Suspended emulsion polymerization of vinyl chloride was carried out in a 5 L autoclave. The influence of agitation, polymerization conversion, dispersant and surfactant on the average particle size (PS) and particle s...Suspended emulsion polymerization of vinyl chloride was carried out in a 5 L autoclave. The influence of agitation, polymerization conversion, dispersant and surfactant on the average particle size (PS) and particle size distribution (PSD), particle morphology and porosity of polyvinyl chloride (PVC) resin was investigated. It showed that the agitator had great influence on the smooth operation of polymerization, PS and PSD. The PS increased and PSD became narrow as polymerization conversion became high. The porosity decreased with the increase of conversion. A convenient choice of additives, both dispersants and non-ionic surfactants, allows one to adjust PS and PSD. The PS decreased with the addition of polyvinyl alcohol or hydroxypropyl methylcellulose dispersants,and increased with the addition of Span surfactants. The addition of dispersants or surfactants also affected the morphology and porosity of resin, and PVC resin with looser agglomeration and homogeneous distribution of primary particles was prepared.展开更多
Macroporous acrylonitrile-acrylic acid （AN-AA） copolymer hydrogels were synthesized by flee-radical solution polymerizations, using ammonium persulfate （APS）/N,N,N＇,N＇-tetramethylethylenediamine （TEMED） redox ...Macroporous acrylonitrile-acrylic acid （AN-AA） copolymer hydrogels were synthesized by flee-radical solution polymerizations, using ammonium persulfate （APS）/N,N,N＇,N＇-tetramethylethylenediamine （TEMED） redox initiator system and alcohols porogens. The morphology, temperature and pH sensitive swelling behavior, and swelling kinetics of the resulting hydrogels were investigated. It was found that alcohol type and concentration had great influences on the pore structure and porosity of hydrogels. The pore size of hydrogel increases with the moderate increase of the length of alcohol alkyl chain. However, a further increase of alkyl length would result in the formation of cauliflower-like structure and the decrease of pore size. The porosity of hydrogels increases with the increase of porogen concentration in the polymerization medium. The hydrogels with macroporous structure swell or shrink much faster in response to the change of pH in comparison with the conventional hydrogel without macroporous structure. Furthermore, the response rate is closely related to the porosity of the hydrogels, which could be easily controlled by modulating the concentration of the porogen in the medium. The circular swelling behavior of hydrogels indicated the formation of a relaxing three-dimensional network.展开更多
Oleic acid OA-modified CaCO3 nanoparticles were prepared using surface modification method. In- frared spectroscopy IR was used to investigate the structure of the modified CaCO3 nanoparticles, and the result showed t...Oleic acid OA-modified CaCO3 nanoparticles were prepared using surface modification method. In- frared spectroscopy IR was used to investigate the structure of the modified CaCO3 nanoparticles, and the result showed that OA attached to the surface of CaCO3 nanoparticles with the ionic bond. Effect of OA concentration on the dispersion stability of CaCO3 in heptane was also studied, and the result indicated that modified CaCO3 nanoparticles dispersed in heptane more stably than unmodified ones. The optimal proportion of OA to CaCO3 was established. The effect of modified CaCO3 nanoparticles on crystallization behavior of polypropylene PP was studied by means of DSC. It was found that CaCO3 significantly increased the crystallization temperature, crystal- lization degree and crystallization rate of PP, and the addition of modified CaCO3 nanoparticles can lead to the for- mation of β-crystal PP. Effect of the modified CaCO3 content on mechanical properties of PPCaCO3 nanocompo- sites was also studied. The results showed that the modified CaCO3 can effectively improve the mechanical proper- ties of PP. In comparison with PP, the impact strength of PPCaCO3 nanocomposites increased by about 65% and the flexural strength increased by about 20%.展开更多
The effect of N,N,N＇,N＇-tetraalkyl terephthalamide （TATA） on the non-isothermal crystallization and melting characteristics ofpolypropylene （PP） was studied. The addition of TATA can lead to the formation ofβ-c...The effect of N,N,N＇,N＇-tetraalkyl terephthalamide （TATA） on the non-isothermal crystallization and melting characteristics ofpolypropylene （PP） was studied. The addition of TATA can lead to the formation ofβ-crystal PP. With the increase in TATA concentration the degree of crystallinity for β-crystal PP increased significantly, and that for a-crystal PP decreased, which indicated that TATA effectively induced the formation of β-crystal PP. WAXD also revealed the existence of β-crystal PP after the introduction of TATA into PP. PP containing TATA crystallized at a temperature range of 5-10℃ higher than that of pure PP, and the half-crystallization time （t1/2） and Avrami exponent （n） of PP at the same cooling rate were decreased by the addition of TATA, indicating that TATA influenced the crystallization rate and crystallization growth mode of PP. The rate constant of crystallization of PP containing TATA （Zc） was larger than that of pure PP, which further indicated that the crystallization of PP was accelerated by the addition of TATA.展开更多
Acrylonitrile (AN) was copolymerized with N-isopropylacrylamide (NIPA) to synthesize thermosensitive hy-drogels, and the on-off switch behavior of poly(NIPA-co-AN) hydrogels with different fraction of hydrophobic comp...Acrylonitrile (AN) was copolymerized with N-isopropylacrylamide (NIPA) to synthesize thermosensitive hy-drogels, and the on-off switch behavior of poly(NIPA-co-AN) hydrogels with different fraction of hydrophobic compo-nent (AN) was investigated. It is found that the lower critical solution temperature (LCST), the swelling ratio at certain temperature and the reswelling rate of poly(NIPA-co-AN) hydrogels decreased as AN unit fraction in copolymers in-creased. In order to improve the responsive rate of poly(NIPA-co-AN) hydrogels, they were further treated by surface crosslinking using N, N′-methylene bisacrylamide (BIS) as a crosslinking agent. The swelling and deswelling behaviors of these copolymers were compared with those of the untreated hydrogels. The results indicated that the responsive rate of poly(NIPA-co-AN) hydrogel was improved by surface crosslinking. The resulting hydrogels bearing cyano groups with fast response have potential applications in the field of drug-controlled release and immobilization of biomolecules.展开更多
基金Supported by the National Natural Science Foundation of China (No. 29906009).
文摘Suspended emulsion polymerization of vinyl chloride was carried out in a 5 L autoclave. The influence of agitation, polymerization conversion, dispersant and surfactant on the average particle size (PS) and particle size distribution (PSD), particle morphology and porosity of polyvinyl chloride (PVC) resin was investigated. It showed that the agitator had great influence on the smooth operation of polymerization, PS and PSD. The PS increased and PSD became narrow as polymerization conversion became high. The porosity decreased with the increase of conversion. A convenient choice of additives, both dispersants and non-ionic surfactants, allows one to adjust PS and PSD. The PS decreased with the addition of polyvinyl alcohol or hydroxypropyl methylcellulose dispersants,and increased with the addition of Span surfactants. The addition of dispersants or surfactants also affected the morphology and porosity of resin, and PVC resin with looser agglomeration and homogeneous distribution of primary particles was prepared.
文摘Macroporous acrylonitrile-acrylic acid （AN-AA） copolymer hydrogels were synthesized by flee-radical solution polymerizations, using ammonium persulfate （APS）/N,N,N＇,N＇-tetramethylethylenediamine （TEMED） redox initiator system and alcohols porogens. The morphology, temperature and pH sensitive swelling behavior, and swelling kinetics of the resulting hydrogels were investigated. It was found that alcohol type and concentration had great influences on the pore structure and porosity of hydrogels. The pore size of hydrogel increases with the moderate increase of the length of alcohol alkyl chain. However, a further increase of alkyl length would result in the formation of cauliflower-like structure and the decrease of pore size. The porosity of hydrogels increases with the increase of porogen concentration in the polymerization medium. The hydrogels with macroporous structure swell or shrink much faster in response to the change of pH in comparison with the conventional hydrogel without macroporous structure. Furthermore, the response rate is closely related to the porosity of the hydrogels, which could be easily controlled by modulating the concentration of the porogen in the medium. The circular swelling behavior of hydrogels indicated the formation of a relaxing three-dimensional network.
基金the Scientific Research Foundation for the Returned Overseas Chinese Scholars
文摘Oleic acid OA-modified CaCO3 nanoparticles were prepared using surface modification method. In- frared spectroscopy IR was used to investigate the structure of the modified CaCO3 nanoparticles, and the result showed that OA attached to the surface of CaCO3 nanoparticles with the ionic bond. Effect of OA concentration on the dispersion stability of CaCO3 in heptane was also studied, and the result indicated that modified CaCO3 nanoparticles dispersed in heptane more stably than unmodified ones. The optimal proportion of OA to CaCO3 was established. The effect of modified CaCO3 nanoparticles on crystallization behavior of polypropylene PP was studied by means of DSC. It was found that CaCO3 significantly increased the crystallization temperature, crystal- lization degree and crystallization rate of PP, and the addition of modified CaCO3 nanoparticles can lead to the for- mation of β-crystal PP. Effect of the modified CaCO3 content on mechanical properties of PPCaCO3 nanocompo- sites was also studied. The results showed that the modified CaCO3 can effectively improve the mechanical proper- ties of PP. In comparison with PP, the impact strength of PPCaCO3 nanocomposites increased by about 65% and the flexural strength increased by about 20%.
基金This work was supported by the Scientific Research Foundation for Returned Overseas Chinese Scholars, Ministry of Education.
文摘The effect of N,N,N＇,N＇-tetraalkyl terephthalamide （TATA） on the non-isothermal crystallization and melting characteristics ofpolypropylene （PP） was studied. The addition of TATA can lead to the formation ofβ-crystal PP. With the increase in TATA concentration the degree of crystallinity for β-crystal PP increased significantly, and that for a-crystal PP decreased, which indicated that TATA effectively induced the formation of β-crystal PP. WAXD also revealed the existence of β-crystal PP after the introduction of TATA into PP. PP containing TATA crystallized at a temperature range of 5-10℃ higher than that of pure PP, and the half-crystallization time （t1/2） and Avrami exponent （n） of PP at the same cooling rate were decreased by the addition of TATA, indicating that TATA influenced the crystallization rate and crystallization growth mode of PP. The rate constant of crystallization of PP containing TATA （Zc） was larger than that of pure PP, which further indicated that the crystallization of PP was accelerated by the addition of TATA.
文摘Acrylonitrile (AN) was copolymerized with N-isopropylacrylamide (NIPA) to synthesize thermosensitive hy-drogels, and the on-off switch behavior of poly(NIPA-co-AN) hydrogels with different fraction of hydrophobic compo-nent (AN) was investigated. It is found that the lower critical solution temperature (LCST), the swelling ratio at certain temperature and the reswelling rate of poly(NIPA-co-AN) hydrogels decreased as AN unit fraction in copolymers in-creased. In order to improve the responsive rate of poly(NIPA-co-AN) hydrogels, they were further treated by surface crosslinking using N, N′-methylene bisacrylamide (BIS) as a crosslinking agent. The swelling and deswelling behaviors of these copolymers were compared with those of the untreated hydrogels. The results indicated that the responsive rate of poly(NIPA-co-AN) hydrogel was improved by surface crosslinking. The resulting hydrogels bearing cyano groups with fast response have potential applications in the field of drug-controlled release and immobilization of biomolecules.
