is determined.The research results show that the friction lining with negative gradient characteristics of the friction coefficient will have a judder signal.When the friction gradient value is less than-0.005 s/m,the judder signal of the measured clutch cannot be completely attenuated,and the judder phenomenon occurs.When the friction gradient is greater than-0.005 s/m,the judder signal can be significantly suppressed and the system connection tends to be stable.展开更多
Ni-rich layered oxides(LiNi_(0.9)Co_(0.05)Mn_(0.05)O_(2))show great potential in long-range and low-cost lithiumion batteries.However,due to the high surface sensitivity,their practical application is hindered by inte...Ni-rich layered oxides(LiNi_(0.9)Co_(0.05)Mn_(0.05)O_(2))show great potential in long-range and low-cost lithiumion batteries.However,due to the high surface sensitivity,their practical application is hindered by interfacial instability with electrolytes under high voltage for long cyclic life.Herein,by combining both firstprinciple calculations and time-of-flight secondary ion mass spectrometry(TOF-SIMS),a novel surface fluorinated reconstruction(SFR)mechanism is proposed to improve the interfacial stability under high voltage,which could effectively regulate the surface fluoride species to desensitize the LiNi_(0.9)Co_(0.05)Mn_(0.05)O_(2)interface.We demonstrate here that by tuning the ratio of fluoride species,the LiNi_(0.9)Co_(0.05)Mn_(0.05)O_(2)/Li battery could achieve excellent long-term and high voltage performance(163.5 mA h g^(-1)at 0.5 C for 300 cycles under 4.4 V),while the controlled sample decayed to 125.4 mA h g^(-1)after 300 cycles.Moreover,the favorable cross-talk effect induced by SFR further facilitates the incorporation of suitable amounts of Ni ions into the construction of stable solid electrolyte interface(SEI)layer for anode surface.Therefore,the ultra-long cycling stability under high voltage can be achieved by the robust cathode/electrolyte and Li/electrolyte interfaces,which results in excellent interfacial stability after long cycling.This work provides new insights into the surface design of cathode materials and improves the stability of the electrode-electrode interface under high voltage.展开更多
The(EDTA)^(4-)organic substituents were supplemented with alkaline silicates electrolyte,however in varying concentration to explore the microstructure,chemical composition and subsequent effects on the biodegradation...The(EDTA)^(4-)organic substituents were supplemented with alkaline silicates electrolyte,however in varying concentration to explore the microstructure,chemical composition and subsequent effects on the biodegradation of the PEO coated Mg AZ91 alloy.From surface analysis-,carried out through SEM,samples with zero-(EDTA)^(4-)were found-,lacking pancake structural features;however,supplementing electrolyte with(EDTA)^(4-),bulky and layered pancakes were obtained with minimum cracks and minimum porosity for EDT-1.From the phase and inner layer analysis,it was found that EDTA can significantly alter the surface layers composition and could act as a passivation agent-;however,individual polycrystalline phases were not found to form.The hardness value obtained for EDT-1 was~909.69 HV,the highest value found here which occurs with the shallowest indents found in this study.In-vitro degradation analysis was carried out using potentiodynamic polarization at room temperature,cyclic polarization at RT and high fever conditions(HFT~40°C).The corrosion potential for coated AZ91 was obtained as a positive value of~0.1 V,for the first time in the PEO research;however,the results were not supported by the cyclic polarization tests at room temperature and at HFT.The post corrosion microstructural analysis confirmed the effective role of EDTA up to 1.0 g·L^(-1)and revealed the formation of thin films during the forward polarization at HFT.展开更多
AZ31 Mg alloy with heterogeneous bimodal grain structure(smaller grain size of 5-20µm and coarser grain size of 100-200µm)was subjected to accumulated extrusion bonding(AEB)at 250℃combined with two-stage ar...AZ31 Mg alloy with heterogeneous bimodal grain structure(smaller grain size of 5-20µm and coarser grain size of 100-200µm)was subjected to accumulated extrusion bonding(AEB)at 250℃combined with two-stage artificial cooling in this work,viz.local water cooling and artificial cooling.The microstructure developed consecutively as a result of discontinuous dynamic recrystallization(DDRX)for the AEBed samples.{10-12}tensile twinning also played an important role for the AEB with local water cooling at the initial extrusion stage in the container.Local water cooling could further reduce the DRXed grain size to~2.1µm comparing that without water cooling.And the grain growth rate was reduced by artificial cooling out of extrusion die.Under the combination of two-stage cooling,the fine DRXed grains at sizing band were almost retained with average grain size of~2.3µm after the sheet out of extrusion die,and the unDRXed grains with high residual dislocation density accumulation were also reserved.The tensile tests results indicated that a good strength-ductility balance with a high ultimate tensile strength(319 MPa vs.412 MPa)and fracture elongation(19.9%vs.30.3%)were obtained.The strength enhancement was mainly owing to the grain refinement and local residual plastic strain reserved by the artificial cooling.The excellent ductility originated from fine DRXed microstructure and ED-tilt double peak texture.展开更多
In the past decade,the economy of China has been increasing at a remarkable speed,which causes the rapid increase of automobile industry.Researches in past years demonstrated that the incorporation of crumb rubber int...In the past decade,the economy of China has been increasing at a remarkable speed,which causes the rapid increase of automobile industry.Researches in past years demonstrated that the incorporation of crumb rubber into concrete reduces the mechanical strength of concrete.However,properties such as plastic shrinkage cracking resistance,dry shrinkage cracking resistance,frost resistance,impact resistance,fatigue resistance etc.are improved due to the deformable feature of crumb rubber.Therefore,it is expected that using crumb rubber in concrete not only improves the properties of the material,but also reduces the environmental pressure of handling waste tires.展开更多
With the large-scale service of lithium-ion batteries(LIBs),their failures have attracted significant attentions.While the decay of active materials is the primary cause for LIB failures,the degradation of auxiliary m...With the large-scale service of lithium-ion batteries(LIBs),their failures have attracted significant attentions.While the decay of active materials is the primary cause for LIB failures,the degradation of auxiliary materials,such as current collector corrosion,should not be disregarded.Therefore,it is necessary to conduct a comprehensive review in this field.In this review,from the perspectives of electrochemistry and materials,we systematically summarize the corrosion behavior of aluminum cathode current collector and propose corresponding countermeasures.Firstly,the corrosion type is clarified based on the properties of passivation layers in different organic electrolyte components.Furthermore,a thoroughgoing analysis is presented to examine the impact of various factors on aluminum corrosion,including lithium salts,organic solvents,water impurities,and operating conditions.Subsequently,strategies for electrolyte and protection layer employed to suppress corrosion are discussed in detail.Lastly and most importantly,we provide insights and recommendations to prevent corrosion of current collectors,facilitate the development of advanced current collectors and the implementation of next-generation high-voltage stable LIBs.展开更多
基金supported by the National Natural Science Foundation of China (22178068)the Brain Pool program (2021H1D3A2A02045576) funded by National Research Foundation of Korea (NRF)。
文摘Phosphides possess large reversible capacity, small voltage hysteresis, and high energy efficiency, thus promising to be new anode candidates to replace commercial graphite for Li-ion batteries(LIBs).Through a facile mechanochemistry method, we prepare a novel ternary phosphide of Ga0.5Al0.5P whose crystalline structure is determined to be a cation-disordered cubic zinc sulfide structure according to XRD refinement. As an anode for LIBs, the Ga0.5Al0.5P delivers a reversible capacity of 1,352 mA h g^(-1)at100 mA g^(-1)with an initial Coulombic efficiency(ICE) up to 90.0% based on a reversible Li-storage mechanism integrating intercalation and subsequent conversion processes as confirmed by various characterizations techniques including in-situ XRD, ex-situ Raman, and XPS and electrochemical characterizations.Graphite-modified Ga0.5Al0.5P exhibits a long-lasting cycling stability of retaining 1,182 mA h g^(-1)after300 cycles at 100 m A g^(-1), and 625 mA h g^(-1)after 800 cycles at 2,000 mA g^(-1), and a high-rate performance of remaining 342 m A h g^(-1)at 20,000 mA g^(-1). The outstanding electrochemical performances can be attributed to enhanced reaction kinetics enabled by the capacitive behaviors and the faster Liion diffusion enabled by the cation-mixing. Importantly, by tuning the cationic ratio, we develop a novel series of cation-mixed compounds of Ga_(1/3)Al_(2/3)P, Ga_(1/4)Al_(3/4)P, Ga_(1/5)Al_(4/5)P, Ga_(2/3)Al_(1/3)P, Ga_(3/4)Al_(1/4)P, and Ga_(4/5)Al_(1/5)P, which demonstrate large capacity, high ICE, and suitable anode potentials. Broadly, these compounds with disordered lattices probably present novel physicochemical properties, and high electrochemical performances, thus providing a new perspective for new materials design.
基金supported by the National Natural Science Foundation of China (22275018)the Project of State Key Laboratory of Explosion Science and Technology (Beijing Institute of Technology)(Grant No.QNKT20-04)。
文摘To investigate the effect of void defects on the shock response of hexanitrohexaazaisowurtzitane(CL-20)co-crystals,shock responses of CL-20 co-crystals with energetic materials ligands trinitrotoluene(TNT),1,3-dinitrobenzene(DNB),solvents ligands dimethyl carbonate(DMC) and gamma-butyrolactone(GBL)with void were simulated,using molecular dynamics method and reactive force field.It is found that the CL-20 co-crystals with void defects will form hot spots when impacted,significantly affecting the decomposition of molecules around the void.The degree of molecular fragmentation is relatively low under the reflection velocity of 2 km/s,and the main reactions are the formation of dimer and the shedding of nitro groups.The existence of voids reduces the safety of CL-20 co-crystals,which induced the sensitivity of energetic co-crystals CL-20/TNT and CL-20/DNB to increase more significantly.Detonation has occurred under the reflection velocity of 4 km/s,energetic co-crystals are easier to polymerize than solvent co-crystals,and are not obviously affected by voids.The results show that the energy of the wave decreases after sweeping over the void,which reduces the chemical reaction frequency downstream of the void and affects the detonation performance,especially the solvent co-crystals.
基金financially supported by the National Natural Science Foundation of China(Grants 21805114,21905119)Key Research and Development program of Jiangsu Province(BE2019009-2)+4 种基金Natural Science Foundation of Jiangsu province(BK20180869,BK20180867)China Postdoctoral Science Foundation(2019M651741),Top talents in Jiangsu province(XNY066)the Jiangsu University Foundation(17JDG032,17JDG031)Hightech Research Key laboratory of Zhenjiang(SS2018002)the State Key Laboratory of Fine Chemicals(KF1902)。
文摘Due to their excellent photoelectron chemical properties and suitable energy level alignment with perovskite,perylene diimide(PDI)derivatives are competitive non-fullerene electron transport material(ETM)candidates for perovskite solar cells(PSCs).However,the conjugated rigid plane structure of PDI units result in PDI-based ETMs tending to form large aggregates,limiting their application and photovoltaic performance.In this study,to restrict aggregation and further enhance the photovoltaic performance of PDI-type ETMs,two PDI-based ETMs,termed PDO-PDI2(dimer)and PDO-PDI3(trimer),were constructed by introducing a phenothiazine 5,5-dioxide(PDO)core building block.The research manifests that the optoelectronic properties and film formation property of PDO-PDI2 and PDO-PDI3 were deeply affected by the molecular spatial configuration.Applied in PSCs,PDO-PDI3 with threedimensional spiral molecular structure,exhibits superior electron extraction and transport properties,further achieving the best PCE of 18.72%and maintaining 93%of its initial efficiency after a 720-h aging test under ambient conditions.
基金This work was supported by the National Key Research and Development Program of China(Grant No.2019YFE0122900)the National Natural Science Foundation of China(No 51971162,U1933112,51671146)+1 种基金China Postdoctoral Science Foundation(Grant No.2020M671208)Open access funding provided by Shanghai Jiao Tong University
文摘The rational construction of microstructure and composition with enhanced Maxwell-Wagner-Sillars effect(MWSE)is still a challenging direction for reinforcing electromagnetic wave(EMW)absorption performance,and the related EMW attenuation mechanism has rarely been elucidated.Herein,MWSE boostedβ-chitin/carbon nano-onions/Ni–P composites is prepared according to the heterointerface engineering strategy via facile layer-by-layer electrostatic assembly and electroless plating techniques.The heterogeneous interface is reinforced from the aspect of porous skeleton,nanomaterials and multilayer construction.The composites exhibit competitive EMW response mechanism between the conductive loss and the polarization/magnetic loss,as describing like the story of“The Hare and the Tortoise”.As a result,the composites not only achieve a minimum reflection loss(RL_(min))of−50.83 dB and an effective bandwidth of 6.8 GHz,but also present remarkable EMW interference shielding effectiveness of 66.66 dB.In addition,diverse functions such as good thermal insulation,infrared shielding and photothermal performance were also achieved in the hybrid composites as a result of intrinsic morphology and chemicophysics properties.Therefore,we believe that the boosted MWSE open up a novel orientation toward developing multifunctional composites with high-efficient EMW response and thermal management.
基金This study acknowledges the supports by the Shenzhen Science and Technology Innovation Commission under Grant JCYJ20180507181806316the City University of Hong Kong under project Fundamental Investigation of Phase Transformative Materials for Energy Application(Project No.9610399)the Shenzhen Research Institute,City University of Hong Kong.
文摘Metal-organic frameworks(MOFs)are of quite a significance in the field of inorganic-organic hybrid crystals.Especially,MOFs have attracted increasing attention in recent years due to their large specific surface area,desirable electrical conductivity,controllable porosity,tunable geometric structure,and excellent thermal/chemical stability.Some recent studies have shown that carbon materials prepared by MOFs as precursors can retain the privileged structure of MOFs,such as large specific surface area and porous structure and,in contrast,realize in situ doping with heteroatoms(eg,N,S,P,and B).Moreover,by selecting appropriate MOF precursors,the composition and morphology of the carbon products can be easily adjusted.These remarkable structural advantages enable the great potential of MOF-derived carbon as high-performance energy materials,which to date have been applied in the fields of energy storage and conversion systems.In this review,we summarize the latest advances in MOF-derived carbon materials for energy storage applications.We first introduce the compositions,structures,and synthesis methods of MOF-derived carbon materials,and then discuss their applications and potentials in energy storage systems,including rechargeable lithium/sodium-ion batteries,lithium-sulfur batteries,supercapacitors,and so forth,in detail.Finally,we put forward our own perspectives on the future development of MOF-derived carbon materials.
基金supported by Young Scientist Fund of National Natural Science Foundation of China(No.51601152)Chunhui Program from Education Ministry of China,Open Research Subject of Key Laboratory of Fluid and Power Machinery of Ministry of Education(No.SZJJ2017-082)the Sichuan Science and Technology Program(No.2019JDTD0024).
文摘Bi_(2)Te_(3) based alloys have been the most widely used thermoelectric material at low temperature for many decades.Here we report Se doped n-type Mg_(3)Bi_(2) based materials with a thermoelectric figure-of-merit ZT of 0.82 at 300 K and a peak ZT of 1.24 at 498 K,which is comparable to the n-type Bi_(2)Te_(3) and Te doped Mg_(3)Bi_(1.4)Sb_(0.6).The improved thermoelectric performance is benefited from the high carrier concentration and mobility as well as the thermal conductivity reduction.The reduced resistivity increased the power factor at all measured temperatures,leading to a higher engineering ZT(ZTeng)and engineering power factor(PFeng)for n-type Mg_(3)Bi_(2).The n-type Mg_(3)Bi_(1.4)Sb_(0.6) materials are promising for thermoelectric power generation and cooling applications near room temperature.
基金supported by the National Natural Science Foundation of China(U2032131)the Key R&D Program of Shaanxi Province(2021GY-118)the Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering(2022SX-TD012 and 2021SXTD012)。
文摘LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM811)layered oxides have been regarded as promising alternative cathodes for the next generation of high-energy lithium ion batteries(LIBs)due to high discharge capacities and energy densities at high operation voltage.However,the capacity fading under high operation voltage still restricts the practical application.Herein,the capacity degradation mechanism of NCM811 at atomic-scale is studied in detail under various cut-off voltages using aberration-corrected scanning transmission electron microscopy(STEM).It is observed that the crystal structure of NCM811 evolution from a layered structure to a rock-salt phase is directly accompanied by serious intergranular cracks under 4.9 V,which is distinguished from the generally accepted structure evolution of layered,disordered layered,defect rock salt and rock salt phases,also observed under 4.3 and 4.7 V.The electron energy loss spectroscopy analysis also confirms the reduction of Ni and Co from the surface to the bulk,not the previously reported only Li/Ni interlayer mixing.The degradation mechanism of NCM811 at a high cut-off voltage of4.9 V is attributed to the formation of intergranular cracks induced by defects,the direct formation of the rock salt phase,and the accompanied reduction of Ni^(2+)and Co^(2+)phases from the surface to the bulk.
基金supported by the Research Program of Dongguk University in 2022(No.S-2022-G0001-00016)。
文摘Exploring novel versatile electrode materials with outstanding electrochemical performance is the key to the development of advanced energy conversion and storage devices.In this work,we aim to construct new-fangled one-dimensional(1D)quasi-layered patronite vanadium tetrasulfide(VS_(4))nanostructures by using different sulfur sources,namely thiourea,thioacetamide,and L-cysteine through an ethyleneaminetetraacetic-acid(EDTA)-mediated solvothermal process.The as-prepared VS4exhibits several unique morphologies such as urchin,fluffy nanoflower,and polyhedron with appropriate surface areas.Among the prepared nanostructures,the VS_(4)-1@NF nanostructure exhibited excellent electrochemical properties in 6 M KOH solution,and we explored its redox electrochemistry in detail.The asprepared VS_(4)-1@NF electrode exhibited battery-type redox characteristics with the highest capacity of280 C g^(-1)in a three-electrode assembly.Moreover,it offered a capacity of 123 F g^(-1)in a hybrid twoelectrode set-up at 1 A g^(-1)with the highest specific energy and specific power of 38.5 W h kg^(-1)and750 W kg^(-1),respectively.Furthermore,to ensure the practical applicability and real-world performance of the prepared hybrid AC@NF//VS_(4)-1@NF cell,we performed a cycling stability test with more than 5,000galvanostatic charge–discharge cycles at 2 A g^(-1),and the cell retained around 84.7%of its capacitance even after 5,000 cycles with a CE of 96.1%.
基金Project supported by the National Key Research and Development Program of China(Grant No.2022YFB3605403)。
文摘The doping of ZnO has attracted lots of attention because it is an important way to tune the properties of ZnO.Postdoping after growth is one of the efficient strategies.Here,we report a unique approach to successfully dope the single crystalline ZnO with Ag by the laser-induced method,which can effectively further post-treat grown samples.Magnetron sputtering was used to coat the Ag film with a thickness of about 50 nm on the single crystalline ZnO.Neodymium-doped yttrium aluminum garnet(Nd:YAG)laser was chosen to irradiate the Ag-capped ZnO samples,followed by annealing at700℃for two hours to form ZnO:Ag.The three-dimensional(3D)information of the elemental distribution of Ag in ZnO was obtained through time-of-flight secondary ion mass spectrometry(TOF-SIMS).TOF-SIMS and core-level x-ray photoelectron spectroscopy(XPS)demonstrated that the Ag impurities could be effectively doped into single crystalline ZnO samples as deep as several hundred nanometers.Obvious broadening of core level XPS profiles of Ag from the surface to depths of hundred nms was observed,indicating the variance of chemical state changes in laser-induced Ag-doped ZnO.Interesting features of electronic mixing states were detected in the valence band XPS of ZnO:Ag,suggesting the strong coupling or interaction of Ag and ZnO in the sample rather than their simple mixture.The Ag-doped ZnO also showed a narrower bandgap and a decrease in thermal diffusion coefficient compared to the pure ZnO,which would be beneficial to thermoelectric performance.
基金financially supported by the Singapore National Research Foundation under NRF RF Award No. MOE2016-T2-1-131, Tier 1 2017-T1-001-075, MOE2018-T3-1-002
文摘Room temperature Na-ion batteries(SIBs) show great potential for use as renewable energy storage systems.However, the large-scale application of SIBs has been hindered by the lack of an ideal SIBs anode material. We synthesized MoS2 on carbonized graphene-chitosan(G-C) using the hydrothermal method. The strong interaction between the MoS2 and the G-C greatly improved the electron transport rate and maintained the structural stability of the electrode, which lead to both an excellent rate capability and long cycle stability. The G-C monolith was proven to enhance the electrical conductivity of the composites and served as a matrix for uniformly dispersing active MoS2 nanosheets(NSs), as well as being a buffer material to adapt to changes in volume during the cycle.Serving as an anode material for SIBs, the MoS2-G-C electrode showed good cycling stability(527.3mAh g-1 at100 m A g-1 after 200 cycles), excellent rate capability, and a long cycle life(439.1 m Ah g-1 at 1 A g-1 after 200 cycles).
基金support offered by National Natural Science Foundation of China(NSFC,Grant No.21403091)。
文摘Transition metal nitrides(TMN)have recently grabbed immensely appealing as ideal active materials in energy storage and catalysis fields on account of their remarkable electrical conductivity,excellent chemical stability,wide band gap and tunable morphology.Both pure TMN and TMN-based materials have been extensively studied concerned with their preparation approaches,nanostructures,and favored performance in various applications.However,the processes towards synthesis of TMN are numerous and complex.Choosing appropriate method to obtain target TMN with desired structure is crucial,which further affects its practical application performance.Herein,this review offers a timely and comprehensive summary of the synthetic ways to TMN and their application in energy related domains.The synthesis section is categorized into in-situ and ex-situ based on where the N element in TMN origins from.Then,overviews on the energy related applications including energy storage,electrocatalysis and photocatalysis are discussed.In the end,the problems to be solved and the development trend of the synthesis and application of transition metal nitrides are prospected.
基金supported by the National Natural Science Foundation of China(No.22075262)。
文摘The electrochemical performances of cathode play a key role in the marine sediment microbial fuel cells(MSMFCs)as a long lasting power source to drive instruments,especially when the dissolved oxygen concentration is very low in seawater.A CTS-Fe^(3+)modified cathode is prepared here by grafting chitosan(CTS)on a carbon fiber surface and then chelating Fe^(3+)through the coordination process.The electrochemical performance in seawater and the output power of the assembled MSMFCs are both studied.The results show that the exchange current densities of CTS and the CTS-Fe^(3+)group are 5.5 and 6.2 times higher than that of the blank group,respectively.The potential of the CTS-Fe^(3+)modified cathode increases by 138 mV.The output power of the fuel cell(613.0 mW m^(-2))assembled with CTS-Fe^(3+)is 54 times larger than that of the blank group(11.4 mW m^(-2))and the current output corresponding with the maximum power output also increases by 56 times.Due to the valence conversion between Fe^(3+)and Fe^(2+)on the modified cathode,the kinetic activity of the dissolved oxygen reduction is accelerated and the depolarization capability of the cathode is enhanced,resulting higher cell power.On the basis of this study,the new cathode materials will be encouraged to design with the complex of iron ion in natural seawater as the catalysis for oxygen reduction to improve the cell power in deep sea.
基金the National Natural Science Foundation of China(Nos.52072151,52171211,52102253,52271218,U22A20145)the Jinan Independent Innovative Team(2020GXRC015)+1 种基金the Major Program of Shandong Province Natural Science Foundation(ZR2021ZD05)the Science and Technology Program of University of Jinan(XKY2119).
文摘Focused exploration of earth-abundant and cost-efficient non-noble metal electrocatalysts with superior hydrogen evolution reaction(HER)performance is very important for large-scale and efficient electrolysis of water.Herein,a sandwich composite structure(designed as MS-Mo2C@NCNS)ofβ-Mo2C hollow nanotubes(HNT)and N-doped carbon nanosheets(NCNS)is designed and prepared using a binary NaCl–KCl molten salt(MS)strategy for HER.The temperature-dominant Kirkendall formation mechanism is tentatively proposed for such a three-dimensional hierarchical framework.Due to its attractive structure and componential synergism,MS-Mo2C@NCNS exposes more effective active sites,confers robust structural stability,and shows significant electrocatalytic activity/stability in HER,with a current density of 10 mA cm-2 and an overpotential of only 98 mV in 1 M KOH.Density functional theory calculations point to the synergistic effect of Mo2C HNT and NCNS,leading to enhanced electronic transport and suitable adsorption free energies of H*(ΔGH*)on the surface of electroactive Mo2C.More significantly,the MS-assisted synthetic methodology here provides an enormous perspective for the commercial development of highly active non-noble metal electrocatalysts toward efficient hydrogen evolution.
基金Supported by National Natural Science Foundation of China (Grant No.51775249)。
文摘The friction judder characteristics during clutch engagement have a significant influence on the NVH of a driveline.In this research,the judder characteristics of automobile clutch friction materials and experimental verification are studied.First,considering the stick-slip phenomenon in the clutch engagement process,a detailed 9-degrees-of-freedom(DOF)model including the body,each cylinder of the engine,clutch and friction lining,torsional damper,transmission and other driveline parts is established,and the calculation formula of friction torque in the clutch engagement process is determined.Second,the influence of the friction gradient characteristics on the amplification or attenuation of the automobile friction judder is analyzed,and the corresponding stability analysis and the numerical simulation of different friction gradient values are carried out with MATLAB/Simulink software.Finally,judder bench test equipment and a corresponding damping test program are developed,and the relationship between the friction coefficient gradient characteristics and the system damping is analyzed.After a large number of tests,the evaluation basis of the test is determined.The research results show that the friction lining with negative gradient characteristics of the friction coefficient will have a judder signal.When the friction gradient value is less than-0.005 s/m,the judder signal of the measured clutch cannot be completely attenuated,and the judder phenomenon occurs.When the friction gradient is greater than-0.005 s/m,the judder signal can be significantly suppressed and the system connection tends to be stable.
基金supported by the National Natural Science Foundation of China(22209012,52072036)the fellowship of China Postdoctoral Science Foundation(2020M680374)。
文摘Ni-rich layered oxides(LiNi_(0.9)Co_(0.05)Mn_(0.05)O_(2))show great potential in long-range and low-cost lithiumion batteries.However,due to the high surface sensitivity,their practical application is hindered by interfacial instability with electrolytes under high voltage for long cyclic life.Herein,by combining both firstprinciple calculations and time-of-flight secondary ion mass spectrometry(TOF-SIMS),a novel surface fluorinated reconstruction(SFR)mechanism is proposed to improve the interfacial stability under high voltage,which could effectively regulate the surface fluoride species to desensitize the LiNi_(0.9)Co_(0.05)Mn_(0.05)O_(2)interface.We demonstrate here that by tuning the ratio of fluoride species,the LiNi_(0.9)Co_(0.05)Mn_(0.05)O_(2)/Li battery could achieve excellent long-term and high voltage performance(163.5 mA h g^(-1)at 0.5 C for 300 cycles under 4.4 V),while the controlled sample decayed to 125.4 mA h g^(-1)after 300 cycles.Moreover,the favorable cross-talk effect induced by SFR further facilitates the incorporation of suitable amounts of Ni ions into the construction of stable solid electrolyte interface(SEI)layer for anode surface.Therefore,the ultra-long cycling stability under high voltage can be achieved by the robust cathode/electrolyte and Li/electrolyte interfaces,which results in excellent interfacial stability after long cycling.This work provides new insights into the surface design of cathode materials and improves the stability of the electrode-electrode interface under high voltage.
基金supported by Basic Science Research Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Education(2021R1I1A1A0105510212)
文摘The(EDTA)^(4-)organic substituents were supplemented with alkaline silicates electrolyte,however in varying concentration to explore the microstructure,chemical composition and subsequent effects on the biodegradation of the PEO coated Mg AZ91 alloy.From surface analysis-,carried out through SEM,samples with zero-(EDTA)^(4-)were found-,lacking pancake structural features;however,supplementing electrolyte with(EDTA)^(4-),bulky and layered pancakes were obtained with minimum cracks and minimum porosity for EDT-1.From the phase and inner layer analysis,it was found that EDTA can significantly alter the surface layers composition and could act as a passivation agent-;however,individual polycrystalline phases were not found to form.The hardness value obtained for EDT-1 was~909.69 HV,the highest value found here which occurs with the shallowest indents found in this study.In-vitro degradation analysis was carried out using potentiodynamic polarization at room temperature,cyclic polarization at RT and high fever conditions(HFT~40°C).The corrosion potential for coated AZ91 was obtained as a positive value of~0.1 V,for the first time in the PEO research;however,the results were not supported by the cyclic polarization tests at room temperature and at HFT.The post corrosion microstructural analysis confirmed the effective role of EDTA up to 1.0 g·L^(-1)and revealed the formation of thin films during the forward polarization at HFT.
基金The authors are grateful for the National Natural Science Foundation of China(No.51905366 and U1810122)Yantai high-end talent introduction"Double Hundred Plan"(2021)Key Research and Development Program of Shanxi Province(201903D421076).
文摘AZ31 Mg alloy with heterogeneous bimodal grain structure(smaller grain size of 5-20µm and coarser grain size of 100-200µm)was subjected to accumulated extrusion bonding(AEB)at 250℃combined with two-stage artificial cooling in this work,viz.local water cooling and artificial cooling.The microstructure developed consecutively as a result of discontinuous dynamic recrystallization(DDRX)for the AEBed samples.{10-12}tensile twinning also played an important role for the AEB with local water cooling at the initial extrusion stage in the container.Local water cooling could further reduce the DRXed grain size to~2.1µm comparing that without water cooling.And the grain growth rate was reduced by artificial cooling out of extrusion die.Under the combination of two-stage cooling,the fine DRXed grains at sizing band were almost retained with average grain size of~2.3µm after the sheet out of extrusion die,and the unDRXed grains with high residual dislocation density accumulation were also reserved.The tensile tests results indicated that a good strength-ductility balance with a high ultimate tensile strength(319 MPa vs.412 MPa)and fracture elongation(19.9%vs.30.3%)were obtained.The strength enhancement was mainly owing to the grain refinement and local residual plastic strain reserved by the artificial cooling.The excellent ductility originated from fine DRXed microstructure and ED-tilt double peak texture.
文摘In the past decade,the economy of China has been increasing at a remarkable speed,which causes the rapid increase of automobile industry.Researches in past years demonstrated that the incorporation of crumb rubber into concrete reduces the mechanical strength of concrete.However,properties such as plastic shrinkage cracking resistance,dry shrinkage cracking resistance,frost resistance,impact resistance,fatigue resistance etc.are improved due to the deformable feature of crumb rubber.Therefore,it is expected that using crumb rubber in concrete not only improves the properties of the material,but also reduces the environmental pressure of handling waste tires.
文摘With the large-scale service of lithium-ion batteries(LIBs),their failures have attracted significant attentions.While the decay of active materials is the primary cause for LIB failures,the degradation of auxiliary materials,such as current collector corrosion,should not be disregarded.Therefore,it is necessary to conduct a comprehensive review in this field.In this review,from the perspectives of electrochemistry and materials,we systematically summarize the corrosion behavior of aluminum cathode current collector and propose corresponding countermeasures.Firstly,the corrosion type is clarified based on the properties of passivation layers in different organic electrolyte components.Furthermore,a thoroughgoing analysis is presented to examine the impact of various factors on aluminum corrosion,including lithium salts,organic solvents,water impurities,and operating conditions.Subsequently,strategies for electrolyte and protection layer employed to suppress corrosion are discussed in detail.Lastly and most importantly,we provide insights and recommendations to prevent corrosion of current collectors,facilitate the development of advanced current collectors and the implementation of next-generation high-voltage stable LIBs.
基金Projects(52161009,51961003)supported by the National Natural Science Foundation of ChinaProject(2022AAC03224)supported by the Natural Science Foundation of Ningxia,ChinaProject(XAB2022YW07)supported by the West Light Foundation of the Chinese Academy of Science。