Silicon suboxide(SiO_(x),x≈1)is promising in serving as an anode material for lithium-ion batteries with high capacity,but it has a low initial Coulombic efficiency(ICE)due to the irreversible formation of lithium si...Silicon suboxide(SiO_(x),x≈1)is promising in serving as an anode material for lithium-ion batteries with high capacity,but it has a low initial Coulombic efficiency(ICE)due to the irreversible formation of lithium silicates during the first cycle.In this work,we modify SiO_(x) by solid-phase Mg doping reaction using low-cost Mg powder as a reducing agent.We show that Mg reduces SiO_(2) in SiO_(x) to Si and forms MgSiO_(3) or Mg_(2)SiO_(4).The MgSiO_(3) or Mg_(2)SiO_(4) are mainly distributed on the surface of SiO_(x),which suppresses the irreversible lithium-ion loss and enhances the ICE of SiO_(x).However,the formation of MgSiO_(3) or Mg_(2)SiO_(4) also sacrifices the capacity of SiO_(x).Therefore,by controlling the reaction process between Mg and SiO_(x),we can tune the phase composition,proportion,and morphology of the Mg-doped SiO_(x) and manipulate the performance.We obtain samples with a capacity of 1226 mAh g^(–1) and an ICE of 84.12%,which show significant improvement over carbon-coated SiO_(x) without Mg doping.By the synergistical modification of both Mg doping and prelithiation,the capacity of SiO_(x) is further increased to 1477 mAh g^(–1) with a minimal compromise in the ICE(83.77%).展开更多
Potassium-ion batteries(KIBs)are considered the next powerful potential generation energy storage system because of substantial potassium resource availability and similar characteristics with lithium.Unfortunately,th...Potassium-ion batteries(KIBs)are considered the next powerful potential generation energy storage system because of substantial potassium resource availability and similar characteristics with lithium.Unfortunately,the actual application of KIBs is inferior to that of lithium-ion batteries(LIBs),in which the fi nite energy density,ordinary circular life,and underdeveloped fabrication technique dominate the key constraints.Various works have recently been directed to growing novel anode electrodes with superior electrochemical capability.Noticeably,metals/metal oxides materials(e.g.,Sb,Sn,Zn,SnO_(2),and MoO_(2))have been widely investigated as KIBs anodes because of high theoretical capacity,suggesting outstanding promise for high-energy KIBs.In this review,the latest research of metals/metal oxides electrodes for potassium storage is summarized.The major strategies to control the electrochemical property of metals/metal oxides electrodes are discussed.Finally,the future investigation foreground for these anode electrodes has been proposed.展开更多
Tetragonal barium titanate was synthesized from barium hydroxide octahydrate and titanium tetrachloride through a simple one-step hydrothermal method.The effect of different solvents on the crystal structure and morph...Tetragonal barium titanate was synthesized from barium hydroxide octahydrate and titanium tetrachloride through a simple one-step hydrothermal method.The effect of different solvents on the crystal structure and morphology of barium titanate nanoparticles during the hy-drothermal process was investigated.Except for ethylene glycol/water solvent,impurity-free barium titanate was synthesized in pure water,methanol/water,ethanol/water,and isopropyl alcohol/water mixed solvents.Compared with other alcohols,ethanol promotes the formation of a tetragonal structure.In addition,characterization studies confirm that particles synthesized in methanol/water,ethanol/water,and isopropyl al-cohol/water mixed solvents are smaller in size than those synthesized in pure water.In the case of alcohol-containing solvents,the particle size decreases in the order of isopropanol,ethanol,and methanol.Among all the media used in this study,ethanol/water is considered the optimum reaction media for barium titanate with high tetragonality(defined as the ratio of two lattice parameters c and a,c/a=1.0088)and small aver-age particle size(82 nm),which indicates its great application potential in multilayer ceramic capacitors.展开更多
Proteomic characterization of plasma is critical for the development of novel pharmacodynamic biomarkers.However,the vast dynamic range renders the profiling of proteomes extremely challenging.Here,we synthesized zeol...Proteomic characterization of plasma is critical for the development of novel pharmacodynamic biomarkers.However,the vast dynamic range renders the profiling of proteomes extremely challenging.Here,we synthesized zeolite NaY and developed a simple and rapid method to achieve comprehensive and deep profiling of the plasma proteome using the plasma protein corona formed on zeolite NaY.Specifically,zeolite NaY and plasma were co-incubated to form plasma protein corona on zeolite NaY(NaY-PPC),followed by conventional protein identification using liquid chromatography-tandem mass spectrometry.NaY was able to significantly enhance the detection of low-abundance plasma proteins,minimizing the“masking”effect caused by high-abundance proteins.The relative abundance of middleand low-abundance proteins increased substantially from 2.54%to 54.41%,and the top 20 highabundance proteins decreased from 83.63%to 25.77%.Notably,our method can quantify approximately 4000 plasma proteins with sensitivity up to pg/mL,compared to only about 600 proteins identified from untreated plasma samples.A pilot study based on plasma samples from 30 lung adenocarcinoma patients and 15 healthy subjects demonstrated that our method could successfully distinguish between healthy and disease states.In summary,this work provides an advantageous tool for the exploration of plasma proteomics and its translational applications.展开更多
As a thermosetting resin with excellent properties,epoxy resin is used in many areas such as electronics,transportation,aerospace,and other fields.However,its relatively low thermal conductivity limits its wide applic...As a thermosetting resin with excellent properties,epoxy resin is used in many areas such as electronics,transportation,aerospace,and other fields.However,its relatively low thermal conductivity limits its wide application in more demanding fields.Here,a three-dimensional carbon(3DC)network was prepared through NaCl template-assisted in situ chemical vapor deposition(CVD)and used to reinforce epoxy resin for enhancing its thermal conductivity.The 3DC was prepared with a molar ratio of sodium atom to carbon atom of 100:20,and argon atmosphere in CVD led to an optimal improvement in the thermal conductivity of epoxy resin.The thermal conductivity of epoxy resin increased by 18%when the filling content was 3 wt.%of 3DC network because of the high contact area,uniform dispersion,and enhanced formation of conductive paths with epoxy resin.As the amount of 3DC addition increases,the thermal conductivity of composites also increases.As an innovative exploration,the work presented in this paper is of great significance for the thermal conductivity application of epoxy resin in the future.展开更多
The proliferation of high-power,highly informationized,and highly integrated electronic devices and weapons equipment has given rise to increasingly conspicuous issues about electromagnetic(EM)pollution and thermal ac...The proliferation of high-power,highly informationized,and highly integrated electronic devices and weapons equipment has given rise to increasingly conspicuous issues about electromagnetic(EM)pollution and thermal accumulation.These issues,in turn,impose constraints on the performance of such equipment and jeopardize personnel safety.Carbon materials,owing to their diverse and modifiable structures,offer adjustable thermal and electric conductivity,rendering them highly promising for applications in fields such as thermal management and EM protection which have garnered extensive research and review.The pursuit of integrated device and equipment development has elevated the demand for multifunctional materials,prompting significant research into carbon-based composite materials that include both thermal management and EM protection functionalities.Notably,there are no relevant reviews on this topic at present.Consequently,this work consolidates research findings from recent years on carbon matrix composites exhibiting dual attributes of thermal management and EM protection.These attributes include thermally conductive electromagnetic interference(EMI)shielding materials,thermally insulating EMI shielding materials,thermally conductive EM wave(EMW)absorbing materials,and thermally insulating EMW absorbing materials.The paper elucidates the fundamental principles underpinning thermal conduction,thermal insulation,EMW absorbing,and EMI shielding.Additionally,it engages in discussions surrounding areas of contention,design strategies,and the functional properties of various material designs.Ultimately,the paper concludes by presenting the challenges encountered and potential research strategies about composites endowed with both thermal management and EM protection functionalities,while also envisaging the development of novel multifunctional EM protection materials.展开更多
A Cu-10wt%Fe composite was prepared through hot-pressed sintering,and the material was subsequently solution treated.The hot-pressed sintered and solution treated materials were rolled and aged.The precipitation behav...A Cu-10wt%Fe composite was prepared through hot-pressed sintering,and the material was subsequently solution treated.The hot-pressed sintered and solution treated materials were rolled and aged.The precipitation behavior and performance changes were systematically studied by using scanning electron microscopy and transmission electron microscopy.In contrast to the hot-pressed sintered specimen,the solution treatment significantly affects the thermal stability and properties of the Cu-10wt%Fe composite.The Cu-10wt%Fe composite was prepared after solid solution,cold rolling and aging at 773 K for 1 h,and it obtained excellent tensile strength of 494 MPa,uniform elongation of 16.3%,electrical conductivity of 51.1%IACS and softening temperature of 838 K.Mechanisms for the distinct difference in thermal stability and properties between hot-pressed sintered and solution treated specimens were analyzed.These findings provide a theoretical basis for designing high-performance Cu-based in-situ composites by post treatment.展开更多
A Ti4+-doped nano-structured AgSnO2 material was prepared using sol-gel method and characterized by X-ray diffraction (XRD), transmis-sion electron microscopy (TEM), and scanning electron microscopy (SEM). The results...A Ti4+-doped nano-structured AgSnO2 material was prepared using sol-gel method and characterized by X-ray diffraction (XRD), transmis-sion electron microscopy (TEM), and scanning electron microscopy (SEM). The results show that Ti4+ cations are successfully doped into the crystal lattice of SnO2, and thus significantly improve the electrical conductivity of the sample. Furthermore, the coating of Ag on Ti4+-doped SnO2 nano-sized particles enhances the surface wettability and enables the resulting AgSnO2 material to have better mechanical properties.展开更多
A kind of slow release drug-loaded microspheres were prepared with gelatin, chitosan and montmorillonite(MMT) by an emulsification/chemical cross-linking method using glutaraldehyde as cross-linking agent and acyclovi...A kind of slow release drug-loaded microspheres were prepared with gelatin, chitosan and montmorillonite(MMT) by an emulsification/chemical cross-linking method using glutaraldehyde as cross-linking agent and acyclovir as model drug. The microspheres were characterized by X-ray diffraction (XRD), Fourier transform infrared (FT-IR) and scanning electron microscopy (SEM), respectively. The morphology, drug content, encapsulation efficiency and drug-release behavior were investigated with different MMT contents. The experimental results indicated that intercalated microspheres could be prepared, the morphology of microspheres was markedly affected by MMT. The glomeration performance of uncross-linked microspheres was improved because of the physical cross-linking of MMT. Drug content and encapsulation efficiency were decreased when increased the content of MMT, but burst release and the drug release were significantly decreased with the addition of MMT. Effective physical cross-linking could be formed when added MMT, and MMT could reduce the content of toxic chemical cross-linking agents.展开更多
Three types of carbon nano-onions(CNOs) including Ni@CNOs.Fe_3C@CNOs and Fe_(0.64)Ni_(0.36)@CNOs nanoparticles have been synthesized by catalytic decomposition of methane at 850 ℃ using nickel,iron and iron-nickel al...Three types of carbon nano-onions(CNOs) including Ni@CNOs.Fe_3C@CNOs and Fe_(0.64)Ni_(0.36)@CNOs nanoparticles have been synthesized by catalytic decomposition of methane at 850 ℃ using nickel,iron and iron-nickel alloy catalysts.Comparative and systematic studies have been carried out on the morphology,structural characteristics and graphitic crystallinity of these CNOs products.Furthermore,the electrochemical hydrogen storage properties of three types of CNOs have been investigated.Measurements show that the Ni@CNOs have the highest discharge capacity of 387.2 mAh/g,coiTesponding to a hydrogen storage of 1.42%.This comparison study shows the advantages of each catalyst in the growth of CNOs.enabling the controllable synthesis and tuning the properties of CNOs by mediating different metals and their alloy for using in the fuel cell system.展开更多
Anionic surfactant sodium dodecyl sulfate (SDS), cationic surfactant cetyl trimethyl ammonium bromide (CTAB) and acrylic acid (AA) were introduced as molecular models to study the interaction between montmorillonite a...Anionic surfactant sodium dodecyl sulfate (SDS), cationic surfactant cetyl trimethyl ammonium bromide (CTAB) and acrylic acid (AA) were introduced as molecular models to study the interaction between montmorillonite and organic molecules with different charge or chain length. The compounds were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and 13C nuclear magnetic resonance (13C NMR). The results show organic anion could interact strongly with montmorillonite, even the molecules could intercalate into the layers of MMT.展开更多
Type Ⅰ,Ⅲ and Ⅴ collagens were extracted from bovine dermis and cornea by using pepsin treatment in acetic acid solution,followed by salt precipitation and dialysis,to purify and isolate each type of collagens.The p...Type Ⅰ,Ⅲ and Ⅴ collagens were extracted from bovine dermis and cornea by using pepsin treatment in acetic acid solution,followed by salt precipitation and dialysis,to purify and isolate each type of collagens.The preparation process was analyzed by using sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE).A reducing agent,2-mercaptoethanol,was used to remove disulfide bonds and analyze the structure of the bonds involved between α chains in some types of collagens.The use of delayed reducing methods resulted in the difference between α1(Ⅲ) and α1(Ⅰ) chains in a mixture containing type Ⅰ and Ⅲ collagens.The structure of disulfide bonds among α chains exists potentially in type Ⅴ collagen prepared from the pepsin-treatment extraction at 4℃,which differs from type Ⅲ collagen in relation to the locations of disulfide bonds.Compared with pepsin-treated collagen at 4℃,the relative molecular weights of α1(Ⅴ) and α2(Ⅴ) chains treated at room temperature decrease by 4.6% and 6.0%,respectively.It is concluded that type Ⅰ,Ⅲ and Ⅴ collagens can be prepared from bovine dermis and cornea by the use of pepsin treatment,salt precipitation and dialysis.The interchain disulfide bonds lie potentially near the edges of termini of type Ⅴ collagen molecules in extracellular matrix,and a small number of interchain crosslinks exist in type Ⅴ collagen.展开更多
The corrosion process of tinplate in deaerated functional beverage was investigated by using electrochemical impedance spectroscopy (EIS) combined with scanning electron microscopy (SEM) and energy dispersive spectros...The corrosion process of tinplate in deaerated functional beverage was investigated by using electrochemical impedance spectroscopy (EIS) combined with scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) techniques. The results reveal that the uncoated tinplate shows a poor corrosion resistance and the corrosion type is detinning. During the initial stage of immersion, EIS spectrum consisted of two capacitance arcs with obvious time-constant dispersion effect, which was attributed to the two-dimensional and three-dimensional inhomogeneous distribution of the electrode surface. With the increase of immersion time, the capacitance arc of high frequency shrunk and degenerated, due to the corrosion of tin coating. The pore resistance of tin coating and the charger transfer resistance of substrate, which are determined from the electrochemical equivalent circuit, can be used as the indicators of tinplate corrosion process. The decrease of the pore resistance of tin coating indicates that the corrosion degree of tin layer becomes more severe, whereas the decrease of the charger transfer resistance of substrate implies that the corrosion degree of steel substrate also becomes more severe as the immersion time prolongs.展开更多
This paper reviews sulfur-induced passivity degradation of nuclear materials with emphasis on steam generator(SG)alloys. The state of arts on this topic concerning thermodynamic calculation and experimental data has b...This paper reviews sulfur-induced passivity degradation of nuclear materials with emphasis on steam generator(SG)alloys. The state of arts on this topic concerning thermodynamic calculation and experimental data has been reviewed. Thermodynamic calculation results indicate that the distribution of sulfur species strongly depends on p H and temperature. Experimental data show that solution p H, temperature and solution chemistries can significantly affect the electrochemical behaviors of SG materials and the underlying degradation mechanisms. Some issues when conducting corrosion tests at high temperature should be paid attention to, such as the dissolution of the autoclave, which may affect the facticity of the experimental results.展开更多
Stainless steel(SS)is one of the most widely used engineering materials in marine engineering.However,its corrosion in the marine atmospheric environment due to the high concentration of Cl-is a problem.The SS corrosi...Stainless steel(SS)is one of the most widely used engineering materials in marine engineering.However,its corrosion in the marine atmospheric environment due to the high concentration of Cl-is a problem.The SS corrosion is a threat to the development and security of marine industry;therefore,evaluating the corrosion resistance of SSs is necessary.In this work,atmospheric corrosion detection probes based on a symmetrical electrode system were used to study the corrosion behaviors of 304 SS and 2205 duplex stainless steel(DSS)in a simulated marine atmosphere.A theoretical model for electrochemical noise(EN)data analysis based on the Thevenin electrochemical equivalent circuit(EEC)model was established.The relationship between the EN characteristic parameters and the corrosion rate was obtained.The Thevenin EEC model analysis showed that the relationship between the noise resistance(Rn),the noise impedance[Rsn(f)],and the impedance modulus(|Z(f)|)was Rn≈Rsn=■.Thus,Rn and Rsn can be used as indicators for quantitative corrosion evaluation.The results of EN detection for the 304 SS and 2205 DSS showed that in a simulated marine atmospheric environment,the passive fi lms on the two SSs were relatively intact at the initial exposure stage,and their dissolution rates were slow.The corrosion resistance of the 2205 DSS was higher than that of the 304 SS.With the deposition of Cl-on the SS surface,pitting was initiated and the dissolution rate increased.The pitting initiation process on the SS surface was random,and part of the active pores could be repassivated.展开更多
Nanocomposites of poly[(2-methoxy,5-octoxy)1,4-phenylenevinylene]-zinc selenide (MOPPV-ZnSe) are synthesized by mixing the polymerization of 1,4-bis (chloromethyl)-2-methoxy-5-octoxy-benzene in the presence of ZnSe qu...Nanocomposites of poly[(2-methoxy,5-octoxy)1,4-phenylenevinylene]-zinc selenide (MOPPV-ZnSe) are synthesized by mixing the polymerization of 1,4-bis (chloromethyl)-2-methoxy-5-octoxy-benzene in the presence of ZnSe quantum dots. The resulting MOPPV-ZnSe nanocomposites possess a well-defined interfacial contact, thus significantly promoting the dispersion of ZnSe within the MOPPV matrix and facilitating the electronic interaction between these two components. Raman and UV-visible absorption spectra are influenced by the incorporation of ZnSe nanocrystals. High-resolution transmission electron microscopic and tapping-mode atomic force microscopic results show clearly the evidence for phase-segregated networks of ZnSe nanocrystals, which provide a large area of interface for charge sep- aration to occur. Steady-state spectra of MOPPV-ZnSe nanocomposites are markedly quenched by the introduction of intimate polymer/ZnSe junctions. Time-resolved photoluminescence measurements show that the lifetime decays quickly, which further confirms the occurrence of charge transfer in MOPPV-ZnSe nanocomposites.展开更多
Rechargeable zinc-air batteries(ZABs)have attracted much attention as the next-generation energy conversion and storage devices due to the abundance and environmental friendliness of zinc(Zn)for anode materials,as wel...Rechargeable zinc-air batteries(ZABs)have attracted much attention as the next-generation energy conversion and storage devices due to the abundance and environmental friendliness of zinc(Zn)for anode materials,as well as the safety and low cost of aqueous electrolytes.However,rational design of nonprecious and low-cost integrated air cathode materials with a desirable bifunctional oxygen electrocatalytic performance remains a great challenge for the commercialization of rechargeable ZABs.In previous research studies,various cost-effective carbon-supported electrocatalysts and light-weight carbon-based current collectors for air cathodes have been developed,showing vast potential in the application of carbon-based materials.To improve the bifunctional performance and integration of air cathodes,efforts with respect to the design of morphology,defects,and synergistic effects of carbon-based materials have been made.In this perspective,the general understanding of the air cathode construction and the battery working mechanism is discussed.The recent progress in the design of carbon-based materials for air cathodes in rechargeable ZABs is summarized.Several possible future research directions and the expected development trends are also discussed,aiming to facilitate the commercialization of advanced rechargeable ZABs in our life.展开更多
Objective:The introduction of therapeutic antibodies(tAbs)into clinical practice has revolutionized tumor treatment strategies,but their tumor therapy efficiency is still far below expectations because of the rapid de...Objective:The introduction of therapeutic antibodies(tAbs)into clinical practice has revolutionized tumor treatment strategies,but their tumor therapy efficiency is still far below expectations because of the rapid degradation and limited tumor accumulation of tAbs.Methods:We developed a nanocapsule-based delivery system to induce the self-augmentation of the enhanced permeability and retention(EPR)effect.This system constantly penetrated across the blood-tumor barrier into the tumor while avoiding the attack of tAbs by the immune system.The biodistribution and therapeutic effect were tested with single dose administration of nanocapsule-tAbs in vivo.Results:The accumulation of Nano(cetuximab)within subcutaneous PC9 tumors was gradually enhanced over 6 days after single dose administration,which was contrary to the biodistribution of native cetuximab.Nano(cetuximab)accumulated in tumor tissues via the EPR effect and released cetuximab.The released cetuximab acted on vascular endothelial cells to destroy the blood-tumor barrier and induce self-augmentation of the EPR effect,which in turn contributed to further tumor accumulation of long-circulating Nano(cetuximab).Compared with single dose administration of native cetuximab,Nano(cetuximab)showed an effective tumor suppressive effect for 3 weeks.Conclusions:The nanocapsule-based delivery system efficiently delivered tAbs to tum or tissues and released them to boost the EPR effect,which facilitated further tumor accumulation of the tAbs.This novel self-augmentation of the EPR effect facilitated by the biological characteristics of tAbs and nanotechnology contributed to the improvement of the therapeutic effect of tAbs,and stimulated new ideas for antibody-based tumor therapy.展开更多
In order to encapsulate and controlled-release bioactive proteins,three fibrous membranes,i.e.,poly(L-lactide-co-glycolide)(PLGA),hybrid PLGA and chitosan(H-PLGA/CS),and core/shell PLGA/CS (C-PLGA/CS),were produced by...In order to encapsulate and controlled-release bioactive proteins,three fibrous membranes,i.e.,poly(L-lactide-co-glycolide)(PLGA),hybrid PLGA and chitosan(H-PLGA/CS),and core/shell PLGA/CS (C-PLGA/CS),were produced by emulsion electrospinning,co-electrospinning and coaxial electrospinning,respectively.Bovine serum albumin(BSA) was selected as a model protein.The loading efficiency of BSA in the PLGA membrane was 1.56%,lower than those of H-PLGA/CS(5.98%) and C-PLGA/CS(4.80%).BSA release profiles from the three membranes showed initial burst releases in the first 7 d and then sustained release for 28 d.Cumulative releases at the end of the releasing period,28 d,from the above three membranes were nearly 63%,88% and 94%,respectively,indicating that the introduction of chitosan and the core/shell fiber structure could enhance BSA release rate.In addition,all these electrospun membranes could retain their fibrous morphologies after in vitro release of BSA for 28 d.展开更多
In the present work,hierarchical nanostructured titanium dioxide(TiO2) films were fabricated on Ti-25Nb-3Mo-2Sn-3Zr(TLM) alloy for biomedical applications via one-step anodization process in ethylene glycolbased elect...In the present work,hierarchical nanostructured titanium dioxide(TiO2) films were fabricated on Ti-25Nb-3Mo-2Sn-3Zr(TLM) alloy for biomedical applications via one-step anodization process in ethylene glycolbased electrolyte containing 0.5wt% NH4F.The nanostructured TiO2 films exhibited three distinct types depending on the anodization time:top irregular nanopores(INP)/beneath regular nanopores(RNP),top INP/middle regular nanotubes(RNT)/bottom RNP and top RNT with underlying RNP.The evolution of the nanostructured TiO2 films with anodization time demonstrated that self-organizing nanopores formed at the very beginning and individual nanotubes originated from underlying nanopore dissolution.Furthermore,a modified two-stage self-organizing mechanism was introduced to illustrate the growth of the nanostructured TiO2 films.Compared with TLM titanium alloy matrix,the TiO2 films with special nano-structure hold better hydrophilicity and higher specific surface area,which lays the foundation for their biomedical applications.展开更多
基金supported by the National Natural Science Foundation(52232009)the National Natural Science Foundation for Distinguished Young Scholar(52125404)+1 种基金the National Youth Talent Support Program,“131”First Level Innovative Talents Training Project in Tianjinthe Tianjin Natural Science Foundation for Distinguished Young Scholar(18JCJQJC46500).
文摘Silicon suboxide(SiO_(x),x≈1)is promising in serving as an anode material for lithium-ion batteries with high capacity,but it has a low initial Coulombic efficiency(ICE)due to the irreversible formation of lithium silicates during the first cycle.In this work,we modify SiO_(x) by solid-phase Mg doping reaction using low-cost Mg powder as a reducing agent.We show that Mg reduces SiO_(2) in SiO_(x) to Si and forms MgSiO_(3) or Mg_(2)SiO_(4).The MgSiO_(3) or Mg_(2)SiO_(4) are mainly distributed on the surface of SiO_(x),which suppresses the irreversible lithium-ion loss and enhances the ICE of SiO_(x).However,the formation of MgSiO_(3) or Mg_(2)SiO_(4) also sacrifices the capacity of SiO_(x).Therefore,by controlling the reaction process between Mg and SiO_(x),we can tune the phase composition,proportion,and morphology of the Mg-doped SiO_(x) and manipulate the performance.We obtain samples with a capacity of 1226 mAh g^(–1) and an ICE of 84.12%,which show significant improvement over carbon-coated SiO_(x) without Mg doping.By the synergistical modification of both Mg doping and prelithiation,the capacity of SiO_(x) is further increased to 1477 mAh g^(–1) with a minimal compromise in the ICE(83.77%).
基金This work was supported by the National Natural Science Foundation of China(No.91963113).
文摘Potassium-ion batteries(KIBs)are considered the next powerful potential generation energy storage system because of substantial potassium resource availability and similar characteristics with lithium.Unfortunately,the actual application of KIBs is inferior to that of lithium-ion batteries(LIBs),in which the fi nite energy density,ordinary circular life,and underdeveloped fabrication technique dominate the key constraints.Various works have recently been directed to growing novel anode electrodes with superior electrochemical capability.Noticeably,metals/metal oxides materials(e.g.,Sb,Sn,Zn,SnO_(2),and MoO_(2))have been widely investigated as KIBs anodes because of high theoretical capacity,suggesting outstanding promise for high-energy KIBs.In this review,the latest research of metals/metal oxides electrodes for potassium storage is summarized.The major strategies to control the electrochemical property of metals/metal oxides electrodes are discussed.Finally,the future investigation foreground for these anode electrodes has been proposed.
基金supported by Chongqing Newcent New Materials Co.,Ltd.,China (No.2021GKF-0708).
文摘Tetragonal barium titanate was synthesized from barium hydroxide octahydrate and titanium tetrachloride through a simple one-step hydrothermal method.The effect of different solvents on the crystal structure and morphology of barium titanate nanoparticles during the hy-drothermal process was investigated.Except for ethylene glycol/water solvent,impurity-free barium titanate was synthesized in pure water,methanol/water,ethanol/water,and isopropyl alcohol/water mixed solvents.Compared with other alcohols,ethanol promotes the formation of a tetragonal structure.In addition,characterization studies confirm that particles synthesized in methanol/water,ethanol/water,and isopropyl al-cohol/water mixed solvents are smaller in size than those synthesized in pure water.In the case of alcohol-containing solvents,the particle size decreases in the order of isopropanol,ethanol,and methanol.Among all the media used in this study,ethanol/water is considered the optimum reaction media for barium titanate with high tetragonality(defined as the ratio of two lattice parameters c and a,c/a=1.0088)and small aver-age particle size(82 nm),which indicates its great application potential in multilayer ceramic capacitors.
基金supported by the National Natural Science Foundation of China(Grant No:51773151)。
文摘Proteomic characterization of plasma is critical for the development of novel pharmacodynamic biomarkers.However,the vast dynamic range renders the profiling of proteomes extremely challenging.Here,we synthesized zeolite NaY and developed a simple and rapid method to achieve comprehensive and deep profiling of the plasma proteome using the plasma protein corona formed on zeolite NaY.Specifically,zeolite NaY and plasma were co-incubated to form plasma protein corona on zeolite NaY(NaY-PPC),followed by conventional protein identification using liquid chromatography-tandem mass spectrometry.NaY was able to significantly enhance the detection of low-abundance plasma proteins,minimizing the“masking”effect caused by high-abundance proteins.The relative abundance of middleand low-abundance proteins increased substantially from 2.54%to 54.41%,and the top 20 highabundance proteins decreased from 83.63%to 25.77%.Notably,our method can quantify approximately 4000 plasma proteins with sensitivity up to pg/mL,compared to only about 600 proteins identified from untreated plasma samples.A pilot study based on plasma samples from 30 lung adenocarcinoma patients and 15 healthy subjects demonstrated that our method could successfully distinguish between healthy and disease states.In summary,this work provides an advantageous tool for the exploration of plasma proteomics and its translational applications.
基金the Key Projects of Tianjin Natural Science Foundation(No.16ZXCLGX00130).
文摘As a thermosetting resin with excellent properties,epoxy resin is used in many areas such as electronics,transportation,aerospace,and other fields.However,its relatively low thermal conductivity limits its wide application in more demanding fields.Here,a three-dimensional carbon(3DC)network was prepared through NaCl template-assisted in situ chemical vapor deposition(CVD)and used to reinforce epoxy resin for enhancing its thermal conductivity.The 3DC was prepared with a molar ratio of sodium atom to carbon atom of 100:20,and argon atmosphere in CVD led to an optimal improvement in the thermal conductivity of epoxy resin.The thermal conductivity of epoxy resin increased by 18%when the filling content was 3 wt.%of 3DC network because of the high contact area,uniform dispersion,and enhanced formation of conductive paths with epoxy resin.As the amount of 3DC addition increases,the thermal conductivity of composites also increases.As an innovative exploration,the work presented in this paper is of great significance for the thermal conductivity application of epoxy resin in the future.
基金supported by the National Key R&D Program of China(No.2022YFB3805702)the National Natural Science Foundation of China(Nos.52173078,52130303,51973158,51803151,and 51973152)the Science Foundation for Distinguished Young Scholars in Tianjin(No.19JCJQJC61700).
文摘The proliferation of high-power,highly informationized,and highly integrated electronic devices and weapons equipment has given rise to increasingly conspicuous issues about electromagnetic(EM)pollution and thermal accumulation.These issues,in turn,impose constraints on the performance of such equipment and jeopardize personnel safety.Carbon materials,owing to their diverse and modifiable structures,offer adjustable thermal and electric conductivity,rendering them highly promising for applications in fields such as thermal management and EM protection which have garnered extensive research and review.The pursuit of integrated device and equipment development has elevated the demand for multifunctional materials,prompting significant research into carbon-based composite materials that include both thermal management and EM protection functionalities.Notably,there are no relevant reviews on this topic at present.Consequently,this work consolidates research findings from recent years on carbon matrix composites exhibiting dual attributes of thermal management and EM protection.These attributes include thermally conductive electromagnetic interference(EMI)shielding materials,thermally insulating EMI shielding materials,thermally conductive EM wave(EMW)absorbing materials,and thermally insulating EMW absorbing materials.The paper elucidates the fundamental principles underpinning thermal conduction,thermal insulation,EMW absorbing,and EMI shielding.Additionally,it engages in discussions surrounding areas of contention,design strategies,and the functional properties of various material designs.Ultimately,the paper concludes by presenting the challenges encountered and potential research strategies about composites endowed with both thermal management and EM protection functionalities,while also envisaging the development of novel multifunctional EM protection materials.
基金This work was supported by the National Natural Science Foundation of China(Grant No.52101181).
文摘A Cu-10wt%Fe composite was prepared through hot-pressed sintering,and the material was subsequently solution treated.The hot-pressed sintered and solution treated materials were rolled and aged.The precipitation behavior and performance changes were systematically studied by using scanning electron microscopy and transmission electron microscopy.In contrast to the hot-pressed sintered specimen,the solution treatment significantly affects the thermal stability and properties of the Cu-10wt%Fe composite.The Cu-10wt%Fe composite was prepared after solid solution,cold rolling and aging at 773 K for 1 h,and it obtained excellent tensile strength of 494 MPa,uniform elongation of 16.3%,electrical conductivity of 51.1%IACS and softening temperature of 838 K.Mechanisms for the distinct difference in thermal stability and properties between hot-pressed sintered and solution treated specimens were analyzed.These findings provide a theoretical basis for designing high-performance Cu-based in-situ composites by post treatment.
文摘A Ti4+-doped nano-structured AgSnO2 material was prepared using sol-gel method and characterized by X-ray diffraction (XRD), transmis-sion electron microscopy (TEM), and scanning electron microscopy (SEM). The results show that Ti4+ cations are successfully doped into the crystal lattice of SnO2, and thus significantly improve the electrical conductivity of the sample. Furthermore, the coating of Ag on Ti4+-doped SnO2 nano-sized particles enhances the surface wettability and enables the resulting AgSnO2 material to have better mechanical properties.
文摘A kind of slow release drug-loaded microspheres were prepared with gelatin, chitosan and montmorillonite(MMT) by an emulsification/chemical cross-linking method using glutaraldehyde as cross-linking agent and acyclovir as model drug. The microspheres were characterized by X-ray diffraction (XRD), Fourier transform infrared (FT-IR) and scanning electron microscopy (SEM), respectively. The morphology, drug content, encapsulation efficiency and drug-release behavior were investigated with different MMT contents. The experimental results indicated that intercalated microspheres could be prepared, the morphology of microspheres was markedly affected by MMT. The glomeration performance of uncross-linked microspheres was improved because of the physical cross-linking of MMT. Drug content and encapsulation efficiency were decreased when increased the content of MMT, but burst release and the drug release were significantly decreased with the addition of MMT. Effective physical cross-linking could be formed when added MMT, and MMT could reduce the content of toxic chemical cross-linking agents.
基金supported by the National Natural Science Foundation of China(51272173,51002188)the National Basic Research Program of China(2010CB934703)Tianjin Municipal Science and Technology Commission(12ZCZDGX00800)
文摘Three types of carbon nano-onions(CNOs) including Ni@CNOs.Fe_3C@CNOs and Fe_(0.64)Ni_(0.36)@CNOs nanoparticles have been synthesized by catalytic decomposition of methane at 850 ℃ using nickel,iron and iron-nickel alloy catalysts.Comparative and systematic studies have been carried out on the morphology,structural characteristics and graphitic crystallinity of these CNOs products.Furthermore,the electrochemical hydrogen storage properties of three types of CNOs have been investigated.Measurements show that the Ni@CNOs have the highest discharge capacity of 387.2 mAh/g,coiTesponding to a hydrogen storage of 1.42%.This comparison study shows the advantages of each catalyst in the growth of CNOs.enabling the controllable synthesis and tuning the properties of CNOs by mediating different metals and their alloy for using in the fuel cell system.
文摘Anionic surfactant sodium dodecyl sulfate (SDS), cationic surfactant cetyl trimethyl ammonium bromide (CTAB) and acrylic acid (AA) were introduced as molecular models to study the interaction between montmorillonite and organic molecules with different charge or chain length. The compounds were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and 13C nuclear magnetic resonance (13C NMR). The results show organic anion could interact strongly with montmorillonite, even the molecules could intercalate into the layers of MMT.
基金Supported by National Natural Science Foundation of China (No.30970724)Natural Science Foundation of Tianjin (No.08JCYBJC03400)
文摘Type Ⅰ,Ⅲ and Ⅴ collagens were extracted from bovine dermis and cornea by using pepsin treatment in acetic acid solution,followed by salt precipitation and dialysis,to purify and isolate each type of collagens.The preparation process was analyzed by using sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE).A reducing agent,2-mercaptoethanol,was used to remove disulfide bonds and analyze the structure of the bonds involved between α chains in some types of collagens.The use of delayed reducing methods resulted in the difference between α1(Ⅲ) and α1(Ⅰ) chains in a mixture containing type Ⅰ and Ⅲ collagens.The structure of disulfide bonds among α chains exists potentially in type Ⅴ collagen prepared from the pepsin-treatment extraction at 4℃,which differs from type Ⅲ collagen in relation to the locations of disulfide bonds.Compared with pepsin-treated collagen at 4℃,the relative molecular weights of α1(Ⅴ) and α2(Ⅴ) chains treated at room temperature decrease by 4.6% and 6.0%,respectively.It is concluded that type Ⅰ,Ⅲ and Ⅴ collagens can be prepared from bovine dermis and cornea by the use of pepsin treatment,salt precipitation and dialysis.The interchain disulfide bonds lie potentially near the edges of termini of type Ⅴ collagen molecules in extracellular matrix,and a small number of interchain crosslinks exist in type Ⅴ collagen.
基金Supported by National Key Basic Research Program of China ("973" Program, No. 2011CB610505)Specialized Research Fund for the Doctoral Program of Higher Education (No. 20120032110029)Key Project of Tianjin Natural Science Foundation (No. 13JCZDJC29500)
文摘The corrosion process of tinplate in deaerated functional beverage was investigated by using electrochemical impedance spectroscopy (EIS) combined with scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) techniques. The results reveal that the uncoated tinplate shows a poor corrosion resistance and the corrosion type is detinning. During the initial stage of immersion, EIS spectrum consisted of two capacitance arcs with obvious time-constant dispersion effect, which was attributed to the two-dimensional and three-dimensional inhomogeneous distribution of the electrode surface. With the increase of immersion time, the capacitance arc of high frequency shrunk and degenerated, due to the corrosion of tin coating. The pore resistance of tin coating and the charger transfer resistance of substrate, which are determined from the electrochemical equivalent circuit, can be used as the indicators of tinplate corrosion process. The decrease of the pore resistance of tin coating indicates that the corrosion degree of tin layer becomes more severe, whereas the decrease of the charger transfer resistance of substrate implies that the corrosion degree of steel substrate also becomes more severe as the immersion time prolongs.
基金Supported by the National Basic Research Program of China("973"Program,No.2014CB046805)National Natural Science Foundation of China(No.51131007,No.51371124)+1 种基金Natural Science Foundation of Tianjin(No.14JCYBJC17700)the Open-Ended Fund of the Key Laboratory of Nuclear Materials and Safety Assessment(Institute of Metal Research,Chinese Academy of Sciences,China)(No.2016NMSAKF02)
文摘This paper reviews sulfur-induced passivity degradation of nuclear materials with emphasis on steam generator(SG)alloys. The state of arts on this topic concerning thermodynamic calculation and experimental data has been reviewed. Thermodynamic calculation results indicate that the distribution of sulfur species strongly depends on p H and temperature. Experimental data show that solution p H, temperature and solution chemistries can significantly affect the electrochemical behaviors of SG materials and the underlying degradation mechanisms. Some issues when conducting corrosion tests at high temperature should be paid attention to, such as the dissolution of the autoclave, which may affect the facticity of the experimental results.
基金the National Natural Science Foundation of China(No.51701140)。
文摘Stainless steel(SS)is one of the most widely used engineering materials in marine engineering.However,its corrosion in the marine atmospheric environment due to the high concentration of Cl-is a problem.The SS corrosion is a threat to the development and security of marine industry;therefore,evaluating the corrosion resistance of SSs is necessary.In this work,atmospheric corrosion detection probes based on a symmetrical electrode system were used to study the corrosion behaviors of 304 SS and 2205 duplex stainless steel(DSS)in a simulated marine atmosphere.A theoretical model for electrochemical noise(EN)data analysis based on the Thevenin electrochemical equivalent circuit(EEC)model was established.The relationship between the EN characteristic parameters and the corrosion rate was obtained.The Thevenin EEC model analysis showed that the relationship between the noise resistance(Rn),the noise impedance[Rsn(f)],and the impedance modulus(|Z(f)|)was Rn≈Rsn=■.Thus,Rn and Rsn can be used as indicators for quantitative corrosion evaluation.The results of EN detection for the 304 SS and 2205 DSS showed that in a simulated marine atmospheric environment,the passive fi lms on the two SSs were relatively intact at the initial exposure stage,and their dissolution rates were slow.The corrosion resistance of the 2205 DSS was higher than that of the 304 SS.With the deposition of Cl-on the SS surface,pitting was initiated and the dissolution rate increased.The pitting initiation process on the SS surface was random,and part of the active pores could be repassivated.
基金Project supported by the National Natural Science Foundation of China (Grant No. 50873074)Program for New Century Excellent Talents in University of Chinese Education Ministry (Grant No. 060232)+1 种基金Foundation for Key Program of Ministry of Education, China (Grant No. 108029)Scientific Research Foundation of Xi’an Jiaotong University, China (Grant No.011092)
文摘Nanocomposites of poly[(2-methoxy,5-octoxy)1,4-phenylenevinylene]-zinc selenide (MOPPV-ZnSe) are synthesized by mixing the polymerization of 1,4-bis (chloromethyl)-2-methoxy-5-octoxy-benzene in the presence of ZnSe quantum dots. The resulting MOPPV-ZnSe nanocomposites possess a well-defined interfacial contact, thus significantly promoting the dispersion of ZnSe within the MOPPV matrix and facilitating the electronic interaction between these two components. Raman and UV-visible absorption spectra are influenced by the incorporation of ZnSe nanocrystals. High-resolution transmission electron microscopic and tapping-mode atomic force microscopic results show clearly the evidence for phase-segregated networks of ZnSe nanocrystals, which provide a large area of interface for charge sep- aration to occur. Steady-state spectra of MOPPV-ZnSe nanocomposites are markedly quenched by the introduction of intimate polymer/ZnSe junctions. Time-resolved photoluminescence measurements show that the lifetime decays quickly, which further confirms the occurrence of charge transfer in MOPPV-ZnSe nanocomposites.
基金This study was supported by the National Science Foundation for Excellent Young Scholar(51722403)National Natural Science Foundation of China(51771134)+2 种基金Tianjin Natural Science Foundation for Distinguished Young Scholar(18JCJQJC46500)National Natural Science Foundation of China and Guangdong Province(U1601216)the National Youth Talent Support Program.
文摘Rechargeable zinc-air batteries(ZABs)have attracted much attention as the next-generation energy conversion and storage devices due to the abundance and environmental friendliness of zinc(Zn)for anode materials,as well as the safety and low cost of aqueous electrolytes.However,rational design of nonprecious and low-cost integrated air cathode materials with a desirable bifunctional oxygen electrocatalytic performance remains a great challenge for the commercialization of rechargeable ZABs.In previous research studies,various cost-effective carbon-supported electrocatalysts and light-weight carbon-based current collectors for air cathodes have been developed,showing vast potential in the application of carbon-based materials.To improve the bifunctional performance and integration of air cathodes,efforts with respect to the design of morphology,defects,and synergistic effects of carbon-based materials have been made.In this perspective,the general understanding of the air cathode construction and the battery working mechanism is discussed.The recent progress in the design of carbon-based materials for air cathodes in rechargeable ZABs is summarized.Several possible future research directions and the expected development trends are also discussed,aiming to facilitate the commercialization of advanced rechargeable ZABs in our life.
基金the National Key Research and Development Program(Grant Nos.2016YFC0902502 and 2018YFA0209700)the National Natural Science Foundation of China(Grant Nos.81772667 and 51773151)the Special Construction Innovation Funded Project for Community in Beijing,Tianjin and Hebei of China(Grant No.18247792D).
文摘Objective:The introduction of therapeutic antibodies(tAbs)into clinical practice has revolutionized tumor treatment strategies,but their tumor therapy efficiency is still far below expectations because of the rapid degradation and limited tumor accumulation of tAbs.Methods:We developed a nanocapsule-based delivery system to induce the self-augmentation of the enhanced permeability and retention(EPR)effect.This system constantly penetrated across the blood-tumor barrier into the tumor while avoiding the attack of tAbs by the immune system.The biodistribution and therapeutic effect were tested with single dose administration of nanocapsule-tAbs in vivo.Results:The accumulation of Nano(cetuximab)within subcutaneous PC9 tumors was gradually enhanced over 6 days after single dose administration,which was contrary to the biodistribution of native cetuximab.Nano(cetuximab)accumulated in tumor tissues via the EPR effect and released cetuximab.The released cetuximab acted on vascular endothelial cells to destroy the blood-tumor barrier and induce self-augmentation of the EPR effect,which in turn contributed to further tumor accumulation of long-circulating Nano(cetuximab).Compared with single dose administration of native cetuximab,Nano(cetuximab)showed an effective tumor suppressive effect for 3 weeks.Conclusions:The nanocapsule-based delivery system efficiently delivered tAbs to tum or tissues and released them to boost the EPR effect,which facilitated further tumor accumulation of the tAbs.This novel self-augmentation of the EPR effect facilitated by the biological characteristics of tAbs and nanotechnology contributed to the improvement of the therapeutic effect of tAbs,and stimulated new ideas for antibody-based tumor therapy.
基金Supported by the National Natural Science Foundation of China(Nos.50273027,50573055,30828008)the Natural Science Foundation of Tianjin City,China(No.09JCZDJC18600)
文摘In order to encapsulate and controlled-release bioactive proteins,three fibrous membranes,i.e.,poly(L-lactide-co-glycolide)(PLGA),hybrid PLGA and chitosan(H-PLGA/CS),and core/shell PLGA/CS (C-PLGA/CS),were produced by emulsion electrospinning,co-electrospinning and coaxial electrospinning,respectively.Bovine serum albumin(BSA) was selected as a model protein.The loading efficiency of BSA in the PLGA membrane was 1.56%,lower than those of H-PLGA/CS(5.98%) and C-PLGA/CS(4.80%).BSA release profiles from the three membranes showed initial burst releases in the first 7 d and then sustained release for 28 d.Cumulative releases at the end of the releasing period,28 d,from the above three membranes were nearly 63%,88% and 94%,respectively,indicating that the introduction of chitosan and the core/shell fiber structure could enhance BSA release rate.In addition,all these electrospun membranes could retain their fibrous morphologies after in vitro release of BSA for 28 d.
基金Supported by the National Natural Science Foundation of China(No.51372169)Natural Science Foundation of Tianjin(No.11JCZDJC17300)
文摘In the present work,hierarchical nanostructured titanium dioxide(TiO2) films were fabricated on Ti-25Nb-3Mo-2Sn-3Zr(TLM) alloy for biomedical applications via one-step anodization process in ethylene glycolbased electrolyte containing 0.5wt% NH4F.The nanostructured TiO2 films exhibited three distinct types depending on the anodization time:top irregular nanopores(INP)/beneath regular nanopores(RNP),top INP/middle regular nanotubes(RNT)/bottom RNP and top RNT with underlying RNP.The evolution of the nanostructured TiO2 films with anodization time demonstrated that self-organizing nanopores formed at the very beginning and individual nanotubes originated from underlying nanopore dissolution.Furthermore,a modified two-stage self-organizing mechanism was introduced to illustrate the growth of the nanostructured TiO2 films.Compared with TLM titanium alloy matrix,the TiO2 films with special nano-structure hold better hydrophilicity and higher specific surface area,which lays the foundation for their biomedical applications.
