Background:Digital hemispherical photography(DHP)is widely used to estimate the leaf area index(LAI)of forest plots due to its advantages of high efficiency and low cost.A crucial step in the LAI estimation of forest ...Background:Digital hemispherical photography(DHP)is widely used to estimate the leaf area index(LAI)of forest plots due to its advantages of high efficiency and low cost.A crucial step in the LAI estimation of forest plots via DHP is choosing a sampling scheme.However,various sampling schemes involving DHP have been used for the LAI estimation of forest plots.To date,the impact of sampling schemes on LAI estimation from DHP has not been comprehensively investigated.Methods:In this study,13 commonly used sampling schemes which belong to five sampling types(i.e.dispersed,square,cross,transect and circle)were adopted in the LAI estimation of five Larix principis-rupprechtii plots(25m×25 m).An additional sampling scheme(with a sample size of 89)was generated on the basis of all the sample points of the 13 sampling schemes.Three typical inversion models and four canopy element clumping index(Ωe)algorithms were involved in the LAI estimation.The impacts of the sampling schemes on four variables,including gap fraction,Ωe,effective plant area index(PAIe)and LAI estimation from DHP were analysed.The LAI estimates obtained with different sampling schemes were then compared with those obtained from litter collection measurements.Results:Large differences were observed for all four variable estimates(i.e.gap fraction,Ωe,PAIe and LAI)under different sampling schemes.The differences in impact of sampling schemes on LAI estimation were not obvious for the three inversion models,if the fourΩe algorithms,except for the traditional gap-size analysis algorithm were adopted in the estimation.The accuracy of LAI estimation was not always improved with an increase in sample size.Moreover,results indicated that with the appropriate inversion model,Ωe algorithm and sampling scheme,the maximum estimation error of DHP-estimated LAI at elementary sampling unit can be less than 20%,which is required by the global climate observing system,except in forest plots with extremely large LAI values(~>6.0).However,obtaining an LAI from DHP with an estimation error lower than 5%is impossible regardless of which combination of inversion model,Ωe algorithm and sampling scheme is used.Conclusion:The LAI estimation of L.principis-rupprechtii forests from DHP was largely affected by the sampling schemes adopted in the estimation.Thus,the sampling scheme should be seriously considered in the LAI estimation.One square and two transect sampling schemes(with sample sizes ranging from 3 to 9)were recommended to be used to estimate the LAI of L.principis-rupprechtii forests with the smallest mean relative error(MRE).By contrast,three cross and one dispersed sampling schemes were identified to provide LAI estimates with relatively large MREs.展开更多
Biochemical components of Moso bamboo(Phyllostachys pubescens)are critical to physiological and ecological processes and play an important role in the material and energy cycles of the ecosystem.The coupled PROSPECT w...Biochemical components of Moso bamboo(Phyllostachys pubescens)are critical to physiological and ecological processes and play an important role in the material and energy cycles of the ecosystem.The coupled PROSPECT with SAIL(PROSAIL)radiative transfer model is widely used for vegetation biochemical component content inversion.However,the presence of leaf-eating pests,such as Pantana phyllostachysae Chao(PPC),weakens the performance of the model for estimating biochemical components of Moso bamboo and thus must be considered.Therefore,this study considered pest-induced stress signals associated with Sentinel-2A/B images and field data and established multiple sets of biochemical canopy reflectance look-up tables(LUTs)based on the PROSAIL framework by setting different parameter ranges according to infestation levels.Quantitative inversions of leaf area index(LAI),leaf chlorophyll content(LCC),and leaf equivalent water thickness(LEWT)were derived.The scale conversions from LCC to canopy chlorophyll content(CCC)and LEWT to canopy equivalent water thickness(CEWT)were calculated.The results showed that LAI,CCC,and CEWT were inversely related with PPC-induced stress.When applying multiple LUTs,the p-values were<0.01;the R2 values for LAI,CCC,and CEWT were 0.71,0.68,and 0.65 with root mean square error(RMSE)(normalized RMSE,NRMSE)values of 0.38(0.16),17.56μg cm-2(0.20),and 0.02 cm(0.51),respectively.Compared to the values obtained for the traditional PROSAIL model,for October,R2 values increased by 0.05 and 0.10 and NRMSE decreased by 0.09 and 0.02 for CCC and CEWT,respectively and RMSE decreased by 0.35μg cm-2 for CCC.The feasibility of the inverse strategy for integrating pest-induced stress factors into the PROSAIL model,while establishing multiple LUTs under different pest-induced damage levels,was successfully demonstrated and can potentially enhance future vegetation parameter inversion and monitoring of bamboo forest health and ecosystems.展开更多
Investigating urban expansion patterns aids in the management of urbanization and in ameliorating the socioeconomic and environmental issues associated with economic transformation and sustainable development.Applying...Investigating urban expansion patterns aids in the management of urbanization and in ameliorating the socioeconomic and environmental issues associated with economic transformation and sustainable development.Applying Harmonized Defense Meteorological Satellite Program-Operational Line-scan System(DMSP-OLS)and the Suomi National Polar-Orbiting Partnership-Visible Infrared Imagery Radiometer Suite(NPP-VIIRS)Nighttime Light(NTL)data,this paper investigated the characteristics of urban landscape in West Africa.Using the harmonized NTL data,spatial comparison and empirical threshold methods were employed to detect urban changes from 1993 to 2018.We examined the rate of urban change and calculated the direction of the urban expansion of West Africa using the center-of-gravity method for urban areas.In addition,we used the landscape expansion index method to assess the processes and stages of urban growth in West Africa.The accuracy of urban area extraction based on NTL data were R^(2)=0.8314 in 2000,R^(2)=0.8809 in 2006,R^(2)=0.9051 in 2012 for the DMSP-OLS and the simulated NPP-VIIRS was R^(2)=0.8426 in 2018,by using Google Earth images as validation.The results indicated that there was a high rate and acceleration of urban landscapes in West Africa,with rates of 0.0160,0.0173,0.0189,and 0.0686,and accelerations of 0.31,0.42,0.54,and 0.90 for the periods of 1998–2003,2003–2008,2008–2013,and 2013–2018,respectively.The expansion direction of urban agglomeration in West Africa during 1993–2018 was mainly from the coast to inland.However,cities located in the Sahel Region of Africa and in the middle zone expanded from north to south.Finally,the results showed that the urban landscape of West Africa was mainly in a scattered and disordered’diffusion’process,whereas only a few cities located in coastal areas experiencing the process of’coalescence’according to urban growth phase theory.This study provides urban planners with relevant insights for the urban expansion characteristics of West Africa.展开更多
Landform classification,which is a key topic of geography,is of great significance to a wide range of fields including human construction,geological structure research,environmental governance,etc.Previous studies of ...Landform classification,which is a key topic of geography,is of great significance to a wide range of fields including human construction,geological structure research,environmental governance,etc.Previous studies of landform classification generally paid attention to the topographic or texture information,whilst the watershed spatial structure has not been used.This study developed a new landform classification method based on watershed geospatial structure.Via abstracting the landform into the internal and marginal structure,we adopted the gully weighted complex network(GWCN)and watershed boundary profile(WBP)to simulate the watershed geospatial structure.Introducing various indices to quantitatively depict the watershed geospatial structure,we conducted the landform classification on the Northern Shaanxi of Loess Plateau with a watershed-based strategy and established the classification map.The classified landform distribution has significant spatial aggregation and clear regional boundaries.Classification accuracy reached 89%and the kappa coefficient reached 0.87%.Besides,the proposed method has a positive response to some similar and complex landforms.In general,the present study first utilized the watershed geospatial structure to conduct landform classification and is an efficient landform classification method with well accuracy and universality,offering additional insights for landform classification and mapping.展开更多
International ports play critical roles in maintaining transportation flows and sustaining the effectiveness of global maritime logistics.Although the concept of versatile ports has been introduced to represent the sp...International ports play critical roles in maintaining transportation flows and sustaining the effectiveness of global maritime logistics.Although the concept of versatile ports has been introduced to represent the specific patterns that these ports play at the regional and global levels,there is still a need for the design and development of computational approaches that support these notions.This paper introduces a flexible multi-layer network approach for an international maritime network whose interest is that it offers a flexible model that favours the identification of the different transportation flows and versatile ports.The model is complemented by a series of structural indices complemented by a new overlap measure that evaluates the specific role of a given port across various transportation trades.The whole approach is implemented and experimented with using massive AIS maritime data that supports the automatic generation of the multi-layer network,and derivation of the structural measures while maintaining a flexible view of the maritime network.The experiments applied to the global maritime transportation network identify key versatile ports and highlight significant differences at the regional and trade flow levels.展开更多
We propose a fundamental theorem for eco-environmental surface modelling(FTEEM) in order to apply it into the fields of ecology and environmental science more easily after the fundamental theorem for Earth’s surface ...We propose a fundamental theorem for eco-environmental surface modelling(FTEEM) in order to apply it into the fields of ecology and environmental science more easily after the fundamental theorem for Earth’s surface system modeling(FTESM). The Beijing-Tianjin-Hebei(BTH) region is taken as a case area to conduct empirical studies of algorithms for spatial upscaling, spatial downscaling, spatial interpolation, data fusion and model-data assimilation, which are based on high accuracy surface modelling(HASM), corresponding with corollaries of FTEEM. The case studies demonstrate how eco-environmental surface modelling is substantially improved when both extrinsic and intrinsic information are used along with an appropriate method of HASM. Compared with classic algorithms, the HASM-based algorithm for spatial upscaling reduced the root-meansquare error of the BTH elevation surface by 9 m. The HASM-based algorithm for spatial downscaling reduced the relative error of future scenarios of annual mean temperature by 16%. The HASM-based algorithm for spatial interpolation reduced the relative error of change trend of annual mean precipitation by 0.2%. The HASM-based algorithm for data fusion reduced the relative error of change trend of annual mean temperature by 70%. The HASM-based algorithm for model-data assimilation reduced the relative error of carbon stocks by 40%. We propose five theoretical challenges and three application problems of HASM that need to be addressed to improve FTEEM.展开更多
As an effective organization form of geographic information,a geographic knowledge graph(GeoKG)facilitates numerous geography-related analyses and services.The completeness of triplets regarding geographic knowledge d...As an effective organization form of geographic information,a geographic knowledge graph(GeoKG)facilitates numerous geography-related analyses and services.The completeness of triplets regarding geographic knowledge determines the quality of GeoKG,thus drawing considerable attention in the related domains.Mass unstructured geographic knowledge scattered in web texts has been regarded as a potential source for enriching the triplets in GeoKGs.The crux of triplet extraction from web texts lies in the detection of key phrases indicating the correct geo-relations between geo-entities.However,the current methods for key-phrase detection are ineffective because the sparseness of the terms in the web texts describing geo-relations results in an insufficient training corpus.In this study,an unsupervised context-enhanced method is proposed to detect geo-relation key phrases from web texts for extracting triplets.External semantic knowledge is introduced to relieve the influence of the sparseness of the georelation description terms in web texts.Specifically,the contexts of geo-entities are fused with category semantic knowledge and word semantic knowledge.Subsequently,an enhanced corpus is generated using frequency-based statistics.Finally,the geo-relation key phrases are detected from the enhanced contexts using the statistical lexical features from the enhanced corpus.Experiments are conducted with real web texts.In comparison with the well-known frequency-based methods,the proposed method improves the precision of detecting the key phrases of the geo-relation description by approximately 20%.Moreover,compared with the well-defined geo-relation properties in DBpedia,the proposed method provides quintuple key-phrases for indicating the geo-relations between geo-entities,which facilitate the generation of new triplets from web texts.展开更多
Building-level population data are of vital importance in disaster management,homeland security,and public health.Remotely sensed data,especially LiDAR data,which allow measures of three-dimensional morphological info...Building-level population data are of vital importance in disaster management,homeland security,and public health.Remotely sensed data,especially LiDAR data,which allow measures of three-dimensional morphological information,have been shown to be useful for fine-scale population estimations.However,studies using LiDAR data for population estimation have noted a nonstationary relationship between LiDAR-derived morphological indicators and populations due to the unbalanced characteristic of population distribution.In this article,we proposed a framework to estimate population at the building level by integrating POI data,nighttime light(NTL)data,and LiDAR data.Building objects were first derived using LiDAR data and aerial photographs.Then,three categories of building-level features,including geometric features,nighttime light intensity features,and POI features,were,respectively,extracted from LiDAR data,Luojia1-01 NTL data,and POI data.Finally,a welltrained random forest model was built to estimate the population of each individual building.Huangpu District in Shanghai,China,was chosen to validate the proposed method.A comparison between the estimation result and reference data shows that the proposed method achieved a good accuracy with R^(2)=0:65 at the building level and R^(2)=0:79 at the community level.The NTL radiance intensity was found to have a positive relationship with population in residential areas,while a negative relationship was found in office and commercial areas.Our study has shown that by integrating both the three-dimensional morphological information derived from LiDAR data and the human activity information extracted from POI and NTL data,the accuracy of building-level population estimation can be improved.展开更多
基金the National Science Foundation of China(Grant Nos.41871233,41371330 , 41001203).
文摘Background:Digital hemispherical photography(DHP)is widely used to estimate the leaf area index(LAI)of forest plots due to its advantages of high efficiency and low cost.A crucial step in the LAI estimation of forest plots via DHP is choosing a sampling scheme.However,various sampling schemes involving DHP have been used for the LAI estimation of forest plots.To date,the impact of sampling schemes on LAI estimation from DHP has not been comprehensively investigated.Methods:In this study,13 commonly used sampling schemes which belong to five sampling types(i.e.dispersed,square,cross,transect and circle)were adopted in the LAI estimation of five Larix principis-rupprechtii plots(25m×25 m).An additional sampling scheme(with a sample size of 89)was generated on the basis of all the sample points of the 13 sampling schemes.Three typical inversion models and four canopy element clumping index(Ωe)algorithms were involved in the LAI estimation.The impacts of the sampling schemes on four variables,including gap fraction,Ωe,effective plant area index(PAIe)and LAI estimation from DHP were analysed.The LAI estimates obtained with different sampling schemes were then compared with those obtained from litter collection measurements.Results:Large differences were observed for all four variable estimates(i.e.gap fraction,Ωe,PAIe and LAI)under different sampling schemes.The differences in impact of sampling schemes on LAI estimation were not obvious for the three inversion models,if the fourΩe algorithms,except for the traditional gap-size analysis algorithm were adopted in the estimation.The accuracy of LAI estimation was not always improved with an increase in sample size.Moreover,results indicated that with the appropriate inversion model,Ωe algorithm and sampling scheme,the maximum estimation error of DHP-estimated LAI at elementary sampling unit can be less than 20%,which is required by the global climate observing system,except in forest plots with extremely large LAI values(~>6.0).However,obtaining an LAI from DHP with an estimation error lower than 5%is impossible regardless of which combination of inversion model,Ωe algorithm and sampling scheme is used.Conclusion:The LAI estimation of L.principis-rupprechtii forests from DHP was largely affected by the sampling schemes adopted in the estimation.Thus,the sampling scheme should be seriously considered in the LAI estimation.One square and two transect sampling schemes(with sample sizes ranging from 3 to 9)were recommended to be used to estimate the LAI of L.principis-rupprechtii forests with the smallest mean relative error(MRE).By contrast,three cross and one dispersed sampling schemes were identified to provide LAI estimates with relatively large MREs.
基金funded by the National Natural Science Foundation of China(42071300)the Fujian Province Natural Science(2020J01504)+4 种基金the China Postdoctoral Science Foundation(2018M630728)the Open Fund of Fujian Provincial Key Laboratory of Resources and Environment Monitoring&Sustainable Management and Utilization(ZD202102)the Program for Innovative Research Team in Science and Technology in Fujian Province University(KC190002)the Open Fund of University Key Lab of Geomatics Technology and Optimize Resources Utilization in Fujian Province(fafugeo201901)supported by the Research Project of Jinjiang Fuda Science and Education Park Development Center(2019-JJFDKY-17)。
文摘Biochemical components of Moso bamboo(Phyllostachys pubescens)are critical to physiological and ecological processes and play an important role in the material and energy cycles of the ecosystem.The coupled PROSPECT with SAIL(PROSAIL)radiative transfer model is widely used for vegetation biochemical component content inversion.However,the presence of leaf-eating pests,such as Pantana phyllostachysae Chao(PPC),weakens the performance of the model for estimating biochemical components of Moso bamboo and thus must be considered.Therefore,this study considered pest-induced stress signals associated with Sentinel-2A/B images and field data and established multiple sets of biochemical canopy reflectance look-up tables(LUTs)based on the PROSAIL framework by setting different parameter ranges according to infestation levels.Quantitative inversions of leaf area index(LAI),leaf chlorophyll content(LCC),and leaf equivalent water thickness(LEWT)were derived.The scale conversions from LCC to canopy chlorophyll content(CCC)and LEWT to canopy equivalent water thickness(CEWT)were calculated.The results showed that LAI,CCC,and CEWT were inversely related with PPC-induced stress.When applying multiple LUTs,the p-values were<0.01;the R2 values for LAI,CCC,and CEWT were 0.71,0.68,and 0.65 with root mean square error(RMSE)(normalized RMSE,NRMSE)values of 0.38(0.16),17.56μg cm-2(0.20),and 0.02 cm(0.51),respectively.Compared to the values obtained for the traditional PROSAIL model,for October,R2 values increased by 0.05 and 0.10 and NRMSE decreased by 0.09 and 0.02 for CCC and CEWT,respectively and RMSE decreased by 0.35μg cm-2 for CCC.The feasibility of the inverse strategy for integrating pest-induced stress factors into the PROSAIL model,while establishing multiple LUTs under different pest-induced damage levels,was successfully demonstrated and can potentially enhance future vegetation parameter inversion and monitoring of bamboo forest health and ecosystems.
基金Under the auspices of National Natural Science Foundation of China(No.41971202)。
文摘Investigating urban expansion patterns aids in the management of urbanization and in ameliorating the socioeconomic and environmental issues associated with economic transformation and sustainable development.Applying Harmonized Defense Meteorological Satellite Program-Operational Line-scan System(DMSP-OLS)and the Suomi National Polar-Orbiting Partnership-Visible Infrared Imagery Radiometer Suite(NPP-VIIRS)Nighttime Light(NTL)data,this paper investigated the characteristics of urban landscape in West Africa.Using the harmonized NTL data,spatial comparison and empirical threshold methods were employed to detect urban changes from 1993 to 2018.We examined the rate of urban change and calculated the direction of the urban expansion of West Africa using the center-of-gravity method for urban areas.In addition,we used the landscape expansion index method to assess the processes and stages of urban growth in West Africa.The accuracy of urban area extraction based on NTL data were R^(2)=0.8314 in 2000,R^(2)=0.8809 in 2006,R^(2)=0.9051 in 2012 for the DMSP-OLS and the simulated NPP-VIIRS was R^(2)=0.8426 in 2018,by using Google Earth images as validation.The results indicated that there was a high rate and acceleration of urban landscapes in West Africa,with rates of 0.0160,0.0173,0.0189,and 0.0686,and accelerations of 0.31,0.42,0.54,and 0.90 for the periods of 1998–2003,2003–2008,2008–2013,and 2013–2018,respectively.The expansion direction of urban agglomeration in West Africa during 1993–2018 was mainly from the coast to inland.However,cities located in the Sahel Region of Africa and in the middle zone expanded from north to south.Finally,the results showed that the urban landscape of West Africa was mainly in a scattered and disordered’diffusion’process,whereas only a few cities located in coastal areas experiencing the process of’coalescence’according to urban growth phase theory.This study provides urban planners with relevant insights for the urban expansion characteristics of West Africa.
基金supported by the National Natural Science Foundation of China[grant numbers 41771423,41491339,41771423,41491339,41930102,and 41601408,41771423,41930102,41601408,and 41491339].
文摘Landform classification,which is a key topic of geography,is of great significance to a wide range of fields including human construction,geological structure research,environmental governance,etc.Previous studies of landform classification generally paid attention to the topographic or texture information,whilst the watershed spatial structure has not been used.This study developed a new landform classification method based on watershed geospatial structure.Via abstracting the landform into the internal and marginal structure,we adopted the gully weighted complex network(GWCN)and watershed boundary profile(WBP)to simulate the watershed geospatial structure.Introducing various indices to quantitatively depict the watershed geospatial structure,we conducted the landform classification on the Northern Shaanxi of Loess Plateau with a watershed-based strategy and established the classification map.The classified landform distribution has significant spatial aggregation and clear regional boundaries.Classification accuracy reached 89%and the kappa coefficient reached 0.87%.Besides,the proposed method has a positive response to some similar and complex landforms.In general,the present study first utilized the watershed geospatial structure to conduct landform classification and is an efficient landform classification method with well accuracy and universality,offering additional insights for landform classification and mapping.
基金supported by the National Natural Science Foundation of China[grant number 42001391]the Yongth Project of Innovation LREIS[grant number YPI002]The authors also appreciate the Chinese Academy of Sciences President's International Fellowship Initiative[grant number 2021VTA0002].
文摘International ports play critical roles in maintaining transportation flows and sustaining the effectiveness of global maritime logistics.Although the concept of versatile ports has been introduced to represent the specific patterns that these ports play at the regional and global levels,there is still a need for the design and development of computational approaches that support these notions.This paper introduces a flexible multi-layer network approach for an international maritime network whose interest is that it offers a flexible model that favours the identification of the different transportation flows and versatile ports.The model is complemented by a series of structural indices complemented by a new overlap measure that evaluates the specific role of a given port across various transportation trades.The whole approach is implemented and experimented with using massive AIS maritime data that supports the automatic generation of the multi-layer network,and derivation of the structural measures while maintaining a flexible view of the maritime network.The experiments applied to the global maritime transportation network identify key versatile ports and highlight significant differences at the regional and trade flow levels.
基金supported by the National Natural Science Foundation of China (Grant Nos. 41930647, 41590844, 41421001 & 41971358)the Strategic Priority Research Program (A) of the Chinese Academy of Sciences (Grant No. XDA20030203)+1 种基金the Innovation Project of LREIS (Grant No. O88RA600YA)the Biodiversity Investigation, Observation and Assessment Program (2019–2023) of the Ministry of Ecology and Environment of China。
文摘We propose a fundamental theorem for eco-environmental surface modelling(FTEEM) in order to apply it into the fields of ecology and environmental science more easily after the fundamental theorem for Earth’s surface system modeling(FTESM). The Beijing-Tianjin-Hebei(BTH) region is taken as a case area to conduct empirical studies of algorithms for spatial upscaling, spatial downscaling, spatial interpolation, data fusion and model-data assimilation, which are based on high accuracy surface modelling(HASM), corresponding with corollaries of FTEEM. The case studies demonstrate how eco-environmental surface modelling is substantially improved when both extrinsic and intrinsic information are used along with an appropriate method of HASM. Compared with classic algorithms, the HASM-based algorithm for spatial upscaling reduced the root-meansquare error of the BTH elevation surface by 9 m. The HASM-based algorithm for spatial downscaling reduced the relative error of future scenarios of annual mean temperature by 16%. The HASM-based algorithm for spatial interpolation reduced the relative error of change trend of annual mean precipitation by 0.2%. The HASM-based algorithm for data fusion reduced the relative error of change trend of annual mean temperature by 70%. The HASM-based algorithm for model-data assimilation reduced the relative error of carbon stocks by 40%. We propose five theoretical challenges and three application problems of HASM that need to be addressed to improve FTEEM.
基金This research was supported by the National Natural Science Foundation of China[41631177,41801320].
文摘As an effective organization form of geographic information,a geographic knowledge graph(GeoKG)facilitates numerous geography-related analyses and services.The completeness of triplets regarding geographic knowledge determines the quality of GeoKG,thus drawing considerable attention in the related domains.Mass unstructured geographic knowledge scattered in web texts has been regarded as a potential source for enriching the triplets in GeoKGs.The crux of triplet extraction from web texts lies in the detection of key phrases indicating the correct geo-relations between geo-entities.However,the current methods for key-phrase detection are ineffective because the sparseness of the terms in the web texts describing geo-relations results in an insufficient training corpus.In this study,an unsupervised context-enhanced method is proposed to detect geo-relation key phrases from web texts for extracting triplets.External semantic knowledge is introduced to relieve the influence of the sparseness of the georelation description terms in web texts.Specifically,the contexts of geo-entities are fused with category semantic knowledge and word semantic knowledge.Subsequently,an enhanced corpus is generated using frequency-based statistics.Finally,the geo-relation key phrases are detected from the enhanced contexts using the statistical lexical features from the enhanced corpus.Experiments are conducted with real web texts.In comparison with the well-known frequency-based methods,the proposed method improves the precision of detecting the key phrases of the geo-relation description by approximately 20%.Moreover,compared with the well-defined geo-relation properties in DBpedia,the proposed method provides quintuple key-phrases for indicating the geo-relations between geo-entities,which facilitate the generation of new triplets from web texts.
基金supported by the National Natural Science Foundation of China(grant numbers 41871331,41801343,and 42001357).
文摘Building-level population data are of vital importance in disaster management,homeland security,and public health.Remotely sensed data,especially LiDAR data,which allow measures of three-dimensional morphological information,have been shown to be useful for fine-scale population estimations.However,studies using LiDAR data for population estimation have noted a nonstationary relationship between LiDAR-derived morphological indicators and populations due to the unbalanced characteristic of population distribution.In this article,we proposed a framework to estimate population at the building level by integrating POI data,nighttime light(NTL)data,and LiDAR data.Building objects were first derived using LiDAR data and aerial photographs.Then,three categories of building-level features,including geometric features,nighttime light intensity features,and POI features,were,respectively,extracted from LiDAR data,Luojia1-01 NTL data,and POI data.Finally,a welltrained random forest model was built to estimate the population of each individual building.Huangpu District in Shanghai,China,was chosen to validate the proposed method.A comparison between the estimation result and reference data shows that the proposed method achieved a good accuracy with R^(2)=0:65 at the building level and R^(2)=0:79 at the community level.The NTL radiance intensity was found to have a positive relationship with population in residential areas,while a negative relationship was found in office and commercial areas.Our study has shown that by integrating both the three-dimensional morphological information derived from LiDAR data and the human activity information extracted from POI and NTL data,the accuracy of building-level population estimation can be improved.
